Twisted diphenoquinones fused with thiophene rings: thiophene analogs of bianthrone.

The twisted conformer of bistricyclic aromatic enes (BAEs) has a small HOMO-LUMO gap owing to the twisted double bond. In this study, we synthesized diphenoquinones fused with thiophene rings as a new twisted conformer-predominant BAE. They exhibited deep LUMO energy levels and apparent n-type semiconductor properties.

Separation of iodate, bromide, nitrite, nitrate, and iodide in seawater by ion chromatography using 1-aminoundecyl group chemically bonded silica columns.

The separation and detection of six common inorganic anions (iodate (IO3-), bromate (BrO3-), bromide (Br-), nitrite (NO2-), nitrate (NO3-), and iodide (I-)) in pure water and 35 ‰ artificial seawater were examined by ion chromatography (IC). As packing materials of separation columns, 1-aminoundecyl group chemically bonded silica (AUS) gels were prepared. Separation of the anions in pure water was achieved using separation columns (150 mm × 4.6 mm i.d.) packed with the AUS gels, 0.1 M NaCl + 5 mM phosphate buffer (pH 4.5) as eluent, and a UV detector (wavelength 225 nm). The anions in artificial seawater were separated and detected with a 300 mm-long column without interferences by matrix anions such as chloride (Cl-) and sulfate (SO42-). The stationary phases have high-capacity anion-exchange/hydrophilic/hydrophobic interaction mixed-modes. The IC system was applied to five inorganic anions, IO3-, Br-, NO2-, NO3-, and I- in seawater of the Seto-Inland Sea, Japan. The detection limits (DLs, S/N = 3) were 11 µg L-1 (IO3-), 93 (Br-), 1.3 (NO2-), 1.4 (NO3-), and 1.1 (I-) for a 100-µL sample injection.

The Preparation of Dithieno[3,2-b:4,5-c']germole, and Its Application as a Donor Unit in Conjugated D-A Compounds.

Group 14 metalloles have attracted much attention as core structures of conjugated functional materials. In this work, we prepared dithieno[3,2-b:4,5-c']germole as a new unsymmetrically condensed dithienogermole and benzo[4,5]thieno[2,3-c]germole as the benzene-condensed analog. The electronic states and properties of these unsymmetrically condensed germoles are discussed on the basis of the results of optical and electrochemical measurements with the help of quantum chemistry calculations on the simplified model compounds. The Stille cross-coupling reactions of bromodithieno[3,2-b:4,5-c']germole with di(stannylthienyl)- and di(stannylthiazolyl)benzothiadiazole provided conjugated donor-acceptor compounds that exhibited clear solvatochromic behavior in the photoluminescence spectra, indicating the potential application of the dithieno[3,2-b:4,5-c']germole unit as an electron donor in donor-acceptor systems.

Synthesis of Unsymmetrically Condensed Benzo- and Thienotriazologermoles.

Germoles and siloles unsymmetrically condensed with heteroaromatic units are attracting much interest. In this study, compounds containing a triazologermole core unit condensed with a benzene or thiophene ring were prepared. Thienotriazologermole was subjected to bromination to obtain the bromide, which underwent transformation via the palladium-catalyzed Stille coupling reaction to form triphenylamine-substituted thienotriazolegermole, with an effective extension of conjugation. The electronic states and properties of these triazologermole derivatives are discussed on the basis of optical and electrochemical measurements and density functional theory calculations. Triphenylamine-substituted thienotriazolegermole showed clear solvatochromic properties in photoluminescence measurements, suggesting that intramolecular charge transfer occurs at the photo-excited state. This clearly indicates that the triazologermole unit is useful as an acceptor of donor-acceptor compounds. The potential application of triphenylamine-substituted thienotriazolegermole as a sensing material was also explored.

Insights into mechanistic interpretation of crystalline-state reddish phosphorescence of non-planar π-conjugated organoboron compounds.

