Reticular Imine-linked Coordination Polymers Based on Paddlewheel Diruthenium/Dirhodium Nodes: Synthesis and Metal-site Dependent Photocatalytic Reduction of CO2.

The paddlewheel-type dimetal core ([M2]) is a ubiquitous motif in the nodes in coordination polymers (CPs) and metal-organic frameworks (MOFs). However, their preparation has relied on ligand-substitution-labile metal ions owing to challenges associated with crystallization. Consequently, examples featuring ligand-substitution-inert metal ions, such as Ru or Rh, are scarce. This study presents the synthesis of novel reticular imine-linked CPs incorporating the paddlewheel-type diruthenium(II, II) ([Ru2II,II]; 1-Ru) or dirhodium(II, II) ([Rh2II,II]; 1-Rh) subunits. The synthetic approach involved a Schiff base dehydration condensation reaction between p-formylbenzoate-bridged [Ru2II,II] or [Rh2II,II] precursors (i.e., CHO-Ru and CHO-Rh, respectively) and 2,5-dimethyl-1,4-phenylenediamine in a 1:2 ratio. The catalytic activities of 1-Ru and 1-Rh for the photochemical reduction of CO2 in a heterogeneous system depended on the metal site. The 1-Rusystem exhibited exceptional selectivity, generating 3.0 ´ 104 mmol g-1 of CO after 24 h of irradiation, whereas the 1-Rhsystem generated a lower amount of CO (3.2 ´ 103 mmol g-1). The catalytic activity of 1-Ru ranked with that of all relevant catalytic systems. This study paves the way for the exploration of [Ru2II,II]- or [Rh2II,II]-based polymers with open metal site-dependent functional properties.

Mechanisms of chemical-reaction-induced tensile deformation of an Fe/Ni/Cr alloy revealed by reactive atomistic simulations.

High entropy alloys (HEAs) have demonstrated excellent potential in various applications owing to the unique properties. One of the most critical issues of HEAs is the stress corrosion cracking (SCC) which limits its reliability in practical applications. However, the SCC mechanisms have not been fully understood yet because of the difficulty of experimental measuring of atomic-scale deformation mechanisms and surface reactions. In this work, we conduct atomistic uniaxial tensile simulations using an FCC-type Fe40Ni40Cr20 alloy as a typical simplification of normal HEAs, in order to reveal how a corrosive environment such as high-temperature/pressure water affects the tensile behaviors and deformation mechanisms. In a vacuum, we observe the generation of layered HCP phases in an FCC matrix during tensile simulation induced by the formation of Shockley partial dislocations from surface and grain boundaries. While, in the corrosive environment of high-temperature/pressure water, the alloy surface is oxidized by chemical reactions with water and this oxide surface layer can suppress the formation of Shockley partial dislocation as well as the resulting FCC-to-HCP phase transition; instead, a BCC phase is preferred to generate in the FCC matrix for releasing the tensile stress and stored elastic energy, leading to a reduced ductility as the BCC phase is typically more brittle than the FCC and HCP. Overall, the deformation mechanism of the FeNiCr alloy is changed by the presence of a high-temperature/pressure water environment-from FCC-to-HCP phase transition in vacuum to FCC-to-BCC phase transition in water. This theoretical fundamental study may contribute to the further improvement of HEAs with high resistance to SCC in experiments.

Atom-by-Atom and Sheet-by-Sheet Chemical Mechanical Polishing of Diamond Assisted by OH Radicals: A Tight-Binding Quantum Chemical Molecular Dynamics Simulation Study.

Ultraflat and damage-free single-crystal diamond is a promising material for use in electronic devices such as field-effect transistors. Diamond surfaces are conventionally prepared by the chemical mechanical polishing (CMP) method, although the CMP efficiency remains a critical issue owing to the extremely high hardness of diamond. Recently, OH radicals have been demonstrated to be potentially useful for improving the CMP efficiency for diamond; however, the underlying mechanisms are still elusive. In this work, we applied our previously developed CMP-specialized tight-binding quantum chemical molecular dynamics simulator to comprehensively elucidate the CMP mechanisms of diamond assisted by OH radicals. Our simulation results indicate that the diamond surface is oxidized by reactions with OH radicals and then a concomitant surface reconstruction takes place due to the distorted and unstable nature of the oxidized diamond surface structure. Furthermore, we interestingly reveal that the reconstruction of the diamond surface ultimately leads to two distinct removal mechanisms: (i) gradual atom-by-atom removal through the desorption of gaseous molecules (e.g., CO2 and H2CO3) and (ii) drastic sheet-by-sheet removal through the exfoliation of graphitic ring structures. Hence, we propose that promoting the oxidation-induced graphitization of the diamond surface may provide a route to further improving the CMP efficiency.

Role of OH Termination in Mitigating Friction of Diamond-like Carbon under High Load: A Joint Simulation and Experimental Study.

