RESUMO
The analysis of the shift in photoluminescence emission for a blend of polyvinylcarbazole and acrylonitrile derivative compounds is reported. The small-molecule compounds have different functional groups, phenyl, pyridine, or methyl phenyl, attached to an acrylonitrile group. According to the functional group, the blue emission for pure dye shifts to green or yellowish in the blend film. Several PVK:dye ratios from 0:100 to 20:80 were used for film deposition. The film morphology was analyzed by atomic force microscopy; for low dye content, homogeneous films were achieved. However, aggregates of several micrometers are formed on the surface of films with higher dye concentrations. The shift in emission occurs only with PVK, and for a non-conjugated matrix such as polystyrene, the emission remains unchanged. The interaction of dyes with PVK leading to change in emission was also achieved by grinding dye and polymer. Results showed that shifts in emission could come from exciplex formation along with changes in dye intermolecular interactions. The blend films were highly transparent in the visible spectra due to the absorption in the UV region for dye and matrix. The films with ratio PVK: dye ratio 80:20 was used as active layer in OLEDs.
RESUMO
The optical charge-transfer (CT) property and the crystal structure of (Z)-4-(1-cyano-2-(2,4,5-trimethoxyphenyl)vinyl)pyridin-1-ium chloride monohydrate salt (I), which belongs to an acrylonitrile family, was studied. The title salt, I, was characterized using different spectroscopy techniques and a single-crystal X-ray diffraction study combined with quantum chemical computations. The results showed that the color properties of I are determined by the CT, changes in bandgap, optical absorption, and various non-covalent interactions. The HOMO-LUMO energy gaps are 5.41 eV and 5.23 eV for the precursor and salt, respectively. It was demonstrated that π-π stacking interactions lead to the formation of intercalated dimers and donor-acceptor interactions assisted by hydrogen bonds; the dimers and interactions are different between the precursor and the salt. The cation moiety is mainly stabilized by N(1)+-H···Cl, and the anion is predominantly stabilized by strong O(1W)- H⯠Cl- bonds as well as the hydrogen bonds with the MeO group O(2W)-Hâ¯O(1) and O(2W)-Hâ¯O(1W). The charge transfer between cation and anion moieties in the structure is established through NBO analysis.
RESUMO
Early warning and response are key to tackle emerging and acute public health risks globally. Therefore, the World Health Organization (WHO) has implemented a robust approach to public health intelligence (PHI) for the global detection, verification and risk assessment of acute public health threats. WHO's PHI operations are underpinned by the International Health Regulations (2005), which require that countries strengthen surveillance efforts, and assess, notify and verify events that may constitute a public health emergency of international concern (PHEIC). PHI activities at WHO are conducted systematically at WHO's headquarters and all six regional offices continuously, throughout every day of the year. We describe four interlinked steps; detection, verification, risk assessment, and reporting and dissemination. For PHI operations, a diverse and interdisciplinary workforce is needed. Overall, PHI is a key feature of the global health architecture and will only become more prominent as the world faces increasing public health threats.
RESUMO
A single crystal X-ray diffraction analysis was performed on two positional isomers (m-tolyl and p-tolyl) of acrylonitrile derivatives, namely, (Z)-3-(4-(pyridin-2-yl) phenyl)-2-(m-tolyl) acrylonitrile (1) and (Z)-3-(4-(pyridin-2-yl)phenyl)-2-(p-tolyl) acrylonitrile (2). Compound 1 crystallized in the monoclinic P21/n space group with two crystallographically independent molecules. Compound 2 also possesses two crystallographically independent molecules and crystallized in the triclinic P-1 space group. The Hirshfeld surface analysis revealed that, in both isomers, intermolecular Hâ â â H/C/N contacts contribute significantly to the crystal packing. More than 40% of the contribution arises from intermolecular C-Hâ â â C(π) contacts. In both compounds, the relative contribution of these contacts is comparable, indicating that the positional isomeric effects are marginal. The structures in which these isomers are arranged in the solid state are very similar, and the lattice energies are also comparable between the isomers. The Coulomb-London-Pauli-PIXEL (CLP-PIXEL) energy analysis identified the energetically significant dimers. The strength of the intra- and intermolecular interactions was evaluated using the quantum theory of atoms in molecules approach. The UV-Vis absorbance in three different solvents (chloroform, ethanol, and ethyl acetate) for isomers 1 and 2 are very similar. This result is in good agreement with the time-dependent density-functional theory (TD-DFT) calculations.