Metal-free room-temperature phosphorescent (RTP) materials are attracting attention in such applications as organic light-emitting diodes and bioimaging. However, the chemical structures of RTP materials reported thus far are mostly predominantly based on π-conjugated systems incorporating heavy atoms such as bromine atoms or carbonyl groups, resulting in limited structural diversity. On the other hand, triarylboranes are known for their strong Lewis acidity and deep LUMO energy levels, but few studies have reported on their RTP properties. In this study, we discovered that compounds based on a tetracyclic structure containing boron, referred to as benzo[d]dithieno[b,f]borepins, exhibit strong solid-state reddish phosphorescence even in air. Quantum chemical calculations, including those for model compounds, revealed that the loss of planarity of the tetracyclic structure increases spin-orbit coupling matrix elements, thereby accelerating the intersystem crossing process. Moreover, single-crystal X-ray structural analysis and natural energy decomposition analysis suggested that the borepin compounds without bromine or oxygen atoms, unlike typical RTP materials, exhibit red-shifted phosphorescence in the crystalline state owing to structural relaxation in the T1 state. Additionally, the borepin compounds showed potential application as bioimaging dyes.

Phosphorescence Properties of Boron/Bismuth Hybrid Conjugated Materials.

By introducing main-group elements such as boron and bismuth to π-conjugated systems, it is possible to modify the optical properties of π-conjugated materials through orbital interactions between the orbital on the elements and π/π*-orbitals, and the heavy atom effect. Moreover, bismuth, which is the heaviest stable element, induces a significant heavy atom effect, making organobismuth compounds promising for applications as phosphorescent materials. In this study, we synthesized new room-temperature phosphorescent materials by incorporating bismuth into thiophene units. The phosphorescence properties of these materials, such as emission lifetime and wavelength, could be further controlled by combining tricoordinate boron with the thienylbismuth structures. The synthesized bismuth- and boron-containing thiophene compounds exhibited phosphorescence at room temperature in both solution and solid states. Furthermore, the introduction of boron raised the energy of the triplet state in the π-conjugated system, resulting in a blue shift of the phosphorescence wavelength. The analysis of photoluminescence properties and TD-DFT calculations revealed that the introduction of bismuth enhances phosphorescence properties, whereas the introduction of boron further promotes intersystem crossing.

Synthesis and Properties of Boron-Containing Heteromerous Bistricyclic Aromatic Enes: Structural Effects on Thermodynamic Stability and Photoreactivity.

Overcrowded bistricyclic aromatic enes (BAEs) have several conformations such as twisted and anti-folded conformers, and their stereochemistry and chromism have been studied in earnest. In this study, boron-containing heteromerous BAEs having various tricyclic structures were synthesized and their photophysical properties investigated. Single-crystal X-ray analysis revealed that the introduction of a rigid fluorene unit resulted in a twisted conformer, whereas the introduction of flexible units such as thioxanthene and 9,9-dimethyl-9,10-dihydroanthracene units resulted in an anti-folded conformer. The absorption spectra of the heteromerous BAEs were dependent on the introduced tricyclic structures, suggesting the immense impact of the tricyclic structures on the electronic structures of BAEs. DFT calculations revealed the large effect of the flexibility of the tricyclic structures on the thermodynamic stability of the conformers. In addition, the boron-containing heteromerous BAEs underwent photocyclization reactions, indicating their potential application as precursors of polyaromatic hydrocarbons and helical aromatic materials.

Highly luminescent antiaromatic diborinines with fused thiophene rings.

Tricoordinate boron-incorporated π-conjugated systems are widely investigated as optoelectronic materials because of their unique p-π* orbital interactions and high Lewis acidity. Among them, thiophene-fused diborinines are characterized by moderate antiaromaticity and extended conjugation. In this work, we have developed two new dithienodiborinines with C2h and C2v symmetries, which exhibited completely different optical properties. The thiophene-fused diborinines synthesized in this study showed excellent fluorescence properties both in solution and in the solid state, with quantum yields of up to 95%. The high antiaromaticity enhanced the Lewis acidity of the boron centers, as proven by the large association constants with fluoride ion estimated from titration experiments. The high Lewis acidity and the superior luminescence property have enabled their application as fluorescent sensor materials for the detection of ammonia vapor.

Development of Highly Water-Permeable Robust PSQ-Based RO Membranes by Introducing Hydroxyethylurea-Based Hydrophilic Water Channels.

