RESUMO
The molecular structure of wood is mainly based on cellulose, lignin, and hemicellulose. However, low concentrations of lipids, phenolic compounds, terpenoids, fatty acids, resin acids, and waxes can also be found. In general, their color, smell, texture, quantity, and distribution of pores are used in human sensory analysis to identify native wood species, which may lead to erroneous classification, impairing quality control and inspection of commercialized wood. This study developed a fast and accurate method to discriminate Brazilian native commercial wood species using Fourier Transform Infrared Spectroscopy (FTIR) and machine learning algorithms. It not only solves the limitations of traditional methods but also goes beyond as it allows fast analyses to be obtained at low cost and high accuracy. In this work, we provide the identification of five Brazilian native wood species: Angelim-pedra (Hymenolobium petraeum Ducke), Cambara (Gochnatia polymorpha), Cedrinho (Erisma uncinatum), Champagne (Dipteryx odorata), and Peroba do Norte (Goupia glabra Aubl). The results showed the great potential of FTIR and multivariate analysis for wood sample classification; here, the Linear SVM differentiated the five wood species with an accuracy of 98%. The developed method allows industries, laboratories, companies, and control bodies to identify the nature of the wood product after being extracted and semi-manufactured.
RESUMO
The rise of antibiotic-resistant bacteria calls for innovative approaches to combat multidrug-resistant strains. Here, the potential of the standard histological stain, Giemsa, to act as a photosensitizer (PS) for antimicrobial photodynamic inactivation (aPDI) against methicillin-sensitive Staphylococcus aureus (MSSA) and methicillin-resistant Staphylococcus aureus (MRSA) strains is reported. Bioassays were performed using various Giemsa concentrations (ranging from 0.0 to 20.0 µM) under 625 nm illumination at a light dose of 30 J cm-2. Remarkably, Giemsa completely inhibited the growth of MSSA and MRSA bacterial colonies for concentrations at 10 µM and higher but exhibited no inhibitory effect without light exposure. Partition coefficient analysis revealed Giemsa's affinity for membranes. Furthermore, we quantified the production of reactive oxygen species (ROS) and singlet oxygen (1O2) to elucidate the aPDI mechanisms underlying bacterial inactivation mediated by Giemsa. These findings highlight Giemsa stain's potential as a PS in aPDI for targeting multidrug-resistant bacteria.
Assuntos
Anti-Infecciosos , Staphylococcus aureus Resistente à Meticilina , Fotoquimioterapia , Infecções Estafilocócicas , Humanos , Fármacos Fotossensibilizantes/farmacologia , Fármacos Fotossensibilizantes/uso terapêutico , Corantes Azur/farmacologia , Corantes Azur/uso terapêutico , Fotoquimioterapia/métodos , Staphylococcus aureus , Anti-Infecciosos/uso terapêutico , Infecções Estafilocócicas/tratamento farmacológicoRESUMO
In this work, excitation-emission matrices (EEMs) were used in association with parallel factor analysis (PARAFAC) to assess biodiesel content in undiluted diesel-biodiesel blends (DBBs) without pre-sample preparation. EEMs were decomposed using the PARAFAC (EEMs-PARAFAC), and the loading values of the PARAFAC component as a function of biodiesel content in the blends were used to build an analytical model to quantify the biodiesel content in DBBs. The proposed model presenting a limit of detection (LOD) and a limit of quantification (LOQ) of 2.5% and 11% w/w, respectively, successfully predicted the biodiesel content in the validation samples. The robustness of the model was confirmed by a close analysis of the root mean square error of prediction, standard error of prediction, relative standard deviation of prediction, and Bias. Therefore, an accurate and robust analytical model based on EEMs-PARAFAC was developed to quantify the biodiesel content in undiluted DBBs without sample preparation.
Assuntos
Biocombustíveis , Biocombustíveis/análise , Espectrometria de Fluorescência/métodos , Análise FatorialRESUMO
A miniaturized and low-cost electrochemical 3D-printed system for rapid and accurate quantification of ethanol content in ethanol fuel using electrochemical impedance spectroscopy (EIS) was developed. The monolithic design of the system incorporates insulating thermoplastic electrode separators, with only the cover being mobile, allowing for easy assembly and handling. The portable device, measuring approximately 26 × 24 mm, has a maximum capacity of 1 mL, making it suitable for lab-on-a-chip and portable analysis. By utilizing the dielectric constant of ethanol and ethanol fuel mixtures with water, the miniaturized EIS cell quantifies ethanol content effectively. To validate its performance, we compared measurements from four gas stations with a digital densimeter, and the values obtained from the proposed system matched perfectly. Our miniaturized and low-cost electrochemical 3D-printed device can be printed and assembled in two hours, offering a cost-effective solution for fast and precise ethanol quantification. Its versatility, affordability, and compatibility with lab-on-a-chip platforms make it easily applicable, including for fuel quality control and on-site analysis in remote locations.
