Iron-promoted zirconia-alumina supported Ni catalyst for highly efficient and cost-effective hydrogen production via dry reforming of methane.

Developing cost-effective and high-performance catalyst systems for dry reforming of methane (DRM) is crucial for producing hydrogen (H2) sustainably. Herein, we investigate using iron (Fe) as a promoter and major alumina support in Ni-based catalysts to improve their DRM performance. The addition of iron as a promotor was found to add reducible iron species along with reducible NiO species, enhance the basicity and induce the deposition of oxidizable carbon. By incorporating 1 wt.% Fe into a 5Ni/10ZrAl catalyst, a higher CO2 interaction and formation of reducible "NiO-species having strong interaction with support" was observed, which led to an ∼80% H2 yield in 420 min of Time on Stream (TOS). Further increasing the Fe content to 2wt% led to the formation of additional reducible iron oxide species and a noticeable rise in H2 yield up to 84%. Despite the severe weight loss on Fe-promoted catalysts, high H2 yield was maintained due to the proper balance between the rate of CH4 decomposition and the rate of carbon deposit diffusion. Finally, incorporating 3 wt.% Fe into the 5Ni/10ZrAl catalyst resulted in the highest CO2 interaction, wide presence of reducible NiO-species, minimum graphitic deposit and an 87% H2 yield. Our findings suggest that iron-promoted zirconia-alumina-supported Ni catalysts can be a cheap and excellent catalytic system for H2 production via DRM.

Impact of transportation in freshwater and brackish water on Nile tilapia (Oreochromis niloticus) resistance.

BACKGROUND: Oreochromis niloticus has great economic value and potential for farming and development. Transportation of fish was done for breeding or trading purpose and it is a challenging aspect of aquaculture. This study aimed to investigate the effect of transportation in freshwater and brackish water on the resistance of O. niloticus as well as transportation stress mitigation effect of NaCl. Four equal groups were used; each of 50 fish, the 1st group served as the control (P 1), while the 2nd group (PT 2) was transported in water without salt, the 3rd (PT 3) and 4th (PT 4) groups were transported in water containing 5 gL- 1 and 10 gL- 1 salt respectively. PT 2, PT 3 and PT 4 were transported for 5 h without any rest or sedative drugs. RESULTS: The serum cortisol of O. niloticus significantly increased at 0 h and then decreased at 12 and 24 h post transportation in the PT 2 group and non-significantly increased at all point times in the PT 3 and PT 4 groups comparing to P 1 group. Mucin2 gene (MUC2) expression was non-significantly up regulated in the PT 2 group and down regulated in the PT 3 and PT 4 groups at 0 h comparing with P 1 group, but at 12 and 24 h it was significantly up regulated in the PT 2, PT 3 and PT 4 groups. The ß Defensin-1 (ß D1) and 2 (ß D2) genes expression was non-significantly down-regulated in the PT 2 group and significantly up regulated in the PT 3 and PT 4 groups at 0 h., while at 12 and 24 h was significantly down regulated in the PT 2 group and non-significantly down regulated in the PT 3 and PT 4 groups, it significantly down regulated in the PT 2 and PT 3 group and non-significantly down regulated in the PT 4 group at 24 h. Non-significant up regulation in interleukin - 1ß (IL-1ß) gene expression was reported in the PT 2 group and non-significant down regulation in the PT 3 and PT 4 groups at 0 h. However, significant up regulation was recorded in the PT 2, PT 3 and PT 4 groups at 12 and 24 h. The Tumor necrosis factor-alpha (TNF-α) gene expression was non-significantly up regulated in the PT 2 group and non-significantly down regulated in the PT 3 and PT 4 groups at 0 h. However, it was significantly up regulated in the PT 2, PT 3 and PT 4 groups at 12 and 24 h. CONCLUSION: The results of this study confirmed the stressful effect of transportation on O. niloticus as well as the transportation stress mitigation effect of NaCl.

