Effect of different surface roughening treatment on polyether ether ketone and acrylic resin bonding: A pilot study.

BACKGROUND: As polyether ether ketone (PEEK) is a relatively new material in dentistry, its bonding properties with regard to dental acrylic base materials are not fully known. To ensure the long-term success of removable dentures with a PEEK framework, the base materials must be well bonded to each other. OBJECTIVES: The study aimed to investigate the effects of different kinds of surface roughening treatment on PEEK and acrylic resin bonding. MATERIAL AND METHODS: Eighty PEEK specimens (N = 80) were randomly divided into 5 groups (n = 16 per group) and subjected to various surface roughening treatment (control, grinding, sandblasting, tribochemical silica coating (CoJet), and sulfuric acid etching). Heat-polymerized acrylic resin was applied to the treated surfaces of the PEEK specimens. The shear bond strength (SBS) test, environmental scanning electron microscopy (ESEM) analysis and three-dimensional (3D) surface topography analysis were performed. The statistical analysis of the data was conducted using the analysis of variance (ANOVA) and Tukey's multiple comparison test. RESULTS: The one-way ANOVA showed significant differences in the SBS values between the groups (p = 0.001). Sandblasting, tribochemical silica coating and sulfuric acid etching resulted in high SBS values (p = 0.001). The highest SBS values were observed in the sulfuric acid etching group (8.83 ±3.63 MPa), while the lowest SBS values were observed in the control group (3.33 ±2.50 MPa). CONCLUSIONS: The additional roughening treatment applied to the PEEK surface increases the bond strength with heat-polymerized acrylic resin.

Effects of different polishing procedures on the surface roughness and hardness of polyether ether ketone (PEEK) / Efecto de diferentes procedimientos de pulido en la rugosidad y dureza de superficie de un material a base de poliéter éter acetona (PEEK)

ABSTRACT: There is insufficient information about the chairside polishing methods of polyether ether ketone material. Therefore, it is aimed in this study to investigate the effects of different polishing processes on polyether ether ketone surface roughness and hardness. A total of 66 disc-shaped specimens made of polyether ether ketone were used in this study. The specimens were polished conventionally and randomly divided into three groups (n=22). One group was designated as the control group, and no further treatment was applied. In the other two groups, the specimens' surfaces were abraded with diamond burs and polished using two different polishing kits. Their surface roughness and Vickers hardness were measured, and environmental scanning electron microscopy and atomic force microscopy examinations were performed. The data were statistically analysed using analysis of variance and Tukey's honest significant difference test (α=0.05). There were no statistically significant differences between the control and polishing kit groups in terms of either surface roughness or Vickers hardness (p>0.05). The polishing kits can be used reliably and effectively for polishing polyether ether ketone materials.

RESUMEN: No existe información suficiente sobre los métodos de pulido del material poliéter éter cetona. Por tanto, este estudio tiene como objetivo evaluar el efecto de diferentes procedimientos de pulido sobre la rugosidad y dureza de superficie de un material a base de poliéter éter acetona. Un total de 66 muestras en forma de disco fueron realizadas. Los especímenes fueron divididos en tres grupos (n=22). Un grupo fue designado como grupo de control, siendo que no se aplicó ningún tratamiento. En los otros dos grupos, las superficies de las muestras se lijaron con fresas de diamante y se pulieron con dos kits de pulido diferentes. Se investigó la rugosidad de superficie y la dureza Vickers en los diferentes grupos. También fueron evaluadas muestras representativas en microscopía electrónica de barrido y microscopía de fuerza atómica. Los datos se analizaron estadísticamente mediante el análisis de varianza (ANOVA) y el método de Tukey (α=0.05). No hubo diferencias estadísticamente significativas entre los grupos en términos de rugosidad de superficie o Dureza Vickers (p>0,05). Los kits de pulido se pueden utilizar de forma eficaz para el pulido de materiales a base de poliéter éter acetona.

Effect of different bleaching agents on the surface roughness and color stability of feldspathic porcelain / Efeito de diferentes agentes de clareamento na rugosidade superficial e estabilidade de cor da porcelana feldspática

Objective: The aim of this study was to evaluate the effect of different bleaching agents on the surface roughness and color stability of feldspathic porcelain. Material and Methods: In this study, totally 40 discshaped Noritake and Ceramco 3 feldspathic porcelain and two bleaching agents (Opalescence Boost and Opalescence Pf) were used. Bleaching agents were exposed to specimens according to their protocol. Then, the surface roughness of the specimens was evaluated with profilometer and the color of the specimens was recorded by colorimeter. Statistical analysis of the data was performed with IBM SPSS Statistics 20. Results: The results showed that that there were statistically significant differences between the bleaching agents on the surface roughness of feldspathic porcelain (p0.05). Conclusion: The obtained data presented that the bleaching agents increased the surface roughness and not affect the color stability of the feldspathic porcelain. (AU)

Objetivo: O objetivo deste estudo foi avaliar o efeito de diferentes agentes clareadores sobre a rugosidade superficial e estabilidade de cor da porcelana feldspática. Material e Métodos: Neste estudo, foram utilizados 40 porcelanas feldspáticas Noritake e Ceramco 3, em forma de disco, e dois agentes clareadores (Opalescence Boost e Opalescence Pf). Os agentes clareadores foram expostos às amostras de acordo com seu protocolo. Em seguida, a rugosidade superficial dos corpos de prova foi avaliada com perfilômetro e a cor dos corpos de prova foi registrada por colorímetro. A análise estatística dos dados foi realizada com o IBM SPSS Statistics 20. Resultados: Os resultados mostraram que houveram diferenças estatisticamente significantes entre os agentes clareadores na rugosidade superficial da porcelana feldspática (p 0,05). Conclusão: Os dados obtidos mostraram que os agentes clareadores aumentaram a rugosidade superficial e não afetaram a estabilidade de cor da porcelana feldspática.(AU)