RESUMO
INTRODUCTION: Quantitative parameters for diagnosis of congenital lumbar stenosis (CLS) have yet to be universally accepted. This study establishes parameters for CLS using CT, assessing the influences of patient sex, race, ethnicity, and anthropometric characteristics. METHODS: Interpedicular distance (IPD), pedicle length, canal diameter, and canal area were measured using 1,000 patients between 18 and 35 years of age who were without spinal pathology. RESULTS: Irrespective of disk level, threshold values for CLS were 16.1 mm for IPD, 3.9 mm for pedicle length, 11.5 mm for canal diameter, and 142.5 mm2 for canal area. Notable differences based on patient sex were observed, with men demonstrating larger CLS threshold values with respect to IPD and canal area across all vertebral levels from L1 to L5. Based on patient anthropometric factors, no strong or moderate associations were observed between any spinal measurement and patient height, weight, or body mass index across all levels from L1 to L5. However, notable differences were observed based on patient race and ethnicity from L1 to L5. Asian patients demonstrated the largest pedicle lengths, followed by White, Hispanic, and Black patients in descending order. White patients demonstrated the largest IPD, canal AP diameter, and canal area, followed by Asian, Hispanic, and Black patients in descending order. Black patients demonstrated the smallest values across all anatomic measurements relative to Asian, White, and Hispanic patients. CONCLUSION: This study reports 25,000 measurements of lumbar central canal dimensions to establish quantitative thresholds for the diagnosis of CLS. Although not influenced by patient height, weight, or body mass index as one might intuit, canal dimensions were influenced by patient sex, race, and ethnicity. These findings may help explain differences in predisposition or prevalence of lumbar nerve root compression among patients of different races, which can be important when considering rates of surgery and access to care.
RESUMO
OBJECTIVES: The purpose of the study was to report a step-by-step process of creating artificial caries typodont teeth and to determine the perception and efficacy of their use in preclinical operative training. METHODS: Artificial caries material comprised of commercially available hide glue and chocolate powder for more realistic coloring was embedded into the distolingual of #9 ModuPRO plastic typodont teeth. First-year dental students having no clinical experience in excavating Class III cavity preparations were divided into two groups. Group BA prepared conventional typodont teeth (CTT) first, then artificial caries typodont teeth. Group AB prepared the ACT first, then CTT. The preps were scored employing a rubric used in the operative dentistry course class. A feedback questionnaire was conducted to rate students' satisfaction regarding the use of ACT and CTT. The Mann-Whitney U-test was used to compare the scores between groups ACT-CTT and CTT-ACT and the Chi-Square test was used to evaluate the positive and negative questionnaire responses. RESULTS: The two groups showed no significant difference in grades and no significant changes in their scores regardless of which order they prepped the teeth (P > 0.05). The questionnaire heavily favored the use of artificial caries typodont teeth (P < 0.05). CONCLUSIONS: The artificial caries typodont teeth protocol described in this study was feasible when implemented at the preclinical laboratory instruction level with positive questionnaire feedback from dental students.
RESUMO
BACKGROUND: Ankylosing spondylitis (AS) and diffuse idiopathic skeletal hyperostosis (DISH) are distinct pathological entities that similarly increase the risk of vertebral fractures. Such fractures can be clinically devastating and frequently portend significant neurological injury, thus making their prevention a critical focus. Of particular significance, spinal fractures in patients with AS or DISH carry a considerable risk of mortality, with reports on 1-year injury-related deaths ranging from 24% to 33%. As such, the purpose of this study was to conduct machine learning (ML) analysis to predict postoperative mortality in patients with AS or DISH using the Nationwide Inpatient Sample Healthcare Cost and Utilization Project (HCUP-NIS) database. METHODS: HCUP-NIS was queried to identify adult patients carrying a diagnosis of AS or DISH who were admitted for spinal fractures and underwent subsequent fusion or corpectomy between 2016 and 2018. Predictions of in-hospital mortality in this cohort were then generated by three independent ML algorithms. RESULTS: An in-hospital mortality rate of 5.40% was observed in our selected population, including a rate of 6.35% in patients with AS, 2.81% in patients with DISH, and 8.33% in patients with both diagnoses. Increasing age, hypertension with end-organ complications, spinal cord injury, and cervical spinal fractures each carried considerable predictive importance across the algorithms utilized in our analysis. Predictions were generated with an average area under the curve of 0.758. CONCLUSIONS: This study's application of ML algorithms to predict in-hospital mortality among patients with AS or DISH identified a number of clinical risk factors relevant to this outcome. CLINICAL RELEVANCE: These findings may serve to provide physicians with an awareness of risk factors for in-hospital mortality and, subsequently, guide management and shared decision-making among patients with AS or DISH.
