Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 12 de 12
Filtrar
1.
J Appl Oral Sci ; 32: e20230278, 2024.
Artigo em Inglês | MEDLINE | ID: mdl-38537028

RESUMO

OBJECTIVE: The present in vitro study incorporated niobium oxyhydroxide fillers into an experimental high-viscosity bulk-fill resin composite to improve its mechanical performance and provide it a bioactive potential. METHODOLOGY: Scanning electron microscopy synthesized and characterized 0.5% niobium oxyhydroxide fillers, demonstrating a homogeneous morphology that represented a reinforcement for the feature. Fillers were weighed, gradually added to the experimental resin composite, and homogenized for one minute, forming three groups: BF (experimental high-viscosity bulk-fill resin composite; control), BF0.5 (experimental high-viscosity bulk-fill resin composite modified with 0.5% niobium oxyhydroxide fillers), and BFC (commercial bulk-fill resin composite Beautifil Bulk U, Shofu; positive control). In total, 10 specimens/groups (8 × 2 × 2 mm) underwent flexural strength (FS) tests in a universal testing machine (Instron) (500N). Resin composites were also assessed for Knoop hardness (KH), depth of cure (DoC), degree of conversion (DC), elastic modulus (E), and degree of color change (ΔE). The bioactive potential of the developed resin composite was evaluated after immersing the specimens into a simulated body fluid in vitro solution and assessing them using a Fourier-transformed infrared spectroscope with an attenuated total reflectance accessory. One-way ANOVA, followed by the Tukey's test (p<0.05), determined FS, DC, KH, and ΔE. For DoC, ANOVA was performed, which demonstrated no significant difference between groups (p<0.05). CONCLUSIONS: The high-viscosity bulk-fill resin composite with 0.5% niobium oxyhydroxide fillers showed promising outcomes as reinforcement agents and performed well for bioactive potential, although less predictable than the commercial resin composite with Giomer technology.


Assuntos
Resinas Compostas , Nióbio , Viscosidade , Teste de Materiais , Polimerização , Materiais Dentários
2.
J. appl. oral sci ; J. appl. oral sci;32: e20230278, 2024. tab, graf
Artigo em Inglês | LILACS-Express | LILACS | ID: biblio-1550476

RESUMO

Abstract Objective The present in vitro study incorporated niobium oxyhydroxide fillers into an experimental high-viscosity bulk-fill resin composite to improve its mechanical performance and provide it a bioactive potential. Methodology Scanning electron microscopy synthesized and characterized 0.5% niobium oxyhydroxide fillers, demonstrating a homogeneous morphology that represented a reinforcement for the feature. Fillers were weighed, gradually added to the experimental resin composite, and homogenized for one minute, forming three groups: BF (experimental high-viscosity bulk-fill resin composite; control), BF0.5 (experimental high-viscosity bulk-fill resin composite modified with 0.5% niobium oxyhydroxide fillers), and BFC (commercial bulk-fill resin composite Beautifil Bulk U, Shofu; positive control). In total, 10 specimens/groups (8 × 2 × 2 mm) underwent flexural strength (FS) tests in a universal testing machine (Instron) (500N). Resin composites were also assessed for Knoop hardness (KH), depth of cure (DoC), degree of conversion (DC), elastic modulus (E), and degree of color change (ΔE). The bioactive potential of the developed resin composite was evaluated after immersing the specimens into a simulated body fluid in vitro solution and assessing them using a Fourier-transformed infrared spectroscope with an attenuated total reflectance accessory. One-way ANOVA, followed by the Tukey's test (p<0.05), determined FS, DC, KH, and ΔE. For DoC, ANOVA was performed, which demonstrated no significant difference between groups (p<0.05). Conclusions The high-viscosity bulk-fill resin composite with 0.5% niobium oxyhydroxide fillers showed promising outcomes as reinforcement agents and performed well for bioactive potential, although less predictable than the commercial resin composite with Giomer technology.

