Ecosystem multifunctionality is more related to the indirect effects than to the direct effects of human management in China's drylands.

Drylands provide a wide range of important ecosystem functions but are sensitive to environmental changes, especially human management. Two major land use types of drylands are grasslands and croplands, which are influenced by intensive grazing activities and agricultural management, respectively. However, little is known about whether the ecosystem functioning of these two land use types is predominated affected by human management, or environmental factors (intrinsic environmental factors and factors modified by human management). This limits our understanding of the ecosystem functions under intensive human management in drylands. Here we reported a study where we collected data from 40 grassland and 30 cropland sites along an extensive aridity gradient in China's drylands to quantify the effects of human management intensity, intrinsic environmental factors (i.e., aridity), and environmental factors modified by human management (i.e., soil bulk density and plant density) on specific ecosystem functions (ecosystem multifunctionality, productivity, carbon storage, soil water, and soil nutrients). We found that the relative importance of each function differed between croplands and grasslands. Ecosystem functions varied with human management intensity, with lower productivity and plant carbon storage in grasslands under high grazing intensity than un-grazed, while multifunctionality and carbon storage increased with greater fertilization only in arid croplands. Furthermore, among environmental factors, soil bulk density had the greatest negative effects, which directly reduced multifunctionality in grasslands and indirectly reduced multifunctionality in croplands via suppressing crop density. Crop density was the major environmental factor that positively related to multifunctionality in croplands. However, these effects would be exacerbated with increasing aridity. Our study demonstrated that compared with the direct impacts of human management, environmental factors modified by human management (e.g., soil bulk density) are the major drivers of ecosystem functions, indicating that improving soil structure by alleviating human interferences (e.g., reducing livestock trampling) would be an effective way to restore ecosystem functions in drylands under global warming and drying.

Soil Moisture and Soluble Salt Content Dominate Changes in Foliar δ13C and δ15N of Desert Communities in the Qaidam Basin, Qinghai-Tibetan Plateau.

Changing precipitation and temperature are principal drivers for nutrient cycling dynamics in drylands. Foliar isotopic carbon (C) and nitrogen (N) composition (δ13C and δ15N) are often used to describe the plant's water use efficiency and nitrogen use strategy in plant ecology research. However, the drivers and mechanisms under differential foliar δ13C and δ15N among plant species and communities are largely unknown for arid high-elevation regions. This study collected 462 leaf samples of ten top-dominant plant species (two or three replicates per species) across 16 sites in 2005 and 2010 to measure the community-weighted means (CWMs) of foliar δ13C and δ15N, northeastern Qaidam Basin, Qinghai-Tibetan Plateau. Our results showed that the CWM of foliar δ15N was higher in 2005 than in 2010 and was lower in the warm-dry season (July and August) than the cool-wet one (June and September) in 2010. Similarly, the CWM of foliar δ13C was higher in 2005 than in 2010, but no difference between warm-dry and cool-wet seasons in 2010. C4 plants have higher δ13C and generally grow faster than C3 species under warm-wet weathers. This might be why the CWM of foliar δ13C was high, while the CWM of foliar δ15N was low in the wet sampling year (2010). The general linear mixed models revealed that soil moisture was the most critical driver for the CWM of foliar δ15N, which explained 42.1% of the variance alone. However, the total soluble salt content was the crucial factor for the CWM of foliar δ13C, being responsible for 29.7% of the variance. Growing season temperature (GST) was the second most vital factor and explained 28.0% and 21.9% of the variance in the CWMs of foliar δ15N and δ13C. Meanwhile, remarkable differences in the CWMs of foliar δ15N and δ13C were also found at the species level. Specifically, Kalidium gracile and Salsola abrotanoides have higher foliar δ15N, while Ephedra sinica and Tamarix chinensis have lower foliar δ15N than other species. The foliar δ13C of Calligonum Kozlov and H. ammodendron was the highest among the ten species. Except for the foliar δ13C of E. sinica was higher than Ceratoide latens between the two sampling years or between the cool-wet and warm-dry seasons, no significant difference in foliar δ13C was found for other species. Overall, the CWMs of foliar δ15N and δ13C dynamics were affected by soil properties, wet-dry climate change, and species identity in high-elevation deserts on the Qinghai Tibetan Plateau.

Crystal structure of prothrombin reveals conformational flexibility and mechanism of activation.

