RESUMO
To elucidate the correlation between dye solubilization into micelles and their core-shell aggregated structure, the structures of block and random copolymer micelles were characterized. The block copolymer micelles exhibited a higher dye solubilization capacity which correlated with their core volume, clear core-shell contrast and slow solubilization rate.
RESUMO
Hydrogel-based wound dressings have been developed for rapid wound healing; however, their adhesive properties have not been adequately investigated. Excessive adhesion to the skin causes wound expansion and pain when hydrogels absorb exudates and swell at wound sites. Herein, we developed a low-adhesion and low-swelling hydrogel dressing using alginate, which is non-adhesive to cells and skin tissue, CaCO3, and carbonated water. The alginate/CaCO3 solution rapidly formed a hydrogel upon the addition of carbonated water, and the CO2 in the hydrogel diffused into the atmosphere, preventing acidification and obtaining a pH value suitable for wound healing. Remarkably, the skin adhesion and swelling of the hydrogel were 11.9- to 16.5-fold and 1.9-fold lower, respectively, than those of clinical low-adhesion hydrogel dressings. In vivo wound-healing tests in mice demonstrated its therapeutic efficacy, and the prepared hydrogel prevented temporary wound dilation during early healing. These results illustrate the importance of controlling skin adhesion and swelling in wound dressings and demonstrate the potential clinical applications of this wound-friendly hydrogel dressing.
Assuntos
Água Carbonatada , Camundongos , Animais , Hidrogéis/farmacologia , Hidrogéis/química , Alginatos/farmacologia , Alginatos/química , Dilatação , Pele/patologia , Aderências Teciduais/patologia , Adesivos , Antibacterianos/químicaRESUMO
The realization that soluble factors secreted by heterotypic cells play an importanta role in paracrine signaling, which facilitates intercellular communication, enabled the development of physiologically relevant co-culture models for drug screening and the engineering of tissues, such as hepatic tissues. The most crucial issues confronting the use of conventional membrane inserts in segregated co-culture models that are used to study paracrine signaling between heterotypic cells have been identified as long-term viability and retention of cell-specific functions, especially when isolated primary cells are used. Herein, we present an in vitro segregated co-culture model consisting of a well plate incubated with rat primary hepatocytes and normal human dermal fibroblasts which were segregated using a membrane insert with silica nonwoven fabric (SNF) on it. SNF, which mimics a physiological environment much more effectively than a two-dimensional (2D) one, promotes cell differentiation and resultant paracrine signaling in a manner that is not possible in a conventional 2D culture, owing to high mechanical strength generated by its inorganic materials and interconnected network structure. In segregated co-cultures, SNF clearly enhanced the functions of hepatocytes and fibroblasts, thereby showing its potential as a measure of paracrine signaling. These results may advance the understanding of the role played by paracrine signaling in cell-to-cell communication and provide novel insights into the applications of drug metabolism, tissue repair, and regeneration.
Assuntos
Hepatócitos , Comunicação Parácrina , Ratos , Humanos , Animais , Técnicas de Cocultura , Células Cultivadas , Comunicação Celular , FibroblastosRESUMO
Anionic polysaccharides, including low-methoxy (LM) pectin, are extensively used in biomaterial applications owing to their safety, biocompatibility, and feasibility in constructing supramolecular assemblies by forming egg-box structures with divalent cations. Mixing an LM pectin solution with CaCO3 spontaneously forms a hydrogel. The gelation behavior can be controlled by adding an acidic compound to change the solubility of CaCO3. CO2 is used as the acidic agent and can be easily removed after gelation, thereby reducing the acidity of the final hydrogel. However, CO2 addition has been controlled under varied thermodynamical conditions; therefore, specific CO2 effects on gelation are not necessarily visualized. To evaluate the CO2 impact on the final hydrogel, which would be extended to control hydrogel properties further, we utilized carbonated water to supply CO2 into the gelation mixture without changing its thermodynamic conditions. The addition of the carbonated water accelerated gelation and significantly increased the mechanical strength, promoting cross-linking. However, the CO2 volatilized into the atmosphere, and the final hydrogel became more alkaline than that without the carbonated water, probably because a considerable amount of the carboxy group was consumed for cross-linking. Moreover, when aerogels were prepared from the hydrogels with carbonated water, they exhibited highly ordered networks of elongated porosity in scanning electron microscopy, proposing an intrinsic structural change by CO2 in the carbonated water. We also controlled the pH and strength of the final hydrogels by changing the CO2 amounts in the carbonated water added, thereby validating the significant effect of CO2 on hydrogel properties and the feasibility of using carbonated water.