3.
Braz. dent. sci ; 27(2): 1-8, 2024. ilus, tab
Artigo em Inglês | LILACS, BBO - odontologia (Brasil) | ID: biblio-1563111

RESUMO

Objective: Evaluate a fluoride varnish modified by nanostructures with the bioactive qualities of silica (SiO2) and niobium pentoxide (Nb2O5), testing its remineralizing potential by surface hardness (SH) and energy-dispersive X-ray spectroscopy (EDX). Material and Methods: Bovine enamel specimens (6×4×2mm) were prepared and submitted to a demineralizing/remineralizing process to produce a subsurface caries-like lesion, evaluated by transversal microradiography image (TMR) and subsequently distributed randomly into three groups: fluoride varnish (VZ); fluoride varnish + silica gelatin (VZ-SiO2) and fluoride varnish + niobium nanoparticles (VZ-Nb2O5). The specimens were subjected to a pH-cycling demineralizing/remineralizing process for 7 days at 37ºC. The %SH loss and %SH recovery (after the pH-cycling regimen) were calculated (n=10/group). The Ca/P weight ratio before and after the pH-cycling regimen was evaluated through SEM/EDX. A two-way ANOVA followed by Tukey's test (p<0.05) was performed for hardness and EDX. Results: TMR image showed the formation of an artificial subsurface lesion, and a significant SH increase was observed in the VZ-Nb2O5 group (p<0.05). Regarding the %SHL and %SHR, the VZ-Nb2O5 and VZ-SiO2 were significantly different compared to the VZ group (p<0.001), but VZ-Nb2O5 presented higher values. The Ca/P ratio showed that blocks treated with VZ-SiO2 and VZ-Nb2O5 showed greater ion deposition, particularly in the presence of Nb. Conclusion: The bioactivity of niobium facilitated greater interaction between the enamel and the varnish, leading to a slow release of nanoparticles and a longer-lasting remineralizing effect (AU)


Objetivo: Avaliar um verniz fluoretado modificado por nanoestruturas com a bioatividade da sílica (SiO2) e pentóxido de nióbio (Nb2O5), testando seu potencial remineralizador pela dureza de superfície (SH) e espectroscopia de energia dispersiva de raios-X (EDX). Material e Métodos: Espécimes de esmalte bovino (6×4×2mm) foram preparados e submetidos à desmineralização/remineralização para produzir uma lesão subsuperficial semelhante a cárie, avaliada por imagem de microrradiografia transversal (TMR) sendo distribuída em três grupos: verniz fluoretado (VZ); verniz fluoretado+gelatina de sílica (VZ-SiO2) e verniz fluoretado+nanopartículas de nióbio (VZ-Nb2O5). As amostras foram submetidas à desmineralização/remineralização por ciclagem de pH durante 7 dias a 37°C. A porcentagem de perda e recuperação de SH foram calculadas (n=10/grupo). A relação em peso Ca/P antes e depois da ciclagem foi avaliada através de MEV/EDX. ANOVA a dois critérios seguida do teste de Tukey (p<0,05) foi realizada para dureza e EDX. Resultados: A TMR mostrou a formação de uma lesão subsuperficial e um aumento significativo de SH foi observado no grupo VZ-Nb2O5 (p<0,05). Em relação ao %SHL e %SHR, o VZ-Nb2O5 e o VZ-SiO2 foram significativamente diferentes em relação ao grupo VZ (p<0,001), mas o VZ-Nb2O5 apresentou valores maiores. A relação Ca/P mostrou que os blocos tratados com VZ-SiO2 e VZ-Nb2O5 apresentaram maior deposição de íons, principalmente na presença de Nb. Conclusão: A bioatividade do nióbio facilitou maior interação entre o esmalte e o verniz, levando a uma liberação lenta de nanopartículas e a um efeito remineralizante mais duradouro (AU)


Assuntos
Remineralização Dentária , Dentística Operatória , Nanoestruturas , Fluoretos , Nióbio
4.
Braz Dent J ; 34(4): 127-134, 2023.
Artigo em Inglês | MEDLINE | ID: mdl-37909635

