RESUMO
In glucose biofuel cells (G-BFCs), glucose oxidation at the anode and oxygen reduction at the cathode yield electrons, which generate electric energy that can power a wide range of electronic devices. Research associated with the development of G-BFCs has increased in popularity among researchers because of the eco-friendly nature of G-BFCs (as related to their construction) and their evolution from inexpensive bio-based materials. In addition, their excellent specificity towards glucose as an energy source, and other properties, such as small size and weight, make them attractive within various demanding applied environments. For example, G-BFCs have received much attention as implanted devices, especially for uses related to cardiac activities. Envisioned pacemakers and defibrillators powered by G-BFCs would not be required to have conventional lithium batteries exchanged every 5-10 years. However, future research is needed to develop G-BFCs demonstrating more stable power consistency and improved lifespan, as well as solving the challenges in converting laboratory-made implantable G-BFCs into implanted devices in the human body. The categorization of G-BFCs as a subcategory of different biofuel cells and their performance is reviewed in this article.
RESUMO
This review focuses on the use of polyolefins in high-voltage direct-current (HVDC) cables and capacitors. A short description of the latest evolution and current use of HVDC cables and capacitors is first provided, followed by the basics of electric insulation and capacitor functions. Methods to determine dielectric properties are described, including charge transport, space charges, resistivity, dielectric loss, and breakdown strength. The semicrystalline structure of polyethylene and isotactic polypropylene is described, and the way it relates to the dielectric properties is discussed. A significant part of the review is devoted to describing the state of art of the modeling and prediction of electric or dielectric properties of polyolefins with consideration of both atomistic and continuum approaches. Furthermore, the effects of the purity of the materials and the presence of nanoparticles are presented, and the review ends with the sustainability aspects of these materials. In summary, the effective use of modeling in combination with experimental work is described as an important route toward understanding and designing the next generations of materials for electrical insulation in high-voltage transmission.
RESUMO
To broaden the range in structures and properties, and therefore the applicability of sustainable foams based on wheat gluten expanded with ammonium-bicarbonate, we show here how three naturally ocurring multifunctional additives affect their properties. Citric acid yields foams with the lowest density (porosity of ~50%) with mainly closed cells. Gallic acid acts as a radical scavenger, yielding the least crosslinked/ aggregated foam. The use of a low amount of this acid yields foams with the highest uptake of the body-fluid model substance (saline, ~130% after 24 hours). However, foams with genipin show a large and rapid capillary uptake (50% in one second), due to their high content of open cells. The most dense and stiff foam is obtained with one weight percent genipin, which is also the most crosslinked. Overall, the foams show a high energy loss-rate under cyclic compression (84-92% at 50% strain), indicating promising cushioning behaviour. They also show a low compression set, indicating promising sealability. Overall, the work here provides a step towards using protein biofoams as a sustainable alternative to fossil-based plastic/rubber foams in applications where absorbent and/or mechanical properties play a key role.
RESUMO
Chiral and enantiopure perfluorinated sulfonimidamides act as low-molecular weight gelators at low critical gelation concentration (<1 mg mL-1) via supramolecular polymerization in nonpolar organic solvents and more heterogenic mixtures, such as biodiesel and oil. Freeze-drying of the organogel leads to ultralight aerogel with extremely low density (1 mg mL-1). The gelation is driven by hydrogen bonding resulting in a helical molecular ordering and unique fibre assemblies as confirmed by scanning electron microscopy, CD spectroscopy, and computational modeling of the supramolecular structure.
RESUMO
The aim of this study was to evaluate the analytical performance of a novel NGS assay, intended for monitoring of donor-derived cell-free DNA (dd-cfDNA), and describe its validity in clinical plasma samples from kidney transplanted patients. Artificial and clinical samples with increasing amounts of patient DNA were evaluated using NGS analysis of indel markers. Monitoring of dd-cfDNA with the NGS assay presented herein demonstrated a sensitivity of ≥0.1% dd-cfDNA and excellent accuracy (R2 0.99) throughout an extensive range of dd-cfDNA (0.1-30%). The precision of the test was determined for two levels (0.1% (LoD) and 1%) of dd-cfDNA. The between run precision (CV%) for the respective level was 16% and 9% and the corresponding result for the within run precision was 19% and 7%. To evaluate performance of the assay in clinical samples, 507 retrospective monitoring samples from 21 patients transplanted either with kidneys from living or deceased donors were analyzed. Monitoring samples were sampled at multiple time points from 24 h up to 90 days post-transplantation. We show that in one patient, increase of dd-cfDNA preceded increase of creatinine caused by acute cellular rejection by several days. In conclusion, the NGS assay displayed a combination of high sensitivity with good accuracy and precision in both artificial and clinical dd-cfDNA samples.