RESUMO
Collaborative, One Health approaches support governments to effectively prevent, detect and respond to emerging health challenges, such as zoonotic diseases, that arise at the human-animal-environmental interfaces. To overcome these challenges, operational and outcome-oriented tools that enable animal health and human health services to work specifically on their collaboration are required. While international capacity and assessment frameworks such as the IHR-MEF (International Health Regulations-Monitoring and Evaluation Framework) and the OIE PVS (Performance of Veterinary Services) Pathway exist, a tool and process that could assess and strengthen the interactions between human and animal health sectors was needed. Through a series of six phased pilots, the IHR-PVS National Bridging Workshop (NBW) method was developed and refined. The NBW process gathers human and animal health stakeholders and follows seven sessions, scheduled across three days. The outputs from each session build towards the next one, following a structured process that goes from gap identification to joint planning of corrective measures. The NBW process allows human and animal health sector representatives to jointly identify actions that support collaboration while advancing evaluation goals identified through the IHR-MEF and the OIE PVS Pathway. By integrating sector-specific and collaborative goals, the NBWs help countries in creating a realistic, concrete and practical joint road map for enhanced compliance to international standards as well as strengthened preparedness and response for health security at the human-animal interface.
Assuntos
Saúde Global , Objetivos , Cooperação Internacional , Regulamento Sanitário Internacional , Saúde Pública , Animais , Surtos de Doenças/prevenção & controle , Humanos , ZoonosesRESUMO
The compounds I (Z)-2-(phenyl)-3-(2,4,5-trimethoxyphenyl)acrylonitrile with one side (2,4,5-MeO-), one symmetrical (2Z,2'Z)-2,2'-(1,4-phenylene)bis(3-(2,4,5-trimethoxyphenyl)acrylonitrile), II (both sides with (2,4,5-MeO-), and three positional isomers with pyridine (Z)-2-(pyridin-2- 3, or 4-yl)-3-(2,4,5-trimethoxyphenyl)acrylonitrile, III-V were synthetized and characterized by UV-Vis, fluorescence, IR, H1-NMR, and EI mass spectrometry as well as single crystal X-ray diffraction (SCXRD). The optical properties were strongly influenced by the solvent (hyperchromic and hypochromic shift), which were compared with the solid state. According to the solvatochromism theory, the excited-state (µe) and ground-state (µg) dipole moments were calculated based on the variation of Stokes shift with the solvent's relative permittivity, refractive index, and polarity parameters. SCXRD analyses revealed that the compounds I and II crystallized in the monoclinic system with the space group, P21/n and P21/c, respectively, and with Z = 4 and 2. III, IV, and V crystallized in space groups: orthorhombic, Pbca; triclinic, P-1; and monoclinic, P21 with Z = 1, 2, and 2, respectively. The intermolecular interactions for compounds I-V were investigated using the CCDC Mercury software and their energies were quantified using PIXEL. The density of states (DOS), molecular electrostatic potential surfaces (MEPS), and natural bond orbitals (NBO) of the compounds were determined to evaluate the photophysical properties.
RESUMO
The emergence of COVID-19 spurred the formation of myriad teams to tackle every conceivable aspect of the virus and thwart its spread. Enabled by global digital connectedness, collaboration has become a constant theme throughout the pandemic, resulting in the expedition of the scientific process (including vaccine development), rapid consolidation of global outbreak data and statistics, and experimentation with novel partnerships. To document the evolution of these collaborative efforts, the authors collected illustrative examples as the pandemic unfolded, supplemented with publications from the JMIR COVID-19 Special Issue. Over 60 projects rooted in collaboration are categorized into five main themes: knowledge dissemination, data propagation, crowdsourcing, artificial intelligence, and hardware design and development. They highlight the numerous ways that citizens, industry professionals, researchers, and academics have come together worldwide to consolidate information and produce products to combat the COVID-19 pandemic. Initially, researchers and citizen scientists scrambled to access quality data within an overwhelming quantity of information. As global curated data sets emerged, derivative works such as visualizations or models were developed that depended on consistent data and would fail when there were unanticipated changes. Crowdsourcing was used to collect and analyze data, aid in contact tracing, and produce personal protective equipment by sharing open designs for 3D printing. An international consortium of entrepreneurs and researchers created a ventilator based on an open-source design. A coalition of nongovernmental organizations and governmental organizations, led by the White House Office of Science and Technology Policy, created a shared open resource of over 200,000 research publications about COVID-19 and subsequently offered cash prizes for the best solutions to 17 key questions involving artificial intelligence. A thread of collaboration weaved throughout the pandemic response, which will shape future efforts. Novel partnerships will cross boundaries to create better processes, products, and solutions to consequential societal challenges.
