Multi-Technique Experimental Benchmarking of the Local Magnetic Anisotropy of a Cobalt(II) Single-Ion Magnet.

A comprehensive understanding of the ligand field and its influence on the degeneracy and population of d-orbitals in a specific coordination environment are crucial for the rational design and enhancement of magnetic anisotropy of single-ion magnets (SIMs). Herein, we report the synthesis and comprehensive magnetic characterization of a highly anisotropic CoII SIM, [L2Co](TBA)2 (L is an N,N'-chelating oxanilido ligand), that is stable under ambient conditions. Dynamic magnetization measurements show that this SIM exhibits a large energy barrier to spin reversal U eff > 300 K and magnetic blocking up to 3.5 K, and the property is retained in a frozen solution. Low-temperature single-crystal synchrotron X-ray diffraction used to determine the experimental electron density gave access to Co d-orbital populations and a derived U eff, 261 cm-1, when the coupling between the d x 2 - y 2 and dxy orbitals is taken into account, in very good agreement with ab initio calculations and superconducting quantum interference device results. Powder and single-crystal polarized neutron diffraction (PNPD, PND) have been used to quantify the magnetic anisotropy via the atomic susceptibility tensor, revealing that the easy axis of magnetization is pointing along the N-Co-N' bisectors of the N,N'-chelating ligands (3.4° offset), close to the molecular axis, in good agreement with complete active space self-consistent field/N-electron valence perturbation theory to second order ab initio calculations. This study provides benchmarking for two methods, PNPD and single-crystal PND, on the same 3d SIM, and key benchmarking for current theoretical methods to determine local magnetic anisotropy parameters.

Influence of pressure on a dysprosocenium single-molecule magnet.

The effects of external pressure on a high-performing dysprosocenium single-molecule magnet are investigated using a combination of X-ray diffraction, magnetometry and theoretical calculations. The effective energy barrier (Ueff) decreases from ca. 1300 cm-1 at ambient pressure to ca. 1125 cm-1 at 3 GPa. Our results indicate that compression < 1.2 GPa has a negligible effect on the Orbach process, but magnetic relaxation > 1 GPa increases via Raman relaxation and/or quantum tunnelling of magnetisation.

Electron Density Analysis of Metal-Metal Bonding in a Ni4 Cluster Featuring Ferromagnetic Exchange.

We present a combined experimental and theoretical study of the nature of the proposed metal-metal bonding in the tetranuclear cluster Ni4(NPtBu3)4, which features four nickel(I) centers engaged in strong ferromagnetic coupling. High-resolution single-crystal synchrotron X-ray diffraction data collected at 25 K provide an accurate geometrical structure and a multipole model electron density description. Topological analysis of the electron density in the Ni4N4 core using the quantum theory of atoms in molecules clearly identifies the bonding as an eight-membered ring of type [Ni-N-]4 without direct Ni-Ni bonding, and this result is generally corroborated by an analysis of the energy density distribution. In contrast, the calculated bond delocalization index of ∼0.6 between neighboring Ni atoms is larger than what has been found for other bridged metal-metal bonds and implies direct Ni-Ni bonding. Similar support for the presence of direct Ni-Ni bonding is found in the interacting quantum atom approach, an energy decomposition scheme, which suggests the presence of stabilizing Ni-Ni bonding interactions with an exchange-correlation energy contribution approximately 50% of that of the Ni-N interactions. Altogether, while the direct interactions between neighboring Ni centers are too weak and sterically constrained to bear the signature of a topological bond critical point, other continuous measures clearly indicate significant Ni-Ni bonding. These metal-metal bonding interactions likely mediate direct ferromagnetic exchange, giving rise to the high-spin ground state of the molecule.

Catalytic Enantioselective Entry to Triflones Featuring a Quaternary Stereocenter.