RESUMO

This in vitro study synthesized hybrid nanofibers embedded in graphene oxide (GO) and incorporated them into experimental resin composite monomers to evaluate their physical-mechanical properties. Inorganic-organic hybrid nanofibers were produced with precursor solutions of 1% wt. GO-filled Poly (d,l-lactide, PLA) fibers and scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) characterized the morphology and chemical composition of the spun fibers. Resin composite monomers were developed and a total of 5% nanofibers were incorporated into the experimental materials. Three groups were developed: G1 (control resin monomers), G2 (resin monomers/PLA nanofibers), and G3 (resin monomers/inorganic-organic hybrid nanofibers). Contact angle (n=3), flexural strength (n=22), elastic modulus (n=22), and Knoop hardness (n=6) were evaluated. The mean of the three indentations was obtained for each sample. The normality of data was assessed by QQ Plot with simulated envelopes and analyzed by Welch's method (p<0.05). Overall, SEM images showed the regular shape of nanofibers but were non-aligned. Compositional analysis from EDS (n=6) revealed the presence of carbon and oxygen (present in GO composition) and Si from the functionalization process. The results of contact angle (°) and hardness (Kg/mm2) for each group were as follow, respectively: G1 (59.65±2.90; 37.48±1.86a), G2 (67.99±3.93; 50.56±1.03b) and G3 (62.52±7.40; 67.83±1.01c). The group G3 showed the highest Knoop hardness values (67.83 kg/mm2), and the flexural strength of all groups was adversely affected. The experimental resin composite composed of hybrid nanofibers with GO presented increased hardness values and hydrophilic behavior.


Assuntos
Grafite , Nanofibras , Nanofibras/química , Resinas Compostas/química , Poliésteres/química , Teste de Materiais , Propriedades de Superfície
5.
Gen Dent ; 71(5): 53-57, 2023.
Artigo em Inglês | MEDLINE | ID: mdl-37595084

RESUMO

Determining the appropriate technique for diastema closure is challenging, and the decision must be evidence based. The objective of these case reports is to describe different approaches to diastema closure using direct and indirect techniques, focusing on the characteristics of the patient and clinical requirements to guide treatment. In the first case, a 16-year-old patient had multiple diastemas in the maxillary anterior dentition. The clinical evaluation revealed microdontia of the lateral incisors and malpositioned teeth. The treatment included tooth whitening and placement of composite resin veneers using a direct technique. In the second case, a 54-year-old patient displayed a disharmonious and esthetically compromised smile due to small teeth, color changes, multiple diastemas, incisal wear, and severe dentogingival disproportion. Based on the patient's expectations, the patient's age, and the presence of a "black triangle" interdental space, a multidisciplinary restorative treatment was proposed, including gingivoplasty, tooth whitening, and placement of ceramic laminate veneers using an indirect technique. Both approaches achieved successful esthetic rehabilitation and diastema closure with minimal intervention. The choice of procedure and restorative material, as well as the need for tooth preparation, varied based on the clinical requirements, patient expectations, and financial constraints. Careful treatment planning avoided lengthy and inefficient procedures.


Assuntos
Diastema , Má Oclusão , Humanos , Adolescente , Pessoa de Meia-Idade , Diastema/terapia , Estética Dentária , Facetas Dentárias , Cerâmica , Resinas Compostas/uso terapêutico
6.
Braz. dent. j ; Braz. dent. j;34(4): 127-134, July-Aug. 2023. tab, graf
Artigo em Inglês | LILACS-Express | LILACS, BBO - odontologia (Brasil) | ID: biblio-1520330

RESUMO

Abstract This in vitro study synthesized hybrid nanofibers embedded in graphene oxide (GO) and incorporated them into experimental resin composite monomers to evaluate their physical-mechanical properties. Inorganic-organic hybrid nanofibers were produced with precursor solutions of 1% wt. GO-filled Poly (d,l-lactide, PLA) fibers and scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) characterized the morphology and chemical composition of the spun fibers. Resin composite monomers were developed and a total of 5% nanofibers were incorporated into the experimental materials. Three groups were developed: G1 (control resin monomers), G2 (resin monomers/PLA nanofibers), and G3 (resin monomers/inorganic-organic hybrid nanofibers). Contact angle (n=3), flexural strength (n=22), elastic modulus (n=22), and Knoop hardness (n=6) were evaluated. The mean of the three indentations was obtained for each sample. The normality of data was assessed by QQ Plot with simulated envelopes and analyzed by Welch's method (p<0.05). Overall, SEM images showed the regular shape of nanofibers but were non-aligned. Compositional analysis from EDS (n=6) revealed the presence of carbon and oxygen (present in GO composition) and Si from the functionalization process. The results of contact angle (°) and hardness (Kg/mm2) for each group were as follow, respectively: G1 (59.65±2.90; 37.48±1.86a), G2 (67.99±3.93; 50.56±1.03b) and G3 (62.52±7.40; 67.83±1.01c). The group G3 showed the highest Knoop hardness values (67.83 kg/mm2), and the flexural strength of all groups was adversely affected. The experimental resin composite composed of hybrid nanofibers with GO presented increased hardness values and hydrophilic behavior.