Copolymerization of bis[3-(triethoxysilyl)propyl]amine (BTESPA) and N-(2-hydroxyethyl)-N'-[3-(triethoxysilyl)propyl]urea (HETESPU) provided highly permeable robust reverse osmosis (RO) membranes that have an organically bridged polysilsesquioxane (PSQ) structure. The RO experiments with NaCl aqueous solution (2000 ppm) indicated that the introduction of hydroxyethylurea groups markedly improved the permeability of water (1.86 × 10-12 m3/m2sPa) to approximately 19 times higher than that of a membrane prepared via the BTESPA homopolymerization, with NaCl rejection remaining nearly unchanged (96%). This is the highest water permeability obtained so far for PSQ-based membranes that show higher than 90% NaCl rejection. The improvement of water permeability is likely due to aggregation through hydrogen bonding in the PSQ layer, which can be regarded as a hydrophilic water channel.

Robust and Transparent Antifogging Polysilsesquioxane Film Containing a Hydroxy Group.

Poly(glycidyloxypropyl)silsesquioxane (PGPS) was successfully synthesized by hydrolysis and polycondensation using the nitrogen flow method. A poly(3-(2,3-dihydroxypropoxypropyl)silsesquioxane) (PSQ-OH) film was prepared via two routes. In route A, PSQ-OH was prepared by the hydrolysis of the epoxy group of PGPS in an aqueous hydrochloric acid (HCl)/tetrahydrofuran solution, affording a diol group; then, PSQ-OH was coated on a glass substrate and heated. The antifogging performance of the PSQ-OH film was evaluated in terms of water uptake (WU) and scratch resistance. The obtained PSQ-OH film exhibited a low WU of 5% and a scratch resistance of 1.6. In route B, PGPS was coated on a glass substrate and immersed in a 0.5 mol/L aqueous sulfuric acid solution for 1-15 h at room temperature, producing a diol group. The solid-state 13C nuclear magnetic resonance spectrum indicated that the epoxy group was completely hydrolyzed after immersion for 15 h. The WU of the PSQ-OH film prepared via route B increased from 5 to 19% with the increase in the immersion time and was higher than that of the PSQ-OH film prepared via route A. The PSQ-OH film on a glass substrate retained transparency under water vapor exposure at 60 °C. The PSQ-OH film prepared via route B exhibited a high scratch resistance of 2.7-3.6, similar to that of a poly(3-(2-aminoethylaminopropyl)silsesquioxane) film. The scratch resistance of the PSQ-OH film was 5-7 times higher than that of the poly(vinyl alcohol) film. The PSQ-OH film was uniform with no pinholes and cracks. The PSQ-OH film was transparent and colorless and exhibited a high transmittance of >90% in the wavelength range of 400-800 nm. Overall, the prepared PSQ-OH film exhibits good antifogging, transparency, and mechanical properties.

Asymmetric Synthesis of Bridged N-Heterocycles with Tertiary Carbon Center through Barbas Dienamine-Catalysis: Scope and Applications.

A direct aza-Diels-Alder reaction between 2-aryl-3H-indolin-3-ones and cyclic-enones has been developed to access chiral indolin-3-one fused polycyclic bridged compounds. This method proceeds via proline-catalyzed Barbas-dienamine intermediate formation from various cyclic-enones such as 2-cyclopenten-1-one, 2-cyclohexene-1-one, and 2-cycloheptene-1-one, followed by a reaction with 2-aryl-3H-indol-3-ones. Several indolin-3-ones fusing [2.2.2], [2.2.1], and [3.2.1] skeletons decorated with a tertiary carbon chiral center have been prepared. Computational studies (DFT) supported the observed stereoselectivity in the method. The synthesized compounds have shown exciting photophysical activities and selective sensing of Pd2+ and Fe3+ ions through the fluorescence quenching "switch-off" mode.

Crack- and Shrinkage-Free Ethylene-Bridged Polysilsesquioxane Film Prepared by a Hydrosilylation Reaction.