A highly enantioselective one-pot synthesis of functionalized triflones, bearing a quaternary stereocenter, has been developed, exploiting the Michael reaction of α-(trifluoromethylsulfonyl) aryl acetic acid esters with N-acryloyl-1H-pyrazole catalyzed by commercially available Takemoto's catalyst, followed by nucleophilic acyl substitution with alcohols. Preliminary investigations highlighted the attractive potential of the triflinate anion as the leaving group for stereocontrolled postfunctionalizations.

An experimental and theoretical charge density study of theophylline and malonic acid cocrystallization.

The pharmaceutical agent theophylline (THEO) is primarily used as a bronchodilator and is commercially available in both tablet and liquid dosage forms. THEO is highly hygroscopic, reducing its stability, overall shelf-life, and therefore usage as a drug. THEO and dicarboxylic acid cocrystals were designed by Trask et al. in an attempt to decrease the hygroscopic behaviour of THEO; cocrystallisation of THEO with malonic acid (MA) did not improve the hygroscopic stability of THEO in simulated atmospheric humidity testing. The current study employed high-resolution X-ray crystallography, and Density Functional Theory (DFT) calculations to examine the electron density distribution (EDD) changes between the cocrystal and its individual components. The EED changes identified the reasons why the THEO:MA cocrystal did not alter the hygroscopic profile of THEO. The cocrystal was equally porous, with atomic packing factors (APF) similar to those of THEO 0.73 vs. 0.71, respectively. The THEO:MA (1) cocrystal structure is held together by an array of interactions; a heterogeneous synthon between the imidazole and a carboxylic fragment stabilising the asymmetric unit, a pyrimidine-imidazole homosynthon, and an aromatic cycle stack between two THEO moieties have been identified, providing 9.7-12.9 kJ mol-1 of stability. These factors did not change the overall relative stability of the cocrystal relative to its individual THEO and MA components, as shown by cocrystal (1) and THEO being equally stable, with calculated lattice energies within 2.5 kJ mol-1 of one other. The hydrogen bond analysis and fragmented atomic charge analysis highlighted that the formation of (1) combined both the EDD of THEO and MA with no net chemical change, suggesting that the reverse reaction - (1) back to THEO and MA - is of equal potential, ultimately producing THEO hydrate formation, in agreement with the work of Trask et al. These results highlight that a review of the EDD change associated with a chemical reaction can aid in understanding cocrystal design. In addition, they indicate that cocrystal design requires further investigation before becoming a reliable process, with particular emphasis on identifying the appropriate balance of synthon engineering, weak interactions, and packing dynamics.

Pronounced Magnetic Bistability in Highly Cooperative Mononuclear [Fe(Lnpdtz)2(NCX)2] Complexes.

Molecular materials that exhibit stimuli-responsive bistability are promising candidates for the development of molecular switches and sensors. We herein report on the coexistence of a wide thermal hysteretic spin crossover (SCO) effect and a thermally inducible metastable high-spin state at low temperatures achieved with the two new complexes [FeII(Lnpdtz)2(NCX)2] (X = S; Se), with Lnpdtz being (2-naphthyl-5-pyridyl-1,2,4-thiadiazole) and X = S (1) and Se (2). Pronounced π-π-stacking of the aromatic side residues of the ligands enables strong intermolecular interactions, leading to abrupt SCO properties and broad magnetic hysteresis of 10 K for X = S and 58 K for X = Se. In this paper, we also present the pressure-induced spin-state switching around 0.8 GPa. A pronounced thermally induced excited spin state trapping (TIESST effect) is observed for the highly cooperative SCO compounds, which was experimentally followed by low-temperature single crystal structure analysis (20 K) and temperature-dependent Mössbauer spectroscopy.

Quantifying magnetic anisotropy using X-ray and neutron diffraction.