RESUMO
Acrylate monomers with metal complexes were designed to build polymer metal complexes. The ideal copolymerization of monomers with zinc and platinum was performed to obtain random copolymers with a feeding metal composition. The successful nano-colloid preparation from the polymers further highlighted the potential of the method for building multimetallic materials.
RESUMO
Copper complexes act as catalysts for redox reactions to generate reactive oxygen species that destroy biomolecules and, therefore, are utilized to design drugs including antitumor and antibacterial medicines. Especially, catalytic reaction for hydrogen peroxide decomposition is important because it includes the process for generating highly toxic hydroxyl radical, i.e., Fenton-like reaction. Considering that multicoppers/hydrogen peroxide species are the important intermediates for the redox reaction, herein a polymer having copper complexes in the side chains is designed to facilitate the formation of the intermediates by building locally concentrated state of the copper complexes. The polymer increases their catalytic activities for hydrogen peroxide decomposition and promotes reactive oxygen species' generation, eventually leading to higher antibacterial activity. This reveals the virtue of building a locally concentrated state of catalysts on polymers toward drug design with low amounts of transition metals.
Assuntos
Cobre , Peróxido de Hidrogênio , Catálise , Oxirredução , PolímerosRESUMO
Despite tremendous complexity in glycan structure, sialic acid (SA) provides an analytically accessible index for glycosylation, owing to its uniquely anionic nature and glycan-chain terminal occupation. Taking advantage of boronic acid (BA) based SA-recognition chemistry, we here demonstrate a label-free, no enzymatic, potentiometric determination of fetuin, a blood-circulating glycoprotein implicated in physiological and various pathological states. A phenylboronic acid (PBA) ω-end-functionalized poly(ethylene glycol) (PEG) with an α-tethering unit bearing pendent alkyne groups was "grafted-to" a gold electrode modified with 11-azide-undecathiol by a copper-catalyzed azide-alkyne cycloaddition reaction. Using the electrode, fetuin was potentiometrically detectable with a µM-order-sensitivity that is comparable to what is found in blood-collected specimen. Our finding may have implications for developing a remarkably economic hemodiagnostic technology with ease of downsizing and mass production.
Assuntos
Ácidos Borônicos/química , Eletrodos , Fetuínas/metabolismo , Glicoproteínas/sangue , Polietilenoglicóis/química , Potenciometria/instrumentação , Limite de DetecçãoRESUMO
Tracing cell surface sialylation dynamics at a scale of the glycolipoprotein microdomain (lipid rafts) formations remains an intriguing challenge of cellular biology. Here, we demonstrate that this goal is accessible, taking advantage of a boronic acid (BA)-based reversible molecular recognition chemistry. A BA-end-functionalized poly(ethylene glycol) was decorated onto an atomic force microscopy (AFM) cantilever, which provided a dynamic and sialic acid (SA)-specific imaging mode. Using this technique, we were able to heat map the SA expression levels not only on protein-decorated substrates but also directly on the cell surfaces, with a submicrometer scale resolution that may be relevant to that of the lipid rafts formation. The SA specificity and the binding reversibility of the probe were confirmed from its pH-dependent characteristics and an inhibition assay using free state SA. This finding may provide a noninvasive means for assessing a variety of SA-involved glycosylation dynamics spanning from physiology to pathology.
Assuntos
Ácidos Borônicos/química , Microscopia de Força Atômica/métodos , Ácido N-Acetilneuramínico/química , Membrana Celular , HumanosRESUMO
A major critical issue in systemically administered nanomedicines is nonspecific clearance by the liver sinusoidal endothelium, causing a substantial decrease in the delivery efficiency of nanomedicines into the target tissues. Here, we addressed this issue by in situ stealth coating of liver sinusoids using linear or two-armed poly(ethylene glycol) (PEG)-conjugated oligo(l-lysine) (OligoLys). PEG-OligoLys selectively attached to liver sinusoids for PEG coating, leaving the endothelium of other tissues uncoated and, thus, accessible to the nanomedicines. Furthermore, OligoLys having a two-armed PEG configuration was ultimately cleared from sinusoidal walls to the bile, while OligoLys with linear PEG persisted in the sinusoidal walls, possibly causing prolonged disturbance of liver physiological functions. Such transient and selective stealth coating of liver sinusoids by two-arm-PEG-OligoLys was effective in preventing the sinusoidal clearance of nonviral and viral gene vectors, representatives of synthetic and nature-derived nanomedicines, respectively, thereby boosting their gene transfection efficiency in the target tissues.