Microglia depletion and repopulation do not alter the effects of cranial irradiation on hippocampal neurogenesis.

Cranial radiotherapy can cause lifelong cognitive complications in childhood brain tumor survivors, and reduced hippocampal neurogenesis is hypothesized to contribute to this. Following irradiation (IR), microglia clear dead neural progenitors and give rise to a neuroinflammatory microenvironment, which promotes a switch in surviving progenitors from neuronal to glial differentiation. Recently, depletion and repopulation of microglia were shown to promote neurogenesis and ameliorate cognitive deficits in various brain injury models. In this study, we utilized the Cx3cr1CreERt2-YFP/+Rosa26DTA/+ transgenic mouse model to deplete microglia in the juvenile mouse brain before subjecting them to whole-brain IR and investigated the short- and long-term effects on hippocampal neurogenesis. Within the initial 24 h after IR, the absence of microglia led to an accumulation of dead cells in the subgranular zone, and 50-fold higher levels of the chemokine C-C motif ligand 2 (CCL2) in sham brains and 7-fold higher levels after IR. The absence of microglia, and the subsequent repopulation within 10 days, did neither affect the loss of proliferating or doublecortin-positive cells, nor the reduced growth of the granule cell layer. Our results argue against a role for a pro-inflammatory microenvironment in the dysregulation of hippocampal neurogenesis and suggest that the observed reduction of neurogenesis was solely due to IR.

Locally obtained autologous bone grafts are effective for achieving arthrodesis while managing foot and ankle charcot's neuroarthropathy: short to mid-term results from a specialized north African foot and ankle surgery unit.

PURPOSE: We aimed to report the union rate after only utilizing a locally obtained autologous bone graft while correcting the deformity and performing joint arthrodesis in patients with foot and ankle Charcot neuropathy (CN) and to report on the radiographic, functional, complications incidence outcomes at a minimum of two years of follow up. METHODS: We included 24 patients having a mean age of 55.4 ± 10.1 years diagnosed with CN of the foot, ankle, or both. Seven (29.2%) cases were classified as Brodsky type 1, 11 (45.8%) as type 3 A, and six (25%) were type 4. Hindfoot and Midfoot bi-columnar arthrodesis was performed in 70.8% and 29.2% of the patients, respectively. Eight (33.3%) cases had preoperative ulcers. Functional outcomes were evaluated using a modified AOFAS score. Arthrodesis site union was assessed clinically and radiographically. All patients were available for a mean follow up of 35.7 ± 9.5 (24-54) months. RESULTS: Arthrodesis site union was achieved in 23 (95.8%) cases after a mean of 4 ± 1.7 (2-7.5) months. The mean modified AOFAS score was 72.4 ± 10.41 (46-83) points; 79.2% achieved excellent and good scores. Ulcers healed in 87.5% of the patients. Twenty-two (91.7%) patients were satisfied with their functional results. Infection incidence was 12.5%, and no patients required revision or amputation. CONCLUSION: Foot and ankle Charcot neuroarthropathy deformity correction by arthrodesis of the affected joint as a salvage management option resulted in acceptable clinical and radiological outcomes. To enhance the local environment for arthrodesis consolidation, locally obtained autografts led to higher union rates and avoided the drawbacks of using other graft types.

High SARS-CoV-2 seroincidence but low excess COVID mortality in Sierra Leone in 2020-2022.

While SARS-CoV-2 infection appears to have spread widely throughout Africa, documentation of associated mortality is limited. We implemented a representative serosurvey in one city of Sierra Leone in Western Africa, paired with nationally representative mortality and selected death registration data. Cumulative seroincidence using high quality SARS-CoV-2 serological assays was 69% by July 2021, rising to 84% by April 2022, mostly preceding SARS-CoV-2 vaccination. About half of infections showed evidence of neutralizing antibodies. However, excess death rates were low, and were concentrated at older ages. During the peak weeks of viral activity, excess mortality rates were 22% for individuals aged 30-69 years and 70% for those over 70. Based on electronic verbal autopsy with dual independent physician assignment of causes, excess deaths during viral peaks from respiratory infections were notable. Excess deaths differed little across specific causes that, a priori, are associated with COVID, and the pattern was consistent among adults with or without chronic disease risk factors. The overall 6% excess of deaths at ages ≥30 from 2020-2022 in Sierra Leone is markedly lower than reported from South Africa, India, and Latin America. Thus, while SARS-CoV-2 infection was widespread, our study highlights as yet unidentified mechanisms of heterogeneity in susceptibility to severe disease in parts of Africa.