Assuntos
Ácidos Nucleicos Livres , Transplante de Rim , Humanos , Sequenciamento de Nucleotídeos em Larga Escala , Estudos Retrospectivos , Biomarcadores , Rejeição de Enxerto/genéticaRESUMO
Hydrovoltaic energy harvesting offers the potential to utilize enormous water energy for sustainable energy systems. Here, we report the utilization and tailoring of an intrinsic anisotropic 3D continuous microchannel structure from native wood for efficient hydrovoltaic energy harvesting by Fe3O4 nanoparticle insertion. Acetone-assisted precursor infiltration ensures the homogenous distribution of Fe ions for gradience-free Fe3O4 nanoparticle formation in wood. The Fe3O4/wood nanocomposites result in an open-circuit voltage of 63 mV and a power density of â¼52 µW/m2 (â¼165 times higher than the original wood) under ambient conditions. The output voltage and power density are further increased to 1 V and â¼743 µW/m2 under 3 suns solar irradiation. The enhancement could be attributed to the increase of surface charge, nanoporosity, and photothermal effect from Fe3O4. The device exhibits a stable voltage of â¼1 V for 30 h (3 cycles of 10 h) showing good long-term stability. The methodology offers the potential for hierarchical organic-inorganic nanocomposite design for scalable and efficient ambient energy harvesting.
RESUMO
Graphene oxide (GO) was used in this study as a template to successfully synthesize silicon oxide (SiOx) based 2D-nanomaterials, adapting the same morphological features as the GO sheets. By performing a controlled condensation reaction using low concentrations of GO (<0.5 wt%), the study shows how to obtain 2D-nanoflakes, consisting of GO-flakes coated with a silica precursor that were ca. 500 nm in lateral diameter and ca. 1.5 nm in thickness. XPS revealed that the silanes had linked covalently with the GO sheets at the expense of the oxygen groups present on the GO surface. The GO template was shown to be fully removable through thermal treatment without affecting the nanoflake morphology of the pure SiOx-material, providing a methodology for large-scale preparation of SiOx-based 2D nanosheets with nearly identical dimensions as the GO template. The formation of SiOx sheets using a GO template was investigated for two different silane precursors, (3-aminopropyl) triethoxysilane (APTES) and tetraethyl orthosilicate (TEOS), showing that both precursors were capable of accurately templating the graphene oxide template. Molecular modeling revealed that the choice of silane affected the number of layers coated on the GO sheets. Furthermore, rheological measurements showed that the relative viscosity was significantly affected by the specific surface area of the synthesized particles. The protocol used showed the ability to synthesize these types of nanoparticles using a common aqueous alcohol solvent, and yield larger amounts (â¼1 g) of SiOx-sheets than what has been previously reported.
RESUMO
Developing simple, cost-effective, easy-to-use, and reliable analytical devices if of utmost importance for the food industry for rapid in-line checks of their products that must comply with the provisions set by the current legislation. The purpose of this study was to develop a new electrochemical sensor for the food packaging sector. More specifically, we propose a screen-printed electrode (SPE) modified with cellulose nanocrystals (CNCs) and gold nanoparticles (AuNPs) for the quantification of 4,4'-methylene diphenyl diamine (MDA), which is one of the most important PAAs that can transfer from food packaging materials into food stuffs. The electrochemical performance of the proposed sensor (AuNPs/CNCs/SPE) in the presence of 4,4'-MDA was evaluated using cyclic voltammetry (CV). The modified AuNPs/CNCs/SPE showed the highest sensitivity for 4,4'-MDA detection, with a peak current of 9.81 µA compared with 7.08 µA for the bare SPE. The highest sensitivity for 4,4'-MDA oxidation was observed at pH = 7, whereas the detection limit was found at 57 nM and the current response of 4,4'-MDA rose linearly as its concentration increased from 0.12 µM to 100 µM. Experiments using real packaging materials revealed that employing nanoparticles dramatically improved both the sensitivity and the selectivity of the sensor, which can be thus considered as a new analytical tool for quick, simple, and accurate measurement of 4,4'-MDA during converting operations.
