The Effect of Bismuth and Tin on Methane and Acetate Production in a Microbial Electrosynthesis Cell Fed with Carbon Dioxide.

This study investigates the impacts of bismuth and tin on the production of CH4 and volatile fatty acids in a microbial electrosynthesis cell with a continuous CO2 supply. First, the impact of several transition metal ions (Ni2+, Fe2+, Cu2+, Sn2+, Mn2+, MoO42-, and Bi3+) on hydrogenotrophic and acetoclastic methanogenic microbial activity was evaluated in a series of batch bottle tests incubated with anaerobic sludge and a pre-defined concentration of dissolved transition metals. While Cu is considered a promising catalyst for the electrocatalytic conversion of CO2 to short chain fatty acids such as acetate, its presence as a Cu2+ ion was demonstrated to significantly inhibit the microbial production of CH4 and acetate. At the same time, CH4 production increased in the presence of Bi3+ (0.1 g L-1) and remained unchanged at the same concentration of Sn2+. Since Sn is of interest due to its catalytic properties in the electrochemical CO2 conversion, Bi and Sn were added to the cathode compartment of a laboratory-scale microbial electrosynthesis cell (MESC) to achieve an initial concentration of 0.1 g L-1. While an initial increase in CH4 (and acetate for Sn2+) production was observed after the first injection of the metal ions, after the second injection, CH4 production declined. Acetate accumulation was indicative of the reduced activity of acetoclastic methanogens, likely due to the high partial pressure of H2. The modification of a carbon-felt electrode by the electrodeposition of Sn metal on its surface prior to cathode inoculation with anaerobic sludge showed a doubling of CH4 production in the MESC and a lower concentration of acetate, while the electrodeposition of Bi resulted in a decreased CH4 production.

Engineering Fe-N4 Electronic Structure with Adjacent Co-N2C2 and Co Nanoclusters on Carbon Nanotubes for Efficient Oxygen Electrocatalysis.

Regulating the local configuration of atomically dispersed transition-metal atom catalysts is the key to oxygen electrocatalysis performance enhancement. Unlike the previously reported single-atom or dual-atom configurations, we designed a new type of binary-atom catalyst, through engineering Fe-N4 electronic structure with adjacent Co-N2C2 and nitrogen-coordinated Co nanoclusters, as oxygen electrocatalysts. The resultant optimized electronic structure of the Fe-N4 active center favors the binding capability of intermediates and enhances oxygen reduction reaction (ORR) activity in both alkaline and acid conditions. In addition, anchoring M-N-C atomic sites on highly graphitized carbon supports guarantees of efficient charge- and mass-transports, and escorts the high bifunctional catalytic activity of the entire catalyst. Further, through the combination of electrochemical studies and in-situ X-ray absorption spectroscopy analyses, the ORR degradation mechanisms under highly oxidative conditions during oxygen evolution reaction processes were revealed. This work developed a new binary-atom catalyst and systematically investigates the effect of highly oxidative environments on ORR electrochemical behavior. It demonstrates the strategy for facilitating oxygen electrocatalytic activity and stability of the atomically dispersed M-N-C catalysts.

Research Progress on Graphite-Derived Materials for Electrocatalysis in Energy Conversion and Storage.

High-performance electrocatalysts are critical to support emerging electrochemical energy storage and conversion technologies. Graphite-derived materials, including fullerenes, carbon nanotubes, and graphene, have been recognized as promising electrocatalysts and electrocatalyst supports for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and carbon dioxide reduction reaction (CO2RR). Effective modification/functionalization of graphite-derived materials can promote higher electrocatalytic activity, stability, and durability. In this review, the mechanisms and evaluation parameters for the above-outlined electrochemical reactions are introduced first. Then, we emphasize the preparation methods for graphite-derived materials and modification strategies. We further highlight the importance of the structural changes of modified graphite-derived materials on electrocatalytic activity and stability. Finally, future directions and perspectives towards new and better graphite-derived materials are presented.

Evaluation of biocathode materials for microbial electrosynthesis of methane and acetate.