Assuntos
COVID-19/prevenção & controle , Comportamento Cooperativo , Difusão de Inovações , Pandemias/prevenção & controle , COVID-19/epidemiologia , HumanosRESUMO
OBJECTIVE: To describe the epidemiological, phenotypical and genetic characteristics of clinical isolates carrying the optrA gene identified in antimicrobial resistance surveillance by the laboratory of the National Institute of Health of Colombia. METHODS: Between October 2014 and February 2019, 25 isolates of Enterococcus spp. resistant to linezolid were received. Antimicrobial identification and sensitivity were determined using Vitek 2 and the minimum inhibitory concentration (MIC) to linezolid was established with E-test. The optrA gene was detected by PCR, and the genetic diversity of optrA-positive isolates was tested with Diversilab®. Six isolates were selected to perform whole genome sequencing. RESULTS: The optrA gene was confirmed in 23/25 isolates of E. faecalis from seven departments in Colombia. The isolates presented a MIC to linezolid between 8 and >256µg/mL. Typing by Diversilab® showed a wide genetic variability. All the isolates analyzed by whole genome sequencing showed the resistance genes fexA, ermB, lsaA, tet(M), tet(L) and dfrG in addition to optrA and were negative for other mechanisms of resistance to linezolid. Three type sequences and three optrA variants were identified: ST16 (optrA-2), ST476 (optrA-5) and ST618 (optrA-6). The genetic environment of the optrA-2 (ST16) isolates presented the impB, fex, optrA segment, associated with plasmid, while in two isolates (optrA-6 and optrA-5) the transferable chromosomal element Tn6674-like was found. CONCLUSION: OptrA-positive clinical isolates present a high genetic diversity, with different optrA clones and variants related to two types of structures and different mobile genetic elements.
RESUMO
PulseNet Latin America and Caribbean (PNLAC) was established in 2003 and is one of seven Regional networks within PulseNet International. The main objectives of the network are to strengthen national and regional laboratory-based foodborne disease surveillance for early detection and investigation of outbreaks to setup control and prevention strategies in contribution to Public Health. Participants perform standardized pulsed-field gel electrophoresis (PFGE) protocols and analysis. For functioning, it is important for the network, the development of national and regional databases (RDBs) and the communication between countries, regionally and internationally. Metadata from over 8600 cases/outbreaks are profiled and isolated by PFGE and are incorporated into the RDB, hosted by the Pan American Health Organization. Currently PNLAC is moving toward whole-genome sequencing to use as a complementary strategy for surveillance. The aim of this article was to describe the experience of the construction of PNLAC, and its contribution to the surveillance of the foodborne diseases at the country and regional levels.
Assuntos
Microbiologia de Alimentos , Doenças Transmitidas por Alimentos/epidemiologia , Doenças Transmitidas por Alimentos/microbiologia , Vigilância em Saúde Pública , Técnicas de Tipagem Bacteriana , Região do Caribe/epidemiologia , DNA Bacteriano/análise , Bases de Dados Factuais , Surtos de Doenças/prevenção & controle , Eletroforese em Gel de Campo Pulsado , Humanos , Laboratórios , América Latina/epidemiologia , Sequenciamento Completo do GenomaRESUMO
Experimental and theoretical insights into the nature of intermolecular interactions and their effect on optical properties of 1-allyl-4-(1-cyano-2-(4-dialkylaminophenyl)vinyl)pyridin-1-ium bromide salts (I and II) are reported. A comparison of optical properties in solution and in the solid-state of the salts (I and II) with their precursors (Ia and IIa) is made. The experimental absorption maxima (λmax) in CHCl3 is at 528â nm for I and at 542â nm for II, and a strong bathochromic shift of â¼110â nm is observed for salts I and II compared with their precursors. The absorption bands in solid-state at â¼627â nm for I and at â¼615â nm for II that are assigned to charge transfer (CT) effect. The optical properties and single crystal structural features of I and II are explored by experimental and computational tools. The calculated λmax and the CT are in good agreement with the experimental results. The intermolecular interactions existing in the crystal structures and their energies are quantified for various dimers by PIXEL, QTAIM and DFT approaches. Three types of interactions, (i) the cationâ â â cation interactions, (ii) cationâ â â anion interactions and (iii) anionâ â â anion interactions are observed. The cationic moiety is mainly destabilized by C-Hâ â â N/π and πâ â â π interactions whereas the cation and anion moiety is predominantly stabilized by strong C-Hâ â â Br- interactions in both structures. The existence of charge transfer between cation and anion moieties in these structures is established through NBO analysis.