RESUMO
INTRODUCTION: Calcium hydroxide pastes (CHPs), commonly used for disinfecting root canals during endodontic treatment, are generally considered safe. However, accidental extrusions result in minimal injuries and little to no discomfort, except when extruded pastes come into contact with nerve bundles, such as the inferior alveolar nerve. Currently, there is a lack of information about the possible role of specific paste vehicles on the extent of nerve injury. The purpose of this study was to compare the role that paste vehicles, such as water or methylcellulose, may play when nerve fibers are exposed to CHP. METHODS: Isolated sciatic nerves of Sprague-Dawley rats were exposed to either water-based or methylcellulose-based CHP for varying durations of time (30, 60, or 90 minutes). Histopathological changes, including axonal edema, myelin alterations, and loss of cellular outlines, were assessed, and the degrees of changes were compared using chi-square intraclass correlation coefficient tests. RESULTS: Both groups exposed to the pastes demonstrated varying degrees of histopathologic changes, including axonal edema, myelin changes, and loss of cellular outlines, at different exposure times. The water-based calcium hydroxide paste induced these changes more rapidly than the methylcellulose-based paste. Similar patterns were observed in the scanning electron microscopic findings. Exposure time emerged as an important difference in the effects of the 2 pastes. In each of these tests, all observations of water-based paste exposure were rated as moderate to severe, whereas the observed cellular changes (axonal, myelin, and intact cellular outline) were rated as mild to moderate after exposure to methylcellulose-based paste for the same exposure durations. The chi-square tests indicated a statistically significant association between the material and each of the outcomes (axonal changes: χ²15 = 81.0, P < .001; myelin changes: χ²15 = 81.0, P < .001; intact cellular outline, χ²15 = 81.0, P < .001). The intraclass correlation coefficient value was 0.93. CONCLUSIONS: The study demonstrates that axonal and myelin damage increase with longer exposure times, with water-based CHP causing more damage than methylcellulose-based CHP at each time point.
Assuntos
Hidróxido de Cálcio , Água , Animais , Ratos , Hidróxido de Cálcio/efeitos adversos , Ratos Sprague-Dawley , Axônios , Microscopia Eletrônica de Varredura , Metilcelulose , Edema , Irrigantes do Canal Radicular/farmacologiaRESUMO
INTRODUCTION: The efficacy and safety of a single novel electronic pulp sensitivity tester with a transilluminator (PSTT) capable of providing 4 different tests was compared with gold standard (GS) pulp testing methods. METHODS: Four hundred eighty teeth, including 3 from each quadrant and their contralateral and opposing teeth, were randomly assessed using the PSTT or GS methods. Seven days later, the same teeth were assessed using the method not used earlier so that all teeth were evaluated using both methods. Sixty previously root canal-treated teeth, serving as negative controls, were assessed identically to the experimental groups. Results were analyzed using IBM SPSS software (IBM Corp, Armonk, NY) (P < .05). RESULTS: A higher percentage of teeth responded to cold and electricity using GS methods compared with the PSTT (99.4 vs 93.1 and 99.6 vs 97.3, respectively). A lower percentage of teeth responded to heat using the GS method compared with the PSTT (50.0 vs 68.1). Chi-square tests determined differences in the proportion of sensitivity to temperature, and electric testing methods were statistically significant (P < .001 and P = .004, respectively). No difference in the proportion of sensitivity was observed for transillumination. The Wilcoxon signed rank test determined significantly shorter cold testing times using the GS method (P = .024). Shorter testing times were observed using the PSTT for heat (P < .001), electric pulp testing (P = .048), and transillumination (P = .001). The overall PSTT testing time was significantly shorter than the GS testing time (P = .03). Tissue injury was not observed. CONCLUSIONS: The PSTT efficiently and safely provided heat and transillumination for pulpal diagnosis. Improvements are needed to enhance the cold and electric stimulus efficacy.