With the aim of developing an improved strategy for the preparation of ethylene-bridged polysilsesquioxanes as thermal insulator materials, this paper describes the synthesis of a crack- and shrinkage-free ethylene-bridged polysilsesquioxane film by the hydrosilylation reaction of hydrodimethyl-silylated oligomethylsilsesquioxane (MSQ-SiH) and dimethylvinyl-silylated oligomethylsilsesquioxane (MSQ-SiVi) in the presence of Karstedt's catalyst. Polysilsesquioxane precursors were prepared by the sol-gel reaction of triethoxymethylsilane and the successive capping reaction with chlorodimethylsilane and chlorodimethylvinylsilane. The obtained ethylene-bridged polysilsesquioxane film showed lower density and thermal diffusivity (1.13 g/cm3 and 1.15 × 10-7 m2/s, respectively) than a polymethylsilsesquioxane film (1.34 g/cm3 and 1.36 × 10-7 m2/s, respectively). As a result of the introduction of the SiCCSi ethylene bridge, the thermal insulation property of the polysilsesquioxane film was enhanced.

Thiophene-based twisted bistricyclic aromatic ene with tricoordinate boron: a new n-type semiconductor.

The incorporation of tricoordinate boron into conjugated systems is of current interest in the field of organic electronics. In this study, a tricoordinate boron-embedded thiophene-based bistricyclic aromatic ene (BAE) was synthesized as a new boron-containing conjugated system. The combination of tricoordinate boron and fused thiophene rings imposed the twisted conformation in the BAE structure, resulting in the narrow energy absorption with the low-lying LUMO. Preliminary studies on the application of the highly electron-deficient boron-embedded BAE to organic field-effect transistors (OFETs) were also performed, revealing its moderately high electron mobility.

Ethylene-bridged polysilsesquioxane/hollow silica particle hybrid film for thermal insulation material.

Ethylene-bridged polysilsesquioxane (EBPSQ) was prepared by the sol-gel reaction of bis(triethoxysilyl)ethane. The whitish slurry was prepared by mixing EBPSQ and hollow silica particles (HSPs) with a median diameter of 18-65 µm at 80 °C, and it formed a hybrid film by heating at 80 and 120 °C for 1 h at each temperature, then at 200 °C for 20 min. The surface temperatures of EBPSQ films containing 10 wt% and 20 wt% of HSPs (90.2 °C-90.5 °C) were lower than those of EBPSQ films (93.6 °C), when the films on the duralumin plate were heated at 100 °C for 10 min from the bottom of the duralumin plate. The thermal conductivity/heat flux (k/q) obtained from the temperature difference between the surface temperature and bottom temperature of the films and the film thickness also decreased with adding the HSPs. EBPSQ film without HSPs exhibited T 5 d of 258 °C and T 10 d of 275 °C. However, EBPSQ film containing 20 wt% of HSPs exhibited high thermal stability, and T 5 d and T 10 d were 299 °C and 315 °C, respectively. Interestingly, T 5 d and T 10 d of the hybrid films increased with an increase in the number of HSPs. Overall, it was shown that HSPs could improve the thermal insulation properties and thermal stability.

Optical Characteristics of Hybrid Macrocycles with Dithienogermole and Tricoordinate Boron Units.

The introduction of unconventional elements into π-conjugated systems has been studied to manipulate the electronic states and properties of compounds. Herein, boron- and germanium-containing hybrid macrocycles, as a new class of element-hybrid conjugated systems, have been synthesized. The palladium-catalyzed Stille cross coupling of bis(bromothienyl)borane and bis(trimethylstannylthienyl)- or bis(trimethylstannylphenyl)-substituted dithienogermoles as the boron- and germanium-containing building blocks, respectively, produced a mixture of several macrocyclic compounds. Single-crystal X-ray analysis of the 2:2 coupling product revealed a planar structure with a cavity inside the macrocycle. The optical properties of the macrocyclic products indicated rather small electronic interactions between the building units. However, intramolecular photoenergy transfer from the dithienogermole unit to the boron unit was clearly observed with respect to the fluorescence spectra.

Direct Amine-Catalyzed Enantioselective Synthesis of Pentacyclic Dibenzo[b,f][1,4]oxazepine/Thiazepine-Fused Isoquinuclidines along with DFT Calculations.

A direct protocol for the asymmetric synthesis of dibenzoxazepine/thiazepine-fused [2.2.2] isoquinuclidines is developed. The reaction proceeds through a proline-catalyzed direct Mannich reaction followed by an intramolecular aza-Michael cascade sequence between 2-cyclohexene-1-one and various tricyclic imines, like dibenzoxazepines/thiazepines, as an overall [4 + 2] aza-Diels-Alder reaction. A series of pentacyclic isoquinuclidines have been prepared, with complete endo-selectivity, in good to high yields and excellent enantioselectivity (>99:1). Density functional theory (DFT) calculations further support the observed high stereochemical outcome of the reaction.