This study compares carbon felt (CF), granular activated carbon (GAC), and a conductive acrylonitrile butadiene styrene (cABS) polymer cathodes for CH4 and acetate production in a microbial electrosynthesis (MES) cell. At an applied voltage of 2.8 V and continuous CO2 flow, the CF biocathode MES cell showed the highest CH4 production rate of 1420 ± 225 mL Vc-1 d-1 (Vc = cathode volume), also producing acetate at a rate of 710 ± 110 mg Vc-1 d-1. The volumetric rates of acetate and CH4 production decreased when using the GAC cathode (720 ± 94 mL Vc-1 d-1 and 236 ± 65 mg Vc-1 d-1, respectively). When the cABS cathode was used, the CH4 production declined to 250 ± 35 mL Vc-1 d-1, while the acetate production increased to 1105 ± 130 mg Vc-1 d-1. The biocatalytic activity of cABS increased after in-situ electrodeposition of Ni and Fe, resulting in a current increase from 205 mA to 380 mA accompanied by increasing acetate and ethanol production (1405 mg Vc-1 d-1 and 240 mg Vc-1 d-1, respectively), while the CH4 production decreased. The cABS cathode showed the highest specific (per surface area) activity for acetate and CH4 production.

Part I: NiMoO4 Nanostructures Synthesized by the Solution Combustion Method: A Parametric Study on the Influence of Synthesis Parameters on the Materials' Physicochemical, Structural, and Morphological Properties.

The impact of process conditions on the synthesis of NiMoO4 nanostructures using a solution combustion synthesis (SCS) method, in which agar powder and Ni(NO3)2 were utilized as fuel and as the oxidant, respectively, was thoroughly studied. The results show that the calcination temperature had a significant implication on the specific surface area, phase composition, particle size, band gap, and crystallite size. The influence of calcination time on the resulting physicochemical/structural/morphological properties of NiMoO4 nanostructures was found to be a major effect during the first 20 min, beyond which these properties varied to a lesser extent. The increase in the Ni/Mo atomic ratio in the oxide impacted the combustion dynamics of the system, which led to the formation of higher surface area materials, with the prevalence of the ß-phase in Ni-rich samples. Likewise, the change in the pH of the precursor solution showed that the combustion reaction is more intense in the high-pH region, entailing major implications on the physicochemical properties and phase composition of the samples. The change in the fuel content showed that the presence of agar is important, as it endows the sample with a fluffy, porous texture and is also vital for the preponderance of the ß-phase.

Part II: NiMoO4 Nanostructures Synthesized by the Solution Combustion Method: A Parametric Study on the Influence of Material Synthesis and Electrode-Fabrication Parameters on the Electrocatalytic Activity in the Hydrogen Evolution Reaction.

Earth-abundant NiMo-oxide nanostructures were investigated as efficient electrocatalytic materials for the hydrogen evolution reaction (HER) in acidic media. Synthesis and non-synthesis parameters were thoroughly studied. For the non-synthesis parameters, the variation in Nafion loading resulted in a volcano-like trend, while the change in the electrocatalyst loading showed that the marginal benefit of high loadings attenuates due to mass-transfer limitations. The addition of carbon black to the electrocatalyst layer improved the HER performance at low loadings. Different carbon black grades showed a varying influence on the HER performance. Regarding the synthesis parameters, a calcination temperature of 500 °C, a calcination time between 20 and 720 min, a stoichiometric composition (Ni/Mo = 1), an acidic precursor solution, and a fuel-lean system were conditions that yielded the highest HER activity. The in-house NiMoO4/CB/Nafion electrocatalyst layer was found to offer a better long-term performance than the commercial Pt/C.

Electrochemical disinfection of bacteria-laden water using antimony-doped tin-tungsten-oxide electrodes.