Assuntos
Teste da Polpa Dentária , Polpa Dentária , Estudos Cross-Over , Teste da Polpa Dentária/métodos , Temperatura , Temperatura BaixaRESUMO
AIM: To evaluate how an institution's values can impact students' intent to practice in underserved areas. MATERIALS AND METHODS: The values of 71 accredited dental schools in the United States were searched and tabulated. The American Dental Education Association (ADEA) survey results were used to tabulate the desire to serve the underserved population before entering dental school and upon graduation. Additionally, responses on the total amount of educational debt on graduation was compiled for LLUSD and all other dental schools. Fisher's exact test was performed to compare the difference between the two cohorts and Wilcoxon test was used to assess difference within the groups. Tests were conducted at an alpha level of 0.05 with SAS v 9.1.3 (SAS Institute, Cary, NC, USA). RESULTS: The top five values of US dental institutions based on frequency were excellence, diversity/inclusion, integrity, innovation, and respect. There was no statistically significant difference between LLUSD and all other dental schools in their desire to serve the underserved community upon graduation (p > 0.05, in all instances). Overall, there was a trend that upon graduation, the desire to serve the underserved had less impact on students' decision-making on their career choices. This drop in the desire to serve the underserved was statistically significant within both cohorts in the year 2021 (p < 0.001). CONCLUSIONS: Dental institutions should focus on better understanding of how their values impact their students' career choices so that they can develop strategies to better align their values with the mission of addressing the dentist shortage in underserved areas. CLINICAL SIGNIFICANCE: Dental institutions' values play a major role in impacting students' career choices upon graduation and should be assessed using metrics that are measurable.
Assuntos
Estudantes de Odontologia , Estudantes de Medicina , Humanos , Estados Unidos , Estudos Transversais , Inquéritos e Questionários , IntençãoRESUMO
PURPOSE: To compare toothpaste tablets containing 0.243% sodium fluoride and a conventional sodium fluoride dentifrice for gingivitis and plaque control over a 2-week period. METHODS: Forty adult participants were randomized into two groups: Toothpaste tablets (Colgate Anywhere Travel Toothpaste Tablets) and conventional dentifrice (Colgate Cavity Protection). A blinded examiner measured the gingival and plaque index at baseline and after 2 weeks. A questionnaire was distributed at the end to determine overall satisfaction of the product used. Statistical analyses were performed separately for the gingival index and plaque index scores. Comparisons of the two treatment groups with respect to baseline and 2-week gingival index and plaque index scores were performed using Mann-Whitney U-test. Within-treatment comparisons of the gingival index and plaque index scores obtained at the 2-week examinations versus baseline were performed using Wilcoxon test. RESULTS: Both groups had statistically significant improvements in plaque control at the 2-week visit (P< 0.05). There was no statistically significant difference between groups for gingival and plaque index at the 2-week visit (P> 0.05). Overall satisfaction for both products were positive while perception on "texture/foaminess" was more negative for toothpaste tablets (P= 0.001). The results showed that toothpaste tablets' short-term performance on gingivitis and plaque control was equivalent to conventional dentifrice while the " texture/foaminess" of toothpaste tablets was found to be less appealing. CLINICAL SIGNIFICANCE: Toothpaste tablets are a relatively new form of toothpaste that can be a viable alternative to conventional dentifrice with the added benefit of an eco-friendly way of maintaining oral hygiene.
Assuntos
Placa Dentária , Dentifrícios , Gengivite , Adulto , Humanos , Fluoreto de Sódio/uso terapêutico , Dentifrícios/uso terapêutico , Cremes Dentais/uso terapêutico , Placa Dentária/prevenção & controle , Gengivite/prevenção & controle , ComprimidosRESUMO
AIM: To evaluate the distribution of caries risk category of patients at a dental institution and determine adherence to providers' recommendations. MATERIALS AND METHODS: A cross-sectional retrospective review of 1,235 patients records that included data collection on demographics, the sum of the number of decayed, missing due to caries, and filled teeth in the permanent teeth (DMFT), presence of frequent snacking, stimulated salivary flow rate, stimulated saliva pH, saliva buffering capacity, biofilm activity, caries risk category, anti-caries prescription accept/decline, and change in the caries risk category. Statistical analysis was carried out through Pearson's Chi-squared test and linear model ANOVA with a significance level of 0.05. RESULTS: Pearson's Chi-squared test showed a statistically significant difference in frequency by risk category (p < 0.001) indicating that patients were skewed toward high and extreme caries risk. Linear model ANOVA showed that higher risk categories were associated with lower salivary flow rates (p = 0.010) and higher biofilm activity (p < 0.001). About, 1 out of 3 patients were reported to have frequent snacking (N = 391, 32%). Frequent snacking patients were more likely to present with higher caries risk assessment (p < 0.001), younger age (p < 0.001), and female (p < 0.001). Despite recommendations from the dental student provider, only 27% accepted the anti-cavity prescriptions while 61% declined the recommendation. CONCLUSION: Distribution of caries risk category is not evenly distributed, but rather skewed toward high and extreme caries risk levels. Despite the identified risks, there is low adherence to the recommendations provided by healthcare providers. The results underscore the necessity for targeted interventions and initiatives aimed at fostering behavioral changes to enhance oral health outcomes. CLINICAL SIGNIFICANCE: There is a high need for targeted interventions and initiatives that promote behavioral changes to enhance oral health outcomes.