RESUMO
In this work, a study of the photophysical properties in different solvents and at different pH values of a luminogenic compound with a donor-π-acceptor (D-π-A) structure was carried out. The compound (Z)-3-(4-(4,5-diphenyl-1H-imidazol-2-yl)phenyl)-2-phenylacrylonitrile (2) was synthesized and characterized by SCXRD, FT-IR, 1H NMR, 13C NMR, EIMS, UV-Vis absorption and fluorescence. The SCXRD characterization reveals a monoclinic system, P21/c, with Z = 4 and an imidazole core having hydrogen bonding with respect to water molecules present in the asymmetric unit. It leads to a strong π-π-interaction in the solid state. The fluorescence λ max emission of the powder and thin film was observed at 563 nm and 540 nm respectively. Several degrees of positive solvatochromic fluorescence were observed due to different molecular conformations in various solvents. When the pH of the compound was changed with HCl or NaOH, a shift in the wavelength of emission was observed in a reversible manner. At pH 2, the λ max of emission was at 541 nm whereas at pH 14 there were two emissions at 561 nm and 671 nm. Due to their good emission in the solid state, compound 2 was tested as an emitting layer in OLEDs; the devices showed an acceptable performance with a luminance average of 450 cd m-2. The band gap was analyzed by optical absorption, cyclic voltammetry measurement and DFT calculations.
RESUMO
2-(4-((2-Hydroxyethyl)(methyl)amino)benzylidene)malononitrile (HEMABM) was synthesized from 4-[hydroxymethyl(methyl)amino]benzaldehyde and propanedinitrile to obtain a low molecular weight fluorescent material with an efficient solid-state emission and electroluminescence properties comparable to the well-known poly(2-methoxy-5(2'-ethyl)hexoxyphenylenevinylene) (MEH-PPV). The HEMABM was used to prepare an organic light-emitting diode by a solution process. Despite the title compound being a small molecule, it showed optical properties and notable capacity to form a film with smooth morphology (10.81 nm) closer to that of polymer MEH-PPV (10.63 nm). The preparation of the device was by spin coating, the electrical properties such as threshold voltage were about 1.0 V for both HEMABM and MEH-PPV, and the luminance 1300 cd m-2 for HEMABM and 2600 cd m-2 for MEH-PPV. This low molecular weight compound was characterized by SCXRD, IR, NMR, and EI. Besides a quantitative analysis of the intermolecular interactions by PIXEL, density functional theory (DFT) calculations are reported.
RESUMO
Four low molecular weight compounds-three of them new, two of them with carbazole (Cz) as functional group and the other two with thienopyrroledione (TPD) group-were used as emitting materials in organic light emitting diodes (OLEDs). Devices were fabricated with the configuration ITO/PEDOT:PSS/emitting material/LiF/Al. The hole injector layer (HIL) and the emitting sheet were deposited by spin coating; LiF and Al were thermally evaporated. OLEDs based on carbazole derivatives show luminances up to 4130 cd/m², large current efficiencies about 20 cd/A and, cautiously, a very impressive External Quantum Efficiency (EQE) up to 9.5%, with electroluminescence peaks located around 490 nm (greenish blue region). Whereas, devices manufactured with TPD derivatives, present luminance up to 1729 cd/m², current efficiencies about 4.5 cd/A and EQE of 1.5%. These results are very competitive regarding previous reported materials/devices.
Assuntos
Carbazóis/química , Semicondutores , Tienopiridinas/químicaRESUMO
Since the establishment of perovskite solar cells (PSCs), there has been an intense search for alternative materials to replace lead and improve their stability toward moisture and light. As single-metal perovskite structures have yielded unsatisfactory performances, an alternative is the use of double perovskites that incorporate a combination of metals. To this day, only a handful of these compounds have been synthesized, but most of them have indirect bandgaps and/or do not have bandgaps energies well-suited for photovoltaic applications. Here we report the synthesis and characterization of a unique mixed metal ⟨111⟩-oriented layered perovskite, Cs4CuSb2Cl12 (1), that incorporates Cu2+ and Sb3+ into layers that are three octahedra thick (n = 3). In addition to being made of abundant and nontoxic elements, we show that this material behaves as a semiconductor with a direct bandgap of 1.0 eV and its conductivity is 1 order of magnitude greater than that of MAPbI3 (MA = methylammonium). Furthermore, 1 has high photo- and thermal-stability and is tolerant to humidity. We conclude that 1 is a promising material for photovoltaic applications and represents a new type of layered perovskite structure that incorporates metals in 2+ and 3+ oxidation states, thus significantly widening the possible combinations of metals to replace lead in PSCs.