RESUMO
This study reports curcumin as an efficient photolarvicide against Aedes aegypti larvae under natural light illumination. Larval mortality and pupal formation were monitored daily for 21 days under simulated field conditions. In a sucrose-containing formulation, a lethal time 50 (LT50) of 3 days was found using curcumin at 4.6 mg L-1. This formulation promoted no larval toxicity in the absence of illumination, and sucrose alone did not induce larval phototoxicity. The photodegradation byproducts (intermediates) of curcumin were determined and the photodegradation mechanisms proposed. Intermediates with m/z 194, 278, and 370 were found and characterized using LC-MS. The ecotoxicity of the byproducts on non-target organisms (Daphnia, fish, and green algae) indicates that the intermediates do not exhibit any destructive potential for aquatic organisms. The results of photodegradation and ecotoxicity suggest that curcumin is environmentally safe for non-target organisms and, therefore, can be considered for population control of Ae. aegypti.
Assuntos
Aedes , Curcumina , Inseticidas , Animais , Curcumina/farmacologia , Inseticidas/farmacologia , Larva , Fotólise , Sacarose , Luz SolarRESUMO
Visceral leishmaniasis is a neglected disease caused by protozoan parasites of the genus Leishmania. The successful control of the disease depends on its accurate and early diagnosis, which is usually made by combining clinical symptoms with laboratory tests such as serological, parasitological, and molecular tests. However, early diagnosis based on serological tests may exhibit low accuracy due to lack of specificity caused by cross-reactivities with other pathogens, and sensitivity issues related, among other reasons, to disease stage, leading to misdiagnosis. In this study was investigated the use of mid-infrared spectroscopy and multivariate analysis to perform a fast, accurate, and easy canine visceral leishmaniasis diagnosis. Canine blood sera of 20 noninfected, 20 Leishmania infantum, and eight Trypanosoma evansi infected dogs were studied. The data demonstrate that principal component analysis with machine learning algorithms achieved an overall accuracy above 85% in the diagnosis.
Assuntos
Doenças do Cão , Leishmania infantum , Leishmaniose Visceral , Animais , Doenças do Cão/diagnóstico , Cães , Ensaio de Imunoadsorção Enzimática , Leishmaniose Visceral/diagnóstico , Leishmaniose Visceral/veterinária , Aprendizado de Máquina , Sensibilidade e Especificidade , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Vegetable oils have been used for different applications and, more recently, as an active host medium to obtain nanoparticles for employment in bionanotechnological applications. Nevertheless, oils are very susceptible to oxidation during production, storage, and transportation because of their chemical composition. Consequently, any modification in their production must be accompanied by an analysis of the oxidative stability. In this study, naked and biocompatible gold nanoparticles (AuNPs) were grown on sunflower oil during sputtering deposition using different deposition times. Size and morphology were determined by transmission electron microscopy (TEM) and their concentrations were found by inductively coupled plasma-optical emission spectroscopy (ICP-OES). Rancimat® method was employed to evaluate the AuNPs influence on the oxidative stability of the vegetable oil. Well-dispersed quasi-spherical NPs were produced with a mean diameter in the 2.9-3.7 nm range and they were concentration-dependent on the deposition time. A concentration of about 11 mg/L, 38 mg/L, and 225 mg/L of AuNPs was obtained for a deposition time of 5 min, 15 min, and 30 min, respectively. The results also revealed that AuNPs negatively affected the oxidative stability of the sunflower oil and exponentially reduced the induction period (IP) with the increase in AuNPs content. IP reductions of 63%, 77%, and 81% were determined for the AuNPs containing samples at 11 mg/L, 38 mg/L, and 225 mg/L. For the first time, it is reported that naked AuNPs promote the rapid degradation of vegetable oil and this points out the need for attention relative to the quality of vegetable oils used to host metal nanoparticles.