Assuntos
Cárie Dentária , Humanos , Feminino , Cárie Dentária/epidemiologia , Cárie Dentária/prevenção & controle , Cariostáticos , Estudos Retrospectivos , Estudos Transversais , Medição de Risco , Índice CPORESUMO
PURPOSE: To evaluate the effects of toothpaste tablets on the gloss and surface roughness of resin-based composite materials and determine the relationship between gloss and roughness. METHODS: Rectangular jigs were designed and printed. Wells (2 mm deep x 7 mm diameter) were filled with Filtek Supreme Ultra A2B, light-cured and polished. A small-area glossmeter was used for gloss (GU) measurements and a profilometer for roughness measurements (Ra) at baseline and after challenge with each toothpaste. An automated tooth-brushing machine was set at 120 strokes/minute for a total of 10,000 strokes to evaluate four test groups with 16 specimens in each group. NC: Brushing with distilled water; TABS: Colgate Anywhere Travel Tooth Tabs; CP: Colgate Cavity Protection Toothpaste and AW: Colgate Whitening Advanced Toothpaste. Kruskal-Wallis test was used to test the difference in gloss and surface roughness among the groups and Pearson correlation was used to compare the relationship between gloss and roughness. RESULTS: There was no statistically significant difference in gloss and roughness among the four groups at baseline. At post-brushing, there was a statistically significant difference among the groups (P< 0.001) with increased roughness and decreased gloss for CP and AW when compared to TABS. There was a statistically significant correlation between post-brushing roughness and post-brushing gloss (P< 0.001, rho: -0.815). Thus, the higher the surface roughness the lower the gloss. CLINICAL SIGNIFICANCE: Toothpaste tablets retain better gloss and roughness of resin-based composite materials when compared to conventional toothpastes.
Assuntos
Polimento Dentário , Cremes Dentais , Materiais Dentários , Resinas Compostas , Escovação Dentária , Propriedades de Superfície , Teste de MateriaisRESUMO
PURPOSE: Spinal epidural lipomatosis is abnormal accumulation of normal fat in the epidural space with weight loss suggested as first-line therapy in select symptomatic patients. However, moderate to large longitudinal studies establishing concordant changes between body mass index and epidural fat are lacking. The purpose of this study was to longitudinally assess this relationship. METHODS: We performed an ancillary study of the Habitual Diet and Avocado Trial. Baseline and six-month abdominal MRIs were analyzed for 98 overweight or obese but otherwise healthy subjects. Dorsal epidural fat volumes in the lumbar spine were measured and correlated with changes in body mass index, changes in visceral fat volume, and demographic information. RESULTS: There was a linear relationship between body mass index changes and epidural fat volume changes with a one-point change in body mass index corresponding to a 45 mm3 change in dorsal epidural fat volume (p < 0.001, 95% CI 31.87 to 76.77) as well as between visceral fat volume changes and epidural fat volume changes (regression coefficient 0.51, p < 0.001, 95% CI 0.22 to 0.47). Age was inversely related with subjects older than 45.7 years tending to lose epidural fat (regression coefficient -0.22, p = 0.025, 95% CI -10.43 to -0.72). CONCLUSION: Changes in spinal dorsal epidural fat volume parallel changes in body mass index and visceral fat, supporting weight loss as initial treatment for uncomplicated obesity-associated spinal epidural lipomatosis.