Electrochemical disinfection has been shown to be an efficient method with a shortrequired contact time for treatment of drinking water supplies, industrial raw water supplies, liquid foodstuffs, and wastewater effluents. In the present work, the electrochemical disinfection of saline water contaminated with bacteria was investigated in chloride-containing solutions using Sb-doped Sn80%-W20%-oxide anodes. The influence of current density, bacterial load, initial chloride concentration, solution pH, and the type of bacteria (E. coli D21, E. coli O157:H7, and E. faecalis) on disinfection efficacy was systematically examined. The impact of natural organic matter and a radical scavenger on the disinfection process was also examined. The electrochemical system was highly effective in bacterial inactivation for a 0.1 M NaCl solution contaminated with ∼107 CFU/mL bacteria by applying a current density ≥1 mA/cm2 through the cell.100% inactivation of E. coli D21 was achieved with a contact time of less than 60 s and power consumption of 48 Wh/m3, by applying a current density of 6 mA/cm2 in a 0.1 M NaCl solution contaminated with ∼107 CFU/mL. Reactive chlorine species as well as reactive oxygen species (e.g. hydroxyl radicals) generated in situ during the electrochemical process were determined to be responsible for inactivation of bacteria.

Investigating electrochemical removal of bacterial biofilms from stainless steel substrates.

Electrochemical removal of biofilms deserves attention because of its ease of use and environmentally friendly nature. We investigated the influence of electrode potential and treatment time on the removal of a 10-day old Pseudomonas aeruginosa biofilm formed on stainless steel 316 L substrates. At electrode potentials more positive than -1.5 V vs. Ag/AgCl, lower removal rates were observed and only partial removal of the biofilm was achieved during a 1-min time interval. Electrostatic repulsion between the film and electrode surface is believed to drive biofilm detachment under these conditions. However, when the biofilm-coated substrates were treated at potentials negative of -1.5 V vs. Ag/AgCl, complete removal of a biofilm was achieved within seconds. Under these conditions, vigorous evolution of hydrogen gas is believed to be responsible for the film removal, mechanically detaching the bacteria and extracellular polymeric matrix from the substrate. Stainless steel substrates were also subjected to repeated cycles of biofilm formation and electrochemical removal. High removal efficiencies were maintained throughout this process suggesting the potential of the proposed technology for application on conductive surfaces in various industrial settings.

A comparative PM-IRRAS and ellipsometry study of the adsorptive behaviour of bovine serum albumin on a gold surface.

Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) and ellipsometry were used ex situ to investigate adsorption of bovine serum albumin (BSA) on a gold surface, in terms of the adsorption equilibrium and kinetics. The aim of the work was to examine if the two different techniques give similar/complementary results under the same experimental conditions employing the same protein/surface system, and thus validate the use of the techniques for the investigation of protein/surface interactions under the applied experimental conditions, in general. It was found that the adsorption of BSA on gold follows Type I isotherm, which can be described by the Freundlich isotherm. The initial BSA adsorption kinetics was found to be very fast, and the results were modelled using a two-step kinetic model. The first step represents reversible BSA adsorption that yields BSA adsorbed in a native configuration (θ1) that is not thermodynamically stable. The second step represents the irreversible transformation of this protein configuration into a thermodynamically stable surface-adsorbed configuration (θ2). It was found that the θ2/θ1 ratio increased with time. Finally, the comparison of the results obtained by the two techniques showed a very good agreement.

An electrochemical method for functionalization of a 316L stainless steel surface being used as a stent in coronary surgery: irreversible immobilization of fibronectin for the enhancement of endothelial cell attachment.

An electrochemistry-based method for the formation of functionalized alkanethiol layers on a 316L stainless steel surface was developed. The method was efficient in forming a very stable, irreversibly-attached COOH-terminated (mercaptoundecanoic acid) surface layer. This layer was used as a 'linker' to immobilize the extracellular matrix protein fibronectin to the 316L stainless steel surface. Fibronectin was irreversibly attached to the surface and, unlike physisorbed fibronectin, resisted detachment more in aggressive 0.1 M NaOH under sonication. The fibronectin-modified 316L stainless steel surface was more biocompatible towards attachment of endothelial cells than a bare (unmodified) 316L stainless steel surface, yielding a 25% improvement in cell density.

