RESUMO
Carbon nanomembranes (CNMs), with a high density of subnanometer channels, enable superior salt separation performance compared to conventional membranes. However, defects that occur during the synthesis and transfer processes impede their technical realization on a macroscopic scale. Here, we introduce a practical and scalable interfacial polymerization method to effectively heal defects while preserving the subnanometer pores within CNMs. The defect-healed freestanding CNMs show an exceptional performance in forward osmosis (FO), achieving a water flux of 105 L m-2 h-1 and a specific reverse salt flux of 0.1 g L-1 when measured with 1 M NaCl as draw solution. This water flux is 10 times higher than that of commercially available FO membranes, and the reverse salt flux is 70% lower. Through successful implementation of the defect-healing method and support optimization, we demonstrate the synthesis of fully functional, centimeter-scale CNM-based composite membranes showing high water permeance and a high salt rejection. Our defect-healing method presents a promising pathway to overcome limitations in CNM synthesis, advancing their potential for practical salt separation applications.
RESUMO
Background: Cardiovascular diseases (CVDs) have been the major cause of mortality in type 2 diabetes. However, new approaches are still warranted since current diabetic medications, which focus mainly on glycemic control, do not effectively lower cardiovascular mortality rate in diabetic patients. Protocatechuic acid (PCA) is a phenolic acid widely distributed in garlic, onion, cauliflower and other plant-based foods. Given the anti-oxidative effects of PCA in vitro, we hypothesized that PCA would also have direct beneficial effects on endothelial function in addition to the systemic effects on vascular health demonstrated by previous studies. Methods and results: Since IL-1ß is the major pathological contributor to endothelial dysfunction in diabetes, the anti-inflammatory effects of PCA specific on endothelial cells were further verified by the use of IL-1ß-induced inflammation model. Direct incubation of db/db mouse aortas with physiological concentration of PCA significantly ameliorated endothelium-dependent relaxation impairment, as well as reactive oxygen species overproduction mediated by diabetes. In addition to the well-studied anti-oxidative activity, PCA demonstrated strong anti-inflammatory effects by suppressing the pro-inflammatory cytokines MCP1, VCAM1 and ICAM1, as well as increasing the phosphorylation of eNOS and Akt in the inflammatory endothelial cell model induced by the key player in diabetic endothelial dysfunction IL-1ß. Upon blocking of Akt phosphorylation, p-eNOS/eNOS remained low and the inhibition of pro-inflammatory cytokines by PCA ceased. Conclusion: PCA exerts protection on vascular endothelial function against inflammation through Akt/eNOS pathway, suggesting daily acquisition of PCA may be encouraged for diabetic patients.
RESUMO
A method for creating genuine nanopores in high area density on monolayer two-dimensional (2D) metallic oxides has been developed. By use of the strong reduction capability of hydroiodic acid, active metal ions, such as FeIII and CoIII, in 2D oxide nanosheets can be reduced to a divalent charge state (2+). The selective removal of FeO2 and CoO2 metal oxide units from the framework can be tuned to produce pores in a range of 1-4 nm. By monitoring of the redox reaction kinetics, the pore area density can be also tuned from â¼0.9 × 104 to â¼3.3 × 105 µm-2. The universality of this method to produce much smaller pores and higher area density than the previously reported ones has been proven in different oxide nanosheets. To demonstrate their potential applications, ultrasmall metal organic framework particles were grown inside the pores of perforated titania oxide nanosheets. The optimized hybrid film showed â¼100% rejection of methylene blue (MB) from the water. Its water permeance reached 4260 L m-2 h-1 bar-1, which is 1-3 orders of that for reported 2D membranes with good MB rejections.
RESUMO
The interfacial properties within a composite structure of membranes play a vital role in the separation properties and application performances. Building an interlayer can facilitate the formation of a highly selective layer as well as improve the interfacial properties of the composite membrane. However, it is difficult for a nanomaterial-based interlayer to increase the flux and retention of nanofiltration membranes simultaneously. Here, we report a nanofiltration membrane with a hybrid dimensional titania interlayer that exhibits excellent separation performance. The interlayer, composed of Fe-doped titania nanosheets and titania nanoparticles, helps the formation of an ultrathin (â¼30 nm thick) and defect-free polyamide selective layer with an ideal nanostructure. The hybrid dimensional interlayer endows the membrane with a superior permeability and alleviates flux decline. In addition, the rigid interlayer framework on a PVDF support drastically improves the pressure resistance of nanofiltration membranes and shows negligible flux loss up to 1.5 MPa of pressure.
RESUMO
A highly stretchable nanocomposite (NC) hydrogel was fabricated via in situ free radical polymerization of acrylamide. In particular, an exfoliated two-dimensional MXene (Ti3C2) nanosheet was utilized as a crosslinker instead of traditional organic crosslinkers. The exfoliated Ti3C2 nanosheets were confirmed by atomic force microscopy (AFM) and dynamic light scattering (DLS) measurements. Compared with traditional organic crosslinked N,N-methylene bisacrylamide (BIS)/polyacrylamide (PAM) hydrogels (fracture strength of 32.0 kPa and elongation of 109.6%), the synthesized Ti3C2/PAM NC hydrogels exhibited greatly improved mechanical properties with fracture strengths of 66.5 to 102.7 kPa, compressive strengths of 400.6 to 819.4 kPa and elongations at break of 2158.6% to 3047.5% as the Ti3C2 content increases from 0.0145% to 0.0436%. The enhanced mechanical performances can be attributed to the honeycomb-like fine structure with uniform pores as well as more flexible polymer chains in NC hydrogel networks. When loaded with drugs, Ti3C2/PAM NC hydrogels exhibited good sustained-release performance, higher drug loading amounts (97.5-127.7 mg g-1) and higher percentage releases (62.1-81.4%), greatly superior to those of the BIS/PAM hydrogel (46.4 mg g-1, 45.0%). Our work reveals the application of MXene materials in the fabrication of NC hydrogels with enhanced mechanical and drug release behaviors.
Assuntos
Resinas Acrílicas/química , Hidrogéis/química , Nanocompostos/química , Titânio/química , Cloranfenicol/química , Cloranfenicol/metabolismo , Portadores de Fármacos/química , Liberação Controlada de FármacosRESUMO
This work aimed at investigating electrocatalytic hydrodechlorination (ECH) mechanisms of chlorophenols (CPs) on a Pd-modified cathode. Experiments on the ECH of 2,4-dichlorophenol were conducted under extreme test conditions, i.e., with various buffer solutions and several sodium salt solutions as supporting electrolytes. Buffer solutions promote dechlorination due to their property of retarding the alkalinity of a solution. ECH was found to be significantly inhibited by sulfite. Experimental results showed that sulfite poisoning on Pd catalysts was reversible. Protonation may account, at least in part, for the observed high pH dependency of ECH, which proceeded rapidly, with lower apparent activation energy (E a) in the acidic electrolyte. In addition, pH influenced the selectivity of dechlorination of CPs. It was inferred that the ECH of CPs on the Pd-modified electrode was a preactivated electrocatalytic reaction.