Subcutaneous mechano-electrocardiogram (MECG) sensor for complementary cardiac diagnosis.

Since the heart pumps out the blood through the excitation-contraction coupling, simultaneous monitoring of the electrical and mechanical characteristics is beneficial for comprehensive diagnosis of cardiac disorders. Currently, these characteristics are monitored separately with electrocardiogram (ECG) and medical imaging techniques. This work presents a fully implantable device named mechano-electrocardiogram (MECG) sensor that can measure mechanocardiogram (MCG) and ECG together. The key to the success is fabrication of permeable electrodes on a single low-modulus porous nanofiber mat, which helps immediate adhesion of the sensor on the tissue. A strain-insensitive electrode is used as the ECG electrode and a strain-sensitive electrode is used for MCG. The MECG device is implanted subcutaneously in the skin above the heart of the rat. Through a vasopressor (phenylephrine) injection test, the MECG signals indicate that the MCG amplitude is related with blood pressure and the ECG peak interval is more related with heart rate. These results confirm that the MECG device is clinically meaningful for continuous and comprehensive monitoring of the electrical and mechanical characteristics of the heart.

High-Precision Stretchable Ionic Temperature Sensor Passivated with a Liquid Metal/Block Copolymer Multilayer Film.

Moisture barriers are essential for ionic sensors because moisture has a direct impact on the stability and reliability of electrochemical properties. So far, stretchable moisture barriers that can maximize the advantage of using deformable ion gel as the active material have been rarely investigated and remain as a technological challenge. This study proposes a four-layer (4L) stretchable moisture barrier alternatively composed of a poly(styrene-isobutylene-styrene) copolymer (SiBS) film (2 µm in thickness) and a eutectic gallium-indium liquid metal (LM) film (1 µm in thickness). This multilayer barrier has a low water permeability of 9.09 × 10-20 m2/Pa s at 50% uniaxial strain (ε) and retains the barrier properties at repeated stretchable cycles at ε = 50%. This study demonstrates a skin-attached precise ion gel-based temperature sensor that is independent of moisture change (even dipping in water) and body motions.

Water-Saturated Ion Gel for Humidity-Independent High Precision Epidermal Ionic Temperature Sensor.

Although ion gels are attractive sensing materials for deformable epidermal sensors or implantable devices, their sensing performances are highly affected by environmental humidity change, so that their sensing reliability cannot be secured. This study proposes a new concept of maintaining the high-precision temperature sensing performance of highly deformable ion gel sensors. In this approach, a hydrophobic ion gel sensing layer is kept water-saturated by attaching a hydrogel layer, rather than attempting to completely block water penetration. This study performs experimental and theoretical investigation on water concentration in the ion gel, using the analysis of mass transportation at the interface of the ion gel and the hydrogel. By using the charge relaxation time of the ionic molecules, the temperature sensor is not affected by environmental humidity in the extreme range of humidity (30%-100%). This study demonstrates a highly deformable on-skin temperature sensor which shows the same performance either in water or dry state and while exercising with large strains (ε = 50%).

Air-Permeable Waterproofing Electrocardiogram Patch to Monitor Full-Day Activities for Multiple Days.

On-skin healthcare patch-type devices have great technological challenges in monitoring full-day activities and wearing for multiple days without detachment. These challenges can be overcome when the sensor is air permeable but waterproof. This study presents a light-weight, highly stable, and stretchable Au electrode that is fabricated by sputtering on an imidized nanofiber mat. The contact surface of the electrode is hydro-wetting and the outer surface of the electrode is hydrophobic, so the porous electrode simultaneously has excellent sweat permeability and waterproofing capabilities. The electrode is applied to the electrocardiogram sensor for monitoring the cardiac signals for five consecutive days without detaching while doing various full-day activities such as relaxing, exercising, showering, and sleeping. This study suggests a modular setup of the electrodes and the cardiac signal processing unit for activating the device when cardiac monitoring is required.

Dynamic tactility by position-encoded spike spectrum.

In fast and transient somatosensory processing, the relative timing of the selected spikes is more important than the spike frequency because the ensemble of the first spikes in the spike trains encodes the dynamic tactile information. Here, inspired by the functional effectiveness of the selected spikes, we propose an artificial dynamic sensory system based on position-encoded spike spectrum. We use a mixed ion-electron conductor to generate a potential spike signal. We design artificial receptors that have different ion relaxation times (τ); thus, a sequence of the spikes from the receptors creates a spike spectrum, providing the spatial information (position and motion trace) and the temporal information (speed and dynamic contact area). The artificial receptors can be incorporated by as much as 132/square centimeters by using only two global signal addressing lines for sensor operation. Structural simplicity of the device opens the possibility of scalable fabrication with dense receptor integration. With computational decoding of the position-encoded spike spectrum, the artificial sensory system can recognize complicated dynamic motions in real time. The high-resolution spatiotemporal tactile perception in the ionic artificial sensory system enables the real-time dynamic robotic manipulation.

