RESUMO
Two literature-known sulfido vanadates, Na3[VS4] and K3[VS4], were obtained through a straightforward and scalable synthetic method. Highly crystalline powders of both compounds were obtained from the homogeneous molten phases of starting materials via aâcomparably rapidâsolid-state technique. Low-temperature structure determination, ambient temperature powder diffraction, and solid-state NMR spectroscopy verify previous structural reports and indicate purity of the obtained samples. Both compounds show semiconductivity with the optical band gap values in the range of 2.1 to 2.3 eV. Experimental values of the ionic conductivity and dielectric constants are σ = 2.41·10-5 mS·cm-1, k = 76.52 and σ = 1.36·10-4 mS·cm-1, k = 103.67 at ambient temperature for Na3[VS4] and K3[VS4], respectively. It is demonstrated that Na3[VS4] depicts second-order nonlinear optical properties, i.e., second harmonic generation over a broad wavelength spectrum. The results introduce new aspects of sulfido vanadates as multifunctional candidates for potential optical and electrical applications.
RESUMO
There are various commercially available setups for studying drug permeation, which differ in cost and manual labor. We explore an artificial membrane in an NMR tube to assess drug permeation with automated measurements. NMR-based concentrations were validated with HPLC and compared to a conventional setup. Setup-specific challenges and workarounds as well as future setup-designs for this and other applications are discussed.
Assuntos
Membranas Artificiais , Espectroscopia de Ressonância Magnética , Cromatografia Líquida de Alta PressãoRESUMO
Hydrogen bonds (H-bonds) are highly sensitive to the surrounding environments owing to their dipolar nature, with polar solvents kown to significantly weaken H-bonds. Herein, the stability of the H-bonding motif ureidopyrimidinone (UPy) is investigated, embedded into a highly polar polymeric ionic liquid (PIL) consisting of pendant pyrrolidinium bis(trifluoromethylsulfonyl)imide (IL) moieties, to study the influence of such ionic environments on the UPy H-bonds. The content of the surrounding IL is changed by addition of an additional low molecular weight IL to further boost the IL content around the UPy moieties in molar ratios of UPy/IL ranging from 1/4 up to 1/113, thereby promoting the polar microenvironment around the UPy-H-bonds. Variable-temperature solid-state MAS NMR spectroscopy and FT-IR spectroscopy demonstrate that the UPy H-bonds are largely present as (UPy-) dimers, but sensitive to elevated temperatures (>70 °C). Subsequent rheology and DSC studies reveal that the ILs only solvate the polymeric chains but do not interfere with the UPy-dimer H-bonds, thus accounting for their high stability and applicability in many material systems.
Assuntos
Líquidos Iônicos , Líquidos Iônicos/química , Ligação de Hidrogênio , Espectroscopia de Infravermelho com Transformada de Fourier , Polímeros/química , Solventes/químicaRESUMO
Mucus mechanically protects the intestinal epithelium and impacts the absorption of drugs, with a largely unknown role for bile. We explored the impacts of bile on mucosal biomechanics and drug transport within mucus. Bile diffused with square-root-of-time kinetics and interplayed with mucus, leading to transient stiffening captured in Brillouin images and a concentration-dependent change from subdiffusive to Brownian-like diffusion kinetics within the mucus demonstrated by differential dynamic microscopy. Bile-interacting drugs, Fluphenazine and Perphenazine, diffused faster through mucus in the presence of bile, while Metoprolol, a drug with no bile interaction, displayed consistent diffusion. Our findings were corroborated by rat studies, where co-dosing of a bile acid sequestrant substantially reduced the bioavailability of Perphenazine but not Metoprolol. We clustered over 50 drugs based on their interactions with bile and mucin. Drugs that interacted with bile also interacted with mucin but not vice versa. This study detailed the dynamics of mucus biomechanics under bile exposure and linked the ability of a drug to interact with bile to its abbility to interact with mucus.