Boosted visible-light-induced photo-Fenton degradation of organic pollutants over a novel direct Z-scheme NH2-MIL-125(Ti)@FeOCl heterojunction catalyst.

Improving the charge separation, charge transfer, and effective utilization is crucial in a photocatalysis system. Herein, we prepared a novel direct Z-scheme NH2-MIL-125(Ti)@FeOCl (Ti-MOF@FeOCl) composite photocatalyst through a simple method. The prepared composite catalyst was utilized in the photo-Fenton degradation of Rhodamine B (RhB) and ciprofloxacin (CIP). The Ti-MOF@FeOCl (10FeTi-MOF) catalyst exhibited the highest catalytic performance and degraded 99.1 and 66% of RhB and CIP, respectively. However, the pure NH2-MIL-125(Ti) (Ti-MOF) and FeOCl catalysts achieved only 50 and 92% of RhB and 50 and 37% of CIP, respectively. The higher catalytic activities of the Ti-MOF@FeOCl composite catalyst could be due to the electronic structure improvements, photoinduced charge separations, and charge transfer abilities in the catalyst system. The composite catalysts have also enhanced adsorption and visible light-responsive properties, allowing for efficient degradation. Furthermore, the electron paramagnetic resonance (EPR) signals, the reactive species trapping experiments, and Mott-Schottky (M - S) measurements revealed that the photogenerated superoxide radical (•O2-), hydroxyl radical (•OH), and holes (h+) played a vital role in the degradation process. The results also demonstrated that the Ti-MOF@FeOCl heterojunction composite catalysts could be a promising photo-Fenton catalyst system for the environmental remediation. Environmental implications The discharging of toxic contaminants such as organic dyes, antibiotics, and other emerging pollutants to the environment deteriorates the ecosystem. Specifically, the residues of organic pollutants recognized as a threat to ecosystem and a cause for carcinogenic effects. Among them, ciprofloxacin is one of antibiotics which has biological resistance, and metabolize partially in the human or animal bodies. It is also difficult to degrade ciprofloxacin completely with traditional treatment methods. Similarly, organic dyes are also toxic and a cause for carcinogenic effects. Therefore, effective degradation of organic pollutants such as RhB and ciprofloxacin with appropriate method is crucial.

Acetazolamide suppresses the progression of hepatocellular carcinoma induced by diethylnitrosamine in Wistar albino rats.

Hepatocellular carcinoma (HCC) continues to be the most prevalent type of liver cancer worldwide. Diethylnitrosamine (DEN)-induced HCC is an extensively used hepatic cancer model in experimental animals. Acetazolamide (AZA) is a carbonic anhydrase enzyme inhibitor. This study aimed to assess the therapeutic mechanism of AZA against DEN-induced HCC. Thirty male Wistar albino rats were divided equally into three groups. Group I (C): control group, Group II (HCC): DEN-induced HCC, and Group III (HCC/AZA): AZA-treated HCC. Verification of the HCC induced by DEN was confirmed by elevated liver enzymes' activities, and increased α-fetoprotein (AFP) levels, as well as distinct liver architecture changes. On the other hand, the AZA-treated HCC group experienced decreases in the activities of serum liver enzymes and AFP levels, as well as, regulated liver architecture. Additionally, it downregulated p-p38 MAPK/p-JNK1/JNK2/p-C-Jun/p-NF-κB p65 protein expressions. Moreover, it ameliorated autophagy by controlling the expression of the p-AMPK/p-mTOR1/LC3 I/II proteins. Furthermore, it downregulated the relative gene expressions of carbonic anhydrase-IX (CAIX) and hexokinase-II (HKII). Histopathological examination of AZA-treated HCC liver tissues supported these findings. Conclusion: AZA provides a new dimension in ameliorating experimentally induced HCC through regulation of hepatic biomarkers, antioxidant status, inflammatory markers, and autophagy, mediated by amelioration of CAIX and HKII gene expressions.