RESUMO
In this Research Article, the effect of two techniques for top-electrode deposition in organic photovoltaics (OPVs) cells with the configuration ITO/PEDOT:PSS/PTB7-Th:PC71BM/PFN/top-electrode is analyzed. One deposition was made by evaporation under high vacuum, meanwhile the other was carried out at normal room atmosphere; for the former, a double layer of Ca and the eutectic alloy Field's metal (FM) was thermally evaporated, while for the latter FM was deposited just by melting and dropping it on top of the delimited active area at temperatures about 90 °C. The average short-circuit photocurrent density, open circuit voltage and fill factor for devices with either Ca/FM (evaporated) or FM (by dripping) cathode, were very similar: around 13.20 mA/cm2, 840 mV, and 0.6, respectively. Average efficiency for devices with the mentioned evaporated cathode was of 6.4% (largest value 7.0%), meanwhile for devices with the cathode deposited by dripping, it was of 6.1% (largest value 6.5%). Morphological analysis, by atomic force microscopy on the surface of a FM electrode, detached from an OPV device, shows inhomogeneities and pinholes in its surface with an average roughness of 16 nm. OPV photocurrent was studied by means of laser beam induced current (LBIC), it showed that OPVs devices with FM top electrode exhibits an inhomogeneous response. An impedance analysis was also carried out and results were correlated with defects observed at the studied interface. In spite of the mentioned deficiencies at FM interface, overall PV performance of devices with this electrode highlights the convenience of using FM because of its easy, fast, and low-cost deposition (vacuum free) characteristics.
RESUMO
We report single crystal X-ray diffraction (hereafter, SCXRD) analyses of derivatives featuring the electron-donor N-ethylcarbazole or the (4-diphenylamino)phenyl moieties associated with a -CN group attached to a double bond. The compounds are (2Z)-3-(4-(diphenylamino)-phenyl)-2-(pyridin-3-yl)prop-2-enenitrile (I), (2Z)-3-(4-(diphenylamino)phenyl)-2-(pyridin-4-yl)-prop-2-enenitrile (II) and (2Z)-3-(9-ethyl-9H-carbazol-3-yl)-2-(pyridin-2-yl)enenitrile (III). SCXRD analyses reveal that I and III crystallize in the monoclinic space groups P2/c with Z' = 2 and C2/c with Z' = 1, respectively. Compound II crystallized in the orthorhombic space group Pbcn with Z' = 1. The molecular packing analysis was conducted to examine the pyridine core effect, depending on the ortho, meta- and para-positions of the nitrogen atom, with respect to the optical properties and number of independent molecules (Z'). It is found that the double bond bearing a diphenylamino moiety introduced properties to exhibit a strong π-π-interaction in the solid state. The compounds were examined to evaluate the effects of solvent polarity, the role of the molecular structure, and the molecular interactions on their self-assembly behaviors. Compound I crystallized with a cell with two conformers, anti and syn, due to interaction with solvent. DFT calculations indicated the anti and syn structures of I are energetically stable (less than 1 eV). Also electrochemical and photophysical properties of the compounds were investigated, as well as the determination of optimization calculations in gas and different solvent (chloroform, cyclohexane, methanol, ethanol, tetrahydrofuran, dichloromethane and dimethyl sulfoxide) in the Gaussian09 program. The effect of solvent by PCM method was also investigated. The frontier HOMO and LUMO energies and gap energies are reported.