Assuntos
Nanomedicina , Polietilenoglicóis , FígadoRESUMO
Whereas small siRNA nanocarriers with a size of 10-20 nm exert high tissue-permeability, they encounter the challenge of inefficient adsorption on the cell surface, resulting in poor cellular uptake of siRNA. To solve this dilemma, this study aims to control the hydrophobicity of a small siRNA nanocarrier, unimer polyion complex (uPIC), with a size of â¼10 nm. The uPICs are fabricated to consist of a single pair between siRNA and a smart triblock copolymer comprising hydrophilic poly(2-ethyl-2-oxazoline) (PEtOx), thermoswitchable poly(2-n-propyl-2-oxazoline) (PnPrOx), and cationic poly(l-lysine) (PLL). The PnPrOx segment is dehydrated at 37 °C (>lower critical solution temperature) to enhance the hydrophobicity of uPICs. The uPICs with a hydrophobic domain facilitates cellular uptake of the siRNA payload through stronger binding to the cell surface, compared with control uPICs without a PnPrOx segment, leading to a significantly enhanced gene silencing effect in cultured cancer cells.
Assuntos
Portadores de Fármacos/química , Interações Hidrofóbicas e Hidrofílicas , Nanoestruturas/química , Polímeros/química , RNA Interferente Pequeno/química , RNA Interferente Pequeno/metabolismo , Temperatura , Transporte Biológico , Inativação Gênica , Células HeLa , Humanos , RNA Interferente Pequeno/genéticaRESUMO
Despite the rigidity of double-stranded DNA (dsDNA), its packaging is used to construct nonviral gene carriers due to its availability and the importance of its double-helix to elicit transcription. However, there is an increasing demand for more compact-sized carriers to facilitate tissue penetration, which may be easily fulfilled by using the more flexible single-stranded DNA (ssDNA) as an alternative template. Inspired by the adeno-associated virus (AAV) as a prime example of a transcriptionally active ssDNA system, we considered a methodology that can capture unpaired ssDNA within the polyplex micelle system (PM), an assembly of DNA and poly(ethylene glycol)-b-poly(l-lysine) (PEG-PLys). A micellar assembly retaining unpaired ssDNA was prepared by unpairing linearized pDNA with heat and performing polyion complexation on site with PEG-PLys. The PM thus formed had a compact and spherical shape, which was distinguishable from the rod-shaped PM formed from dsDNA, and still retained its ability to activate gene expression. Furthermore, we demonstrated that its capacity to encapsulate DNA was much higher than AAV, thereby potentially allowing the delivery of a larger variety of protein-encoding DNA. These features permit the ssDNA-loaded PM to easily penetrate the size-restricting stromal barrier after systemic application. Further, they can elicit gene expression in tumor cell nests of an intractable pancreatic cancer mouse model to achieve antitumor effects through suicide gene therapy. Thus, single-stranded DNA-packaged PM is appealing as a potential gene vector to tackle intractable diseases, particularly those with target delivery issues due to size-restriction barriers.
Assuntos
DNA de Cadeia Simples/química , Dependovirus/genética , Técnicas de Transferência de Genes , Neoplasias Pancreáticas/terapia , Polímeros/química , Células Estromais/patologia , Animais , Vetores Genéticos/genética , Humanos , Camundongos , Micelas , Tamanho da PartículaRESUMO
The major issues in messenger (m)RNA delivery are rapid mRNA degradation in the extracellular and intracellular spaces, which decreases the efficiency and duration for protein expression from mRNA. Stabilization of mRNA carriers using environment-responsive crosslinkings has promises to overcome these issues. Herein, we fine-tuned the structure of disulphide crosslinkings, which are selectively cleaved in the intracellular reductive environment, using the mRNA-loaded polyplex micelles (PMs) prepared from poly(ethylene glycol)-poly(L-lysine) (PEG-PLys) block copolymers, particularly by focussing on cationic charge density after the crosslinking. Primary amino groups in PLys segment were partially thiolated in two ways: One is to introduce 3-mercaptopropionyl (MP) groups via amide linkage, resulting in the decreased cationic charge density [PEG-PLys(MP)], and the other is the conversion of amino groups to 1-amidine-3-mercaptopropyl (AMP) groups with preserving cationic charge density [PEG-PLys(AMP)]. Compared to non-crosslinked and PEG-PLys(MP) PMs, PEG-PLys(AMP) PM attained tighter mRNA packaging in the PM core, thereby improving mRNA nuclease tolerability in serum and intracellular spaces, and providing enhanced protein expression in cultured cells at the optimal crosslinking density. These findings highlight the importance of cationic charge preservation in installing crosslinking moieties, providing a rationale for mRNA carrier design in the molecular level.
