In silico prediction of the enzymes involved in the degradation of the herbicide molinate by Gulosibacter molinativorax ON4T.

Gulosibacter molinativorax ON4T is the only known organism to produce molinate hydrolase (MolA), which catalyses the breakdown of the thiocarbamate herbicide into azepane-1-carboxylic acid (ACA) and ethanethiol. A combined genomic and transcriptomic strategy was used to fully characterize the strain ON4T genome, particularly the molA genetic environment, to identify the potential genes encoding ACA degradation enzymes. Genomic data revealed that molA is the only catabolic gene of a novel composite transposon (Tn6311), located in a novel low copy number plasmid (pARLON1) harbouring a putative T4SS of the class FATA. pARLON1 had an ANI value of 88.2% with contig 18 from Agrococcus casei LMG 22410T draft genome. Such results suggest that pARLON1 is related to genomic elements of other Actinobacteria, although Tn6311 was observed only in strain ON4T. Furthermore, genomic and transcriptomic data demonstrated that the genes involved in ACA degradation are chromosomal. Based on their overexpression when growing in the presence of molinate, the enzymes potentially involved in the heterocyclic ring breakdown were predicted. Among these, the activity of a protein related to caprolactone hydrolase was demonstrated using heterologous expression. However, further studies are needed to confirm the role of the other putative enzymes.

Continuous ozonation of urban wastewater: Removal of antibiotics, antibiotic-resistant Escherichia coli and antibiotic resistance genes and phytotoxicity.

This work evaluated the removal of a mixture of eight antibiotics (i.e. ampicillin (AMP), azithromycin (AZM), erythromycin (ERY), clarithromycin (CLA), ofloxacin (OFL), sulfamethoxazole (SMX), trimethoprim (TMP) and tetracycline (TC)) from urban wastewater, by ozonation operated in continuous mode at different hydraulic retention times (HRTs) (i.e. 10, 20, 40 and 60 min) and specific ozone doses (i.e. 0.125, 0.25, 0.50 and 0.75 gO3 gDOC- 1). As expected, the efficiency of ozonation was highly ozone dose- and contact time-dependent. The removal of the parent compounds of the selected antibiotics to levels below their detection limits was achieved with HRT of 40 min and specific ozone dose of 0.125 gO3 gDOC- 1. The effect of ozonation was also investigated at a microbiological and genomic level, by studying the efficiency of the process with respect to the inactivation of Escherichia coli and antibiotic-resistant E. coli, as well as to the reduction of the abundance of selected antibiotic resistance genes (ARGs). The inactivation of total cultivable E. coli was achieved under the experimental conditions of HRT 40 min and 0.25 gO3 gDOC-1, at which all antibiotic compounds were already degraded. The regrowth examinations revealed that higher ozone concentrations were required for the permanent inactivation of E. coli below the Limit of Quantification (

Impact of biogenic substrates on sulfamethoxazole biodegradation kinetics by Achromobacter denitrificans strain PR1.

Pure cultures have been found to degrade pharmaceutical compounds. However, these cultures are rarely characterized kinetically at environmentally relevant concentrations. This study investigated the kinetics of sulfamethoxazole (SMX) degradation by Achromobacter denitrificans strain PR1 at a wide range of concentrations, from ng/L to mg/L, to assess the feasibility of using it for bioaugmentation purposes. Complete removal of SMX occurred for all concentrations tested, i.e., 150 mg/L, 500 µg/L, 20 µg/L, and 600 ng/L. The reaction rate coefficients (kbio) for the strain at the ng/L SMX range were: 63.4 ± 8.6, 570.1 ± 15.1 and 414.9 ± 124.2 L/g[Formula: see text]·day), for tests fed without a supplemental carbon source, with acetate, and with succinate, respectively. These results were significantly higher than the value reported for non-augmented activated sludge (0.41 L/(g [Formula: see text]·day) with hundreds of ng/L of SMX. The simultaneous consumption of an additional carbon source and SMX suggested that the energetic efficiency of the cells, boosted by the presence of biogenic substrates, was important in increasing the SMX degradation rate. The accumulation of 3-amino-5-methylisoxazole was observed as the only metabolite, which was found to be non-toxic. SMX inhibited the Vibrio fischeri luminescence after 5 min of contact, with EC50 values of about 53 mg/L. However, this study suggested that the strain PR1 still can degrade SMX up to 150 mg/L. The results of this work demonstrated that SMX degradation kinetics by A. denitrificans PR1 compares favorably with activated sludge and the strain is a potentially interesting organism for bioaugmentation for SMX removal from polluted waters.