Diamond-like carbon (DLC) has recently attracted much attention as a promising solid-state lubricant because it exhibits low friction, low abrasion, and high wear resistance. Although we previously reported the reason why H-terminated DLC exhibits low friction based on a tight-binding quantum chemical molecular dynamics (TB-QCMD) simulation, experimentally, the low-friction state of H-terminated DLC is not stable, limiting its application. In the present work, our TB-QCMD simulations suggest that H/OH-terminated DLC could give low friction even under high loads, whereas H-terminated DLC could not. By using gas-phase friction experiments, we confirm that OH termination can indeed provide much more stable lubricity than H termination, validating the predictions from simulations. We conclude that H/OH-terminated DLC is a new low-friction material with high load capacity and high stable lubricity that may be suitable for practical use in industrial applications.

Cooperative roles of chemical reactions and mechanical friction in chemical mechanical polishing of gallium nitride assisted by OH radicals: tight-binding quantum chemical molecular dynamics simulations.

Chemical mechanical polishing (CMP) is a key manufacturing process for applying gallium nitride (GaN), especially the Ga-face GaN, to semiconductor devices such as laser diodes. However, the CMP efficiency for GaN is very low due to its high hardness and chemical stability. Experimentally, OH radicals appear able to improve the CMP efficiency of GaN polished by a SiO2 abrasive grain, whereas the mechanisms of the OH-radical-assisted CMP process remain unclear because experimental elucidation of the complex chemical reactions occurring among GaN substrate, abrasive grain, and OH radicals is difficult. In this work, we used our previously developed tight-binding quantum chemical molecular dynamics simulator to study the OH-radical-assisted CMP process of the widely employed Ga-face GaN substrate polished by an amorphous SiO2 abrasive grain in an effort to understand how OH radicals assist the CMP process and then aid the development of next-generation CMP techniques. Our simulations revealed that the OH-radical-assisted CMP process of GaN occurs via the following three basic reaction steps: (i) first, all hydrogen terminations on the GaN surface are replaced by OH terminations through continuous reactions with OH radicals; (ii) after the substrate is fully terminated by OH, the hydrogen atoms of these OH terminations are removed by reacting with newly added OH radicals, which forms H2O molecules and leaves energetic oxygen atoms with dangling bonds on the surface; and (iii) finally, these energetic oxygen atoms intrude inside the substrate with concomitant dissociation of Ga-N bonds and the generation of N2 and gallium hydroxide molecules, which accumulatively lead to the removal of N and Ga atoms from the substrate.

Non-Empirical Law for Nanoscale Atom-by-Atom Wear.

Wear of contact materials results in energy loss and device failure. Conventionally, wear is described by empirical laws such as the Archard's law; however, the fundamental physical and chemical origins of the empirical law have long been elusive, and moreover empirical wear laws do not always hold for nanoscale contact, collaboratively hindering the development of high-durable tribosystems. Here, a non-empirical and robustly applicable wear law for nanoscale contact situations is proposed. The proposed wear law successfully unveils why the nanoscale wear behaviors do not obey the description by Archard's law in all cases although still obey it in certain experiments. The robustness and applicability of the proposed wear law is validated by atomistic simulations. This work affords a way to calculate wear at nanoscale contact robustly and theoretically, and will contribute to developing design principles for wear reduction.

Trajectory on-the-fly molecular dynamics approach to tunneling splitting in the electronic excited state: A case of tropolone.

The semiclassical tunneling method is applied to evaluate the tunneling splitting of tropolone due to the intramolecular proton transfer in the electronic excited state, first time, in a framework of the trajectory on-the-fly molecular dynamics (TOF-MD) approach. To prevent unphysical zero-point vibrational energy transfer among the normal modes of vibration, quantum zero-point vibrational energies are assigned only to the vibrational modes related to intramolecular proton transfer, whereas the remaining modes are treated as bath modes. Practical ways to determine the tunnel-initiating points and tunneling path are introduced. It is shown that the tunneling splitting decreases as the bath-mode energy increases. The experimental tunneling splitting value is well reproduced by the present TOF-MD approach based on the Wentzel-Kramers-Brillouin (WKB) approximation.

Triboemission of hydrocarbon molecules from diamond-like carbon friction interface induces atomic-scale wear.

Understanding atomic-scale wear is crucial to avoid device failure. Atomic-scale wear differs from macroscale wear because chemical reactions and interactions at the friction interface are dominant in atomic-scale tribological behaviors, instead of macroscale properties, such as material strength and hardness. It is particularly challenging to reveal interfacial reactions and atomic-scale wear mechanisms. Here, our operando friction experiments with hydrogenated diamond-like carbon (DLC) in vacuum demonstrate the triboemission of various hydrocarbon molecules from the DLC friction interface, indicating its atomic-scale chemical wear. Furthermore, our reactive molecular dynamics simulations reveal that this triboemission of hydrocarbon molecules induces the atomic-scale mechanical wear of DLC. As the hydrogen concentration in hydrogenated DLC increases, the chemical wear increases while mechanical wear decreases, indicating an opposite effect of hydrogen concentration on chemical and mechanical wear. Consequently, the total wear shows a concave hydrogen concentration dependence, with an optimal hydrogen concentration for wear reduction of around 20%.