Synthesis of EDTA-functionalized graphene oxide-chitosan nanocomposite for simultaneous removal of inorganic and organic pollutants from complex wastewater.

Discharging of inorganic and organic pollutants creates a serious threat to the human health and the environment. In the current work, we have synthesized Ethylenediaminetetraacetic acid (EDTA) functionalized graphene oxide-chitosan nanocomposite (GO-EDTA-CS) for simultaneous removal of inorganic (i.e., mercury (Hg(II) and copper (Cu(II)) and organic pollutants (i.e., methylene blue (MB) and crystal violet (CV)) from wastewater via adsorption process. The structural, functional, morphological, elemental compositions, surface area and thermal properties of the synthesized nanocomposite were identified using powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), Brunauer-Emmett-Teller (BET), and thermogravimetric analyzer (TGA), respectively. Different batch adsorption experiments such as pH effect, contact time, initial pollutants concentration, reusability etc. were studied in monocomponent system to optimize the results. The adsorption process apparently followed pseudo-second-order (PSO) kinetics for both pollutants, however the adsorption kinetics was also explained by the intra-particle diffusion model. The isotherm data for both metals ions and dyes were well fit by the Langmuir isotherm model. The maximum adsorption capacities of the adsorbent were determined 324 ± 3.30 130 ± 2.80, 141 ± 6.60, and 121 ± 3.50 mg g-1 for Hg(II), Cu(II), MB, and CV, respectively. The excellent adsorption capacity was attributed to the availability of various active functional groups (e.g., -COOH, -OH, -NH2, etc.) on the adsorbent. The EDS, elemental mapping and FTIR analysis performed before and after the adsorption of heavy metals and dyes by GO-EDTA-CS confirmed the simultaneous adsorption of the pollutants. Moreover, GO-EDTA-CS could maintain its adsorption capacity for both inorganic and organic pollutants even after seven cycles of adsorption-desorption, indicating itself a promising adsorbent for practical wastewater treatment containing both inorganic and organic toxic pollutants.

Electroactive 1T-MoS2 Fluoroelastomer Ink for Intrinsically Stretchable Solid-State In-Plane Supercapacitors.

Full advantage of stretchable electronic devices can be taken when utilizing an intrinsically stretchable power source. High-performance stretchable supercapacitors with a simple structure and solid-state operation are good power sources for stretchable electronics. This study suggests a new type of intrinsically stretchable, printable, electroactive ink consisting of 1T-MoS2 and a fluoroelastomer (FE). The active material (1T-MoS2/FE) is made by fluorinating the metallic-phase MoS2 (1T-MoS2) nanosheets with the FE under high-power ultrasonication. The MoS2 in the 1T-MoS2/FE has unconventional crystal structures in which the stable cubic (1T) and distorted 2H structures were mixed. The printed line of the 1T-MoS2/FE on the porous stretchable Au collector electrodes is intrinsically stretchable at more than ε = 50% and has good specific capacitance (28 mF cm-2 at 0.2 mA cm-2) and energy density (3.15 mWh cm-3). The in-plane all-solid-state stretchable supercapacitor is stretchable at ε = 40% and retains its relative capacity (C/Co) by 80%. This printable device platform potentially opens up the in-plane fabrication of stretchable micro-supercapacitor devices for wearable electronic applications.

Spin texture induced by non-magnetic doping and spin dynamics in 2D triangular lattice antiferromagnet h-Y(Mn,Al)O3.

Novel effects induced by nonmagnetic impurities in frustrated magnets and quantum spin liquid represent a highly nontrivial and interesting problem. A theoretical proposal of extended modulated spin structures induced by doping of such magnets, distinct from the well-known skyrmions has attracted significant interest. Here, we demonstrate that nonmagnetic impurities can produce such extended spin structures in h-YMnO3, a triangular antiferromagnet with noncollinear magnetic order. Using inelastic neutron scattering (INS), we measured the full dynamical structure factor in Al-doped h-YMnO3 and confirmed the presence of magnon damping with a clear momentum dependence. Our theoretical calculations can reproduce the key features of the INS data, supporting the formation of the proposed spin textures. As such, our study provides the first experimental confirmation of the impurity-induced spin textures. It offers new insights and understanding of the impurity effects in a broad class of noncollinear magnetic systems.

Impact of particulate matter on primary leaves of Vigna radiata (L.) R. Wilczek.