The zymogen prothrombin is composed of fragment 1 containing a Gla domain and kringle-1, fragment 2 containing kringle-2, and a protease domain containing A and B chains. The prothrombinase complex assembled on the surface of platelets converts prothrombin to thrombin by cleaving at Arg-271 and Arg-320. The three-dimensional architecture of prothrombin and the molecular basis of its activation remain elusive. Here we report the first x-ray crystal structure of prothrombin as a Gla-domainless construct carrying an Ala replacement of the catalytic Ser-525. Prothrombin features a conformation 80 Å long, with fragment 1 positioned at a 36° angle relative to the main axis of fragment 2 coaxial to the protease domain. High flexibility of the linker connecting the two kringles suggests multiple arrangements for kringle-1 relative to the rest of the prothrombin molecule. Luminescence resonance energy transfer measurements detect two distinct conformations of prothrombin in solution, in a 3:2 ratio, with the distance between the two kringles either fully extended (54 ± 2 Å) or partially collapsed (≤34 Å) as seen in the crystal structure. A molecular mechanism of prothrombin activation emerges from the structure. Of the two sites of cleavage, Arg-271 is located in a disordered region connecting kringle-2 to the A chain, but Arg-320 is well defined within the activation domain and is not accessible to proteolysis in solution. Burial of Arg-320 prevents prothrombin autoactivation and directs prothrombinase to cleave at Arg-271 first. Reversal of the local electrostatic potential then redirects prothrombinase toward Arg-320, leading to thrombin generation via the prethrombin-2 intermediate.

Autoactivation of thrombin precursors.

Trypsin-like proteases are synthesized as inactive zymogens and convert to the mature form upon activation by specific enzymes, often assisted by cofactors. Central to this paradigm is that the zymogen does not convert spontaneously to the mature enzyme, which in turn does not feed back to activate its zymogen form. In the blood, the zymogens prothrombin and prethrombin-2 require the prothrombinase complex to be converted to the mature protease thrombin, which is unable to activate prothrombin or prethrombin-2. Here, we show that replacement of key residues within the activation domain causes these zymogens to spontaneously convert to thrombin. The conversion is started by the zymogen itself, which is capable of binding ligands at the active site, and is abrogated by inactivation of the catalytic residue Ser-195. The product of autoactivation is functionally and structurally equivalent to wild-type thrombin. Zymogen autoactivation is explained by conformational selection, a basic property of the trypsin fold uncovered by structural and rapid kinetics studies. Both the zymogen and protease undergo a pre-existing equilibrium between active and inactive forms. The equilibrium regulates catalytic activity in the protease and has the potential to unleash activity in the zymogen to produce autoactivation. A new strategy emerges for the facile production of enzymes through zymogen autoactivation that is broadly applicable to trypsin-like proteases of biotechnological and clinical interest.

Synthesis of α-Fe2O3 nanofibers for applications in removal and recovery of Cr(VI) from wastewater.

PURPOSE: Nanomaterials such as iron oxides and ferrites have been intensively investigated for water treatment and environmental remediation applications. The purpose of this work is to synthesize α-Fe(2)O(3) nanofibers for potential applications in removal and recovery of noxious Cr(VI) from wastewater. METHODS: α-Fe(2)O(3) nanofibers were synthesized via a simple hydrothermal route followed by calcination. The crystallographic structure and the morphology of the as-prepared α-Fe(2)O(3) nanofibers were characterized by X-ray diffraction, scanning electron microscope, and transmission electron microscope. Batch adsorption experiments were conducted, and Fourier transform infrared spectra were recorded before and after adsorption to investigate the Cr(VI) removal performance and adsorption mechanism. Langmuir and Freundlich modes were employed to analyze the adsorption behavior of Cr(VI) on the α-Fe(2)O(3) nanofibers. RESULTS: Very thin and porous α-Fe(2)O(3) nanofibers have been successfully synthesized for investigation of Cr(VI) removal capability from synthetic wastewater. Batch experiments revealed that the as-prepared α-Fe(2)O(3) nanofibers exhibited excellent Cr(VI) removal performance with a maximum adsorption capacity of 16.17 mg g(-1). Furthermore, the adsorption capacity almost kept unchanged after recycling and reusing. The Cr(VI) adsorption process was found to follow the pseudo-second-order kinetics model, and the corresponding thermodynamic parameters ΔG°, ΔH°, and ΔS° at 298 K were calculated to be -26.60 kJ mol(-1), -3.32 kJ mol(-1), and 78.12 J mol(-1) K(-1), respectively. CONCLUSIONS: The as-prepared α-Fe(2)O(3) nanofibers can be utilized as efficient low-cost nano-absorbents for removal and recovery of Cr(VI) from wastewater.