Tight-Binding Quantum Chemical Molecular Dynamics Study on the Friction and Wear Processes of Diamond-Like Carbon Coatings: Effect of Tensile Stress.

Diamond-like carbon (DLC) coatings have attracted much attention as an excellent solid lubricant due to their low-friction properties. However, wear is still a problem for the durability of DLC coatings. Tensile stress on the surface of DLC coatings has an important effect on the wear behavior during friction. To improve the tribological properties of DLC coatings, we investigate the friction process and wear mechanism under various tensile stresses by using our tight-binding quantum chemical molecular dynamics method. We observe the formation of C-C bonds between two DLC substrates under high tensile stress during friction, leading to a high friction coefficient. Furthermore, under high tensile stress, C-C bond dissociation in the DLC substrates is observed during friction, indicating the atomic-level wear. These dissociations of C-C bonds are caused by the transfer of surface hydrogen atoms during friction. This work provides atomic-scale insights into the friction process and the wear mechanism of DLC coatings during friction under tensile stress.

A Study on Electrolytic Corrosion of Boron-Doped Diamond Electrodes when Decomposing Organic Compounds.

Electrolytic corrosion of boron-doped diamond (BDD) electrodes after applying a high positive potential to decompose organic compounds in aqueous solution was studied. Scanning electron microscopy images, Raman spectra, and glow discharge optical emission spectroscopy revealed that relatively highly boron-doped domains were primarily corroded and relatively low boron-doped domains remained after electrolysis. The corrosion due to electrolysis was observed especially in aqueous solutions of acetic acid or propionic acid, while it was not observed in other organic compounds such as formic acid, glucose, and methanol. Electron spin resonance measurements after electrolysis in the acetic acid solution revealed the generation of methyl radicals on the BDD electrodes. Here, the possible mechanisms for the corrosion are discussed. Dangling bonds may be formed due to abstraction of OH groups from C-OH functional groups by methyl radicals generated on the surface of the BDD electrodes. As a result, the sp3 diamond structure would be converted to the sp2 carbon structure, which can be easily etched. Furthermore, to prevent electrolytic corrosion during electrolysis, both the current density and the pH condition in the aqueous solution were optimized. At low current densities or high pH, the BDD electrodes were stable without electrolytic corrosion even in the acetic acid aqueous solution.

Theoretical investigation of enantioselectivity of cage-like supramolecular assembly: the insights into the shape complementarity and host-guest interaction.

Enantioselectivity in the aza-Cope rearrangement of a guest molecule encapsulated in a cage-like supramolecular assembly [Ga4 L6 ](12-) [L = 1,5-bis(2',3'-dihydroxybenzamido)naphthalene] is investigated using density functional theory and ab initio molecular orbital calculations. Reaction pathways leading to R- and S-enantiomers encapsulated in the [Ga4 L6 ](12-) are explored. The reaction barriers and the stabilities of the prochiral structures differed in the [Ga4 L6 ](12-) , resulting that the product with an R structure is favorably produced in the Δ-structure [Ga4 L6 ](12-) . The large energy difference in the prochiral structures in the [Ga4 L6 ](12-) was attributed to the deformation of the bulky substituent. The host-guest interaction energy raises the reaction barrier for the product with an S structure. The previous study suggested that the different stability of the prochiral substrates in the assembly was the origin of the enantioselectivity, and the suggestion is supported by our computational finding. In addition, our results show that the difference in the reaction barriers also importantly contributes to the enantioselectivity.

Ab initio molecular dynamics approach to tunneling splitting in polyatomic molecules.

An ab initio molecular dynamics approach is combined with the semiclassical tunneling method of Makri and Miller, which is applied to estimations of tunneling splitting in the umbrella inversion of ammonia and the intramolecular hydrogen transfer in malonaldehyde. In the application to malonaldehyde, effects of multidimensionality are examined by assigning quantum zero-point energies only to significant vibrational modes and changing the amount of energy given to other degrees of freedom. The calculated tunneling splitting values are in good agreement with the corresponding experimental values for both molecules.

Ab initio molecular dynamics simulation of photoisomerization in azobenzene in the n pi* state.

Photoisomerization mechanism of azobenzene in the lowest excited state S(1)(n pi(*)) is investigated by ab initio molecular dynamics (AIMD) simulation with the RATTLE algorithm, based on the state-averaged complete active space self-consistent field method. AIMD simulations show that cis to trans isomerization occurs via two-step rotation mechanism, accompanying rotations of the central NN part and two phenyl rings, and this process can be classified into two types, namely, clockwise and counterclockwise rotation pathways. On the other hand, trans to cis isomerization occurs via conventional rotation pathway where two phenyl rings rotate around the NN bond. The quantum yields are calculated to be 0.45 and 0.28+/-0.14 for cis to trans and trans to cis photoisomerizations, respectively, which are in very good agreement with the corresponding experimental results.