In this work, the magnetic anisotropy in two iso-structural distorted tetrahedral Co(II) complexes, CoX 2tmtu2 [X = Cl(1) and Br(2), tmtu = tetra-methyl-thio-urea] is investigated, using a combination of polarized neutron diffraction (PND), very low-temperature high-resolution synchrotron X-ray diffraction and CASSCF/NEVPT2 ab initio calculations. Here, it was found consistently among all methods that the compounds have an easy axis of magnetization pointing nearly along the bis-ector of the compression angle, with minute deviations between PND and theory. Importantly, this work represents the first derivation of the atomic susceptibility tensor based on powder PND for a single-molecule magnet and the comparison thereof with ab initio calculations and high-resolution X-ray diffraction. Theoretical ab initio ligand field theory (AILFT) analysis finds the d xy orbital to be stabilized relative to the d xz and d yz orbitals, thus providing the intuitive explanation for the presence of a negative zero-field splitting parameter, D, from coupling and thus mixing of d xy and . Experimental d-orbital populations support this interpretation, showing in addition that the metal-ligand covalency is larger for Br-ligated 2 than for Cl-ligated 1.

Magnetic anisotropies of Ho(III) and Dy(III) single-molecule magnets experimentally determined via polarized neutron diffraction.

We present the magnetic anisotropy of two isostructural pentagonal-bipyramidal complexes, [Ln(H2O)5(HMPA)2]I3·2HMPA (HMPA = hexamethylphosphoramide, Ln = Dy, Ho). Using ac magnetic susceptibility measurements, we find magnetic relaxation barriers of 600 K and 270 K for the Dy- and Ho-compounds, respectively. This difference is supported by polarized neutron diffraction (PND) measured at 5 K and 1 T which provides the first experimental evidence that the transverse elements in the magnetic anisotropy of the Ho-analogue are significant, whereas the Dy-analogue has a near-axial magnetic anisotropy with vanishing transverse contributions. The coordination geometries of the two complexes are highly similar, and we attribute the loss of strong magnetic axiality as expressed in the atomic susceptibility tensors from PND, as well as the smaller relaxation barrier in the Ho-complex compared to the Dy-complex, to the less favorable interaction of the pentagonal bipyramidal crystal field with the characteristics of the Ho(III) 4f-charge distribution.

Diastereoselective Synthesis of Functionalized 5-Amino-3,4-Dihydro-2H-Pyrrole-2-Carboxylic Acid Esters: One-Pot Approach Using Commercially Available Compounds and Benign Solvents.

A novel three-step four-transformation approach to highly functionalized 5-amino-3,4-dihydro-2H-pyrrole-2-carboxylic acid esters, starting from commercially available phenylsulfonylacetonitrile, aldehydes, and N-(diphenylmethylene)glycine tert-butyl ester, was developed. The one-pot strategy delivered this class of amidines bearing, for the first time, three contiguous stereocenters, in good to high yield and diastereoselectivity. The entire sequence was carried out using diethyl carbonate and 2-methyl tetrahydrofuran as benign solvents, operating under metal-free conditions. The process could be conveniently scaled-up, and the synthetic utility of the products was demonstrated.

Investigating Complex Magnetic Anisotropy in a Co(II) Molecular Compound: A Charge Density and Correlated Ab Initio Electronic Structure Study.

Understanding magnetic anisotropy and specifically how to tailor it is crucial in the search for high-temperature single-ion magnets. Herein, we investigate the magnetic anisotropy in a six-coordinated cobalt(II) compound that has a complex geometry and distinct triaxial magnetic anisotropy from the perspective of the electronic structure, using electronic spectra, ab initio calculations, and an experimental charge density, of which the latter two provides insight into the d-orbital splitting. The analysis showed that the d-orbital splitting satisfactorily predicted the complex triaxial magnetic anisotropy exhibited by the compound. Furthermore, a novel method to directly compare the ab initio results and the d-orbital populations obtained from the experimental charge density was developed, while a topological analysis of the density provided insights into the metal-ligand bonding. This work thus further establishes the validity of using d-orbitals for predicting magnetic anisotropy in transition metal compounds while also pointing out the need for a more frequent usage of the term triaxial anisotropy in the field of single-molecule magnetism.