RESUMO
Technological advances in recent decades, especially in molecular genetics, have enabled the detection of genetic DNA markers associated with productive characteristics in animals. However, the prospection of polymorphisms based on DNA sequencing is still expensive for the reality of many food-producing regions around the world, such as Brazil, demanding more accessible prospecting methods. In the present study, the Fourier transform infrared spectroscopy (FTIR) and machine learning algorithms were used to identify single nucleotide polymorphism (SNP) in animal DNA. The fragments of bovine DNA with well-known polymorphisms were used as a model. The DNA fragments were produced and genotyped by PCR-RFLP and classified according to the genotype (homozygous or heterozygous). FTIR spectra of DNA fragments were analyzed by principal component analysis (PCA) and machine learning algorithms. The best results exhibited 75-95% accuracy in the classification of bovine genotypes. Therefore, FTIR spectroscopy and multivariate analysis can be used as an alternative tool for prospecting polymorphisms in animal DNA. The method can contribute with studies to identify genetic markers associated with animal production and indirectly with food production itself, and reduce pressure on available natural resources.
Assuntos
DNA , Aprendizado de Máquina , Animais , Brasil , Bovinos , Análise de Componente Principal , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
This study evaluates the photosensitizing effectiveness of sodium copper chlorophyllin, a natural green colorant commonly used as a food additive (E-141ii), to inactivate methicillin-sensitive and methicillin-resistant Staphylococcus aureus under red-light illumination. Antimicrobial photodynamic inactivation (aPDI) was tested on a methicillin-sensitive reference strain (ATCC 25923) and a methicillin-resistant Staphylococcus aureus strain (GenBank accession number Mh087437) isolated from a clinical sample. The photoinactivation efficacy was investigated by exposing the bacterial strains to different E-141ii concentrations (0.0, 1.0, 2.5, 5.0, 10.0, and 20.0 µM) and to red light (625 nm) at 30 J cm-2. The results showed that E-141ii itself did not prevent bacterial growth for all tested concentrations when cultures were placed in the dark. By contrast, E-141ii photoinactivated both methicillin-sensitive Staphylococcus aureus (MSSA) and methicillin-resistant Staphylococcus aureus (MRSA) under red-light illumination. However, different dose responses were observed for MSSA and MRSA. Whilst the MSSA growth was inhibited to the detection limit of the method with E-141ii at 2.5 µM, >10 µM concentrations were required to inhibit the growth of MRSA. The data also suggest that E-141ii can produce reactive oxygen species (ROS) via Type I reaction by electron transfer from its first excited singlet state to oxygen molecules. Our findings demonstrate that the tested food colorant has great potential to be used in aPDI of MRSA.
Assuntos
Corantes de Alimentos/farmacologia , Staphylococcus aureus Resistente à Meticilina/efeitos dos fármacos , Viabilidade Microbiana/efeitos dos fármacos , Fotoquimioterapia , Corantes de Alimentos/química , Staphylococcus aureus Resistente à Meticilina/crescimento & desenvolvimento , Testes de Sensibilidade Microbiana , Espécies Reativas de Oxigênio/metabolismo , Espectrometria de Fluorescência , Espectrofotometria UltravioletaRESUMO
A novel approach to distinguish soybean seed vigor based on Fourier transform infrared spectroscopy (FTIR) associated with chemometric methods is presented. Batches with high and low vigor soybean seeds were analyzed. Support vector machine (SVM), K-nearest neighbors (KNN), and discriminant analysis were applied to the raw spectral and reduced-dimensionality data from PCA (principal component analysis). Proteins, fatty acids, and amides were identified as the main molecules responsible for the discrimination of the batches. The cross-validation tests pointed out that high vigor soybean seeds were successfully discriminated from low vigor ones with an accuracy of 100%. These findings indicate FTIR spectroscopy associated with multivariate analysis as a new alternative approach to discriminate seed vigor.