Crystal Structures and Phosphorescent Properties of Group†14 Dipyridinometalloles and Their Copper Complexes.

We recently reported dipyridinosilole (DPyS) and dipyridinogermole (DPyG) as π-conjugated units that show low-temperature phosphorescence. A copper complex of DPG shows solid-state phosphorescence at room temperature. In this work, we prepared diphenyldipyridinostannole (DPySn1). Its optical and electrochemical properties were investigated and compared with those of DPyS1 and DPyG1 with the same phenyl substituents. DPySn1 showed the most red-shifted phosphorescence at 520 nm at 77 K in the solid-state, which is likely due to the intermolecular Sn-pyridine interaction that was confirmed by single-crystal X-ray diffraction. Copper complexes of DPyS1 and DPySn1 were also prepared and it was found that the phosphorescence of these dipyridinometallole-copper complex solids was red-shifted in the order of DPySn1-Cu (617 nm)

Model-based research toward design of innovative materials: molecular weight prediction of bridged polysilsesquioxanes.

Toward the design and manipulation of innovative materials, we propose a new concept called "model-based research (MBR)". In MBR, measurable physical and chemical properties of materials are mathematically modelled by explanatory parameters obtained by computer simulation from an atomistic point of view. To demonstrate the potential of MBR, we modelled the molecular weights of a series of polysilsesquioxanes with respect to the H2O/silane molar ratio employed for the polymerization of monomers bis(triethoxysilyl)methane, ethane, ethylene, and acetylene (BTES-M, -E1, -E2, and -E3), as an example. The equation y = ax n well reproduced the behaviour of the molecular weights of the BTES series, in which a and n were obtained using the calculated molecular parameters for monomers as the explanatory parameters. Detailed understanding and discussion were theoretically possible on the basis of the mathematical model. We predicted the molecular weights of polymers that would be obtained from monomers BTES-P and BTES-Ph with C3H6 and C6H4 as the spacer, respectively, using the mathematical model. Experimental validation of these polymers clearly showed the possibility of qualitative categorization. Our proposed concept, MBR, is a powerful tool to analyse materials science toward innovative materials design.

Direct comparison of dithienosilole and dithienogermole as π-conjugated linkers in photosensitizers for dye-sensitized solar cells.

Dithienosilole (DTS) and dithienogermole (DTG) are useful building units of π-conjugated organic materials. In the present work, donor-π-acceptor (D-π-A) dyes with bis(dihexyloxyphenyl)aminophenyl, DTS or DTG, and pyridine or cyanoacrylic acid as the donor (D), the π-conjugated linker (π), and the acceptor (A) units, respectively, were prepared and their optical properties were investigated. The D-π-A dyes exhibited strong absorption in the visible region, indicating efficient intramolecular donor-acceptor interaction. The addition of trifluoroacetic acid to solutions of pyridine-containing dyes led to red-shifts of the absorption bands as a result of pyridinium salt formation. Similar red-shifts were observed for cyanoacrylic acid dyes, which were due to the enhanced formation of neutral dyes relative to the separated ion pairs. The D-π-A dyes, however, showed similar absorption spectra when attached to the TiO2 surface, indicating that the dye-TiO2 electronic interaction was rather weak. In contrast to the finding that these dyes exhibited similar optical properties regardless of the π-linker (i.e., DTS or DTG), dye-sensitized solar cells (DSSCs) based on DTG-containing dyes exhibited superior performance compared to those based on DTS-containing dyes. Electrochemical impedance spectroscopy measurements supported the higher performance of the DSSCs with DTG-containing dyes.

Helical assembly of a dithienogermole exhibiting switchable circularly polarized luminescence.

Dithienogermole derivatives S- and R-1 possessing phenylisoxazoles and chiral side chains were synthesized. The helical assembly of 1 in methylcyclohexane exhibited circularly polarized luminescence (CPL). The CPL signals of the assembly in the elongation regime were inverted with respect to those in the nucleation regime.