The complex synaptic pathways onto a looming-detector neuron revealed using serial block-face scanning electron microscopy.

The ability of locusts to detect looming stimuli and avoid collisions or predators depends on a neuronal circuit in the locust's optic lobe. Although comprehensively studied for over three decades, there are still major questions about the computational steps of this circuit. We used fourth instar larvae of Locusta migratoria to describe the connection between the lobula giant movement detector 1 (LGMD1) neuron in the lobula complex and the upstream neuropil, the medulla. Serial block-face scanning electron microscopy (SBEM) was used to characterize the morphology of the connecting neurons termed trans-medullary afferent (TmA) neurons and their synaptic connectivity. This enabled us to trace neurons over several hundred micrometers between the medulla and the lobula complex while identifying their synapses. We traced two different TmA neurons, each from a different individual, from their synapses with the LGMD in the lobula complex up into the medulla and describe their synaptic relationships. There is not a simple downstream transmission of the signal from a lamina neuron onto these TmA neurons; there is also a feedback loop in place with TmA neurons making outputs as well as receiving inputs. More than one type of neuron shapes the signal of the TmA neurons in the medulla. We found both columnar and trans-columnar neurons connected with the traced TmA neurons in the medulla. These findings indicate that there are computational steps in the medulla that have not been included in models of the neuronal pathway for looming detection.

Orientation-Dependent Reflection of Structurally Coloured Butterflies.

Keywords: orientation-dependent reflection; structural color; butterflies; imprinting technique; instrument adaptation.

Two identified looming detectors in the locust: ubiquitous lateral connections among their inputs contribute to selective responses to looming objects.

In locusts, two lobula giant movement detector neurons (LGMDs) act as looming object detectors. Their reproducible responses to looming and their ethological significance makes them models for single neuron computation. But there is no comprehensive picture of the neurons that connect directly to each LGMD. We used high-through-put serial block-face scanning-electron-microscopy to reconstruct the network of input-synapses onto the LGMDs over spatial scales ranging from single synapses and small circuits, up to dendritic branches and total excitatory input. Reconstructions reveal that many trans-medullary-afferents (TmAs) connect the eye with each LGMD, one TmA per facet per LGMD. But when a TmA synapses with an LGMD it also connects laterally with another TmA. These inter-TmA synapses are always reciprocal. Total excitatory input to the LGMD 1 and 2 comes from 131,000 and 186,000 synapses reaching densities of 3.1 and 2.6 synapses per µm2 respectively. We explored the computational consequences of reciprocal synapses between each TmA and 6 others from neighbouring columns. Since any lateral interactions between LGMD inputs have always been inhibitory we may assume these reciprocal lateral connections are most likely inhibitory. Such reciprocal inhibitory synapses increased the LGMD's selectivity for looming over passing objects, particularly at the beginning of object approach.

Electrochemically Tunable Resistance of Nanoporous Platinum Produced by Dealloying.

The extremely high surface-to-volume ratio of nanoporous platinum (np-Pt) produced by dealloying was applied for tuning electrical resistance by surface charging. In the as-dealloyed state, a characteristic sign-inversion of the charging-induced resistance variation occurs, which can be associated with the electronic structure of PtO. After electrochemical reduction, the relative resistance variations of np-Pt of up to 58% could be generated by electrochemically induced adsorption and desorption, which was 1 order of magnitude larger compared with that of cluster-assembled nanocrystalline Pt. Although the maximum resistance variation was also higher than that of dealloyed nanoporous gold (np-Au), the resistance variation related to the imposed charge was reduced owing to the higher bulk resistance of Pt compared with that of Au. The sign-inversion behavior of the resistance could be recovered by re-oxidation.

Optimizing the 3D-reconstruction technique for serial block-face scanning electron microscopy.

BACKGROUND: Elucidating the anatomy of neuronal circuits and localizing the synaptic connections between neurons, can give us important insights in how the neuronal circuits work. We are using serial block-face scanning electron microscopy (SBEM) to investigate the anatomy of a collision detection circuit including the Lobula Giant Movement Detector (LGMD) neuron in the locust, Locusta migratoria. For this, thousands of serial electron micrographs are produced that allow us to trace the neuronal branching pattern. NEW METHOD: The reconstruction of neurons was previously done manually by drawing cell outlines of each cell in each image separately. This approach was very time consuming and troublesome. To make the process more efficient a new interactive software was developed. It uses the contrast between the neuron under investigation and its surrounding for semi-automatic segmentation. RESULTS: For segmentation the user sets starting regions manually and the algorithm automatically selects a volume within the neuron until the edges corresponding to the neuronal outline are reached. Internally the algorithm optimizes a 3D active contour segmentation model formulated as a cost function taking the SEM image edges into account. This reduced the reconstruction time, while staying close to the manual reference segmentation result. COMPARISON WITH EXISTING METHODS: Our algorithm is easy to use for a fast segmentation process, unlike previous methods it does not require image training nor an extended computing capacity. CONCLUSION: Our semi-automatic segmentation algorithm led to a dramatic reduction in processing time for the 3D-reconstruction of identified neurons.