Crystallographic and kinetic evidence of allostery in a trypsin-like protease.

Protein allostery is based on the existence of multiple conformations in equilibrium linked to distinct functional properties. Although evidence of allosteric transitions is relatively easy to identify by functional studies, structural detection of a pre-existing equilibrium between alternative conformations remains challenging even for textbook examples of allosteric proteins. Kinetic studies show that the trypsin-like protease thrombin exists in equilibrium between two conformations where the active site is either collapsed (E*) or accessible to substrate (E). However, structural demonstration that the two conformations exist in the same enzyme construct free of ligands has remained elusive. Here we report the crystal structure of the thrombin mutant N143P in the E form, which complements the recently reported structure in the E* form, and both the E and E* forms of the thrombin mutant Y225P. The side chain of W215 moves 10.9 Å between the two forms, causing a displacement of 6.6 Å of the entire 215-217 segment into the active site that in turn opens or closes access to the primary specificity pocket. Rapid kinetic measurements of p-aminobenzamidine binding to the active site confirm the existence of the E*-E equilibrium in solution for wild-type and the mutants N143P and Y225P. These findings provide unequivocal proof of the allosteric nature of thrombin and lend strong support to the recent proposal that the E*-E equilibrium is a key property of the trypsin fold.

The role of Zn2+ on the structure and stability of murine adenosine deaminase.

Adenosine deaminase (ADA) is a key enzyme in purine metabolism and crucial for normal immune competence. It is a 40 kDa monomeric TIM-barrel protein containing a tightly bound Zn(2+), which is required for activity. In this study, we have investigated the role of Zn(2+) with respect to ADA structure and stability. After removing Zn(2+), the crystallographic structure of the protein remains highly ordered and similar to that of the holo protein with structural changes limited to regions capping the active site pocket. The stability of the protein, however, is decreased significantly in the absence of Zn(2+). Denaturation with urea shows the midpoint to be about 3.5 M for the apo enzyme, compared with 6.4 M for the holo enzyme. ADA contains four tryptophan residues distant from the Zn(2+) site. (19)F NMR studies in the presence and absence of Zn(2+) were carried out after incorporation of 6-(19)F-tryptophan. Chemical shift differences were observed for three of the four tryptophan residues, suggesting that, in contrast to the X-ray data, Zn(2+)-induced structural changes are propagated throughout the protein. Changes throughout the structure as suggested by the NMR data may explain the lower stability of the Zn(2+)-free protein. Real-time (19)F NMR spectroscopy measuring the loss of Zn(2+) showed that structural changes correlated with the loss of enzymatic activity.

Mutant N143P reveals how Na+ activates thrombin.

The molecular mechanism of thrombin activation by Na(+) remains elusive. Its kinetic formulation requires extension of the classical Botts-Morales theory for the action of a modifier on an enzyme to correctly account for the contribution of the E*, E, and E:Na(+) forms. The extended scheme establishes that analysis of k(cat) unequivocally identifies allosteric transduction of Na(+) binding into enhanced catalytic activity. The thrombin mutant N143P features no Na(+)-dependent enhancement of k(cat) yet binds Na(+) with an affinity comparable to that of wild type. Crystal structures of the mutant in the presence and absence of Na(+) confirm that Pro(143) abrogates the important H-bond between the backbone N atom of residue 143 and the carbonyl O atom of Glu(192), which in turn controls the orientation of the Glu(192)-Gly(193) peptide bond and the correct architecture of the oxyanion hole. We conclude that Na(+) activates thrombin by securing the correct orientation of the Glu(192)-Gly(193) peptide bond, which is likely flipped in the absence of cation. Absolute conservation of the 143-192 H-bond in trypsin-like proteases and the importance of the oxyanion hole in protease function suggest that this mechanism of Na(+) activation is present in all Na(+)-activated trypsin-like proteases.

Structure and function of 2,3-dimethylmalate lyase, a PEP mutase/isocitrate lyase superfamily member.