Anti-sessile bacterial and cytocompatibility properties of CHX-loaded nanohydroxyapatite.

Nanohydroxyapatite possesses exceptional biocompatibility and bioactivity regarding bone cells and tissues, justifying its use as a coating material or as a bone substitute. Unfortunately, this feature may also encourage bacterial adhesion and biofilm formation. Surface functionalization with antimicrobials is a promising strategy to reduce the likelihood of bacterial infestation and colonization on medical devices. Chlorhexidine digluconate is a common and effective antimicrobial agent used for a wide range of medical applications. The purpose of this work was the development of a nanoHA biomaterial loaded with CHX to prevent surface bacterial accumulation and, simultaneously, with good cytocompatibility, for application in the medical field. CHX (5-1500 mg/L) was loaded onto nanoHA discs and the materials were evaluated for CHX adsorption and release profile, physic-chemical features, antibacterial activity against Escherichia coli, Staphylococcus aureus and Staphylococcus epidermidis, and cytocompatibility toward L929 fibroblasts. Results showed that the adsorption of CHX on nanoHA surface occurred by electrostatic interactions between the cationic group of CHX and the phosphate group of nanoHA. The release of CHX from CHX-loaded nanoHA showed a fast initial rate followed by a slower kinetics release, due to constraints caused by dilution and diffusion-limiting processes. NanoHA.50 to nanoHA.1500 showed strong anti-sessile activity, inhibiting bacterial adhesion and the biofilm formation. CHX-nanoHA caused a dose- and time-dependent inhibitory effect on the proliferation of fibroblasts for nanoHA.100 to nanoHA.1500. Cellular behavior on nanoHA.5 and nanoHA.50 was similar to control. Therefore, CHX-loaded nanoHA surfaces appear as a promising alternative to prevention of devices-related infections.

Influence of nanohydroxyapatite surface properties on Staphylococcus epidermidis biofilm formation.

Nanohydroxyapatite (nanoHA), due to its chemical properties, has appeared as an exceptionally promising bioceramic to be used as bone regeneration material. Staphylococcus epidermidis have emerged as major nosocomial pathogens associated with infections of implanted medical devices. In this work, the purpose was to study the influence of the nanoHA surface characteristics on S. epidermidis RP62A biofilm formation. Therefore, two different initial inoculum concentrations (Ci) were used in order to check if these would affect the biofilm formed on the nanoHA surfaces. Biofilm formation was followed by the enumeration of cultivable cells and by scanning electron microscopy. Surface topography, contact angle, total surface area and porosimetry of the biomaterials were studied and correlated with the biofilm data. The surface of nanoHA sintered at 830 (nanoHA830) showed to be more resistant to S. epidermidis attachment and accumulation than that of nanoHA sintered at 1000 (nanoHA1000). The biofilm formed on nanoHA830 presented differences in terms of structure, surface coverage and EPS production when compared to the one formed on nanoHA1000 surface. It was observed that topography and surface area of nanoHA surfaces had influence on the bacterial attachment and accumulation. Ci influenced bacteria attachment and accumulation on nanoHA surfaces over time. The choice of the initial inoculum concentration was relevant proving to have an effect on the extent of adherence thus being a critical point for human health if these materials are used in implantable devices. This study showed that the initial inoculum concentration and surface material properties determine the rate of microbial attachment to substrata and consequently are related to biofilm-associated infections in biomaterials.

Biological treatment of propanil and 3,4-dichloroaniline: kinetic and microbiological characterisation.

Propanil (3,4-dichloropropionanilide) is a widely used herbicide, applied worldwide in rice paddies. Propanil is primarily transformed in nature to 3,4-dichloroaniline (DCA), which is more slowly biodegradable. Both compounds have adverse health and ecotoxicity effects. This work investigated the microbial ecology and kinetics of propanil-degrading enrichments obtained from soil in a sequencing batch reactor (SBR) operated with different feeding strategies, aiming at the enhanced biological removal of propanil and DCA from contaminated waters. During SBR operation with a dump feeding strategy, a high propanil concentration led to DCA accumulation, which was only fully degraded after 5 days, likely due to DCA inhibition. For this reason, the operational mode was changed to fed-batch operation with lower initial propanil concentrations, which resulted in faster propanil and DCA biodegradation. Thus a fed-batch operation seems more appropriate for the acclimatisation of an effective propanil- and DCA-degrading population. The changes in performance were accompanied by a shift in the microbial population structure, as determined by DGGE of the 16S rRNA gene, particularly after a feed of DCA as the sole carbon source. Isolates obtained from the acclimatised population included members of the genera Enterococcus and Rhodococcus, as well as Brevundimonas, which displayed >90% propanil biodegradation efficiency.