Assuntos
Espaço Epidural , Lipomatose , Humanos , Pessoa de Meia-Idade , Índice de Massa Corporal , Estudos Longitudinais , Espaço Epidural/diagnóstico por imagem , Obesidade/complicações , Redução de Peso , Lipomatose/diagnóstico por imagem , Lipomatose/complicações , Imageamento por Ressonância MagnéticaRESUMO
Abstract A 3-dimensional (3D) printed custom-frame can improve the peripheral seal of readily available surgical/medical masks. This study aimed to assess the acceptance of a 3D-printed custom-frame with the American Society for Testing and Materials (ASTM) surgical/medical masks and the use of a face shield. A total of 206 subjects from a dental school participated, who answered a multiple-choice questionnaire. Participants received an invitation through the institutional email of the school via Qualtrics platform. 3D printed custom-frames were fabricated for each participant. According to their response, participants were divided into 4 groups: mask only (M), mask and frame (MF), mask and face shield (MFS), and all 3 personal protective equipment (MFFS). Data was analyzed in absolute and relative frequency. The acceptance of a 3D-printed custom-frame in the group MFFS varied between ''poor''/''very poor'' (44.7%). It allowed ''good'' performance of routine procedures (40.3%), but ''poor'' visual quality (48.1%). Musculoskeletal tolerance and ease to perform movements were adequate. There was no interference in olfactory sensitivity (44.7%) or in the ability to breathe (34.5%). Finally, it showed "moderate pain" (48.1%) on the ear and "no pain" (38.9%) on the head. The 3D-printed custom-frame adapted to ASTM surgical/medical face masks showed reasonable tolerance. Side effects of ear pain ranging in degrees were noted. Further research is indicated to evaluate safety, comfort, compliance, side effects, and occupational hazards of long-term use of enhanced PPE recommendations.Avoiding the recurrent outbreaks of COVID-19, the use of PPE by the public is necessary. Improper PPE use is a major source of concern for human and environmental health. Preventing such activities can be done by following steps involved in PPE disposals or by getting a new way to re-use such as improving peripherical sealing. Our work highlights that a custom-frame can improve protection, without adverse effects.
Resumen El sellado periférico de las máscaras médicas/quirúrgicas puede ser mejorado fácilmente mediante un marco personalizado impreso en 3 dimensiones (3D). Este estudio tuvo como objetivo evaluar la aceptación de un marco personalizado impreso en 3D cuando usado en combinacion con máscaras médicas/quirúrgicas de la Sociedad Estadounidense para Pruebas y Materiales (ASTM) asi como con el uso de protector facial. Participaron un total de 206 sujetos de una facultad de odontología, quienes respondieron un cuestionario de opción múltiple. Los participantes recibieron una invitación a través del correo institucional de la escuela a través de la plataforma Qualtrics. Se fabricaron marcos personalizados impresos en 3D para cada participante. Según su respuesta, los participantes se dividieron en 4 grupos: solo máscara (M), máscara y marco (MF), máscara y protector facial (MFS) y los 3 equipos de protección personal (MFFS). Los datos se analizaron en frecuencia absoluta y relativa. La aceptación de un marco personalizado impreso en 3D en el grupo MFFS varió entre ''pobre''/''muy pobre'' (44,7%). Permitió un ''buen'' desempeño de los procedimientos de rutina (40,3%), pero una ''mala'' calidad visual (48,1%). La tolerancia musculoesquelética y la facilidad para realizar movimientos fueron adecuadas. No hubo interferencia en la sensibilidad olfativa (44,7%) ni en la capacidad de respirar (34,5%). Finalmente, mostró "dolor moderado" (48,1%) en el oído y "sin dolor" (38,9%) en la cabeza. El marco personalizado impreso en 3D adaptado a las máscaras faciales quirúrgicas/ médicas de ASTM mostró una tolerancia razonable. Se observaron efectos secundarios de dolor de oído que variaron en grados. Estudios futuros deben evaluar la seguridad, la comodidad, efectos secundarios y los riesgos laborales del uso a largo plazo para este tipo de combinación. Para evitar los brotes recurrentes de COVID-19, es necesario el uso de equipamento personal de protección (EPP) por parte del público. El uso inadecuado de EPP es una fuente importante de preocupación para la salud humana y ambiental. La prevención de tales actividades se puede hacer siguiendo los pasos involucrados en la eliminación de EPP o obteniendo una nueva forma de reutilización, como mejorar el sellado periférico. Nuestro trabajo resalta que un marco personalizado puede mejorar la proteccion, sin afectos adversos.
Assuntos
Humanos , Masculino , Feminino , Adulto , Pessoa de Meia-Idade , Idoso , Impressão Tridimensional/instrumentação , Equipamento de Proteção Individual , Máscaras , COVID-19/prevenção & controleRESUMO
PURPOSE: To evaluate the microbial air quality during dental clinical procedures in a large clinical setting with increasing patient capacity. METHODS: This was a single-center, observational study design evaluating the microbial air quality and aerosol distribution during normal clinical sessions at 5% (sessions 1 and 2) and at > 50% (session 3) treatment capacity of dental aerosol generating procedures. Sessions 1 and 2 were evaluated on the same day with a 30-minute fallow time between the sessions. Session 3 was evaluated on a separate day. For each session, passive air-sampling technique was performed for three collection periods: baseline, treatment, and post-treatment. Blood agar plates were collected and incubated at 37°C for 48 hours. Colonies were counted using an automatic colony counter. Mean colony forming units (CFU) per plate were converted to CFU/m²/h. RESULTS: Kruskal Wallis test was performed to compare the mean CFU/m²/h between the clinic sessions. Statistically significant differences were observed between sessions 1 and 2 (P< 0.05), but not between sessions 2 and 3 (P> 0.05). Combining all clinical sessions, the mean CFU/m²/h were 977 (baseline), 873 (treatment), and 1,631 (post-treatment) for the collection periods. A decrease-to-increase CFU/m²/h trend was observed from baseline to treatment, and from treatment to post-treatment that was observed for all clinic sessions and was irrespective to treatment capacity. Higher amounts of CFU/m²/h were found near the air exhaust outlets for all three clinic sessions. Microbial aerosol distribution is most likely due to the positions and power levels of the air inlets and outlets, and to a lesser extent with patient treatment capacity. CLINICAL SIGNIFICANCE: Dental clinics should be designed and optimized to minimize the risk of airborne transmissions. The results of this study emphasize the need to evaluate dental clinic ventilation systems.