Accurate high-resolution single-crystal diffraction data from a Pilatus3†X CdTe detector.

Hybrid photon-counting detectors are widely established at third-generation synchrotron facilities and the specifications of the Pilatus3 X CdTe were quickly recognized as highly promising in charge-density investigations. This is mainly attributable to the detection efficiency in the high-energy X-ray regime, in combination with a dynamic range and noise level that should overcome the perpetual problem of detecting strong and weak data simultaneously. These benefits, however, come at the expense of a persistent problem for high diffracted beam flux, which is particularly problematic in single-crystal diffraction of materials with strong scattering power and sharp diffraction peaks. Here, an in-depth examination of data collected on an inorganic material, FeSb2, and an organic semiconductor, rubrene, revealed systematic differences in strong intensities for different incoming beam fluxes, and the implemented detector intensity corrections were found to be inadequate. Only significant beam attenuation for the collection of strong reflections was able to circumvent this systematic error. All data were collected on a bending-magnet beamline at a third-generation synchrotron radiation facility, so undulator and wiggler beamlines and fourth-generation synchrotrons will be even more prone to this error. On the other hand, the low background now allows for an accurate measurement of very weak intensities, and it is shown that it is possible to extract structure factors of exceptional quality using standard crystallographic software for data processing (SAINT-Plus, SADABS and SORTAV), although special attention has to be paid to the estimation of the background. This study resulted in electron-density models of substantially higher accuracy and precision compared with a previous investigation, thus for the first time fulfilling the promise of photon-counting detectors for very accurate structure factor measurements.

Influence of anion induced geometry change in Zn(ii) on the magnetization relaxation dynamics of Dy(iii) in Zn-Dy-Zn complexes.

A family of hetero-trinuclear metal complexes with the general molecular formula [Zn2Dy(L1)2(OAc)4] (X) where X = (NO3)0.92(Br)0.08 (1), ClO4 (2), Cl (3) and PF6 (4) were structurally characterized using a Schiff base ligand (HL1). The Dy(iii) ion in 1-4 exhibits distorted square anti-prism geometry; however, the extent of distortion observed around Dy(iii) in these complexes differ from each other. Consequently, 1-4 show distinct magnetization relaxation dynamics, with the anisotropic energy barrier of 25.4 cm-1, 12.9 cm-1, 14.08 cm-1 and 55.5 cm-1, respectively. The detailed electronic structure of 1-4 and the experimentally observed magnetization relaxation dynamics trends were rationalized using ab initio calculations. The detailed investigation discloses the non-zero influence of the anion themselves and the anion induced geometry change in Zn(ii) affects the electronic structure of Dy(iii), which in turn affects the magnetization relaxation dynamics. Overall, the study unveils an unprecedented methodology i.e. change in geometry of Zn(ii) by altering the anion in the crystal lattice to modulate the relaxation dynamics of Dy(iii).

Chemical Bonding in Colossal Thermopower FeSb2.

FeSb2 exhibits a colossal Seebeck coefficient ( S ) and a record-breaking high thermoelectric power factor. It also has an atypical shift from diamagnetism to paramagnetism with increasing temperature, and the fine details of its electron correlation effects have been widely discussed. The extraordinary physical properties must be rooted in the nature of the chemical bonding, and indeed, the chemical bonding in this archetypical marcasite structure has been heavily debated on a theoretical basis since the 1960s. The two prevalent models for describing the bonding interactions in FeSb2 are based on either ligand-field stabilization of Fe or a network structure of Sb hosting Fe ions. However, neither model can account for the observed properties of FeSb2 . Herein, an experimental electron density study is reported, which is based on analysis of synchrotron X-ray diffraction data measured at 15 K on a minute single crystal to limit systematic errors. The analysis is supplemented with density functional theory calculations in the experimental geometry. The experimental data are at variance with both the additional single-electron Sb-Sb bond implied by the covalent model, and the large formal charge and expected d-orbital splitting advocated by the ionic model. The structure is best described as an extended covalent network in agreement with expectations based on electronegativity differences.