Unsteady state flow and stagnation in distribution systems affect the biological stability of drinking water.

The effects of water stagnation and flushing on the biological stability of drinking water were studied by promoting the formation of biofilms under continuous flow (turbulent or laminar) and subsequently subjecting them to unsteady hydraulic situations. Independently of the flow regime under which the biofilm was formed, stagnation promoted bacterial accumulation, either in attached or suspended form, which were carried away in higher numbers when flow was re-started, thereby compromising its biological quality. In all cases, Betaproteobacteria was the dominant phylogenetic group, although Gamma and Alpha subclasses were also present. These results suggest that special attention should be given to the biological quality of drinking water where consumption is subjected to strongly variable demands such as in seasonal hotels, week-end houses or dental clinics after week-ends as abnormal changes may have occurred in the microbiological parameters. Moreover, this study showed that the cultivable bacterial numbers are not related to those of total bacteria and, thus, should not be the basis for the routine tests of bacteriological control in these systems.

Biofouling control using microparticles carrying a biocide.

This study presents a new technological approach to minimize the use of antimicrobial (AMB) agents and their deleterious effects, based on the principle of drug-delivery systems whereby the AMB chemicals are transported on microparticles. The efficacy of microparticles carrying the quaternary ammonium compound (QAC), benzyldimethyldodecyl ammonium chloride (BDMDAC), was assessed against Pseudomonas fluorescens in both the planktonic and the biofilm state. The microparticles were prepared using a layer-by-layer (LBL) self-assembly technique. Oppositely charged molecules of polyethyleneimine (PEI), sodium polystyrene sulfonate (PSS), and BDMDAC were assembled on polystyrene (PS) cores. BDMDAC-coated particles were observed by CryoSEM and their composition analyzed by X-ray microanalysis. Zeta potential measurements indicated that changes in surface charge were compatible with a BDMDAC/particle interaction. This biocidal carrier structure had significant stability, verified by the release of only 15% of the BDMDAC when immersed in water for 18 months. Biocidal carrier activity was evaluated by determining the survival ratio of P. fluorescens planktonic and biofilm cells after different exposure periods to BDMDAC-coated particles. Tests with biofilm cells were also performed with the free QAC. An efficient AMB effect (minimum bactericidal concentration) against suspended cells was found for a concentration of 9.2 mg l(-1) of BDMDAC on coated particles after incubation for 30 min and 6.5 mg l(-1) of BDMDAC on coated particles after 60 min. Exposure of biofilms to PS-PEI/PSS/BDMDAC (0.87 mg l(-1)) resulted in a decrease in viability of 60.5% and 66.5% of the total biofilm population for 30 and 60 min exposure times, respectively. Exposure for 60 min to 6.33 mg l(-1) and 11.75 mg l(-1) of BDMDAC in PS-PEI/PSS/BDMDAC particles promoted inactivation of 80.6% and 87.2% of the total population, respectively. The AMB effects obtained with the application of free BDMDAC were statistically similar to those promoted by the application of BDMDAC coated particles. The overall results indicate that this novel AMB strategy has potential for the control of microbial growth of planktonic cells and biofouling. Moreover, the technique allows the reuse of AMB molecules and consequently reduces the environmental risks associated with excessive use of AMB agents, thereby providing real benefits to public health.

Dynamics of drinking water biofilm in flow/non-flow conditions.

Drinking water biofilm formation on polyvinyl chloride (PVC), cross-linked polyethylene (PEX), high density polyethylene (HDPE) and polypropylene (PP) was followed in three different reactors operating under stagnant or continuous flow regimes. After one week, a quasi-steady state was achieved where biofilm total cell numbers per unit surface area were not affected by fluctuations in the concentration of suspended cells. Metabolically active cells in biofilms were around 17-35% of the total cells and 6-18% were able to form colony units in R(2)A medium. Microbiological analysis showed that the adhesion material and reactor design did not affect significantly the biofilm growth. However, operating under continuous flow (0.8-1.9 Pa) or stagnant water had a significant effect on biofilm formation: in stagnant waters, biofilm grew to a less extent. By applying mass balances and an asymptotic biofilm formation model to data from biofilms grown on PVC and HDPE surfaces under turbulent flow, specific growth rates of bacteria in the biofilm were found to be similar for both materials (around 0.15 day(-1)) and much lower than the specific growth rates of suspended bacteria (around 1.8 day(-1)).