Enhancement of structural and charge-transfer barrier properties of n-alkanethiol layers on a polycrystalline copper surface by electrochemical potentiodynamic polarization.

A method that significantly improves the charge-transfer barrier properties of self-assembled n-alkanethiol films on polycrystalline copper is presented in this paper. Chemically-formed films were further modified electrochemically by repetitive potentiodynamic cycling in ethanolic solutions containing small quantities of n-alkanethiols. The polarization modulation infrared reflection absorption spectra (PM-IRRAS) of the electrochemically-modified thiol films showed an increase in their surface packing density and structure order in comparison to those which were chemically formed. The electrochemical impedance spectra (EIS) revealed that the ability of these films to maintain barrier properties upon exposure to corrosive environments depends directly on their chemical and structural properties, which also influenced the wettability of the surface. Electrochemically-modified thiol films offer superior charge-transfer barrier properties over chemically-formed films.

The response of fibrinogen, platelets, endothelial and smooth muscle cells to an electrochemically modified SS316LS surface: towards the enhanced biocompatibility of coronary stents.

Modification of a biomedical-grade stainless steel 316LS surface by electrochemical cyclic potentiodynamic passivation (CPP) and the response of fibrinogen (Fg), platelets, endothelial cells (ECs) and smooth muscles cells (SMCs) to this surface was investigated. Polarization modulation infrared reflection absorption spectroscopy revealed a significant difference between the secondary structure of Fg adsorbed on the unmodified and CPP surface, the latter being closer to that of native Fg. This was postulated as the origin of the significantly lower surface density of attached platelets on the CPP surface. The competitive interaction of ECs and SMCs with the surface showed that the ECs/SMCs surface density ratio is significantly higher on the CPP surface over the first 2h of attachment, suggesting faster initial attachment kinetics of ECs on the CPP surface. The presented results thus clearly demonstrate an increase in biocompatibility of the CPP 316LS surface.

The positive influence of electrochemical cyclic potentiodynamic passivation (CPP) of a SS316LS surface on its response to fibronectin and pre-osteoblasts.

The influence of an electrochemical surface passivation technique (cyclic potentiodynamic polarization, CPP) on the physico-chemical surface properties of SS316LS and its subsequent response to fibronectin (Fn) and pre-osteoblasts were investigated. Contact angle and zeta-potential measurements showed that the CPP-modified surface is more hydrophilic and more positively charged than the unmodified surface. Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was used to investigate the interaction of Fn with both surfaces. The saturated surface concentration of adsorbed Fn was higher on the CPP-modified surface. As well, significant changes were identified in the secondary structure of Fn adsorbed on both surfaces, in comparison to its native state. This data also indicated a higher degree of Fn unfolding on the CPP-modified surface. Cell studies indicated that the attachment, proliferation and morphology of pre-osteoblasts were significantly improved on the CPP-modified surface, which was attributed to the more open conformation of Fn on the CPP-modified surface. Thus, the CPP surface passivation method was demonstrated to yield a SS316LS surface of enhanced biocompatibility.

Nickel-based 3D electrocatalyst layers for production of hydrogen by water electrolysis in an acidic medium.

Electrocatalytic activity of three-dimensional nickel-based layers in the hydrogen evolution reaction (HER) was investigated in an acidic medium. It was demonstrated that patterning of a glassy carbon electrode substrate with a 3D polyaniline (PANI) matrix is a convenient way of increasing the electrocatalytically active surface area of electrodeposited Ni, and hence its apparent electrocatalytic activity. The optimized PANI/Ni electrocatalyst layer showed a significantly higher activity in the HER then a two-dimensional control Ni-plate surface. It was also demonstrated that it is possible to produce a Ni-based HER electrocatalyst layer by synthesizing Ni nanoparticles and supporting them on Vulcan carbon. This electrocatalyst also offered a significantly higher electrocatalytic activity in the HER then the control surface, but lower then the optimized PANI/Ni electrocatalyst. The electrocatalytic activity of the optimized PANI/Ni layer was also compared to the activity of a 3D catalyst produced by coating a porous RVC cube substrate with Ni. This electrocatalyst showed the highest HER electrocatalytic activity among the investigated layers when tested under potentiodynamic polarization conditions. However, under the potentiostatic conditions, the optimized PANI/Ni layer showed the highest electrocatalytic activity.