Assuntos
Acrilonitrila/química , Carbazóis/química , Estrutura Molecular , Acrilonitrila/síntese química , Carbazóis/síntese química , Cristalografia por Raios X , Elétrons , Modelos Moleculares , Piridinas/químicaRESUMO
Light emission properties of a fluorene cross-conjugated polymer (PFâ»1) based on the monomer 4,7-bis[2-(9,9-dimethyl)fluorenyl] benzo[1,2,5]thiadiazole are reported. This polymer exhibits solubility at high concentrations, good processability into thin solid films of good quality and a broad emission band with a fluorescence quantum yield of approximately 1. Based on these features, in this paper we implemented the use of PFâ»1 as an active layer in polymer light-emitting diodes (PLEDs) and as a laser gain medium in solution. To get insight on the conducting properties of PFâ»1, two different electron injectors, poly [(9,9-bis(3'-(N,N-dimethylamino) propyl)-2,7-fluorene)-alt-2,7-(9,9â»dioctylfluorene)] (PFN) and lithium fluoride (LiF), were used in a simple PLED architecture. PLEDs with the PFN film were found to exhibit better performance with a maximum luminous efficiency of 40 cd/A, a turn-on voltage (Von) of approximately 4.5 V and a luminance maximum of 878 cd/m² at 5.5 V, with a current density of 20 A/m². For the lasing properties of PFâ»1, we found a lasing threshold of around 75 µJ and a tunability of 20 nm. These values are comparable with those of rhodamine 6G, a well-known laser dye.
RESUMO
As a step toward implementing the Colombian Integrated Program for Antimicrobial Resistance Surveillance (COIPARS), this study aimed to establish the baseline antimicrobial resistance patterns of Salmonella serovars, Escherichia coli, and Enterococcus spp. isolates in retail poultry meat from independent stores and from a main chain distributor center. MICs of the isolates were determined for antimicrobials used both in humans and animals, using an automated system. Salmonella serovars were isolated from 26% of the meat samples and E. coli from 83%, whereas Enterococcus faecalis and Enterococcus faecium were detected in 81 and 13% of the meat samples, respectively. A principal finding of concern in this study was that almost 98% of isolates tested were multidrug resistant. Ceftiofur, enrofloxacin, nalidixic acid, and tetracycline were the antimicrobials that showed the highest frequency of resistance among Salmonella and E. coli isolates. For enterococci, 61.5% of E. faecium isolates were found to be resistant to quinupristin-dalfopristin; this is significant because it is used to treat nosocomial infections when vancomycin resistance is present. Vancomycin resistance was detected in 4% of the E. faecalis isolates. The results of our study highlight the need for rapid implementation of an integrated program for surveillance of antimicrobial resistance by the Colombian authorities in order to monitor trends, raise awareness, and help promote practices to safeguard later generation antimicrobial agents.
Assuntos
Farmacorresistência Bacteriana Múltipla , Carne/microbiologia , Resistência a Vancomicina , Animais , Antibacterianos/farmacologia , Galinhas/microbiologia , Colômbia , Enterococcus faecalis/efeitos dos fármacos , Enterococcus faecalis/isolamento & purificação , Enterococcus faecium/efeitos dos fármacos , Enterococcus faecium/isolamento & purificação , Escherichia coli/efeitos dos fármacos , Escherichia coli/isolamento & purificação , Contaminação de Alimentos/análise , Microbiologia de Alimentos , Testes de Sensibilidade Microbiana , Fatores de Risco , Salmonella/efeitos dos fármacos , Salmonella/isolamento & purificação , Virginiamicina/farmacologiaRESUMO
Salmonella Paratyphi B dT+ variant (also termed Salmonella Java) and Salmonella Heidelberg are pathogens of public health importance that are frequently isolated from poultry. As a step toward implementing the Colombian Integrated Program for Antimicrobial Resistant Surveillance, this study characterized molecular patterns of Salmonella Paratyphi B dT+ and Salmonella Heidelberg isolated from poultry farms, fecal samples, and retail chicken meat using pulsed-field gel electrophoresis (PFGE). The objective of this study was to determine the genetic relationship among isolates and to determine potential geographically predominant genotypes. Based on PFGE analysis, both serovars exhibited high heterogeneity: the chromosomal DNA fingerprints of 82 Salmonella Paratyphi B dT+ isolates revealed 42 PFGE patterns, whereas the 21 isolates of Salmonella Heidelberg revealed 10 patterns. Similar genotypes of both serovars were demonstrated to be present on farms and in retail outlets. For Salmonella Paratyphi B dT+, closely genetically related strains were found among isolates coming from different farms and different integrated poultry companies within two departments (Santander and Cundinamarca) and also from farms located in the two geographically distant departments. For Salmonella Heidelberg, there were fewer farms with genetically related isolates than for Salmonella Paratyphi B dT+. A possible dissemination of similar genotypes of both serovars along the poultry production chain is hypothesized, and some facilitating factors existing in Colombia are reviewed.