Unintentionally retained lap sponge mimicking an ovarian cyst two years after Caesarean section in a 37-year old patient: case report of a rare "never event" in Sudan.

INTRODUCTION: This case report reports an unusual occurrence of gossypiboma, which refers to the accidental retention of surgical materials like sponges in the peritoneal cavity. The term is derived from "gossypium" (cotton) and "boma" (place of concealment). Its incidence varies with surgical type, posing diagnostic challenges due to nonspecific symptoms and equivocal imaging. Despite its rarity, gossypiboma poses significant risks, including intestinal obstruction and abscess formation. CASE PRESENTATION: A 37-year-old woman with ten previous pregnancies and an emergent caesarean section presented with abdominal pain. Examination and ultrasound suggested an ovarian cyst. During surgery, a 10 × 10 cm gauze-filled mass adherent to the ovary and jejunum was found. Postoperatively, she recovered well with no complications. The patient was treated with intravenous fluids and antibiotics for five days post-surgery and recovered without any complications. She was discharged from the hospital five days after the procedure. CONCLUSION: To the best of our knowledge, this is the first reported case of gossypiboma in Sudan in 2024, highlighting diagnostic challenges and the need for preventive protocols. Root cause analysis of accidents, enhanced training, application of advanced technologies and a collaborative culture in the operating room can prevent the occurrence of such incidents. This case underscores the importance of meticulous surgical protocols and continuous improvement in safety measures to prevent retained surgical items, ensuring patient safety and optimal outcomes.

Enhancing the Biodegradability, Water Solubility, and Thermal Properties of Polyvinyl Alcohol through Natural Polymer Blending: An Approach toward Sustainable Polymer Applications.

The escalating environmental crisis posed by single-use plastics underscores the urgent need for sustainable alternatives. This study provides an approach to introduce biodegradable polymer blends by blending synthetic polyvinyl alcohol (PVA) with natural polymers-corn starch (CS) and hydroxypropyl methylcellulose (HPMC)-to address this challenge. Through a comprehensive analysis, including of the structure, mechanical strength, water solubility, biodegradability, and thermal properties, we investigated the enhanced performance of PVA-CS and PVA-HPMC blends over conventional polymers. Scanning electron microscopy (SEM) findings of pure PVA and its blends were studied, and we found a complete homogeneity between the PVA and both types of natural polymers in the case of a high concentration of PVA, whereas at lower concentration of PVA, some granules of CS and HMPC appear in the SEM. Blending corn starch (CS) with PVA significantly boosts its biodegradability in soil environments, since adding starch of 50 w/w duplicates the rate of PVA biodegradation. Incorporating hydroxypropyl methylcellulose (HPMC) with PVA not only improves water solubility but also enhances biodegradation rates, as the addition of HPMC increases the biodegradation of pure PVA from 10 to 100% and raises the water solubility from 80 to 100%, highlighting the significant acceleration of the biodegradation process and water solubility caused by HPMC addition, making these blends suitable for a wide range of applications, from packaging and agricultural films to biomedical engineering. The thermal properties of pure PVA and its blends with natural were studied using diffraction scanning calorimetry (DSC). It is found that the glass transition temperature (Tg) increases after adding natural polymers to PVA, referring to an improvement in the molecular weight and intermolecular interactions between blend molecules. Moreover, the amorphous structure of natural polymers makes the melting temperature ™ lessen after adding natural polymer, so the blends require lower temperature to remelt and be recycled again. For the mechanical properties, both types of natural polymer decrease the tensile strength and elongation at break, which overall weakens the mechanical properties of PVA. Our findings offer a promising pathway for the development of environmentally friendly polymers that do not compromise on performance, marking a significant step forward in polymer science's contribution to sustainability. This work presents detailed experimental and theoretical insights into novel polymerization methods and the utilization of biological strategies for advanced material design.