Assuntos
Algoritmos , Glycine max , Análise Discriminante , Aprendizado de Máquina , SementesRESUMO
In the last few decades, Portland/residue composites have been researched due to their technological and environmental advantages. In this study, residues of Acrocomia aculeata (Jacq.) Lodd endocarp (AE) were introduced in the Portland cement-soil (PC) matrix in different concentrations (0, 5, 10, 15, 20, and 50 wt%) to produce PC/AE bricks. The characterization of the microstructures of the bricks indicate agglomerates of AE particles with increased humidity in small regions distributed throughout the matrix. Mid-infrared and laser-induced breakdown spectroscopy, along with thermogravimetry, indicated that AE contained mainly lignin and cellulose, as well as inorganic chemical elements such as Mg and Si. X-ray studies revealed that AE did not affect the crystallographic properties of the Portland/AE bricks. The findings indicate that the use of AE improved the thermal insulation capability of the composites with a small impact on the compressive strength.
RESUMO
Most of the population is dependent on supplemental products to reach the recommended level of omega-3 polyunsaturated fatty acid (ω-3 PUFA) intake. Thus, knowledge about the quality of ω-3 supplements is important for their safe consumption. In this work, attenuated total reflectance-Fourier transform infrared (ATR-FTIR) and nuclear magnetic resonance (NMR) spectroscopy were applied to assess the quality of fourteen commercial ω-3 supplements. Using ATR-FTIR data, we could identify whether ω-3 PUFA was esterified as either triacylglyceride (71%) or ethyl (29%) esters in ω-3 supplements. The type of esterification is rarely included in the product labels, although the consumer should have the right to choose which form of the supplement to consume. On the other hand, 1H NMR spectra were useful to determine the relative concentration of eicosapentaenoic (EPA) and docosahexaenoic (DHA) acids, and ω-3 PUFA in these commercial samples. Ethyl esters have higher concentrations of unsaturated fatty acids. The NMR results showed a good agreement between the obtained and declared DHA and EPA amounts on the product labels, except for one sample whose high level of ω-3 PUFA indicated it to be a vegetable oil-enriched supplement. Moreover, ω-3 supplements from Schizochytrium sp. microalgae oil revealed higher levels of DHA and ω-3 PUFA, but lower levels of EPA than fish oil. These findings indicate the need for a constant assessment of the quality of commercial products whose ATR-FTIR spectra could be routinely used for the evaluation of PUFA esterification, and NMR analysis could be used to provide advanced quantitative information on commercial ω-3 supplements.
RESUMO
Nanotechnology is an emerging field in science and engineering, which presents significant impacts on the economy, society and the environment. The nanomaterials' (NMs) production, use, and disposal is inevitably leading to their release into the environment where there are uncertainties about its fate, behaviour, and toxicity. Recent works have demonstrated that NMs can penetrate, translocate, and accumulate in plants. However, studies about the effects of the NMs on plants are still limited because most investigations are carried out in the initial stage of plant development. The present study aimed to evaluate and characterize the photochemical efficiency of photosystem II (PSII) of broad bean (Vicia faba) leaves when subjected to silver nanoparticles (AgNPs) with diameters of 20, 51, and 73â¯nm as well as to micrometer-size Ag particles (AgBulk). The AgNPs were characterized by transmission electron microscopy and dynamic light scattering. The analyses were performed by injecting the leaves with 100â¯mgâ¯L-1 aqueous solution of Ag and measuring the chlorophyll fluorescence imaging, gas exchange, thermal imaging, and reactive oxygen species (ROS) production. In addition, silver ion (Ag+) release from Ag particles was determined by dialysis. The results revealed that AgNPs induce a decrease in the photochemical efficiency of photosystem II (PSII) and an increase in the non-photochemical quenching. The data also revealed that AgNPs affected the stomatal conductance (gs) and CO2 assimilation. Further, AgNPs induced an overproduction of ROS in Vicia faba leaves. Finally, all observed effects were particle diameter-dependent, increasing with the reduction of AgNPs diameter and revealing that AgBulk caused only a small or no changes on plants. In summary, the results point out that AgNPs may negatively affect the photosynthesis process when accumulated in the leaves, and that the NPs themselves were mainly responsible since negligible Ag+ release was detected.
Assuntos
Nanopartículas Metálicas/toxicidade , Folhas de Planta/efeitos dos fármacos , Prata/toxicidade , Vicia faba/efeitos dos fármacos , Fotossíntese/efeitos dos fármacos , Folhas de Planta/fisiologia , Vicia faba/fisiologiaRESUMO
Multi-Energy Calibration (MEC) was recently proposed as an innovative analytical method to be used in efficient and accurate quantitative analysis based on atomic spectroscopy. Here, the applicability of the MEC method for quantifying molecular species using UV-Vis and fluorescence measurements was evaluated for the first time. UV-Vis and fluorescence spectra of the analytical solutions of methylene blue and eosin-methylene blue in two different solvents (distilled-deionized water and methanol) were collected. MEC showed high precision and sensitivity for determining the analyte concentration, providing similar limit of detection and quantification when compared with conventional analytical methods, such as external standard calibration and standard additions. Therefore, the present study has shown that MEC can be successfully applied for quantifying molecular species in a simple and efficient way accounting UV-Vis and fluorescence spectroscopy.