Electrochemical investigations of the interaction of C-reactive protein (CRP) with a CRP antibody chemically immobilized on a gold surface.

A possibility of using a range of dc and ac electrochemical techniques to probe associative interactions of C-reactive protein (CRP) with CRP antibody (aCRP) immobilized on a gold electrode surface was investigated. It was demonstrated that the investigated electrochemical techniques can be used efficiently to probe these interactions over a wide CRP concentration range, from 1.15 x 10(-5) to 1.15 mg L(-1). The measured sensitivity of the techniques is in the following decreasing order: differential pulse voltammetry, charge-transfer resistance obtained from electrochemical impedance spectroscopy (EIS), cyclic voltammetry, chronoamperometry, and double-layer capacitance deduced from EIS measurements which gave the poorest sensitivity. Measurements of kinetic parameters demonstrated that the associative interactions of CRP with the immobilized aCRP reached quasi-equilibrium after 20-30 min. The kinetics of these interactions was modeled successfully using a two-step kinetic model. In this model, the first step represents reversible CRP-aCRP associative-dissociative interactions, while the second step represents the irreversible transformation of the bound CRP into a thermodynamically stable configuration. It was demonstrated that the thermodynamically stable configuration of CRP starts prevailing after 7 min of interaction of CRP with the immobilized aCRP.

Enhancement of biocompatibility of 316LVM stainless steel by cyclic potentiodynamic passivation.

Passivation of stainless steel implants is a common procedure used to increase their biocompatibility. The results presented in this work demonstrate that the electrochemical cyclic potentiodynamic polarization (CPP) of a biomedical grade 316LVM stainless steel surface is a very efficient passivation method that can be used to significantly improve the material's general corrosion resistance and thus its biocompatibility. The influence of a range of experimental parameters on the passivation/corrosion protection efficiency is discussed. The passive film formed on a 316LVM surface by using the CPP method offers a significantly higher general corrosion resistance than the naturally grown passive film. The corresponding relative corrosion protection efficiency measured in saline during a 2-month period was 97% +/- 1%, which demonstrates a very high stability of the CPP-formed passive film. Its high corrosion protection efficiency was confirmed also at temperatures and chloride concentrations well above normal physiological levels. It was also shown that the CPP is a significantly more effective passivation method than some other surface-treatment methods commonly used to passivate biomedical grade stainless steels. In addition, the CPP-passivated 316LVM surface showed an enhanced biocompatibility in terms of preosteoblast (MC3T3) cells attachment. An increased thickness of the CPP-formed passive film and its enrichment with Cr(VI) and oxygen was determined to be the origin of the material's increased general corrosion resistance, whereas the increased surface roughness and surface (Volta) potential were suggested to be the origin of the enhanced preosteoblast cells attachment.

Interaction of flavin adenine dinucleotide (FAD) with a glassy carbon electrode surface.

The interaction of flavin adenine dinucleotide (FAD) with a glassy carbon electrode (GCE) surface was investigated in terms of the FAD adsorption thermodynamics and kinetics, the subsequent electroreduction mechanism, and the corresponding electron-transfer rate. The kinetics of FAD electroreduction at the GCE was found to be an adsorption-controlled process. A set of electroreduction kinetic parameters was calculated: the true number of electrons involved in the FAD reduction, n=1.76, the apparent transfer coefficient, alpha(app)=0.41, and the apparent heterogeneous electron-transfer rate constant, k(app)=1.4 s(-1). The deviation of the number of exchanged electrons from the theoretical value for the complete reduction of FAD to FADH(2) (n=2) indicates that a small portion of FAD goes to a semiquinone state during the redox process. The FAD adsorption was well described by the Langmuir adsorption isotherm. The large negative apparent Gibbs energy of adsorption (DeltaG(ads)=-39.7 +/-0.4 kJ mol(-1)) indicated a highly spontaneous and strong adsorption of FAD on the GCE. The energetics of the adsorption process was found to be independent of the electrode surface charge in the electrochemical double-layer region. The kinetics of FAD adsorption was modeled using a pseudo-first-order kinetic model.