Square-wave voltametric method for determination of molinate concentration in a biological process using a hanging mercury drop electrode.

A square-wave voltammetric (SWV) method using a hanging mercury drop electrode (HMDE) has been developed for determination of the herbicide molinate in a biodegradation process. The method is based on controlled adsorptive accumulation of molinate for 10 s at a potential of -0.8 V versus AgCl/Ag. An anodic peak, due to oxidation of the adsorbed pesticide, was observed in the cyclic voltammogram at ca. -0.320 V versus AgCl/Ag; a very small cathodic peak was also detected. The SWV calibration plot was established to be linear in the range 5.0 x 10(-6) to 9.0 x 10(-6) mol L(-1); this corresponded to a detection limit of 3.5 x 10(-8) mol L(-1). This electroanalytical method was used to monitor the decrease of molinate concentration in river waters along a biodegradation process using a bacterial mixed culture. The results achieved with this voltammetric method were compared with those obtained by use of a chromatographic method (HPLC-UV) and no significant statistical differences were observed.

Compatible Solutes in the Thermophilic Bacteria Rhodothermus marinus and "Thermus thermophilus".

(sup13)C nuclear magnetic resonance spectroscopy and (sup1)H nuclear magnetic resonance spectroscopy were used to identify and quantify the organic solutes of several strains of halophilic or halotolerant thermophilic bacteria. Two strains of Rhodothermus marinus and four strains of "Thermus thermophilus" grown in complex medium containing NaCl were examined. 2-O-Mannosylglycerate was a major compatible solute in all strains: the Thermus strains accumulated the (beta)-anomer only, whereas both anomers were found in R. marinus. 2-O-(beta)-mannosylglycerate and 2-O-(alpha)-mannosylglycerate were the major compatible solutes in R. marinus. The former was the predominant solute in cells grown in 2.0 and 4.0% NaCl-containing medium, while the latter was the predominant compatible solute at higher salinities. Glutamate, trehalose, and glucose were also present as minor components. The intracellular K(sup+) concentration, as determined by (sup39)K nuclear magnetic resonance spectroscopy, in R. marinus increased with salinity and was sufficient to balance the negative charges of the mannosylglycerate. In addition to 2-O-(beta)-mannosylglycerate, trehalose was a major compatible solute of "T. thermophilus." 2-O-(beta)-Mannosylglycerate was the main solute in medium containing 1.0 or 2.0% NaCl, while trehalose predominated in cells grown in medium supplemented with 3.0 or 4.0% NaCl. Glycine betaine, in lower concentrations, was also detected in two "T. thermophilus" strains. This is the first report of mannosylglycerate as a compatible solute in bacteria.

A membrane-bound HIPIP type center in the thermohalophile Rhodothermus marinus.

A HIPIP-type center was discovered in intact membranes of the thermohalophilic aerobe Rhodothermus marinus. In both the membrane-bound state and after detergent solubilization and partial purification, this center exhibits an almost axial EPR spectrum, with g-values at 2.13 and 2.03, similar to those of soluble HIPIP proteins isolated from purple bacteria. It has a high reduction potential, of 260 mV at pH 7.5. Rhodothermus HIPIP is involved in the main membrane-bound electron-transfer pathway, being reduced by NADH or succinate only in the presence of cyanide. The possible physiological function of this novel HIPIP-type center is discussed.

Heterotrophic plate counts and the isolation of bacteria from mineral waters on selective and enrichment media.

The heterotrophic plate counts of 15 brands of bottled non-carbonated mineral waters were examined and found to be generally high and variable. Four selective or enrichment media for the enumeration of coliforms (m-Endo LES and m-lauryl sulphate agar) and Pseudomonas aeruginosa (cetrimide-nalidixic acid agar and malachite green broth) were used to isolate several species of Gram-negative bacteria. Strains identified as CDC gr IVc-2 and Comamonas (Ps.) acidovorans were the two most commonly isolated. Considerable variation in populations was seen between the brands, as well as between two batches of the same mineral water.