Assuntos
Microbiologia do Ar , Poluição do Ar , Humanos , Clínicas Odontológicas , Ágar , Aerossóis , Contagem de Colônia MicrobianaRESUMO
AIM: The purpose of this study was to assess the overall satisfaction of a new learning experience and evaluate the outcome of LLUSD's educational teledentistry initiative through a survey based on Kirkpatrick's multidimensional model of training evaluation. MATERIALS AND METHODS: An IRB application was approved (#5210385) for a cross-sectional study that included Loma Linda University School of Dentistry (LLUSD) dental students of the class of 2022 and 2023. The 9-question survey consisted of three sections. The first section included demographic questions on gender and the graduating class. The second section was related to perceived teaching effectiveness, attitude, behavior, and significance. The third section included an open-ended question. The survey was distributed by three student investigators. Descriptive statistics were calculated, and categorical variables were compared using the Chi-squared test (χ2 test). RESULTS: The perceived teaching effectiveness of the newly implemented educational initiative was high for increasing the ability to communicate with patients and for screening and identifying the need for referrals. A majority of students believed that teledentistry is an important means to improve patients' access to dental care and that the School has been providing a good educational environment in providing teledentistry sessions to patients. There were no significant differences in the frequencies of positive and negative responses to all questions (N = 6) by gender and by class (p >0.05, in all instances). CONCLUSIONS: Teledentistry eVisits allowed the continuation of patient contact and initial assimilation of patient information. There is potential for this educational initiative to be more actively and comprehensively implemented in the future. CLINICAL SIGNIFICANCE: New educational initiatives allow the continuation of patient contact that will ensure that students will graduate as competent oral health care providers despite challenges imposed by the pandemic.
Assuntos
COVID-19 , COVID-19/epidemiologia , Estudos Transversais , Humanos , Pandemias , Estudantes , Inquéritos e QuestionáriosRESUMO
AIM: The purpose of the study was two-fold. First, to evaluate students' learning style and relate it to their academic performance. Second, to highlight changes implemented in the tooth morphology (TOMO) course as a response to the coronavirus disease-2019 (COVID-19) pandemic. MATERIALS AND METHODS: The study was performed during 2021-2022 with 101 dental students. Didactic lectures were delivered online and students challenged with nine quizzes and one final examination. Didactic score was calculated by averaging the scores of quizzes and the final exam. Lab score was a combination of five lab projects and the final competency. At course completion, students received a survey on their learning style and how they would like to receive feedback. Kruskal-Wallis test was used to assess differences in didactic and lab scores among groups. RESULTS: Many students perceived themselves as visual learners (39%) followed by kinesthetic (24%), aural (19%), and reader (18%). There was no difference among learning style groups in performance of didactic (p = 0.340) and lab scores (p = 0.845). Students preferred that the instructor talks them through the questions for feedback on quizzes (41%) while they preferred demonstrations when receiving feedback on their wax-ups (51%). Most students (75%) preferred a TOMO teacher that uses demonstrations. 2020-2021 marked the year of the pandemic where all lectures were delivered online and waxing projects were performed at-home. A postpandemic transformation occurred during 2021-2022, reverting to conventional in-person lab sessions while keeping online didactic lectures. CONCLUSION: We conclude that TOMO should be delivered by using various teaching styles rather than focusing on a single method while providing more demonstrations. CLINICAL SIGNIFICANCE: Teaching tooth morphology to the new generation type of learners efficiently will affect the clinical work of dental graduates.