Resumo Este estudo in vitro sintetizou nanofibras híbridas embebidas em óxido de grafeno (GO), incorporando-as à uma resina composta experimental de monômeros para avaliar suas propriedades físico-mecânicas. Nanofibras híbridas inorgânica-orgânicas foram produzidas com soluções precursoras de fibras poli (d, l-lactídeo, PLA) preenchidas com GO a 1% em peso e microscopia eletrônica de varredura (MEV) e espectroscopia de raio-X de energia dispersiva (EDS) caracterizaram a morfologia e composição química das fibras. Monômeros de resina composta foram desenvolvidos e um total de 5% de nanofibras foi incorporado aos materiais experimentais. Três grupos foram desenvolvidos: G1 (monômeros de resina controle), G2 (monômeros de resina/ nanofibras de PLA) e G3 (monômeros de resina/nanofibras híbridas inorgânico-orgânicas). Ângulo de contato (n=3), resistência à flexão (n=22), módulo de elasticidade (n=22) e dureza Knoop (n=6) foram avaliados. A média das três endentações foi obtida para cada amostra. A normalidade dos dados foi avaliada pelo QQ Plot com envelopes simulados e analisada pelo método de Welch (p<0,05). No geral, as imagens de MEV mostraram forma regular de nanofibras, mas não alinhadas. A análise composicional de EDS (n=6) revelou a presença de carbono e oxigênio (presentes na composição do GO) e Si resultante do processo de funcionalização. Os resultados do ângulo de contato (°) e dureza (Kg/mm2) para cada grupo foram os seguintes, respectivamente: G1 (59,65±2,90; 37,48±1,86a), G2 (67,99±3,93; 50,56±1,03b) e G3 (62,52±7,40; 67,83±1,01c). G3 apresentou os maiores valores de dureza Knoop (67,83 kg/mm2), e a resistência à flexão de todos os grupos foi prejudicada. A resina composta experimental composta por nanofibras híbridas com GO apresentou maiores valores de dureza e comportamento hidrofílico.

7.
Medicina (Kaunas) ; 59(5)2023 Apr 28.
Artigo em Inglês | MEDLINE | ID: mdl-37241081

RESUMO

Objective: The objective of this study is to present a case report in which the injectable composite resin technique was used as a restorative alternative for dental re-anatomization in a patient with cleft lip and palate and aesthetic complaints. Materials and Methods: The treatment plan included the re-anatomization of the maxillary premolars and canines using a flowable composite resin. This resin was injected and cured through a transparent matrix, which was a copy of the diagnostic wax-up model. Some parameters such as application time and marginal adaptation were also observed when performing the restorations. Additionally, old composite resin restorations on the upper lateral incisors were replaced using the incremental technique with conventional resins, which helped to assess color stability and fracture/wear deterioration for both restorative techniques. Results: The clinical case report shows that the injectable technique was a simple and quick method for restoring the anatomy of teeth (shape and contour) in one session, since the injectable resin can be easily applied in interproximal areas without the need to manually sculpt the resin. In this case, no clinical, visual, or photographic differences were found in marginal discoloration, color stability, and fracture/wear deterioration for the two restorative techniques after one year of follow-up. Conclusions: The professional may have another clinical option for restorative treatment in the case of small re-anatomizations. In addition, the injectable technique seems to require less operator skill and chair time and better marginal adaptation in cases of small anatomical changes.