Adsorption of fibrinogen on a biomedical-grade stainless steel 316LVM surface: a PM-IRRAS study of the adsorption thermodynamics, kinetics and secondary structure changes.

Polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS) was employed to investigate the interaction of serum protein fibrinogen with a biomedical-grade 316LVM stainless steel surface, in terms of the adsorption thermodynamics, kinetics and secondary structure changes of the protein. Apparent Gibbs energy of adsorption values indicated a highly spontaneous and strong adsorption of fibrinogen onto the surface. The kinetics of fibrinogen adsorption were successfully modeled using a pseudo first-order kinetic model. Deconvolution of the amide I bands indicated that the adsorption of fibrinogen on 316LVM results in significant changes in the protein's secondary structure that occur predominantly within the first minute of adsorption. Among the investigated structures, the alpha-helix structure undergoes the smallest changes, while the beta-sheet and beta-turns structures undergo significant changes. It was shown that lateral interactions between the adsorbed molecules do not play a role in controlling the secondary structure changes. An increase in temperature induced changes in the secondary structure of the protein, characterized by a loss of the alpha-helical content and its transformation into the beta-turns structure.

PM-IRRAS investigation of the interaction of serum albumin and fibrinogen with a biomedical-grade stainless steel 316LVM surface.

Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was applied to investigate the interaction of bovine serum albumin (BSA) and fibrinogen with a biomedical-grade 316LVM stainless steel surface, in terms of the adsorption thermodynamics and adsorption-induced secondary structure changes of the proteins. Highly negative apparent Gibbs energy of adsorption values revealed a spontaneous adsorption of both proteins onto the surface, accompanied by significant changes in their secondary structure. It was determined that, at saturated surface coverages, lateral interactions between the adsorbed BSA molecules induced rather extensive secondary structure changes. Fibrinogen's two coiled coils appeared to undergo negligible secondary structure changes upon adsorption of the protein, while large structural rearrangements of the protein's globular domains occurred upon adsorption. The secondary structure of adsorbed fibrinogen was not influenced by lateral interactions between the adsorbed fibrinogen molecules. PM-IRRAS was deemed to be viable for investigating protein adsorption and for obtaining information on adsorption-induced changes in their secondary structures.

Interactive adsorption behavior of NAD+ at a gold electrode surface.

The adsorption of an oxidized form of nicotinamide adenine dinucleotide, NAD+, on a polycrystalline gold electrode surface and the subsequent surface conformation of the molecule were investigated over a wide temperature and potential range, using electrochemical differential capacitance and PM-IRRAS techniques. The adsorption process was described by the Langmuir adsorption isotherm. The corresponding thermodynamic parameters were determined: the Gibbs energy, enthalpy, and entropy of adsorption. The large negative Gibbs energy of adsorption (-43 +/- 4 kJ mol-1 and -39 +/- 2 kJ mol-1 on a positively and negatively charged surface, respectively) confirms that the NAD+ adsorption process is highly spontaneous, while the large entropy gain (285 J K-1 mol-1 and 127 J K-1 mol-1 on a positively and negatively charged surface, respectively) was found to represent the adsorption driving force. It was demonstrated that the energetics of the adsorption process is surface-charge controlled, while its kinetics is both mass-transport and surface-charge controlled. A surface-charge dependent conformation model for the adsorbed NAD+ molecule is proposed. These findings suggest that the origin of the NAD+ reduction overpotential is related to the surface conformation of the adsorbed NAD+ molecule, rather than to the electrode Fermi level position.