Particulate matter (PM) pollution is of great concern for human health and vegetation. In this study, we investigated the impact of PM on primary (unifoliate) leaves of Vigna radiata (L.) R.Wilczek by exposing leaves' adaxial surface to PM. Leaves exposed to PM showed accumulation of various metal(loid)s even after removal of epicuticular wax (EW) revealing that the metals/metalloids could penetrate through the cuticular barrier. Scanning electron microscopic studies revealed that even after thorough washing with water, a significant amount (~55%) of particles were retained on the leaf surface. Leaves did not show any particles on their surface post EW removal, revealing that particles adhered to EW. Exposing primary leaves to PM did not alter their size but gave rise to smaller sized trifoliate leaves. A decline in Chl a/b of PM-exposed primary leaves suggested that PM cause a shading effect on leaves. PM-exposed primary leaves also showed a decline in sugar levels. However, the trifoliate leaves did not show any variation in Chl a/b as well as sugar levels. Our findings furnish evidence for the negative effects of PM on plants and a probable dietary exposure of humans to PMs, warranting more in-depth studies on the potential risks of PMs in agricultural sector.

Human health risks assessment for airborne PM10-bound metals in Seoul, Korea.

Seoul, the capital city of South Korea, is the social, political, and economic center of the country. Significant levels of PM10-bound As metalloid and metals have been found in the city, which poses possible adverse health risks to the residents from inhalation exposure. Therefore, this study focuses on the health risk assessment of age-dependent cancer and non-cancer using exposure pathway and human respiratory tract (HRT) mass deposition models. In the case of non-cancer risks, the hazard quotient (HQ) of As via ingestion exposure and the hazard index (HI) was found to be significant (> 1) for the children. The cancer risks through ingestion pathway (CRing) were estimated in the order of 10-4 and 10-5 for children and adult groups, respectively. The overall CRing levels for children were estimated slightly higher than the acceptable level of cancer risk (1 × 10-4) at all locations throughout the study area. Moreover, the risks of cancer through the inhalation (CRinh) and incremental lifetime cancer risks (ILCR) due to HRT mass deposition were found to be significant (> 10-6) and with very small discrepancy in risk levels for both age groups. Furthermore, possible sources of the PM10-bound metalloid (As) and metals were predicted through correlation, principal component, and enrichment factor analysis. The results of source apportionment study indicated the local anthropogenic emission sources (vehicular, biomass/coal/oil combustion, industrial), road dust re-suspension, and trans-boundary sources were responsible for the pollution levels in Seoul, South Korea. The health risks can be minimized by reducing the pollution levels of particulate matter at source.

Spontaneous decays of magneto-elastic excitations in non-collinear antiferromagnet (Y,Lu)MnO3.

Magnons and phonons are fundamental quasiparticles in a solid and can be coupled together to form a hybrid quasi-particle. However, detailed experimental studies on the underlying Hamiltonian of this particle are rare for actual materials. Moreover, the anharmonicity of such magnetoelastic excitations remains largely unexplored, although it is essential for a proper understanding of their diverse thermodynamic behaviour and intrinsic zero-temperature decay. Here we show that in non-collinear antiferromagnets, a strong magnon-phonon coupling can significantly enhance the anharmonicity, resulting in the creation of magnetoelastic excitations and their spontaneous decay. By measuring the spin waves over the full Brillouin zone and carrying out anharmonic spin wave calculations using a Hamiltonian with an explicit magnon-phonon coupling, we have identified a hybrid magnetoelastic mode in (Y,Lu)MnO3 and quantified its decay rate and the exchange-striction coupling term required to produce it.

Hexagonal RMnO3: a model system for two-dimensional triangular lattice antiferromagnets.

The hexagonal RMnO3(h-RMnO3) are multiferroic materials, which exhibit the coexistence of a magnetic order and ferroelectricity. Their distinction is in their geometry that both results in an unusual mechanism to break inversion symmetry and also produces a two-dimensional triangular lattice of Mn spins, which is subject to geometrical magnetic frustration due to the antiferromagnetic interactions between nearest-neighbor Mn ions. This unique combination makes the h-RMnO3 a model system to test ideas of spin-lattice coupling, particularly when both the improper ferroelectricity and the Mn trimerization that appears to determine the symmetry of the magnetic structure arise from the same structure distortion. In this review we demonstrate how the use of both neutron and X-ray diffraction and inelastic neutron scattering techniques have been essential to paint this comprehensive and coherent picture of h-RMnO3.

Magnon breakdown in a two dimensional triangular lattice Heisenberg antiferromagnet of multiferroic LuMnO3.

The breakdown of magnons, the quasiparticles of magnetic systems, has rarely been seen. By using an inelastic neutron scattering technique, we report the observation of spontaneous magnon decay in multiferroic LuMnO3, a simple two dimensional Heisenberg triangular lattice antiferromagnet, with large spin S=2. The origin of this rare phenomenon lies in the nonvanishing cubic interaction between magnons in the spin Hamiltonian arising from the noncollinear 120° spin structure. We observed all three key features of the nonlinear effects as theoretically predicted: a rotonlike minimum, a flat mode, and a linewidth broadening, in our inelastic neutron scattering measurements of single crystal LuMnO3. Our results show that quasiparticles in a system hitherto thought of as "classical" can indeed break down.