Modified frankincense resin stabilized gold nanoparticles for enhanced antioxidant and synergetic activity in in-vitro anticancer studies.

For the first time, Frankincense resin (FR) has been carboxymethylated to produce CMFR - AuNPs and the conjugate was utilized for the Doxorubicin drug loading. The carboxymethylation of the carboxylic, phenolic, and hydroxyl functional groups of FR has been developed into carboxymethylated Frankincense resin (CMFR). A novel CMFR-AuNPs was synthesized using the developed CMFR as a stabilizing and reducing agent. The antibacterial, antioxidant, and in-vitro anticancer activities were investigated by using CMFR-AuNPs and CMFR - AuNPs@DOX. CMFR-AuNPs demonstrated antioxidative properties by quenching DPPH radicals effectively. CMFR-AuNPs and DOX@CMFR-AuNPs demonstrated strong antibacterial activity against K. pneumoniae, S. aureus, B. subtilis, and E. coli. The cell viability was tested for CMFR -AuNPs at various concentrations of Dox-loaded CMFR -AuNPs (CMFR-AuNPs + Dox1, CMFR-AuNPs + Dox 2, & CMFR-AuNPs + Dox 3). The highest inhibition was observed on MCF-7 and HeLa cell lines using CMFR-AuNPs + Dox 3, respectively. Various techniques such as UV, FTIR, TGA, XRD, SEM, EDAX and TEM were used to characterize the designed CMFR and CMFR-AuNPs. After carboxy methylation, the amorphous nature of FR changed to crystallinity, as reflected in the XRD spectra. The XRD spectrum of the CMFR- AuNPs showed FCC structure due to the involvement of hydroxyl and carboxylic functional groups of CMFR strongly bound with the AuNPs. TGA results revealed that the CMFR is thermally more stable than FR. TEM revealed that CMFR - AuNPs were well dispersed, spherical, and hexagonal with an average diameter of 7 to 10 nm, while the size of doxorubicin loaded (DOX@CMFR-AuNPs) AuNPs was 11 to 13 nm. Green CMFR-AuNPs have the potential to enhance the drug loading and anticancer efficacy of drugs.

Synergistic integration of MXene nanostructures into electrospun fibers for advanced biomedical engineering applications.

MXene-based architectures have paved the way in various fields, particularly in healthcare area, owing to their remarkable physiochemical and electromagnetic characteristics. Moreover, the modification of MXene structures and their combination with polymeric networks have gained considerable prominence to further develop their features. The combination of electrospun fibers with MXenes would be promising in this regard since electrospinning is a well-established technique that is now being directed toward commercial biomedical applications. The introduction of MXenes into electrospun fibrous frameworks has highlighted outcomes in various biomedical applications, including cancer therapy, controlled drug delivery, antimicrobial targets, sensors, and tissue engineering. Correspondingly, this review describes the employed strategies for the preparation of electrospun configurations in tandem with MXene nanostructures with remarkable characteristics. Next, the advantages of MXene-decorated electrospun fibers for use in biomedical applications are comprehensively discussed. According to the investigations, rich surface functional groups, hydrophilicity, large surface area, photothermal features, and antimicrobial and antibacterial activities of MXenes could synergize the performance of electrospun layers to engineer versatile biomedical targets. Moreover, the future of this path is clarified to combat the challenges related to the electrospun fibers decorated with MXene nanosheets.

Can a Carbonated Lemon Drink Reduce Extracardiac Activity in Myocardial Perfusion Imaging?