The Aspergillus niger genome contains four genes that encode proteins exhibiting greater than 30% amino acid sequence identity to the confirmed oxaloacetate acetyl hydrolase (OAH), an enzyme that belongs to the phosphoenolpyruvate mutase/isocitrate lyase superfamily. Previous studies have shown that a mutant A. niger strain lacking the OAH gene does not produce oxalate. To identify the function of the protein sharing the highest amino acid sequence identity with the OAH (An07g08390, Swiss-Prot entry Q2L887, 57% identity), we produced the protein in Escherichia coli and purified it for structural and functional studies. A focused substrate screen was used to determine the catalytic function of An07g08390 as (2R,3S)-dimethylmalate lyase (DMML): k(cat)=19.2 s(-1) and K(m)=220 microM. DMML also possesses significant OAH activity (k(cat)=0.5 s(-1) and K(m) =220 microM). DNA array analysis showed that unlike the A. niger oah gene, the DMML encoding gene is subject to catabolite repression. DMML is a key enzyme in bacterial nicotinate catabolism, catalyzing the last of nine enzymatic steps. This pathway does not have a known fungal counterpart. BLAST analysis of the A. niger genome for the presence of a similar pathway revealed the presence of homologs to only some of the pathway enzymes. This and the finding that A. niger does not thrive on nicotinamide as a sole carbon source suggest that the fungal DMML functions in a presently unknown metabolic pathway. The crystal structure of A. niger DMML (in complex with Mg(2+) and in complex with Mg(2+) and a substrate analog: the gem-diol of 3,3-difluoro-oxaloacetate) was determined for the purpose of identifying structural determinants of substrate recognition and catalysis. Structure-guided site-directed mutants were prepared and evaluated to test the contributions made by key active-site residues. In this article, we report the results in the broader context of the lyase branch of the phosphoenolpyruvate mutase/isocitrate lyase superfamily to provide insight into the evolution of functional diversity.

Identification of fungal oxaloacetate hydrolyase within the isocitrate lyase/PEP mutase enzyme superfamily using a sequence marker-based method.

Aspergillus niger produces oxalic acid through the hydrolysis of oxaloacetate, catalyzed by the cytoplasmic enzyme oxaloacetate acetylhydrolase (OAH). The A. niger genome encodes four additional open reading frames with strong sequence similarity to OAH yet only the oahA gene encodes OAH activity. OAH and OAH-like proteins form subclass of the isocitrate lyase/PEP mutase enzyme superfamily, which is ubiquitous present filamentous fungi. Analysis of function-specific residues using a superfamily-based approach revealed an active site serine as a possible sequence marker for OAH activity. We propose that presence of this serine in family members correlates with presence of OAH activity whereas its absence correlates with absence of OAH. This hypothesis was tested by carrying out a serine mutagenesis study with the OAH from the fungal oxalic acid producer Botrytis cinerea and the OAH active plant petal death protein as test systems.

Structure and function of PA4872 from Pseudomonas aeruginosa, a novel class of oxaloacetate decarboxylase from the PEP mutase/isocitrate lyase superfamily.

Pseudomonas aeruginosa PA4872 was identified by sequence analysis as a structurally and functionally novel member of the PEP mutase/isocitrate lyase superfamily and therefore targeted for investigation. Substrate screens ruled out overlap with known catalytic functions of superfamily members. The crystal structure of PA4872 in complex with oxalate (a stable analogue of the shared family alpha-oxyanion carboxylate intermediate/transition state) and Mg2+ was determined at 1.9 A resolution. As with other PEP mutase/isocitrate lyase superfamily members, the protein assembles into a dimer of dimers with each subunit adopting an alpha/beta barrel fold and two subunits swapping their barrel's C-terminal alpha-helices. Mg2+ and oxalate bind in the same manner as observed with other superfamily members. The active site gating loop, known to play a catalytic role in the PEP mutase and lyase branches of the superfamily, adopts an open conformation. The Nepsilon of His235, an invariant residue in the PA4872 sequence family, is oriented toward a C(2) oxygen of oxalate analogous to the C(3) of a pyruvyl moiety. Deuterium exchange into alpha-oxocarboxylate-containing compounds was confirmed by 1H NMR spectroscopy. Having ruled out known activities, the involvement of a pyruvate enolate intermediate suggested a decarboxylase activity of an alpha-oxocarboxylate substrate. Enzymatic assays led to the discovery that PA4872 decarboxylates oxaloacetate (kcat = 7500 s(-1) and Km = 2.2 mM) and 3-methyloxaloacetate (kcat = 250 s(-1) and Km = 0.63 mM). Genome context of the fourteen sequence family members indicates that the enzyme is used by select group of Gram-negative bacteria to maintain cellular concentrations of bicarbonate and pyruvate; however the decarboxylation activity cannot be attributed to a pathway common to the various bacterial species.