Synaptic connections of first-stage visual neurons in the locust Schistocerca gregaria extend evolution of tetrad synapses back 200 million years.

The small size of some insects, and the crystalline regularity of their eyes, have made them ideal for large-scale reconstructions of visual circuits. In phylogenetically recent muscomorph flies, like Drosophila, precisely coordinated output to different motion-processing pathways is delivered by photoreceptors (R cells), targeting four different postsynaptic cells at each synapse (tetrad). Tetrads were linked to the evolution of aerial agility. To reconstruct circuits for vision in the larger brain of a locust, a phylogenetically old, flying insect, we adapted serial block-face scanning electron microscopy (SBEM). Locust lamina monopolar cells, L1 and L2, were the main targets of the R cell pathway, L1 and L2 each fed a different circuit, only L1 providing feedback onto R cells. Unexpectedly, 40% of all locust R cell synapses onto both L1 and L2 were tetrads, revealing the emergence of tetrads in an arthropod group present 200 million years before muscomorph flies appeared, coinciding with the early evolution of flight.

An investigation on focused electron/ion beam induced degradation mechanisms of conjugated polymers.

Irradiation damage, caused by the use of beams in the electron microscopes, leads to undesired physical/chemical material property changes or uncontrollable modification of structures that are being processed. Particularly, soft matter such as polymers or biological materials is highly susceptible and very much prone to react on irradiation by electron and ion beams. The effect is even higher when materials are subjected to energetic species such as ions that possess high momentum and relatively low mean path due to their mass. Especially when Ga(+) ions (used as the ion source in Focused Ion Beam (FIB) instruments) are considered, the end-effect might even be the total loss of the material's properties. This paper will discuss the possible types of degradation mechanisms and defect formations that can take place during ion and electron beam irradiation of the conjugated polymers: e.g. polyfluorene (PF) and poly-3-hexylthiophene (P3HT) thin films. For the investigation of the irradiation induced degradation mechanisms in this study, complementary analytical techniques such as Raman Spectroscopy (RS), Infrared Spectroscopy (IR), Electron Energy Loss Spectroscopy (EELS), Atomic Force Microscopy (AFM), and Fluorescence Microscopy including Photoluminescence (PL) and Electroluminescence (EL) Microscopy were applied.

Environmental scanning electron microscopy (ESEM)--a versatile tool in studying plants.

Environmental scanning electron microscopy (ESEM) enables the investigation of hydrated and uncoated plant samples and the in situ observation of dynamic processes. Water vapor in the microscope chamber takes part in secondary electron detection and charge prevention. Two ESEM modes are available and offer a broad spectrum of applications. The environmental or wet mode prevents sample dehydration by the combination of sample cooling (5°C) and a vapor pressure of 4-6 Torr. In the low vacuum mode, the maximum chamber pressure is limited to 1 Torr (corresponding to about 5% relative humidity in the chamber) and allows the simultaneous use of a backscattered electron detector for imaging material contrast. A selection of characteristic plant samples and various applications are presented as a guide to ESEM for plant scientists. Leaf surfaces, trichomes, epicuticular waxes, and inorganic surface layers represent samples being comparatively resistant to dehydration, whereas callus cells and stigmatic tissue are examples for dehydration- and beam-sensitive samples. The potential of investigating dynamic processes in situ is demonstrated by studying anther opening, by tensile testing of leaves, and by performing hydration/dehydration experiments by changing the vapor pressure. Additionally, automated block-face imaging and serial sectioning using in situ ultramicrotomy is presented. The strengths and weaknesses of ESEM are discussed and it is shown that ESEM is a versatile tool in plant science.

Development of a microfluidic immobilised enzyme reactor.

A microfluidic immobilised enzyme reactor consisting of a catalytically functionalised microstructure fabricated from silicone rubber material was used for steady-state kinetic characterisation of a thermophilic beta-glycosidase under pressure-driven flow conditions and continuous conversion of lactose by this enzyme at 80 degrees C.