Assuntos
Fenda Labial , Fissura Palatina , Humanos , Fenda Labial/cirurgia , Fissura Palatina/cirurgia , Resinas Compostas/uso terapêutico , Incisivo
8.
J Esthet Restor Dent ; 35(3): 442-448, 2023 04.
Artigo em Inglês | MEDLINE | ID: mdl-36161755

RESUMO

OBJECTIVE: This case report described the use of a stamping technique associated with a bulk fill composite to restore an ICDAS 4 carious lesion on a posterior tooth. The 4-year follow-up is also presented. CLINICAL CONSIDERATIONS: A 32-year-old patient presented a carious lesion on tooth 36 with an underlying dark shadow at the dentin seen from the noncavitated enamel occlusal surface, which was compatible with an ICDAS 4 carious lesion. The lesion was radiographically detected and the caries disease was treated with dietary and hygiene habits orientations. Before accessing the lesion and selectively removing the carious tissue, an occlusal stamp was made by applying a flowable resin composite to copy the anatomy of the noncavitated enamel surface. The cavity was restored using a bulk fill resin composite (Opus Bulk Fill, FGM) with 4-mm-thick increments. Before curing the last increment, a Teflon band was adapted at the uncured bulk fill composite surface and the occlusal stamp made with the flowable composite was pressed against it to reproduce the natural characteristics and initial occlusal anatomy. The top surface was light-activated for 40 s. After 4 years, small wear could be seen in the restoration, but still within clinically acceptable levels. CONCLUSION: The occlusal stamp technique allows reproduction of the natural anatomy of teeth affected by ICDAS 4 carious lesions with good clinical longevity over 4 years. CLINICAL SIGNIFICANCE: This case report presents the use of the stamp technique to restore a tooth affected by an ICDAS 4 lesion, in which a carious process reached the dentin and the enamel anatomy was still preserved. The bulk fill resin composite associated with the occlusal stamp was chosen to quickly restore the cavity with clinical predictability. Bulk fill composites allow the insertion of up to 4-mm-thick increments and offer lower shrinkage stress, good clinical longevity and a less time-consuming procedure in cases of posterior teeth, especially if associated with the stamp technique.


Assuntos
Cárie Dentária , Humanos , Adulto , Seguimentos , Cárie Dentária/terapia , Esmalte Dentário , Resinas Compostas , Restauração Dentária Permanente
9.
Rev. Odontol. Araçatuba (Impr.) ; 43(2): 16-20, maio-ago. 2022.
Artigo em Português | LILACS, BBO - odontologia (Brasil) | ID: biblio-1361986

RESUMO

O presente trabalho tem como objetivo realizar uma revisão de literatura e discutir os mais atuais conceitos sobre abordagem conservadora de lesões cariosas profundas, facilitando o manejo clínico. Para que essa abordagem conservadora seja implementada, é imprescindível que se conheça a composição estrutural e funcional do biofilme para, assim, entender a evolução da doença cárie que acomete a estrutura dentária. No entanto, quando se trata de um dente com lesão de cárie ativa com grande comprometimento de esmalte e dentina, procedimentos operatórios mais invasivos e restauradores podem ser necessários, mesmo que fundamentados na maior preservação possível de estrutura dentária. As evidências mais atuais encontradas na literatura recomendam a remoção seletiva do tecido cariado que consiste na dentina infectada, ou seja, clinicamente amolecida, e restauração definitiva na mesma sessão. Portanto, desde que o dente apresente vitalidade pulpar clinicamente confirmada, acredita-se que a preservação estratégica da dentina, poderá aumentar as chances de sucesso no tratamento, evitando possível exposição da polpa dentária. Adicionalmente, ao optar por práticas conservadoras no contexto da Odontologia de mínima intervenção, resultará em um significativo aumento na longevidade das restaurações sempre associando promoção de saúde ao paciente(AU)


This paper aims to conduct a literature review and discuss the most current concepts on conservative approach to deep carious lesions in permanent posterior teeth, facilitating clinical management. For this conservative approach to be implemented, it is essential to know the structural and functional composition of the biofilm in order to understand the evolution of the caries disease that affects the dental structure. However, when it comes to a tooth with an active caries lesion with major enamel and dentin compromise, more invasive and restorative surgical procedures may be necessary, even if based on the greatest possible preservation of the dental structure. The most current findings in the literature recommend the selective removal of carious tissue consisting of infected dentin, that is, clinically softened, and definitive restoration in the same session. Therefore, as long as the tooth has clinically confirmed pulp vitality, it is believed that the strategic preservation of dentin may increase the chances of successful treatment, avoiding possible exposure of the dental pulp. Additionally, when opting for conservative practices in the context of Minimally Invasive Dentistry, it will result in a significant increase in the longevity of restorations, always associating health promotion to the patient(AU)