Assuntos
Dissulfetos/metabolismo , Espaço Intracelular/metabolismo , Polímeros/metabolismo , RNA Mensageiro/metabolismo , Linhagem Celular Tumoral , Técnicas de Transferência de Genes , Humanos , Micelas , Polietilenoglicóis/metabolismo , Polilisina/metabolismo , Transfecção/métodosRESUMO
Metal complexes with planar structures have been utilized as DNA intercalators that can be inserted into the base pairs of DNA strands, and have potential applications in DNA-targeting drug therapies. When designing the intercalator metal complexes, controlling their interactions with DNA is important, and has been performed by modifying the chemical structure of the metal ligand. Herein, we designed a graft copolymer segment having Pt complexes with bipyridine and poly(ethylene glycol) (p(PEGMA-co-BPyMA-Pt)) as another strategy to control the interaction with DNA via a multivalent effect. The p(PEGMA-co-BPyMA-Pt) increased not only the binding constant as one macromolecule but also the apparent binding constant per intercalator unit compared to the Pt complex with bipyridine (BPy-Pt). Moreover, p(PEGMA-co-BPyMA-Pt) induced a larger change in DNA structure using lower amounts of Pt than BPy-Pt. These observed properties of p(PEGMA-co-BPyMA-Pt) suggest that grafting intercalators on polymer segments is a promising approach for designing novel types of intercalators.
RESUMO
For intravenous delivery of antisense oligonucleotides (ASOs) to solid tumors, a triblock copolymer was synthesized from poly(2-ethyl-2-oxazoline) (PEtOx), poly(2-n-propyl-2-oxazoline) (PnPrOx), and poly(l-lysine) (PLL) segments. The triblock copolymer, PEtOx-PnPrOx-PLL, was utilized to fabricate a compartmentalized polymeric micelle featuring a hydrophilic PEtOx shell, thermoresponsive PnPrOx interlayer, and ASO/PLL polyion complex (PIC) core. In this formulation, the PnPrOx-derived interlayer underwent the phase transition from hydrophilic elongated state to hydrophobic collapsed state at a lower critical solution temperature (LCST) to enhance the micelle stability. Three triblock copolymers comprising varying lengths of PEtOx segment (2k, 7k, and 12 kDa) were compared to investigate the effect of hydrophilic chain length on the micelle properties. The triblock copolymer micelles (TCMs) were prepared in a two-step manner: mixing between triblock copolymer and ASO in a buffer solution at 4 °C and then increasing the temperature of the solution up to 37 °C. This protocol was crucial for the fabrication of TCMs with both smaller size and narrower size distribution, probably due to the formation of the well-compartmentalized hydrophobic interlayer in the micelle structure. The presence of the PnPrOx segment dramatically enhanced the stability of TCMs in serum-containing media and elicited more efficient cellular uptake of ASO payloads, resulting in higher gene silencing efficiency in cultured prostate cancer (PC-3) cells, compared with a control diblock copolymer micelle (DCM). The blood circulation property of TCMs was prolonged with an increase in the length of PEtOx segment, permitting the efficient accumulation of ASO payloads in a subcutaneous PC-3 tumor model. Ultimately, the systemic delivery of ASO targeting a long noncoding RNA (lncRNA) by the TCMs significantly reduced the expression level of lncRNA in the subcutaneous PC-3 tumor in a sequence-specific manner. These results demonstrate the superiority of TCMs equipped with the hydrophilic shell and hydrophobic interlayer to the cancer-targeted systemic ASO delivery.