High-Pressure Crystallography as a Guide in the Design of Single-Molecule Magnets.

Single-molecule magnet materials owe their function to the presence of significant magnetic anisotropy, which arises from the interplay between the ligand field and spin-orbit coupling, and this is responsible for setting up an energy barrier for magnetic relaxation. Therefore, chemical control of magnetic anisotropy is a central challenge in the quest to synthesize new molecular nanomagnets with improved properties. There have been several reports of design principles targeting such control; however, these principles rely on idealized geometries, which are rarely obtained in crystal structures. Here, we present the results of high-pressure single-crystal diffraction on the single-ion magnet, Co(SPh)4(PPh4)2, in the pressure range of 0-9.2 GPa. Upon pressurization a sequence of small geometrical distortions of the central CoS4 moeity are observed, enabling a thorough analysis of the magneto-structural correlations. The magneto-structural correlations are investigated by theoretical analyses of the pressure-dependent experimental molecular structures. We observed a significant increase in the magnitude of the zero-field splitting parameter D, from -54.6 cm-1 to -89.7 cm-1, which was clearly explained from the reduction of the energy difference between the essential dxy and dx2-y2 orbitals, and structurally assigned to the change of an angle of compression of the CoS4 moeity.

Quantification of the Magnetic Anisotropy of a Single-Molecule Magnet from the Experimental Electron Density.

Reported here is an entirely new application of experimental electron density (EED) in the study of magnetic anisotropy of single-molecule magnets (SMMs). Among those SMMs based on one single transition metal, tetrahedral CoII-complexes are prominent, and their large zero-field splitting arises exclusively from coupling between the d x 2 - y 2 and dxy orbitals. Using very low temperature single-crystal synchrotron X-ray diffraction data, an accurate electron density (ED) was obtained for a prototypical SMM, and the experimental d-orbital populations were used to quantify the dxy-d x 2 - y 2 coupling, which simultaneously provides the composition of the ground-state Kramers doublet wave function. Based on this experimentally determined wave function, an energy barrier for magnetic relaxation in the range 193-268 cm-1 was calculated, and is in full accordance with the previously published value of 230 cm-1 obtained from near-infrared spectroscopy. These results provide the first clear and direct link between ED and molecular magnetic properties.

High-Pressure Crystallographic and Magnetic Studies of Pseudo-D5h Symmetric Dy(III) and Ho(III) Single-Molecule Magnets.

Single-ion magnets based on lanthanide ions in pseudo-D5h symmetry have gained much attention in recent years as they are reported to possess a large blocking temperature and a large barrier for magnetization reversal. Magneto-structural correlations reveal that the axial O-Ln-O angle is an important parameter to control the barrier, and while it can be fine-tuned by chemical modification, an alternative would be to utilize hydrostatic pressure. Herein, we report the crystal structures and static magnetic properties of two air-stable isostructural lanthanide SIMs under applied pressures. The complexes exhibit pseudo-D5h symmetry around the Ln(III)-ion (Ln = Dy or Ho), which coordinates to five equatorial water molecules and two large neutral phosphonic diamide ligands along the axial direction. High-pressure single-crystal X-ray diffraction experiments revealed two phase-transitions and an increasing deviation from D5h-symmetry between ambient pressure and 3.6 GPa. High-pressure direct-current magnetic measurements of the Dy(III) compound showed large steps in the hysteresis loops near zero field, indicative of quantum tunneling of magnetization (QTM). These steps grow in size with increasing pressure, suggesting that QTM becomes progressively more active, which correlates well with the pressure-induced increased overall deviation from pseudo-D5h symmetry and decreasing axial O-Dy-O angle. A strong temperature dependence of the step size is seen at 0.3 GPa, which shows that the SMM character persists even at this pressure. To understand the origin of significant variation in the tunneling probability upon pressure, we performed a range of ab initio calculations based on the CASSCF/RASSI-SO/SINGLE_ANISO method on both Dy and Ho complexes. From the energies and magnetic anisotropy of the mJ sublevels, we find a complex variation of the energy barrier with pressure, and using a constructed geometrical parameter, R, taking into account changes in both bond angles and distances, we link the magnetic properties to the first coordination sphere of the molecules.