RESUMO
Glycerol-plasticized wheat gluten was explored for producing soft high-density biofoams using dry upscalable extrusion (avoiding purposely added water). The largest pore size was obtained when using the food grade ammonium bicarbonate (ABC) as blowing agent, also resulting in the highest saline liquid uptake. Foams were, however, also obtained without adding a blowing agent, possibly due to a rapid moisture uptake by the dried protein powder when fed to the extruder. ABC's low decomposition temperature enabled extrusion of the material at a temperature as low as 70 °C, well below the protein aggregation temperature. Sodium bicarbonate (SBC), the most common food-grade blowing agent, did not yield the same high foam qualities. SBC's alkalinity, and the need to use a higher processing temperature (120 °C), resulted in high protein cross-linking and aggregation. The results show the potential of an energy-efficient and industrially upscalable low-temperature foam extrusion process for competitive production of sustainable biofoams using inexpensive and readily available protein obtained from industrial biomass (wheat gluten).
Assuntos
Glutens , Triticum , Glutens/metabolismo , Temperatura , Temperatura Alta , Glicerol/metabolismoRESUMO
Cellulose nanofibers (CNFs) were used in aqueous synthesis protocols for zinc oxide (ZnO) to affect the formation of the ZnO particles. Different concentrations of CNFs were evaluated in two different synthesis protocols producing distinctly different ZnO morphologies (flowers and sea urchins) as either dominantly oxygen- or zinc-terminated particles. The CNF effects on the ZnO formation were investigated by implementing a heat-treatment method at 400 °C that fully removed the cellulose material without affecting the ZnO particles made in the presence of CNFs. The inorganic phase formations were monitored by extracting samples during the enforced precipitations to observe changes in the ZnO morphologies. A decrease in the size of the ZnO particles could be observed for all synthesis protocols, already occurring at small additions of CNFs. At as low as 0.1 g/L CNFs, the particle size decreased by 50% for the flower-shaped particles and 45% for the sea-urchin-shaped particles. The formation of smaller particles was accompanied by increased yield by 13 and 15% due to the CNFs' ability to enhance the nucleation, resulting in greater mass of ZnO divided among a larger number of particles. The enhanced nucleation could also be verified as useful for preventing secondary morphologies from forming, which grew on the firstly precipitated particles. The suppression of secondary growths' was due to the more rapid inorganic phase formation during the early phases of the reactions and the faster consumption of dissolved salts, leaving smaller amounts of metal salts present at later stages of the reactions. The findings show that using cellulose to guide inorganic nanoparticle growth can be predicted as an emerging field in the preparation of functional inorganic micro/nanoparticles. The observations are highly relevant in any industrial setting for the large-scale and resource-efficient production of ZnO.
Assuntos
Nanofibras , Óxido de Zinco , Celulose , Oxigênio , Sais , ZincoRESUMO
Little is known about whether risk classification at diagnosis predicts post-hematopoietic cell transplantation (HCT) outcomes in patients with acute myeloid leukemia (AML). We evaluated 8709 patients with AML from the CIBMTR database, and after selection and manual curation of the cytogenetics data, 3779 patients in first complete remission were included in the final analysis: 2384 with intermediate-risk, 969 with adverse-risk, and 426 with KMT2A-rearranged disease. An adjusted multivariable analysis detected an increased risk of relapse for patients with KMT2A-rearranged or adverse-risk AML as compared to those with intermediate-risk disease (hazards ratio [HR], 1.27; P = .01; HR, 1.71; P < .001, respectively). Leukemia-free survival was similar for patients with KMT2A rearrangement or adverse risk (HR, 1.26; P = .002, and HR, 1.47; P < .001), as was overall survival (HR, 1.32; P < .001, and HR, 1.45; P < .001). No differences in outcome were detected when patients were stratified by KMT2A fusion partner. This study is the largest conducted to date on post-HCT outcomes in AML, with manually curated cytogenetics used for risk stratification. Our work demonstrates that risk classification at diagnosis remains predictive of post-HCT outcomes in AML. It also highlights the critical need to develop novel treatment strategies for patients with KMT2A-rearranged and adverse-risk disease.