Assuntos
COVID-19 , COVID-19/epidemiologia , Estudos Transversais , Humanos , Estudantes , Inquéritos e QuestionáriosRESUMO
BACKGROUND: Short-term side effects related to mRNA vaccines against SARS-CoV-2 are frequent and bothersome, with the potential to disrupt work duties and impact future vaccine decision-making. OBJECTIVE: To identify factors more likely to lead to vaccine-associated work disruption, employee absenteeism, and future vaccine reluctance among healthcare workers (HCWs). HYPOTHESIS: Side effects related to COVID vaccination: 1- frequently disrupt HCW duties, 2- result in a significant proportion of HCW absenteeism, 3- contribute to uncertainty about future booster vaccination, 4- vary based on certain demographic, socioeconomic, occupational, and vaccine-related factors. METHODS: Using an anonymous, voluntary electronic survey, we obtained responses from a large, heterogeneous sample of COVID-19-vaccinated HCWs in two healthcare systems in Southern California. Descriptive statistics and regression models were utilized to evaluate the research questions. RESULTS: Among 2,103 vaccinated HCWs, 579 (27.5%) reported that vaccine-related symptoms disrupted their professional responsibilities, and 380 (18.1%) missed work as a result. Independent predictors for absenteeism included experiencing generalized and work-disruptive symptoms, and receiving the Moderna vaccine [OR = 1.77 (95% CI = 1.33 - 2.36), p < 0.001]. Physicians were less likely to miss work due to side effects (6.7% vs 21.2% for all other HCWs, p < 0.001). Independent predictors of reluctance toward future booster vaccination included lower education level, younger age, having received the Moderna vaccine, and missing work due to vaccine-related symptoms. CONCLUSION: Symptoms related to mRNA vaccinations against SARS-CoV-2 may frequently disrupt work duties, lead to absenteeism, and impact future vaccine decision-making. This may be more common in Moderna recipients and less likely among physicians. Accordingly, health employers should schedule future booster vaccination cycles to minimize loss of work productivity.
Assuntos
COVID-19 , Efeitos Colaterais e Reações Adversas Relacionados a Medicamentos , Absenteísmo , COVID-19/prevenção & controle , Vacinas contra COVID-19/efeitos adversos , Pessoal de Saúde , Humanos , SARS-CoV-2 , Vacinação/efeitos adversosRESUMO
Few clinical datasets exist in dentistry to conduct secondary research. Hence, a novel dental data repository called BigMouth was developed, which has grown to include 11 academic institutions contributing Electronic Health Record data on over 4.5 million patients. The primary purpose for BigMouth is to serve as a high-quality resource for rapidly conducting oral health-related research. BigMouth allows for assessing the oral health status of a diverse US patient population; provides rationale and evidence for new oral health care delivery modes; and embraces the specific oral health research education mission. A data governance framework that encouraged data sharing while controlling contributed data was initially developed. This transformed over time into a mature framework, including a fee schedule for data requests and allowing access to researchers from noncontributing institutions. Adoption of BigMouth helps to foster new collaborations between clinical, epidemiological, statistical, and informatics experts and provides an additional venue for professional development.
Assuntos
Registros Eletrônicos de Saúde , Saúde Bucal , Atenção à Saúde , HumanosRESUMO
AIM: The purpose was to assess dental students' knowledge, attitude, and confidence toward evidence-based dentistry in five graduating Doctor of Dental Surgery (DDS) classes. MATERIALS AND METHODS: All dental students (class of 2019, 2020, 2021, 2022, and 2023) enrolled in the D3 research design course were required to take a pre-Knowledge, Attitude, and Confidence in Evidence-based Dentistry (KACE) survey. On completion of the 11-week course, a post-KACE survey was distributed to compare the differences in the three domains of evidence-based dentistry (EBD). For the knowledge domain, the responses from the 10 questions were converted to either correct (1) or wrong (0) so that the compiled scores could range from 0 to 10. The attitudes and confidence domains used a five-point Likert scale. The compiled attitude score was a sum of the responses from 10 questions yielding a range from 10 to 50. For confidence, the compiled score ranged from 6 to 30. RESULTS: The mean knowledge scores of all classes together before and after training were 2.7 and 4.4, respectively. Overall, there was a statistically significant difference between pre- and post-knowledge indicating an improvement in knowledge associated with the training (p < 0.001). The mean attitudes of all classes together before and after the training were 35.3 and 37.2, respectively. Overall, there was a statistically significant improvement in attitude (p < 0.001). The values of mean confidence of all classes together before and after the training were 15.3 and 19.5, respectively. Overall, there was a statistically significant improvement in confidence (p < 0.001). CONCLUSIONS: A dental curriculum emphasizing Evidence-based practice (EBD) resulted in increased knowledge acquisition, improved attitude, and confidence toward EBD of dental students. CLINICAL SIGNIFICANCE: Educational initiatives emphasizing evidence-based dentistry increase students' knowledge acquisition, improved attitude, and confidence toward EBD that may also translate to active implementation of EBD in their future practices.