RESUMO
The use of silver nanoparticles (AgNPs) in commercial products has increased significantly in recent years. However, findings on the toxic effects of the AgNPs are still limited. This paper reports an investigation on the cytotoxic and genotoxic potential of the AgNPs on root cells of Allium cepa. Germination (GI), root elongation (REI), mitotic (MI), nuclear abnormality (NAI), and micronucleus index (MNI) were determined for seeds exposed to various AgNPs diameters (10, 20, 51, and 73â¯nm) as well as to the silver bulk (AgBulk) (micrometer-size particles) at the concentration of 100â¯mg·L-1. Transmission electron microscopy (TEM) provided the particle size distribution, while dynamic light scattering (DLS) was used to get the hydrodynamic size, polydispersity index, and zeta potential of the AgNPs. Laser-induced breakdown spectroscopy (LIBS) and inductively coupled plasma/optical emission spectrometry (ICP OES) were applied for quantifying the AgNPs content uptake by roots. Silver dissolution was determined by dialysis experiment. Results showed that the AgNPs penetrated the roots, affecting MI, GI, NAI, and MNI in meristematic cells. Changes in these indicators were AgNPs diameter-dependent so that cytotoxic and genotoxic effects in Allium cepa increased with the reduction of the particle diameter. The results also revealed that the AgNPs were the main responsible for the cytotoxicity and genotoxicity since negligible silver dissolution was observed.
Assuntos
Allium/efeitos dos fármacos , Citotoxinas/efeitos adversos , Meristema/efeitos dos fármacos , Nanopartículas Metálicas/efeitos adversos , Mutagênicos/efeitos adversos , Prata/efeitos adversos , Testes de Mutagenicidade , Tamanho da Partícula , Raízes de Plantas/efeitos dos fármacos , Células-Tronco/efeitos dos fármacosRESUMO
This work describes the development and tests of a new ultrasonic spectrometer for liquids based on the use of commercial cuvettes for sample handling. The spectrometer operates in the frequency range from 20 to 80 MHz and gathers some important characteristics, which are its high thermal stability (better than 0.01 °C), by the use of Peltier cells, and practical sample handling with small volume (≤3 ml) samples placed inside cuvettes which can be easily removed from the spectrometer, cleaned/sterilized, or simply discarded. Through-transmission operation is used to measure propagation velocity and attenuation coefficient, and the spectrometer was tested with mixtures of water and NaCl, which have attenuations smaller than that of distilled water, and higher attenuation samples of silicone and castor oil. Backscattering studies of polystyrene particles of 10- and 15- [Formula: see text] diameters were also conducted, showing the versatility of the instrument.
RESUMO
Aedes aegypti (Ae. aegypti) is a competent vector for transmitting important viral diseases such as yellow fever, dengue, chikungunya, and Zika. Several strategies have been applied to avoid Ae. aegypti proliferation by using environmental management, biological, and chemical approaches. However, the development of new methods for effective control of the insect vector population is still needed. Photodynamic control is an alternative way to control the vector population by using a physical approach based on the larval phototoxicity of a photosensitizer. In this context, the present study evaluated the use of eosin-methylene blue (EMB) as a new photosensitizer for photodynamic control of Ae. aegypti larval populations. The photodynamic assays were performed submitting Ae. aegypti third-instar larvae to different EMB concentrations (0.0, 0.5, 1.0, 5.0, 10.0, 50.0, and 100.0 µg mL-1) in combination of three different light doses (24.3, 48.6, and 97.2 J cm-2) under either white-light radiation from RGB LEDs or sunlight. The results demonstrated that EMB presented a rapid internalization into the larvae and was phototoxic. The photodynamic action induced 100% of larval mortality after about 40 min of sunlight irradiation even using low EMB concentration (0.5 µg mL-1). The findings reveal EMB as an effective photoactive compound to control larval populations of Ae. aegypti by photodynamic process induced by either sunlight or white-light from RGB LEDs.