Assuntos
Transplante de Células-Tronco Hematopoéticas , Leucemia Mieloide Aguda , Humanos , Leucemia Mieloide Aguda/diagnóstico , Leucemia Mieloide Aguda/genética , Leucemia Mieloide Aguda/terapia , Recidiva , Indução de RemissãoRESUMO
Cytogenetic and molecular abnormalities are known to influence post-transplant outcomes in acute myeloid leukemia (AML) but data assessing the prognostic value of combined genetic models in the HCT setting are limited. We developed an adapted European LeukemiaNet (aELN) risk classification based on available genetic data reported to the Center for International Blood and Marrow Transplant Research, to predict post-transplant outcomes in 2289 adult AML patients transplanted in first remission, between 2013 and 2017. Patients were stratified according to aELN into three groups: favorable (Fav, N = 181), intermediate (IM, N = 1185), and adverse (Adv, N = 923). Univariate analysis demonstrated significant differences in 2-year overall survival (OS) (Fav: 67.7%, IM: 64.9% and Adv: 53.9%; p < 0.001); disease-free survival (DFS) (Fav: 57.8%, IM: 55.5% and Adv: 45.3; p < 0.001) and relapse (Fav: 28%, IM: 27.5% and Adv: 37.5%; p < 0.001). Multivariate analysis (MVA) revealed no differences in outcomes between the Fav and IM groups, thus they were combined. On MVA, patients in the Adv risk group had the highest risk of relapse (HR 1.47 p ≤ 0.001) and inferior DFS (HR 1.35 p < 0.001) and OS (HR 1.39 p < 0.001), even using myeloablative conditioning or in those without the pre-HCT measurable-residual disease. Novel approaches to mitigate relapse in this high-risk group are urgently needed.
Assuntos
Transplante de Células-Tronco Hematopoéticas , Leucemia Mieloide Aguda , Transplante de Células-Tronco Hematopoéticas/efeitos adversos , Humanos , Leucemia Mieloide Aguda/genética , Leucemia Mieloide Aguda/terapia , Estudos Retrospectivos , Medição de Risco , Condicionamento Pré-Transplante , Transplante HomólogoRESUMO
Patients who develop therapy-related myeloid neoplasm, either myelodysplastic syndrome (t-MDS) or acute myelogenous leukemia (t-AML), have a poor prognosis. An earlier Center for International Blood and Marrow Transplant Research (CIBMTR) analysis of 868 allogeneic hematopoietic cell transplantations (allo-HCTs) performed between 1990 and 2004 showed a 5-year overall survival (OS) and disease-free survival (DFS) of 22% and 21%, respectively. Modern supportive care, graft-versus-host disease prophylaxis, and reduced-intensity conditioning (RIC) regimens have led to improved outcomes. Therefore, the CIBMTR analyzed 1531 allo-HCTs performed in adults with t-MDS (n = 759) or t-AML (n = 772) between and 2000 and 2014. The median age was 59 years (range, 18 to 74 years) for the patients with t-MDS and 52 years (range, 18 to 77 years) for those with t-AML. Twenty-four percent of patients with t-MDS and 11% of those with t-AML had undergone a previous autologous (auto-) HCT. A myeloablative conditioning (MAC) regimen was used in 49% of patients with t-MDS and 61% of patients with t-AML. Nonrelapse mortality at 5 years was 34% (95% confidence interval [CI], 30% to 37%) for patients with t-MDS and 34% (95% CI, 30% to 37%) for those with t-AML. Relapse rates at 5 years in the 2 groups were 46% (95% CI, 43% to 50%) and 43% (95% CI, 40% to 47%). Five-year OS and DFS were 27% (95% CI, 23% to 31%) and 19% (95% CI, 16% to 23%), respectively, for patients with t-MDS and 25% (95% CI, 22% to 28%) and 23% (95% CI, 20% to 26%), respectively, for those with t-AML. In multivariate analysis, OS and DFS were significantly better in young patients with low-risk t-MDS and those with t-AML undergoing HCT with MAC while in first complete remission, but worse for those with previous auto-HCT, higher-risk cytogenetics or Revised International Prognostic Scoring System score, and a partially matched unrelated donor. Relapse remains the major cause of treatment failure, with little improvement seen over the past 2 decades. These data mandate caution when recommending allo-HCT in these conditions and indicate the need for more effective antineoplastic approaches before and after allo-HCT.