Assuntos
Cárie Dentária , Cárie Dentária/terapia , Esmalte Dentário , Placa Dentária , Restauração Dentária Permanente , Dentina
10.
Sci Rep ; 12(1): 10259, 2022 06 17.
Artigo em Inglês | MEDLINE | ID: mdl-35715426

RESUMO

This in vitro study synthetized hybrid composite nanoparticles of graphene oxide (GO) and montmorillonite MMt (GO-MMt) by ultrasound treatments. Samples were characterized by X-ray diffraction, FT-Raman, FTIR, TEM and SEM. The effect of their incorporation (0.3% and 0.5%) on the mechanical properties in a resin-based composite (RBC) and their bioactivity potential were evaluated. The specimens were characterized by evaluating their 3-point flexural strength (n = 6), modulus of elasticity (n = 6), degree of conversion (n = 6), microhardness (n = 6), contact angle (n = 3) and SEM analysis (n = 3). In vitro test in SBF were conducted in the RBCs modified by the hybrid. Overall, the synthetized hybrid composite demonstrated that GO was intercalated with MMt, showing a more stable compound. ANOVA and Tukey test showed that RBC + 0.3% GO-MMt demonstrated superior values of flexural strength, followed by RBC + 0.5% GO-MMt (p < 0.05) and both materials showed higher values of microhardness. All groups presented a contact angle below 90°, characterizing hydrophilic materials. RBCs modified by the hybrid showed Ca and P deposition after 14 days in SBF. In conclusion, RBCs composed by the hybrid showed promising results in terms of mechanical properties and bioactive potential, extending the application of GO in dental materials.


Assuntos
Bentonita , Grafite , Resinas Compostas , Grafite/farmacologia , Teste de Materiais , Propriedades de Superfície
11.
J Mech Behav Biomed Mater ; 126: 105067, 2022 02.
Artigo em Inglês | MEDLINE | ID: mdl-35026564

RESUMO

This in vitro study aimed to evaluate the overall mechanical properties of resin infiltrants doped with bioactive nanofibers and their ability in inhibiting enamel demineralization or achieving remineralization of the adjacent enamel to white spots. A commercial resin infiltrant (ICON, DMG) was doped with hybrid inorganic-organic nanofibers and analyzed for degree of conversion (DC, n = 3) and surface hardness (SH, n = 6). Subsequently, enamel specimens (6 × 4 × 2 mm3) were prepared and submitted to a demineralizing/remineralizing process to produce a subsurface caries-like lesion. The specimens were treated with one of the following materials: ICON infiltrant, DMG (control); ICON + nanofibers of poly-lactic acid (PLA)-filled with silica (PLA-SiO2); ICON + nanofibers of (PLA)-filled with calcium incorporated into a silica network (SiO2-CaP). Then, the specimens were subjected to a pH-cycling demineralizing/remineralizing model for 7 days at 37 °C. The %ΔSH change (after treatment), %SH loss and %SH recovery (after pH-cycling regimen) were calculated after SH evaluation (n = 9/group). The Ca/P weight ratio before and after pH-cycling regimen was evaluated through SEM/EDX. The results of DC were analyzed through the T-test (p < 0.05). ANOVA followed by Tukey's test (p < 0.05) was performed for hardness and EDX. A significant SH increase was observed in the ICON/SiO2CaP group (p < 0.05). The ICON/PLA-SiO2 presented higher DC values than the control group (p = 0.043). All groups presented significant difference in %ΔSH (p < 0.05), although the specimens treated with ICON/SiO2CaP presented greater values. Regarding the %SHL and %SHR, the ICON/SiO2CaP and ICON/PLA-SiO2 were significantly different compared to the control group (p < 0.001). However, no difference was observed between the ICON/SiO2CaP and ICON/PLA-SiO2. The Ca/P ratio showed that the ICON/SiO2CaP and ICON/PLA-SiO2 after the pH-cycling regimen differed from sound enamel and modified infiltrants before pH-cycling. In conclusion, tailored hybrid nanofibers may be incorporated into enamel resin infiltrants without compromise the mechanical properties of such experimental materials. These latter can inhibit the demineralization of enamel and increase its hardness during pH-clycling challange.