Myocardial perfusion imaging (MPI) provides physiologic and functional information about the heart muscle and its blood flow. Extracardiac radioactivity can interfere with visualization of the inferior wall of the myocardium, leading to poor-quality images, difficulties in interpretation, and delays in routine practice. This study aimed to identify the efficiency of having the patient consume a carbonated lemon drink to minimize the extracardiac radioactivity of 99mTc-sestamibi in comparison to 99mTc-tetrofosmin during MPI. Methods: This was a retrospective study that recruited 158 patients with known or suspected coronary artery disease referred to undergo 99mTc-sestamibi or 99mTc-tetrofosmin rest/stress single-day MPI. The patients were divided into 2 groups of mixed sexes and different ages. The first group comprised 78 patients injected with 99mTc-sestamibi, and the second group comprised 80 patients injected with 99mTc-tetrofosmin. For both groups, the patients drank 30 mL of fresh lemon juice diluted with 150 mL of soda water, and then we gave the patients about 100 mL of straight soda water, before imaging for both the rest and the stress phases. Results: Generally, in both groups, the 99mTc-tetrofosmin produced a good-quality image in comparison with the 99mTc-sestamibi. The mean rank of the total score for 99mTc-tetrofosmin (62.75) was less than that for 99mTc-sestamibi (96.68), and this difference was highly statistically significant (P = 0.000). There were statistically significant differences in the ratios and mean ranks for both groups in favor of 99mTc-tetrofosmin in patients having coronary artery disease. Conclusion: The use of a carbonated lemon drink minimizes extracardiac activity from both 99mTc-labeled MPI radiopharmaceuticals. This finding was more statistically significant for 99mTc-tetrofosmin MPI, providing better image quality and earlier imaging in both the rest and the stress phases because of faster hepatobiliary clearance.

Ni-Based Molecular Sieves Nanomaterials for Dry Methane Reforming: Role of Porous Structure and Active Sites Distribution on Hydrogen Production.

Global warming, driven by greenhouse gases like CH4 and CO2, necessitates efficient catalytic conversion to syngas. Herein, Ni containing different molecular sieve nanomaterials are investigated for dry reforming of methane (DRM). The reduced catalysts are characterized by surface area porosity, X-ray diffraction, Raman infrared spectroscopy, CO2 temperature-programmed desorption techniques, and transmission electron microscopy. The active sites over each molecular sieve remain stable under oxidizing gas CO2 during DRM. The reduced 5Ni/CBV10A catalyst, characterized by the lowest silica-alumina ratio, smallest surface area and pore volume, and narrow 8-ring connecting channels, generated the maximum number of active sites on its outer surface. In contrast, the reduced-5Ni/CBV3024E catalyst, with the highest silica-alumina ratio, more than double the surface area and pore volume, 12-ring sinusoidal porous channels, and smallest Ni crystallite, produced the highest H2 output (44%) after 300 min of operation at 700 °C, with a CH4:CO2 = 1:1, P = 1 atom, gas hour space velocity (GHSV) = 42 L gcat-1 h-1. This performance was achieved despite having 25% fewer initial active sites, suggesting that a larger fraction of these sites is stabilized within the pore channels, leading to sustained catalytic activity. Using central composite design and response surface methodology, we successfully optimized the process conditions for the 5Ni/CBV3024E catalyst. The optimized conditions yielded a desirable H2 to CO ratio of 1.00, with a H2 yield of 91.92% and a CO yield of 89.16%, indicating high efficiency in gas production. The experimental results closely aligned with the predicted values, demonstrating the effectiveness of the optimization approach.

Rapid and robust isolation of microglia and vascular cells from brain subregions for integrative single-cell analyses.