Assuntos
Leucemia Mieloide Aguda , Síndromes Mielodisplásicas , Humanos , Leucemia Mieloide Aguda/terapia , Pessoa de Meia-Idade , Síndromes Mielodisplásicas/terapia , Estudos Retrospectivos , Condicionamento Pré-Transplante , Transplante HomólogoAssuntos
Transplante de Células-Tronco Hematopoéticas , Leucemia Mieloide Aguda , Leucemia-Linfoma Linfoblástico de Células Precursoras , Adulto , Aberrações Cromossômicas , Transplante de Células-Tronco Hematopoéticas/efeitos adversos , Humanos , Leucemia-Linfoma Linfoblástico de Células Precursoras/genética , Leucemia-Linfoma Linfoblástico de Células Precursoras/terapiaRESUMO
Reduced-intensity conditioning (RIC) regimens developed to extend the use of allogeneic hematopoietic stem cell transplantation (HSCT) to older patients have resulted in encouraging outcomes. We aimed to compare the 2 most commonly used RIC regimens, i.v. fludarabine with busulfan (FluBu) and fludarabine with melphalan (FluMel), in patients with myelodysplastic syndrome (MDS). Through the Center for International Blood and Marrow Transplant Research (CIBMTR), we identified 1045 MDS patients age ≥60 years who underwent first HSCT with a matched related or matched (8/8) unrelated donor using an RIC regimen. The CIBMTR's definition of RIC was used: a regimen that incorporated an i.v. busulfan total dose ≤7.2 mg/kg or a low-dose melphalan total dose ≤150 mg/m2. The 2 groups, recipients of FluBu (n = 697) and recipients of FluMel (n = 448), were comparable in terms of disease- and transplantation-related characteristics except for the more frequent use of antithymocyte globulin or alemtuzumab in the FluBu group (39% versus 31%). The median age was 67 years in both groups. FluMel was associated with a reduced relapse incidence (RI) compared with FluBu, with a 1-year adjusted incidence of 26% versus 44% (P ≤ .0001). Transplantation-related mortality (TRM) was higher in the FluMel group (26% versus 16%; P ≤ .0001). Because the magnitude of improvement with FluMel in RI was greater than the improvement in TRM with FluBu, disease-free survival (DFS) was better at 1 year and beyond with FluMel compared with FluBu (48% versus 40% at 1 year [P = .02] and 35% versus 27% at 3 years [P = .01]). Overall survival was comparable in the 2 groups at 1 year (63% versus 61%; P = .4) but was significantly improved with FluMel compared with FluBu at 3 years (46% versus 39%; P = .03). Our results suggest that FluMel is associated with superior DFS compared with FluBu owing to reduced RI in older patients with MDS patients. © 2021 American Society for Transplantation and Cellular Therapy. Published by Elsevier Inc.
Assuntos
Doença Enxerto-Hospedeiro , Síndromes Mielodisplásicas , Idoso , Bussulfano/uso terapêutico , Humanos , Melfalan/uso terapêutico , Pessoa de Meia-Idade , Síndromes Mielodisplásicas/tratamento farmacológico , Análise de Sobrevida , Condicionamento Pré-Transplante , Vidarabina/análogos & derivadosRESUMO
The global coronavirus disease 2019 (COVID-19) pandemic has rapidly increased the demand for facemasks as a measure to reduce the rapid spread of the pathogen. Throughout the pandemic, some countries such as Italy had a monthly demand of ca. 90 million facemasks. Domestic mask manufacturers are capable of manufacturing 8 million masks each week, although the demand was 40 million per week during March 2020. This dramatic increase has contributed to a spike in the generation of facemask waste. Facemasks are often manufactured with synthetic materials that are non-biodegradable, and their increased usage and improper disposal are raising environmental concerns. Consequently, there is a strong interest for developing biodegradable facemasks made with for example, renewable nanofibres. A range of natural polymer-based nanofibres has been studied for their potential to be used in air filter applications. This review article examines potential natural polymer-based nanofibres along with their filtration and antimicrobial capabilities for developing biodegradable facemask that will promote a cleaner production.
RESUMO
Acute myeloid leukemia (AML) patients often undergo allogeneic hematopoietic cell transplantation (alloHCT) in first complete remission (CR). We examined the effect of depth of clinical response, including incomplete count recovery (CRi) and/or measurable residual disease (MRD), in patients from the Center for International Blood and Marrow Transplantation Research (CIBMTR) registry. We identified 2492 adult patients (1799 CR and 693 CRi) who underwent alloHCT between January 1, 2007 and December 31, 2015. The primary outcome was overall survival (OS). Multivariable analysis was performed to adjust for patient-, disease-, and transplant-related factors. Baseline characteristics were similar. Patients in CRi compared to those in CR had an increased likelihood of death (HR: 1.27; 95% confidence interval: 1.13-1.43). Compared to CR, CRi was significantly associated with increased non-relapse mortality (NRM), shorter disease-free survival (DFS), and a trend toward increased relapse. Detectable MRD was associated with shorter OS, shorter DFS, higher NRM, and increased relapse compared to absence of MRD. The deleterious effects of CRi and MRD were independent. In this large CIBMTR cohort, survival outcomes differ among AML patients based on depth of CR and presence of MRD at the time of alloHCT. Further studies should focus on optimizing post-alloHCT outcomes for patients with responses less than CR.