Assuntos
Cárie Dentária , Nanofibras , Dureza , Humanos , Dióxido de Silício , Propriedades de Superfície
12.
Rev. Odontol. Araçatuba (Impr.) ; 41(2): 34-39, maio-ago.2020. tab, graf
Artigo em Português | LILACS, BBO - odontologia (Brasil) | ID: biblio-1102682

RESUMO

As resinas Bulk fill surgiram com o intuito de facilitar a restauração de cavidades profundas. A fotoativação adequada é extremamente importante para que a resina bulk fill ofereça propriedades mecânicas satisfatórias e, longevidade na restauração. Este estudo avaliou a influência da espessura do incremento na microdureza Knoop (KHN) de três resinas bulk fill (n = 5). Cinquenta amostras foram divididas de acordo com o material (Filtek Z250, Filtek One Bulk Fill e Filtek Bulk Fill Flow), espessura (2mm e 4 mm) e tempo de fotoativação (20 e 40s) - Z2502mm20s, Z2502mm40s, One2mm20s, One2mm40s, One4mm20s, One4mm40s, Flow2mm20s, Flow2mm40s, Flow4mm20s e Flow4mm40s. As análises KHN foram realizadas no topo e na base de cada amostra. Os dados foram submetidos à ANOVA a 1 critério e ao Teste de Tukey (p< 0,05). A média e desvio padrão (+/-) dos seguintes grupos foram (Z2502mm20s) 0,85 (+/- 0,01); (Z2502mm40s) 0,92 (+/- 0,01); (One2mm20s) 1,05 (+/- 0,08); (One2mm40s) 0,95 (+/- 0,04); (One4mm20s) 0,93 (+/- 0,04); (One4mm40s) 0,97 (+/ - 0,04); (Flow2mm20s) 0,92 (+/- 0,05); (Flow2mm40s) 0,89 (+/- 0,04); (Flow4mm20s) 0,79 (+/- 0,04) e (Flow4mm40s) 0,90 (+/- 0,03). Os grupos da Filtek One Bulk apresentaram um valor significativamente maior, demonstrando uma polimerização suficiente mesmo na base de incrementos com 4 mm. Concluiu-se que o aumento na espessura do incremento de resinas bulk fill não afetou negativamente a fotoativação(AU)


Bulk fill composites emerged, allowing the restoration of deep cavities easily. Appropriate lightcuring is crucial to bulk fill composite presents satisfactory mechanical properties and restoration longevity. This study evaluated the influence of thickness increment on Knoop microhardness (KHN) of three dental bulk fill composites (n=5). Fifty samples were divided according to composite (Filtek Z250, Filtek One Bulk Fill and Filtek Bulk Fill Flow), thickness (2mm and 4 mm) and time lightcuring (20 and 40 s) - Z2502mm20s, Z2502mm40s, One2mm20s, One2mm40s, One4mm20s, One4mm40s, Flow2mm20s, Flow2mm40s, Flow4mm20s e Flow4mm40s. KHN analysis were performed on the top and the base of each specimen. Data were subjected to one-way ANOVA and Tukey test (p< 0,05). The mean and standard deviation (+/-) of following groups were (Z2502mm20s) 0,85(+/-0,01); (Z2502mm40s) 0,92(+/- 0,01); (One2mm20s) 1,05(+/-0,08); (One2mm40s) 0,95(+/-0,04); (One4mm20s) 0,93 (+/-0,04); (One4mm40s) 0,97(+/-0,04); (Flow2mm20s) 0,92(+/- 0,05); (Flow2mm40s) 0,89(+/-0,04); (Flow4mm20s) 0,79(+/-0,04) e (Flow4mm40s) 0,90(+/-0,03) Filtek One Bulk groups present significantly higher value, demonstrating sufficient polymerization even on the base of 4 mm increments. It was concluded that the increase in the thickness increment of Bulk fill composites did not negatively affect the lightcure(AU)


Assuntos
Resinas Compostas , Testes de Dureza , Materiais Dentários , Polimerização
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA