Crowding in the Eye Lens: Modeling the Multisubunit Protein ß-Crystallin with a Colloidal Approach.

We present a multiscale characterization of aqueous solutions of the bovine eye lens protein ßH crystallin from dilute conditions up to dynamical arrest, combining dynamic light scattering, small-angle x-ray scattering, tracer-based microrheology, and neutron spin echo spectroscopy. We obtain a comprehensive explanation of the observed experimental signatures from a model of polydisperse hard spheres with additional weak attraction. In particular, the model predictions quantitatively describe the multiscale dynamical results from microscopic nanometer cage diffusion over mesoscopic micrometer gradient diffusion up to macroscopic viscosity. Based on a comparative discussion with results from other crystallin proteins, we suggest an interesting common pathway for dynamical arrest in all crystallin proteins, with potential implications for the understanding of crowding effects in the eye lens.

Soft particles in an electric field - a zero average contrast study.

We report on the structural properties of ionic microgel particles subjected to alternating electric fields, using small-angle neutron scattering. The experiments were performed under so-called zero average contrast conditions, which cancel the structure factor contribution to the scattered intensity, allowing us to obtain direct information on the single particle size and structure as particles align in field-induced strings. Our results reveal only a marginal compression of the particles as they align in strings, and indicate considerable particle overlap at higher field strengths. These findings provide further insight into the origins of the previously reported unusual path dependent field-induced crystal-crystal transition found for these systems (P. S. Mohanty et al., Phys. Rev. X, 2015, 5, 011030).

A new look at effective interactions between microgel particles.

Thermoresponsive microgels find widespread use as colloidal model systems, because their temperature-dependent size allows facile tuning of their volume fraction in situ. However, an interaction potential unifying their behavior across the entire phase diagram is sorely lacking. Here we investigate microgel suspensions in the fluid regime at different volume fractions and temperatures, and in the presence of another population of small microgels, combining confocal microscopy experiments and numerical simulations. We find that effective interactions between microgels are clearly temperature dependent. In addition, microgel mixtures possess an enhanced stability compared to hard colloid mixtures - a property not predicted by a simple Hertzian model. Based on numerical calculations we propose a multi-Hertzian model, which reproduces the experimental behavior for all studied conditions. Our findings highlight that effective interactions between microgels are much more complex than usually assumed, displaying a crucial dependence on temperature and on the internal core-corona architecture of the particles.

Deswelling behaviour of ionic microgel particles from low to ultra-high densities.

The swelling of ionic microgel particles is investigated at a wide range of concentrations using a combination of light, X-ray and neutron scattering techniques. We employ a zero-average contrast approach for small-angle neutron scattering experiments, which enables a direct determination of the form factor at high concentrations. The observed particle size initially decreases strongly with the particle concentration in the dilute regime but approaches a constant value at intermediate concentrations. This is followed by a further deswelling at high concentrations above particle overlap. Theory and experiments point at a pivotal contribution of dangling polymer ends to the strong variation in size of ionic microgels, which presents itself mainly through the hydrodynamics properties of the system.

Interpenetration of polymeric microgels at ultrahigh densities.

Soft particles such as polymeric microgels can form ultra-dense phases, where the average center-to-center distance a s can be smaller than the initial unperturbed particle diameter σ 0, due to their ability to interpenetrate and compress. However, despite of the effort devoted to microgels at ultrahigh densities, we know surprisingly little about their response to their environment at effective volume fractions ϕ eff above close packing (ϕ cp ), and the existing information is often contradictory. Here we report direct measurements of the size and shape of poly(N-isopropylacrylamide) microgels at concentrations below and above ϕ cp using the zero average contrast method in small-angle neutron scattering. We complement these experiments with measurements of the average interparticle distances using small-angle x-ray scattering, and a determination of the glass transition using dynamic light scattering. This allows us to unambiguously decouple interaction effects from density-dependent variations of the particle size and shape at all values of ϕ eff . We demonstrate that the microgels used in this study significantly interpenetrate and thus change their size and shape only marginally even for ϕ eff ≫ ϕ cp , a finding that may require changes in the interpretation of a number of previously published studies on the structural and dynamic properties of dense soft particle systems.

Cubosomes for in vivo fluorescence lifetime imaging.

Herein we provided the first proof of principle for in vivo fluorescence optical imaging application using monoolein-based cubosomes in a healthy mouse animal model. This formulation, administered at a non-cytotoxic concentration, was capable of providing both exogenous contrast for NIR fluorescence imaging with very high efficiency and chemospecific information upon lifetime analysis. Time-resolved measurements of fluorescence after the intravenous injection of cubosomes revealed that the dye rapidly accumulated mainly in the liver, while lifetimes profiles obtained in vivo allowed for discriminating between free dye or dye embedded within the cubosome nanostructure after injection.