RESUMO
The design of biocompatible, degradable, and injectable hydrogel has been attractive for achievement of safe and efficient tissue engineering. Herein, we designed a N-hydroxysuccinimide (NHS) ester-terminated ABA triblock copolymer composed of poly(ethylene glycol) (PEG) as hydrophilic A segments and poly(dl-lactide) (PLA) as B segment having hydrolysis property (NHS-PEG-b-PLA-b-PEG-NHS) to be a cross-linker of polymer segments having amine groups for facile construction of injectable and degradable hydrogel. The PLA domain, which is widely accepted hydrolyzable segments, is inherently hydrophobic and simple introduction of the NHS group on the ends of PLA would not have high reactivity in aqueous milieu to construct injectable hydrogel. Thus, in this design, hydrophilic PEG was introduced as A segments to increase the reactivity of NHS groups at the ends of linkers by increasing the mobility. To demonstrate the property as a cross-linker for constructing degradable and injectable hydrogel, carboxylmethyl chitosan (CH), which is a polymer segment having amine groups, and NHS-PEG-b-PLA-b-PEG-NHS solutions were mixed to form the hydrogel (CH/PEG-PLA-PEG) under physiological condition. The formation of CH/PEG-PLA-PEG hydrogel proceeded within minute-order period after mixing the solutions, suggesting NHS-PEG-b-PLA-b-PEG-NHS is applicable to the cross-linker for construction of injectable hydrogel system with time-dependent gelation property. Degradation of the obtained CH/PEG-PLA-PEG hydrogel was observed, whereas that of CH/PEG, which was prepared from NHS-PEG-NHS and CH, was not observed, appealing the degradation property of the CH/PEG-PLA-PEG hydrogel based on hydrolysis of the PLA domain. Furthermore, chondrocytes embedded in CH/PEG-PLA-PEG hydrogels promoted collagen synthesis compared to CH/PEG. These demonstrations indicate the designed NHS-PEG-b-PLA-b-PEG-NHS is a promising cross-linker to construct the injectable and degradable hydrogel and eventually promote hydrogel performance as a tissue regeneration scaffold.
RESUMO
Surface functionalization of nanoparticles is a crucial factor for nanoparticle-mediated drug and nucleic acid delivery. Particularly, the density of targeting ligands on nanoparticle significantly affects the affinity of nanoparticles to specific cellular surface (or receptor) through the multivalent binding effect. Herein, multilayered polyion complexes (mPICs) are prepared to possess varying densities of cyclic RGD peptide (cRGD) ligands for cancer-targeted small interfering RNA (siRNA) delivery. A template PIC is first prepared by mixing siRNAs with homo catiomers of N-substituted polyaspartamide bearing tetraethylenepentamine (PAsp(TEP)) in aqueous solution, followed by silica-coating through silicate condensation reaction. Then, silica-coated PICs (sPICs) are further covered with block catiomers of PAsp(TEP) and poly(ethylene glycol) (PEG) equipped with cRGD ligand. Successful preparation of targeted mPICs is confirmed from the changes in size and ζ-potential and the elemental analysis by transmission electron microscopy. Notably, the number of cRGD ligands per mPIC is regulated by altering the silicate concentration upon preparation of sPICs, which is confirmed by fluorescence correlation spectroscopy using fluorescent-labeled block catiomers. Ultimately, the targeted mPICs with a higher number of cRGD ligands demonstrate more efficient cellular uptake in cultured cancer cells, leading to enhanced gene silencing activity.
Assuntos
Nanopartículas/química , Peptídeos Cíclicos/química , Polietilenoglicóis/química , RNA Interferente Pequeno/química , Dióxido de Silício/química , Sequência de Bases , Células HeLa , Humanos , Ligantes , Modelos Moleculares , Conformação de Ácido Nucleico , RNA Interferente Pequeno/genéticaRESUMO
The role of poly(ethylene-glycol) (PEG) in rod-shaped polyplex micelle structures, having a characteristic core of folded plasmid DNA (pDNA) and a shell of tethered PEG chains, is investigated using PEG-detachable polyplex micelles. Rod shapes undergo change to compacted globule shapes by removal of PEG from polyplex micelles prepared from block copolymer with acid-labile linkage between PEG and poly(l-lysine) (PLys) through exposure to acidic milieu. This structural change supports the previous investigation on the rod shapes that PEG shell prevents the DNA structure from being globule shaped as the most favored structure in minimizing surface area. Noteworthy, despite the PEG is continuously depleted, the structural change does not occur in gradual shortening manner but the rod shapes keep their length unchanged and abruptly transform into globule shapes. Analysis of PEG density reveals the transition occurred when tethered PEG of rod shapes has decreased to a critical crowdedness, i.e., discontacted with neighboring PEG, which eventually illuminates another contribution, rigidity of DNA packaged as bundle in the rod shapes, in addition to the steric repulsion of PEG, in sustaining rod shapes. This investigation affirms significant role of PEG and also DNA rigidity as bundle in the formation of rod-shaped structures enduring the quest of compaction of charge-neutralized DNA in the polyplex micelles.