Cell isolation protocols from brain tissue include prolonged ex vivo processing durations, rendering them suboptimal for transcriptomic studies. Particularly for microglia and vascular cells, current isolation methods produce lower yields, necessitating addition of an enrichment step, and use of large tissue volumes - in most cases whole brain tissue - to obtain sufficient yields. Here, we developed a simple, rapid, and reproducible cell isolation method for generating single-cell suspensions from micro-dissected brain regions, enriched for microglia and vascular cells, without an enrichment step. Cells isolated using this method are suitable for molecular profiling studies using 10 × Genomics Chromium single-cell RNA sequencing with high reproducibility. Our method is valuable for longitudinal unbiased molecular profiling of microglia and vascular cells within different brain regions, spanning multiple time points across physiological development or disease progression.

Valorizing date palm spikelets into activated carbon-derived composite for methyl orange adsorption: advancing circular bioeconomy in wastewater treatment-a comprehensive study on its equilibrium, kinetics, thermodynamics, and mechanisms.

Leveraging date palm spikelets (DPS) as a precursor, this study developed a DPS-derived composite (ZnO@DPS-AC) for water treatment, focusing on methyl orange (MO) removal. The composite was synthesized through ZnCl2 activation and pyrolysis at 600 °C. Comprehensive characterization was conducted using TGA, FTIR, XRD, SEM/EDS, and pHPZC. Characterization revealed a highly carbonaceous material (> 74% carbon) with significant porosity and surface functional groups. ZnO@DPS-AC demonstrated rapid MO removal, achieving over 45% reduction within 10 min and up to 99% efficiency under optimized conditions. The Langmuir model-calculated maximum adsorption capacity reached 226.81 mg/g at 20 °C. Adsorption mechanisms involved hydrogen bonding, π-π interactions, and pore filling. The composite showed effectiveness in treating real wastewater and removing other pollutants. This study highlights the potential of agricultural waste valorization in developing efficient, sustainable adsorbents for water remediation, contributing to circular bioeconomy principles.

Room-temperature synthesis of a Zr-UiO-66 metal-organic framework via mechanochemical pretreatment for the rapid removal of EDTA-chelated copper from water.

Treatment of heavy metal pollution in complexed states within water bodies presents significant challenges in the current water treatment field. Adsorption as a means for the removal of heavy metals is characterized by its simplicity of operation, stable effluent, and minimal equipment requirements. Metal-organic frameworks (MOFs) as adsorbents hold significant interest for applications in water treatment. In this study, we investigated a green synthesis approach for the ball-milling pretreated synthesis of UiO-66(Zr) at room temperature, abbreviated as UiO-66(Zr)-rm. Besides having the same thermal stability and crystal structure as the product from microwave-assisted synthesis (UiO-66(Zr)-mw), the resulting UiO-66(Zr)-rm features smaller particle size and superior mesoporous structure. The adsorption efficiency and mechanism for removing EDTA-chelated copper (EDTA-CuII), a complexed heavy metal in water, were extensively analyzed. UiO-66(Zr)-rm presented a maximum adsorption capacity over EDTA-CuII of 43 mg g-1 and a much higher adsorption rate (0.16 g (mg h)-1) than UiO-66(Zr)-mw (0.06 g (mg h)-1). Hierarchically mesostructured defects allow the sorbate to have more effective diffusion in a shorter time to achieve faster adsorption kinetics. Benefiting from the mild synthesis conditions and nontoxic solvents, UiO-66(Zr) has the potential to be produced at a scaled-up level, thereby exhibiting excellent adsorption performance for the removal of complexed heavy metals in the future.

Evaluation of plant-derived biomaterials for the development of tissue-engineered corneal substitutes.

