RESUMO
Poly(vinyl alcohol) (PVA) physical cryogels that contained the additives of o-, m-, and p-bis-phenols or phenol were prepared, and their physico-chemical characteristics and macroporous morphology and the solute release dynamics were evaluated. These phenolic additives caused changes in the viscosity of initial PVA solutions before their freeze-thaw processing and facilitated the growth in the rigidity of the resultant cryogels, while their heat endurance decreased. The magnitude of the effects depended on the interposition of phenolic hydroxyls in the molecules of the used additives and was stipulated by their H-bonding with PVA OH-groups. Subsequent rinsing of such "primary" cryogels with pure water led to the lowering of their rigidity. The average size of macropores inside these heterophase gels also depended on the additive type. It was found also that the release of phenolic substances from the additive-containing cryogels occurred via virtually a free diffusion mechanism; therefore, drug delivery systems such as PVA cryogels loaded with either pyrocatechol, resorcinol, hydroquinone, or phenol, upon the in vitro agar diffusion tests, exhibited antibacterial activity typical of these phenols. The promising biomedical potential of the studied nanocomposite gel materials is supposed.
RESUMO
ßL-crystallin aggregation due to oxidative damage in the presence of H2O2 and ferric chloride was studied in-vitro under conditions close to physiological. It was shown that the protein aggregation characterized by the nucleation time and the aggregation rate significantly depended on the composition of the isoosmotic buffers used, and decreased in the series HEPES buffer > Tris buffer > PBS. Ferric chloride at neutral pH was converted into water-insoluble iron hydroxide III (≡FeIIIOH). According to the data of scanning electron microscopy the ≡FeIIIOH particles formed in HEPES buffer, Tris buffer, and PBS practically did not differ in structure. However, the sizes of ≡FeIIIOH floating particles measured by dynamic light scattering differed significantly and were 44 ± 28 nm, 93 ± 66 nm, 433 ± 316 nm (Zaver ± SD) for HEPES buffer, Tris buffer, and PBS, respectively. It was found by the spin trap method that the ability of ≡FeIIIOH to decompose H2O2 with the formation of a â¢OH decreases in the series HEPES buffer, Tris buffer, and PBS. The authors suggest that the ability to generate â¢OH during the decomposition of H2O2 is determined by the total surface area of ≡FeIIIOH particles, which significantly depends on the composition of the buffer in which these particles are formed.
Assuntos
Cristalinas , Compostos de Ferro , HEPES/química , Trometamina , Peróxido de Hidrogênio , Estresse Oxidativo , Soluções Tampão , OxirreduçãoRESUMO
Various gelatin-containing gel materials are used as scaffolds for animal and human cell culturing within the fields of cell technologies and tissue engineering. Cryostructuring is a promising technique for the preparation of efficient macroporous scaffolds in biomedical applications. In the current study, two new gelatin-based cryostructurates were synthesized, their physicochemical properties and microstructure were evaluated, and their ability to serve as biocompatible scaffolds for mammalian cells culturing was tested. The preparation procedure included the dissolution of Type A gelatin in water, the addition of urea to inhibit self-gelation, the freezing of such a solution, ice sublimation in vacuo, and urea extraction with ethanol from the freeze-dried matter followed by its cross-linking in an ethanol medium with either carbodiimide or glyoxal. It was shown that in the former case, a denser cross-linked polymer phase was formed, while in the latter case, the macropores in the resultant biopolymer material were wider. The subsequent biotesting of these scaffolds demonstrated their biocompatibility for human mesenchymal stromal cells and HepG2 cells during subcutaneous implantation in rats. Albumin secretion and urea synthesis by HepG2 cells confirmed the possibility of using gelatin cryostructurates for liver tissue engineering.
RESUMO
The purpose of this study is the mechanical characterization of the mid-to- old-age human anterior lens capsules (ALCs) obtained by capsulorhexis using Atomic Force Microscopy (AFM) and a nanoindenter at different spatial scales. The dependencies on the human age, presence or absence of pseudoexfoliation syndrome (PEX), and application of trypan blue staining during the surgery were analyzed. The measurements on both the anterior (AS) and epithelial (ES) sides of the ALC were conducted and the effect of cells present on the epithelial side was carefully accounted for. The ES of the ALC had a homogenous distribution of the Young's modulus over the surface as shown by the macroscale mapping with the nanoindenter and local AFM indentations, while the AS was more heterogeneous. Age-related changes were assessed in groups ranging from the mid-age (from 48 years) to old-age (up to 93 years). We found that the ES was always stiffer than the AS, and this difference decreased with age due to a gradual decrease in the Young's modulus of the ES and an increase in the modulus of the AS. No significant changes were found in the mechanical properties of ALCs of PEX patients versus the PEX-free group, as well as in the properties of the ALC with and without trypan blue staining.
Assuntos
Síndrome de Exfoliação , Cápsula do Cristalino , Envelhecimento , Corantes , Humanos , Microscopia de Força Atômica , Pessoa de Meia-Idade , Coloração e Rotulagem , Azul TripanoRESUMO
One of the leading trends in the modern tissue engineering is the development of new effective methods of decellularization aimed at the removal of cellular components from a donor tissue, reducing its immunogenicity and the risk of rejection. Supercritical CO2 (scCO2)-assisted processing has been proposed to improve the outcome of decellularization, reduce contamination and time costs. The resulting products can serve as personalized tools for tissue-engineering therapy of various somatic pathologies. However, the decellularization of heterogeneous 3D structures, such as the aortic root, requires optimization of the parameters, including preconditioning medium composition, the type of co-solvent, values of pressure and temperature inside the scCO2 reactor, etc. In our work, using an ovine aortic root model, we performed a comparative analysis of the effectiveness of decellularization approaches based on various combinations of these parameters. The protocols were based on the combinations of treatments in alkaline, ethanol or detergent solutions with scCO2-assisted processing at different modes. Histological analysis demonstrated favorable effects of the preconditioning in a detergent solution. Following processing in scCO2 medium provided a high decellularization degree, reduced cytotoxicity, and increased ultimate tensile strength and Young's modulus of the aortic valve leaflets, while the integrity of the extracellular matrix was preserved.
Assuntos
Valva Aórtica/ultraestrutura , Estruturas Celulares , Engenharia Tecidual/métodos , Animais , Dióxido de Carbono , Células Cultivadas , Módulo de Elasticidade , Matriz Extracelular , Humanos , Células-Tronco Mesenquimais , Ovinos , Resistência à TraçãoRESUMO
The most common cryopreservation protocols of biological tissues suitable for their further implantation has some disadvantages and limited to one sample per procedure with no possible repeated freezing in case of clinical needs. This study is aimed to improve a biological tissues cryopreservation by adding a new heat transfer fluid - polydimethylsiloxane (PDMS). To evaluate its efficiency the porcine biological tissues (heart valves, aortic and trachea fragments) were cryopreserved and thawed in low-viscous PDMS. According to the computer simulation, the midsection cooling rate was up to 490 °C/min and the midsection thawing rate was up to 1140 °C/min with admissible temperature uniformity. Cryoprotectants and liquid nitrogen were not used. The quality of tissue cryopreservation was evaluated using a number of histological and immunohistochemical methods (Orcein, H&E, Anti-CD34, Anti-Vimentin, Anti-Actin staining). Cryopreserved tissues showed no significant morphological difference in comparison with control group both in case of immediate thawing, and after 2 months of low temperature storage. Computer simulation of heat transfer showed the thermal limitations of used approach for larger specimens. The use of PDMS is proposed for preservation of vascular tissue in order to implant it in the form of homotransplants or biobanking with the possible additional use of an internal hydrophilic coating to prevent hydrophobization.
Assuntos
Aorta , Criopreservação/métodos , Crioprotetores/farmacologia , Dimetilpolisiloxanos/farmacologia , Valvas Cardíacas , Preservação de Órgãos/métodos , Traqueia , Animais , Suínos , TemperaturaRESUMO
The vestibular system receives a permanent influence from gravity and reflexively controls equilibrium. If we assume gravity has remained constant during the species' evolution, will its sensory system adapt to abrupt loss of that force? We address this question in the land snail Helix lucorum exposed to 30 days of near weightlessness aboard the Bion-M1 satellite, and studied geotactic behavior of postflight snails, differential gene expressions in statocyst transcriptome, and electrophysiological responses of mechanoreceptors to applied tilts. Each approach revealed plastic changes in the snail's vestibular system assumed in response to spaceflight. Absence of light during the mission also affected statocyst physiology, as revealed by comparison to dark-conditioned control groups. Readaptation to normal tilt responses occurred at ~20 h following return to Earth. Despite the permanence of gravity, the snail responded in a compensatory manner to its loss and readapted once gravity was restored.
RESUMO
PURPOSE: To propose a new approach for the study of corneal biomechanics using the Reichert Ocular Response Analyzer (ORA) database, which is based on changes in velocity retardation in the central cornea at the peak of flattening. METHODS: The ORA applanation curve was analyzed using a mathematical technique, which allowed calculation of the elasticity coefficient (Ke), which is primarily characteristic of the elastic properties of the cornea. Elasticity coefficient values were obtained in patients with presumably different biomechanical properties of the cornea: "normal" cornea (71 eyes, normal group), keratoconus (34 eyes, keratoconus group), LASIK (36 eyes, LASIK group), and glaucoma with elevated and compensated intraocular pressure (lOP) (38 eyes, glaucoma group). RESULTS: The mean Ke value in the normal group was 11.05 +/- 1.6, and the corneal thickness correlation coefficient r2 was 0.48. In the keratoconus group, the mean Ke value was 4.91 +/- 1.87 and the corneal thickness correlation coefficient r2 was 0.47. In the LASIK group, Ke and r2 were 5.99 +/- 1.18 and 0.39, respectively. In the glaucoma group, the same eyes that experienced a two-fold reduction in lOP developed a statistically significant reduction in the Ke (1.06 times lower), whereas their corneal hysteresis value increased 1.25 times. CONCLUSIONS: The elasticity coefficient calculated using the ORA applanation curve can be used in the evaluation of corneal biomechanical properties.