Docetaxel-Loaded Fluorescent Liquid-Crystalline Nanoparticles for Cancer Theranostics.

Here, we describe a novel monoolein-based cubosome formulation engineered for possible theranostic applications in oncology. The Docetaxel-loaded nanoparticles were stabilized in water by a mixture of commercial Pluronic (poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer) F108 (PF108) and rhodamine- and folate-conjugated PF108 so that the nanoparticles possess targeting, therapeutic, and imaging properties. Nanoparticles were investigated by DLS, cryo-TEM, and SAXS to confirm their structural features. The fluorescent emission characterization of the proposed formulation indicated that the rhodamine conjugated to the PF108 experiences an environment less polar than water (similar to chloroform), suggesting that the fluorescent fragment is buried within the poly(ethylene oxide) corona surrounding the nanoparticle. Furthermore, these nanoparticles were successfully used to image living HeLa cells and demonstrated a significant short-term (4 h incubation) cytotoxicity effect against these cancer cells. Furthermore, given their analogy as nanocarriers for molecules of pharmaceutical interest and to better stress the singularities of these bicontinuous cubic nanoparticles, we also quantitatively evaluated the differences between cubosomes and multilamellar liposomes in terms of surface area and hydrophobic volume.

Water-Insoluble Surface Coatings of Polyion-Surfactant Ion Complex Salts Respond to Additives in a Surrounding Aqueous Solution.

Hydrated, but water-insoluble, "complex salts" (CS) composed of alkyltrimethylammonium surfactant ions with polyacrylate counterions are known to exhibit a rich phase behavior in bulk mixtures with water and have recently been shown to act as water-responsive surface coatings. Here it is shown, by SAXS measurements, that surface coatings of CS also respond to various added solutes in a surrounding aqueous solution, by altering their liquid crystalline structure. The obtained results provide new information on the phase behavior of CS in contact with water and aqueous solutions. Solutes such as acids, salts, excess ionic surfactant, or water-soluble polymers act on the CS by altering the polyion charge density, screening the electrostatic interaction, changing the curvature of the surfactant aggregate, or increasing the osmotic pressuring in the surrounding solution, all of which may result in a phase transition in the film. In water, all studied CS surface coatings had a micellar cubic structure, which could change to 2D hexagonal, HCP, or disordered micellar structure, depending on the identity of the CS and the identity and concentration of the added solute. For some systems, even dissolved CO2 from the ambient air was sufficient to induce a structural change in the film. Especially the films containing the long polyions remained intact even for large concentrations of solutes in the contacting solutions, and extensive washing in water resulted, in most cases, in films with the "original" structure found in water.

Thermo-Resistant Soft Glassy Suspensions of Polymeric Micellar Nanoparticles in Ionic Liquid.

We report the rheological and structural properties of a suspension comprising poly(ethylene oxide)-polystyrene-poly(ethylene oxide) core-shell micellar nanoparticles dispersed in 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid. A liquid to soft solid transition was observed at a copolymer concentration of 10 wt % above which an elastic soft material was formed, which was composed of non-ordered jammed core-shell micellar nanoparticles. In the soft solid state, a significant reduction in the size of the nanoparticles, approaching hard sphere behavior, was observed by small-angle X-ray scattering which is attributed to compression of the soft poly(ethylene oxide) coronas. The nonvolatile ionic liquid-based glassy soft solid formed exhibited remarkable thermal stability with a melting temperature of 141 °C at 20 wt % copolymer, which renders it suitable for applications involving elevated temperatures and/or reduced pressure where water-based formulations are inappropriate.

Interactions of small dendrimers with sodium dodecyl sulfate at the air-water interface.

We have determined how the bulk behavior of mixtures of small cationic poly(amidoamine) dendrimers (generation 2, PAMAM-G2) and sodium dodecyl sulfate (SDS) affects the structure and composition of the adsorbed layers at the air-water interface. The aim is to reveal how the size of a well-defined hyperbranched polyelectrolyte affects the interfacial and bulk solution behavior of mixtures with oppositely charged surfactants, when the size of the polyelectrolyte approaches that of the surfactant. A combination of electrophoretic mobility, UV-vis spectroscopy, dynamic light scattering, and small-angle X-ray scattering measurements have been employed to characterize the interactions in the bulk solution. PAMAM-G2 associates strongly with SDS in the bulk, forming large aggregates where the size and the charge depend on the bulk composition. We show that kinetically trapped aggregates can be formed at compositions outside the equilibrium two-phase region, and the positively charged aggregates are larger than the negative ones. Surface tensiometry, neutron reflectometry, and ellipsometry have been used to reveal the properties of the interfacial layers. The interfacial structures formed depend strongly on the bulk composition: structured layers are present for samples inside the two-phase region, whereas intact nanostructured aggregates adsorb for samples just outside the two-phase region. The interfacial behavior of PAMAM-G2/SDS mixtures is compared with that of small amines or multivalent ions and oppositely charged surfactants. The implications of aggregate adsorption, dissociation, and spreading processes are discussed as well as the potential of small dendrimers for applications involving the delivery of functional molecules to interfaces.

The effect of protein PEGylation on physical stability in liquid formulation.

The presence of micron aggregates in protein formulations has recently attracted increased interest from regulatory authorities, industry, and academia because of the potential undesired side effects of their presence. In this study, we characterized the micron aggregate formation of hen egg-white lysozyme (Lyz) and its diPEGylated (5 kDa) analog as a result of typical handling stress conditions. Both proteins were subjected to mechanical stress in the absence and presence of silicone oil (SO), elevated temperatures, and freeze-thaw cycles. Flow imaging microscopy showed that PEGylated Lyz formed approximately half as many particles as Lyz, despite its lower apparent thermodynamic stability and more loose protein fold. Further characterization showed that the PEGylation led to a change from attractive to repulsive protein-protein interactions, which may partly explain the reduced particle formation. Surprisingly, the PEGylated Lyz adsorbed an order of magnitude faster onto SO, despite being much larger in size, as determined by small-angle X-ray scattering and dynamic light scattering measurements. Thus, PEGylation may significantly reduce, but not prevent, micron aggregate formation of a protein during typical handling stresses.

On the self-assembly of a tryptophan labeled deoxycholic acid.

Self-assembly of peptides and bile acids has been widely investigated because of their biological role and their potential as a tool for the preparation of nanostructured biomaterials. We herein report both the synthesis and the self-association behavior of a compound that combines the aggregation properties of bile acid- and amino acid-based molecules. The derivative has been prepared by introducing a L-tryptophan residue into the C-3 position of the deoxycholic acid skeleton and resulted in an amphoteric fluorescent labeled bile acid that shows a pH-dependent self-assembly. Under alkaline conditions it assembles into 28 nm diameter tubules, thus showing a completely different behavior compared to the precursor bile acid, which forms micelles under similar conditions. Upon heating the tubules break and turn into micelles, leading to an increase in the exposure to water of the tryptophan residue. On the other hand, in acidic solutions it aggregates into elongated micelles that further self-assemble forming a gel network, when an electrolyte is added.

Sugar-bile acid-based bolaamphiphiles: from scrolls to monodisperse single-walled tubules.

The introduction of a mannose residue on carbon 3 of lithocholic acid gives rise to an asymmetric and rigid bolaamphiphilic molecule, which self-assembles in water to form elongated tubular aggregates with an outer diameter of about 20 nm. These tubular structures display a temporal evolution, where the average tube diameter decreases with time, which can be followed by time-resolved small-angle X-ray scattering experiments. Cryogenic transmission electron microscopy images collected as a function of time show that at short times after preparation tubular scrolls are formed via the rolling of layers, after which a complex transformation of the scrolls into single-walled tubules takes place. At long time scales, a further evolution occurs where the tubules both elongate and become narrower. The observed self-assembly confirms the tendency of bile acids and their derivatives to form supramolecular aggregates with an ordered packing of the constituent molecules. It also demonstrates that scrolls can be formed as intermediate structures in the self-assembly process of monodisperse single-walled tubules.

Sterically stabilized colloids with tunable repulsions.

When studying tunable electrostatic repulsions in aqueous suspensions of charged colloids, irreversible colloid aggregation or gelation may occur at high salt concentrations. For many commonly used synthetic colloids, such as polystyrene and silica particles, the reason for coagulation is the presence of unbalanced, strongly attractive, and short-ranged van der Waals (VDW) forces. Here, we present an aqueous polystyrene model colloid that is sterically stabilized against VDW attractions. We show that the synthesis procedure, based on a neutral initiator couple and a nonionic surfactant, introduces surface charges that can be further increased by the addition of charged comonomer methacrylic acid. Thus, the interactions between the polystyrene spheres can be conveniently tuned from hard-sphere-like to charge-stabilized with long-ranged electrostatic repulsions described by a Yukawa-type pair potential. The particle size, grafting density, core-shell structure, and surface charge are characterized by light and neutron scattering. Using X-ray and neutron scattering in combination with an accurate analytic integral equation scheme for the colloidal static structure factor, we deduce effective particle charges for colloid volume fractions ≥0.1 and salt concentrations in the range of 1.5 to 50 mM.

Structure and dynamics of soft repulsive colloidal suspensions in the vicinity of the glass transition.

We use a combination of different scattering techniques and rheology to highlight the link between structure and dynamics of dense aqueous suspensions of soft repulsive colloids in the vicinity of a glass transition. Three different latex formulations with an increasing amount of the hydrophilic component resulting in either purely electrostatically or electrosterically stabilized suspensions are investigated. From the analysis of the static structure factor measured by small-angle X-ray scattering, we derive an effective volume fraction that includes contributions from interparticle interactions. We further investigate the dynamics of the suspensions using 3D cross-correlation dynamic light scattering (3DDLS) and rheology. We analyze the data using an effective hard sphere model and in particular compare the linear viscoelasticity and flow behavior to the predictions of mode coupling theory, which accounts for a purely kinetic glass transition determined by the equilibrium structure factor. We demonstrate that seemingly very different colloidal systems exhibit the same generic behavior when the effects from interparticle interactions are incorporated using an effective volume fraction description.

Aggregation behavior of bovine κ- and ß-casein studied with small angle neutron scattering, light scattering, and cryogenic transmission electron microscopy.

In the native bovine casein micelle the calcium sensitive caseins (α(S1)-, α(S2)- and ß-casein) sequester amorphous calcium phosphate in nanometer-sized clusters, whereas the calcium-insensitive κ-casein limits the growth of the micelle. In this paper, we further investigate the self-association of κ- and ß-casein, which are two of the key proteins that control the substructure of the milk casein micelle, using neutron and light scattering techniques and cryogenic transmission electron microscopy. Results demonstrate that κ-casein can, apart from the known self-assembly, form amyloid-like fibrils already at temperatures of 25 °C when subject to agitation. This extended aggregation behavior of κ-casein is inhibited by ß-casein, as reported by others. These findings have implications for the structure and stability of casein micelles. The neutron scattering data was used to gain information on the self-assembly structure of κ-casein. ß-Casein shows similar self-association behavior as κ-casein, but unlike κ-casein, the self-association exhibits temperature dependence within the studied temperatures (6 and 25 °C). Here, we will discuss our extended study of the known self-assembly of casein in the context of the fibrillation of κ-casein.

Light and neutron scattering study of PEG-oleate and its use in emulsion polymerization.

Steric stabilization of colloids forms a robust mechanism to obtain colloids that are stable in a variety of environments, and that can be used to study the phase behavior of hard or soft spheres. We report the synthesis of sterically stabilized colloids in an aqueous environment using readily dissolvable surfactants, with an unsaturated hydrophobic tail. We synthesized a new surfactant by esterification of a poly(ethylene glycol) (PEG) chain of 4.1 kg/mol with oleic acid, called PEG4OA. The micellization of PEG4OA was characterized by light and neutron scattering, which yielded values for the aggregation number and the overall size that are in excellent agreement with a comparable surfactant with a saturated octadecane chain, Brij 700. We successfully used PEG4OA in the emulsion polymerization of polystyrene colloids. In comparison with the smaller surfactant Tween 80, PEG4OA yielded smaller colloids with radii around 50 nm, and the addition of 1-dodecanethiol reduced the formation of aggregates during the synthesis. A contrast variation study with small angle neutron scattering (SANS) showed that a dense PEG layer was grafted to the colloid surface.

Viscoelastic properties of polystyrene and poly(methyl methacrylate) dispersions sterically stabilized by hydrophobically modified inulin (polyfructose) polymeric surfactant.

Recently, steric repulsive forces induced by a new graft copolymer surfactant, which is based in inulin (polyfructose), have been described. Previous investigations by atomic force microscopy between solid surfaces covered with adsorbed surfactant indicated strong repulsive forces even at high electrolyte concentration, due to the steric repulsion produced by the surfactant hydration. In the present paper, the colloidal stabilization provided by this surfactant is studied by rheology. The measurements were carried out on sterically stabilized polystyrene (PS) and poly(methyl methacrylate) (PMMA) containing adsorbed surfactant (INUTEC SP1). Steady-state shear stress as a function of shear rate curves was established at various latex volume fractions. The viscosity volume fraction curves were compared with those calculated using the Doughtry-Krieger equation for hard sphere dispersions. From the experimental eta r-phi curves the effective volume fraction of the latex dispersions could be calculated and this was used to determine the adsorbed layer thickness Delta. The value obtained was 9.6 nm, which is in good agreement with that obtained using atomic force microscopy (AFM). Viscoelastic measurements of the various latex dispersions were carried out as a function of applied stress (to obtain the linear viscoelastic region) and frequency. The results showed a change from predominantly viscous to predominantly elastic response at a critical volume fraction (phi c). The effective critical volume fraction, phi eff, was calculated using the adsorbed layer thickness (Delta) obtained from steady-state measurements. For PS latex dispersions phi eff was found to be equal to 0.24 whereas for PMMA phi eff=0.12. These results indicated a much softer interaction between the latex dispersions containing hydrated polyfructose loops and tails when compared with latices containing poly(ethylene oxide) (PEO) layers. The difference could be attributed to the stronger hydration of the polyfructose loops and tails when compared with PEO. This clearly shows the much stronger steric interaction between particles stabilized using hydrophobically modified inulin.