Corneal blindness affects over 10 million patients worldwide. Due to the limited supply of donor corneas and frequent graft failure, bioengineered alternatives are crucial. To overcome drawbacks associated with corneal substitutes from synthetic biomaterials, fabrication from plant-derived biomaterials is a potential alternative. Herein, soy protein and glutenin in combination with different crosslinkers were evaluated for fabrication of corneal substitutes. Optical, mechanical, and biochemical properties of fabricated constructs and control rabbit corneas were evaluated in vitro. Soy protein crosslinked with peroxidase/H202 possessed transparency and mechanical properties comparable to controls, although their water content and biocompatibility were inferior. In contrast, soy protein crosslinked with tannic acid showed similar water content, tensile strength, and biocompatibility as rabbit corneas; however, these constructs displayed significantly lower transparency and higher strain to failure. Finally, glutenin cross-linked using formaldehyde showed excellent transparency, strain to failure, and biocompatibility, however; they exhibited significantly lower water content and tensile strength than controls. This study is the first to establish CIELAB color values for the rabbit cornea, allowing quantitative optical evaluation of tissue-engineered substitutes. Thus, a crosslinking strategy utilizing plant-derived proteins for fabrication of constructs with properties comparable to rabbit corneas is a promising direction for development of tissue-engineered corneal substitutes.

New Insight into the Effects of Different Types of Midfoot and Hindfoot Deformities on the Functional Outcomes of Rheumatoid Arthritis Patients.

In advanced stages of rheumatoid arthritis (RA), the pattern of joint involvement leads to varied types of foot deformities such as forefoot, midfoot, and hindfoot deformities. We aim to evaluate midfoot and hindfoot deformities and their effect on functional outcomes in RA patients. In this prospective cross-sectional study clinical and radiological evaluations of 100 adult RA patients were studied for midfoot and hindfoot deformities. The RA disease activity, functional disability level, specific foot and ankle assessments, gait speed, and balance tests were assessed. Radiological examinations of the weight-bearing feet in a standing position were done. We found that the most frequent deformity type was the planovalgus foot (24%). There were statistically significant differences between the types of foot deformities and disease duration, disease activity, falls, Tinetti and Berg balance Test, and health assessment questionnaire-disability index. The multivariate regression analysis of independent correlates of falling detected that patients with equinovarus deformity were 2.5 times more liable for falling with 63.5% predictive power. According to the predictive criteria of deformity type for falling, the equinocavovarus type had accuracy, sensitivity, specificity, positive predictive value, and negative predictive value of 91%, 84.5%, 98.5%, 99%, and 84%, respectively. We found in RA patients, midfoot and hindfoot deformities cause a significant reduction of functional ability and quality of life. The early detection of foot deformities requires a good awareness of the clinical and radiographic diagnosis of different types of deformities thus reducing the possible functional disabilities via early management by combined orthotic, physiotherapy, and surgical treatments.

Novel Approach to Photocatalytic Removal of Linezolid by Advanced Nano-Biochar/Bismuth Oxychloride Hybrid.

Herein, we introduce an innovative nanohybrid material for advanced wastewater treatment, composed of Corchorus olitorius-derived biochar and bismuth oxychloride (Biochar/Bi12O17Cl2), demonstrated in a solar photoreactor. This work focuses on the efficient degradation of linezolid (LIN), a persistent pharmaceutical pollutant, utilizing the unique (photo)catalytic capabilities of the nanohybrid. Compared with its individual components, the biochar/Bi12O17Cl2 hybrid exhibits a remarkable degradation efficiency of 82.6% for LIN, alongside significant chemical oxygen demand (COD) and total organic carbon (TOC) mineralization rates of 81.3 and 75.8%, respectively. These results were achieved within 3 h under solar irradiation, using an optimal composite dose of 125 mg/L at pH 4.3 ± 0.45, with an initial COD and LIN concentrations of 1605 and 160.8 mg/L and TOC of 594.3 mg/L. The nanohybrid's stability across five cycles of use demonstrates its potential for repeated applications, with degradation efficiencies of 82.6 and 77.9% in the first and fifth cycles, respectively. This indicates the biochar/Bi12O17Cl2 composite's suitability as a sustainable and cost-effective solution for the remediation of heavily contaminated waters. Further, the degradation pathway proposed the degradation of all of the generated intermediates to a single-ring compound. Contributing to the development of next-generation materials for environmental remediation, this research underscores the critical role of nanotechnology in enhancing water quality and ecosystem sustainability and addressing the global imperative for clean water access and environmental preservation.