RESUMO
The use of eosin methylene blue according to Giemsa as photosensitizer is presented for the first time in this paper. The present study evaluated the potential application of chlorophyllin sodium copper salt (CuChlNa) and eosin methylene blue according to Giemsa (EMB) as antimicrobial photosensitizers (aPS) for photodynamic inactivation (PDI) of Staphylococcus aureus (gram-positive) and Escherichia coli (gram-negative) bacteria. The experiments were performed using S. aureus stain ATCC 25923 and E. coli ATCC 25922 in which five aPS concentrations (0.0, 1.0, 2.5, 5.0, 10.0, and 20.0 µM for S. aureus and 0.0, 5.0, 10.0, 20.0, 40.0, and 50.0 µM for E. coli) were prepared and added in 2 mL of a saline solution containing the bacterial inoculum. After aPS incubation, the samples were divided into two groups, one kept in the dark and another submitted to the illumination. Then, the bacterial inactivation was determined 18 h after the incubation at 37 °C by counting the colony-forming units (CFU). The results revealed that both EMB and CuChlNa can be used as aPS for the photoinactivation of S. aureus, while only EMB was able to photoinactivate E. coli. Nevertheless, a more complex experimental setup was needed for photoinactivation of E. coli. The data showed that EMB and CuChlNa presented similar photoinactivation effects on S. aureus, in which bacterial growth was completely inhibited at photosensitizer (PS) concentrations over 5 µM, when samples were previously incubated for 30 min and irradiated by a light dose of 30 J cm-2 as a result of an illumination of 1 h at 8.3 mW cm-2 by using a red light at 625 nm with a 1 cm beam diameter and output power of 6.5 mW. In the case of E. coli, bacterial growth was completely inhibited only when combining a PS incubation period of 120 min with concentrations over 20 µM.
Assuntos
Clorofilídeos/farmacologia , Amarelo de Eosina-(YS)/farmacologia , Escherichia coli/efeitos da radiação , Luz , Azul de Metileno/farmacologia , Viabilidade Microbiana/efeitos dos fármacos , Viabilidade Microbiana/efeitos da radiação , Staphylococcus aureus/efeitos da radiação , Animais , Escherichia coli/efeitos dos fármacos , Escherichia coli/crescimento & desenvolvimento , Camundongos , Células NIH 3T3 , Fármacos Fotossensibilizantes/farmacologia , Análise Espectral , Staphylococcus aureus/efeitos dos fármacos , Staphylococcus aureus/crescimento & desenvolvimentoRESUMO
This paper reports the synthesis, characterization, and application of TiO2 and TiO2/Ag nanoparticles for use in photocatalysis, employing the herbicide methylviologen (MV) as a substrate for photocatalytic activity testing. At suitable metal to oxide ratios, increases in silver surface coating on TiO2 enhanced the efficiency of heterogeneous photocatalysis by increasing the electron transfer constant. The sol-gel method was used for TiO2 synthesis. P25 TiO2 was the control material. Both oxides were subjected to the same silver incorporation process. The materials were characterized by conventional spectroscopy, SEM micrography, X-ray diffraction, calculation of surface area per mass of catalyst, and thermogravimetry. Also, electron transfers between TiO2 or TiO2/Ag and MV in the absence and presence of sodium formate were investigated using laser flash photolysis. Oxides synthesized with 2.0 % silver exhibited superior photocatalytic activity for MV degradation.
Assuntos
Paraquat/química , Fotólise , Prata/química , Titânio/química , Purificação da Água , Catálise , Corantes , Cinética , Luz , Metais , Nanopartículas/química , Óxidos , Difração de Raios XRESUMO
Blends of biodiesel and diesel are being used increasingly worldwide because of environmental, economic, and social considerations. Several countries use biodiesel blends with different blending limits. Therefore, it is necessary to develop or improve methods to quantify the biodiesel level in a diesel/biodiesel blend, to ensure compliance with legislation. The optical technique based on the absorption of light in the mid-infrared has been successful for this application. However, this method presents some challenges that must be overcome. In this paper, we propose a novel method, based on fluorescence spectroscopy, to determine the biodiesel content in the diesel/biodiesel blend, which allows in loco measurements by using portable systems. The results showed that this method is both practical and more sensitive than the standard optical method.