Observation of the asphericity of 4f-electron density and its relation to the magnetic anisotropy axis in single-molecule magnets.

The distribution of electrons in the 4f orbitals of lanthanide ions is often assigned a crucial role in the design of single-molecule magnets, which maintain magnetization in zero external field. Optimal spatial complementarity between the 4f-electron density and the ligand field is key to maximizing magnetic anisotropy, which is an important factor in the ability of lanthanide complexes to display single-molecule magnet behaviour. Here we have experimentally determined the electron density distribution in two dysprosium molecular complexes by interpreting high-resolution synchrotron X-ray diffraction with a multipole model. The ground-state 4f-electron density is found to be an oblate ellipsoid, as is often deduced from a simplified Sievers model that assumes a pure |±15/2> ground-state doublet for the lanthanide ion. The large equatorial asymmetry-determined by a model wavefunction-was found to contain considerable MJ mixing of |±11/2> and only 81% of |±15/2>. The experimental molecular magnetic easy axes were recovered, and found to deviate by 13.1° and 8.7° from those obtained by ab initio calculations.

Direct α-Imination of N-Acyl Pyrazoles with Nitrosoarenes.

Unprecedented α-imino N-acyl pyrazoles were efficiently and selectively prepared through the 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD)-catalyzed reaction of nitrosoarenes with N-acyl pyrazoles via an N-nitroso aldol reaction/dehydration sequence. The α-imino acyl pyrazoles were demonstrated to be new versatile intermediates for practical one-pot syntheses of α-imino amides, dipeptide precursors, esters, and ß-amino alcohols. The synthetic method competes with known protocols in terms of ready availability of the reagents and catalyst, mild and catalytic reaction conditions, gram-scale applicability, and scope of the α-imino acid derivatives achievable.

Molten metal closo-borate solvates.

Solvated lithium closo-dodecaborate, Li2B12H12 with tetrahydrofuran and acetonitrile, show unexpected melting below 150 °C. This feature has been explored to melt-infiltrate Li2B12H12 in a nanoporous SiO2 scaffold. The ionic conductivity of Li2B12H12·xACN reaches 0.08 mS cm-1 in the liquid state at 150 °C making them suitable as battery electrolytes.

Low-Barrier Hydrogen Bonds in Negative Thermal Expansion Material H3 [Co(CN)6 ].

The covalent nature of the low-barrier N-H-N hydrogen bonds in the negative thermal expansion material H3 [Co(CN)6 ] has been established by using a combination of X-ray and neutron diffraction electron density analysis and theoretical calculations. This finding explains why negative thermal expansion can occur in a material not commonly considered to be built from rigid linkers. The pertinent hydrogen atom is located symmetrically between two nitrogen atoms in a double-well potential with hydrogen above the barrier for proton transfer, thus forming a low-barrier hydrogen bond. Hydrogen is covalently bonded to the two nitrogen atoms, which is the first experimentally confirmed covalent hydrogen bond in a network structure. Source function calculations established that the present N-H-N hydrogen bond follows the trends observed for negatively charge-assisted hydrogen bonds and low-barrier hydrogen bonds previously established for O-H-O hydrogen bonds. The bonding between the cobalt and cyanide ligands was found to be a typical donor-acceptor bond involving a high-field ligand and a transition metal in a low-spin configuration.