Oxaloacetate hydrolase, the C-C bond lyase of oxalate secreting fungi.

Oxalate secretion by fungi is known to be associated with fungal pathogenesis. In addition, oxalate toxicity is a concern for the commercial application of fungi in the food and drug industries. Although oxalate is generated through several different biochemical pathways, oxaloacetate acetylhydrolase (OAH)-catalyzed hydrolytic cleavage of oxaloacetate appears to be an especially important route. Below, we report the cloning of the Botrytis cinerea oahA gene and the demonstration that the disruption of this gene results in the loss of oxalate formation. In addition, through complementation we have shown that the intact B. cinerea oahA gene restores oxalate production in an Aspergillus niger mutant strain, lacking a functional oahA gene. These observations clearly indicate that oxalate production in A. niger and B. cinerea is solely dependent on the hydrolytic cleavage of oxaloacetate catalyzed by OAH. In addition, the B. cinera oahA gene was overexpressed in Escherichia coli and the purified OAH was used to define catalytic efficiency, substrate specificity, and metal ion activation. These results are reported along with the discovery of the mechanism-based, tight binding OAH inhibitor 3,3-difluorooxaloacetate (K(i) = 68 nM). Finally, we propose that cellular uptake of this inhibitor could reduce oxalate production.

Structure and kinetics of phosphonopyruvate hydrolase from Variovorax sp. Pal2: new insight into the divergence of catalysis within the PEP mutase/isocitrate lyase superfamily.

Phosphonopyruvate (P-pyr) hydrolase (PPH), a member of the phosphoenolpyruvate (PEP) mutase/isocitrate lyase (PEPM/ICL) superfamily, hydrolyzes P-pyr and shares the highest sequence identity and functional similarity with PEPM. Recombinant PPH from Variovorax sp. Pal2 was expressed in Escherichia coli and purified to homogeneity. Analytical gel filtration indicated that the protein exists in solution predominantly as a tetramer. The PPH pH rate profile indicates maximal activity over a broad pH range. The steady-state kinetic constants determined for a rapid equilibrium ordered kinetic mechanism with Mg2+ binding first (Kd = 140 +/- 40 microM), are kcat = 105 +/- 2 s(-1) and P-pyr Km = 5 +/- 1 microM. PEP (slow substrate kcat = 2 x 10(-4) s(-1)), oxalate, and sulfopyruvate are competitive inhibitors with Ki values of 2.0 +/- 0.1 mM, 17 +/- 1 microM, and 210 +/- 10 microM, respectively. Three PPH crystal structures have been determined, that of a ligand-free enzyme, the enzyme bound to Mg2+ and oxalate (inhibitor), and the enzyme bound to Mg2+ and P-pyr (substrate). The complex with the inhibitor was obtained by cocrystallization, whereas that with the substrate was obtained by briefly soaking crystals of the ligand-free enzyme with P-pyr prior to flash cooling. The PPH structure resembles that of the other members of the PEPM/ICL superfamily and is most similar to the functionally related enzyme, PEPM. Each monomer of the dimer of dimers exhibits an (alpha/beta)8 barrel fold with the eighth helix swapped between two molecules of the dimer. Both P-pyr and oxalate are anchored to the active site by Mg2+. The loop capping the active site is disordered in all three structures, in contrast to PEPM, where the equivalent loop adopts an open or disordered conformation in the unbound state but sequesters the inhibitor from solvent in the bound state. Crystal packing may have favored the open conformation of PPH even when the enzyme was cocrystallized with the oxalate inhibitor. Structure alignment of PPH with other superfamily members revealed two pairs of invariant or conservatively replaced residues that anchor the flexible gating loop. The proposed PPH catalytic mechanism is analogous to that of PEPM but includes activation of a water nucleophile with the loop Thr118 residue.