Assuntos
DNA/química , Micelas , Plasmídeos/química , Polietilenoglicóis/química , Polilisina/química , Concentração de Íons de Hidrogênio , Polietilenoglicóis/síntese químicaRESUMO
Improving the stability of polyplex micelles under physiological conditions is a critical issue for promoting gene transfection efficiencies. To this end, hydrophobic palisade was installed between the inner core of packaged plasmid DNA (pDNA) and the hydrophilic shell of polyplex micelles using a triblock copolymer consisting of hydrophilic poly(2-ethyl-2-oxazoline), thermoswitchable amphiphilic poly(2-n-propyl-2-oxazoline) (PnPrOx) and cationic poly(L-lysine). The two-step preparation procedure, mixing the triblock copolymer with pDNA below the lower critical solution temperature (LCST) of PnPrOx, followed by incubation above the LCST to form a hydrophobic palisade of the collapsed PnPrOx segment, induced the formation of spatially aligned hydrophilic-hydrophobic double-protected polyplex micelles. The prepared polyplex micelles exhibited significant tolerance against attacks from nuclease and polyanions compared to those without hydrophobic palisades, thereby promoting gene transfection. These results corroborated the utility of amphiphilic poly(oxazoline) as a molecular thermal switch to improve the stability of polyplex gene carriers relevant for physiological applications.
Assuntos
DNA/química , Micelas , Plasmídeos/genética , Poliaminas/química , Polilisina/química , Transfecção/métodos , Interações Hidrofóbicas e Hidrofílicas , Microscopia Eletrônica de Transmissão , Polietilenoglicóis/químicaRESUMO
Poly(ethylene glycol) (PEG) modification onto a gene delivery carrier for systemic application results in a trade-off between prolonged blood circulation and promoted transfection because high PEG shielding is advantageous in prolonging blood retention, while it is disadvantageous with regard to obtaining efficient transfection owing to hampered cellular uptake. To tackle this challenging issue, the present investigation focused on the structure of polyplex micelles (PMs) obtained from PEG-poly(l-lysine) (PEG-PLys) block copolymers characterized as rod-shaped structures to seek the most appreciable formulation. Comprehensive investigations conducted with particular focus on stability, PEG crowdedness, and rod length, controlled by varying PLys segment length, clarified the effect of these structural features, with particular emphasis on rod length as a critical parameter in promoting cellular uptake. PMs with rod length regulated below the critical threshold length of 200 nm fully exploited the benefits of cross-linking and the cyclic RGD ligand, consequently, exhibiting remarkable transfection efficiency comparable with that of ExGen 500 and Lipofectamine(®) LTX with PLUS™ even though PMs were PEG shielded. The identified PMs exhibited significant antitumor efficacy in systemic treatment of pancreatic adenocarcinoma, whereas PMs with rod length above 200 nm exhibited negligible antitumor efficacy despite a superior blood circulation property, thereby highlighting the significance of controlling the rod length of PMs to promote gene transduction.
Assuntos
Terapia Genética/métodos , Micelas , Neoplasias Pancreáticas/terapia , Transfecção/métodos , Animais , Linhagem Celular Tumoral , Feminino , Citometria de Fluxo , Técnicas de Transferência de Genes , Células HeLa , Humanos , Camundongos , Camundongos Endogâmicos BALB C , Microscopia Eletrônica de Transmissão , Peptídeos Cíclicos/metabolismo , Polietilenoglicóis/química , Polímeros/química , Neoplasias PancreáticasRESUMO
Herein, we report a unique technique to accelerate polymer-SNA conjugation based on copper-free click chemistry: gradual freeze-thawing of the reaction solution substantially increases the conjugation rate possibly because of the reactant concentration at the microenvironment scale. This technique was applied to the conjugation between a small interfering RNA (siRNA) and PEG in an aqueous buffer at/below room temperature.