Assuntos
Atitude do Pessoal de Saúde , Estudantes de Odontologia , Humanos , Estudos Retrospectivos , Odontologia Baseada em Evidências/educação , Conhecimentos, Atitudes e Prática em Saúde , Currículo , Inquéritos e QuestionáriosRESUMO
The purpose of this study was to compare heat and sound generated during implant osteotomy when different types of drill were used in artificial bone and bovine bone blocks. A total of 80 implant osteotomies were formed using 4 implant drilling systems: N1 (OsseoShaper) (Nobel), NobelActive (Nobel), V3 (MIS), and BLX (Straumann) in both artificial bone and bovine bone blocks. Thermocouple probes were used to record temperature change at the depths of 5.0 mm and 13.0 mm of each implant osteotomy formed by the final drill. In addition, thermographic images, drilling sound, and drilling time were recorded and evaluated. Statistical analyses were performed at α = 0.05. The mean temperature changes as recorded by thermocouple probes and thermocamera were significantly lower in OsseoShaper than most other drill-bone combinations (P < .05). The mean drilling times and sound generation for OsseoShaper were significantly higher and lower than most other drill-bone combinations (P < .05), respectively. Minimal heat and sound generation can be expected when implant osteotomies are performed using OsseoShaper at a low rotational speed (50 rpm) even without irrigation. However, extended drilling time is required.
Assuntos
Implantes Dentários , Temperatura Alta , Animais , Osso e Ossos , Bovinos , Implantação Dentária Endóssea , Desenho de Equipamento , OsteotomiaRESUMO
The purpose of this study is to compare the exposure rate of 3 different barrier types after a guided-bone regeneration procedure as well as to compare the percentage grafted bone dimensional loss with and without exposed barriers. Patient records from September 2007 to May 2015 were reviewed to identify subjects who had received a bone graft followed by implant placement procedure after the graft had completely healed. The subjects were divided into 3 groups: (1) resorbable barrier, (2) nonresorbable barrier, and (3) titanium-mesh barrier. Incidences of barrier exposure were recorded. Cone-beam computerized tomography images before treatment (T0), right after grafting (T1), and after healing (T2) were used to determine the percentage of grafted bone dimensional loss and am quantitative amount of grafted bone remaining (mm2). Three cross-sectioned areas, at 1-mm apart, of preplanned implant positions at the grafted site were measured using cone-beam computerized tomography to calculate the remaining grafted bone and grafted bone dimensional change. The exposure rate of all guided bone regeneration was 36.9%. The exposure rate of the resorbable barrier (23.3%) was significantly lower than titanium mesh (68.9%) and nonresorbable (72.7%; χ2, P < .001). The results of this study revealed that barrier types have a significant effect on the exposure rate. There was also a significant difference in grafted bone dimensional loss between sites with barrier exposure (58.3%) and sites with no barrier exposure (44.1%) during the healing period (Mann-Whitney U test, P = .008).
Assuntos
Aumento do Rebordo Alveolar , Titânio , Aumento do Rebordo Alveolar/métodos , Regeneração Óssea , Transplante Ósseo/métodos , Regeneração Tecidual Guiada Periodontal/métodos , Humanos , Estudos RetrospectivosRESUMO
In this study, we evaluated the status of and attitudes toward COVID-19 vaccination of healthcare workers in two major hospital systems (academic and private) in Southern California. Responses were collected via an anonymous and voluntary survey from a total of 2491 participants, including nurses, physicians, other allied health professionals, and administrators. Among the 2491 participants that had been offered the vaccine at the time of the study, 2103 (84%) were vaccinated. The bulk of the participants were middle-aged college-educated White (73%), non-Hispanic women (77%), and nursing was the most represented medical occupation (35%). Political affiliation, education level, and income were shown to be significant factors associated with vaccination status. Our data suggest that the current allocation of healthcare workers into dichotomous groups such as "anti-vaccine vs. pro-vaccine" may be inadequate in accurately tailoring vaccine uptake interventions. We found that healthcare workers that have yet to receive the COVID-19 vaccine likely belong to one of four categories: the misinformed, the undecided, the uninformed, or the unconcerned. This diversity in vaccine hesitancy among healthcare workers highlights the importance of targeted intervention to increase vaccine confidence. Regardless of governmental vaccine mandates, addressing the root causes contributing to vaccine hesitancy continues to be of utmost importance.