Assuntos
Bile , Elevadores e Escadas Rolantes , Ratos , Animais , Perfenazina , Muco , MucinasRESUMO
Bile solubilization and apparent solubility at resorption sites critically affect the bioavailability of orally administered and poorly water-soluble drugs. Therefore, identification of drug-bile interaction may critically determine the overall formulation success. For the case of the drug candidate naporafenib, drug in solution at phase separation onset significantly improved with polyethylene glycol-40 hydrogenated castor oil (RH40) and amino methacrylate copolymer (Eudragit E) but not with hydroxypropyl cellulose (HPC) in both phosphate-buffered saline (PBS) and PBS supplemented with bile components. Naporafenib interacted with bile as determined by 1H and 2D 1H-1H nuclear magnetic resonance spectroscopy and so did Eudragit E and RH40 but not HPC. Flux across artificial membranes was reduced in the presence of Eudragit E. RH40 reduced the naporafenib supersaturation duration. HPC on the other side stabilized naporafenib's supersaturation and did not substantially impact flux. These insights on bile interaction correlated with pharmacokinetics (PK) in beagle dogs. HPC preserved naporafenib bile solubilization in contrast to Eudragit E and RH40, resulting in favorable PK.
Assuntos
Bile , Excipientes , Animais , Cães , Excipientes/química , Ácidos Polimetacrílicos/química , SolubilidadeRESUMO
Drug loading of polymer micelles can have a profound effect on their particle size and morphology as well as their physicochemical properties. In turn, this influences performance in biological environments. For oral delivery of drugs, the intestinal environment is key, and consequently, a thorough structural understanding of what happens at this material-biology interface is required to understand in vivo performance and tailor improved delivery vehicles. In this study, we address this interface in vitro through a detailed structural characterization of the colloidal assemblies of polymeric micelles based on poly(2-oxazolines) with three different guest loadings with the natural product curcumin (17-52 wt %) in fed-state simulated intestinal fluids (FeSSIF). For this, we employ NMR spectroscopy, in particular, 1H NMR, 1H-1H-NOESY, and 1H DOSY experiments complemented by quantum chemical calculations and cryo-TEM measurements. Through this mixture of methods, we identified curcumin-taurocholate interactions as central interaction patterns alongside interactions with the polymer and lipids. Furthermore, curcumin molecules can be exchanged between polymer micelles and bile colloids, an important prerequisite for their uptake. Finally, increased loading of the polymer micelles with curcumin resulted in a larger number of vesicles as taurocholateâthrough coordination with Curâis less available to form nanoparticles with the lipids. The loading-dependent behavior found in this study deviates from previous work on a different drug substance highlighting the need for further studies including different drug molecules and polymer types to improve the understanding of events on the molecular level.
Assuntos
Antineoplásicos , Curcumina , Micelas , Curcumina/química , Polímeros/química , LipídeosRESUMO
The self-assembly of molecular metal oxides, polyoxometalates (POMs), can be controlled using internal or, more rarely, external templates. Here, we explore how the interplay between internal templates (halides, oxoanions) and organic external templates (protonated cyclene species) affect the self-assembly of a model polyoxovanadate cluster, [V12O32X]n- (X = Cl-, Br-, NO3-). A combination of crystallographic analyses, spectroscopic studies and in situ as well as solid-state 51V NMR spectroscopy provide critical insights into the initial formation of an intermediate vanadate species formed during the process. Structural and spectroscopic studies suggest that a direct interaction between internal and external templates allows tuning of the internal template position within the cluster cavity. These insights form the basis for further developing the template-driven synthetic chemistry of polyoxovanadates.
RESUMO
Polymer self-assembly leading to cooling-induced hydrogel formation is relatively rare for synthetic polymers and typically relies on H-bonding between repeat units. Here, we describe a non-H-bonding mechanism for a cooling-induced reversible order-order (sphere-to-worm) transition and related thermogelation of solutions of polymer self-assemblies. A multitude of complementary analytical tools allowed us to reveal that a significant fraction of the hydrophobic and hydrophilic repeat units of the underlying block copolymer is in close proximity in the gel state. This unusual interaction between hydrophilic and hydrophobic blocks reduces the mobility of the hydrophilic block significantly by condensing the hydrophilic block onto the hydrophobic micelle core, thereby affecting the micelle packing parameter. This triggers the order-order transition from well-defined spherical micelles to long worm-like micelles, which ultimately results in the inverse thermogelation. Molecular dynamics modeling indicates that this unexpected condensation of the hydrophilic corona onto the hydrophobic core is due to particular interactions between amide groups in the hydrophilic repeat units and phenyl rings in the hydrophobic ones. Consequently, changes in the structure of the hydrophilic blocks affecting the strength of the interaction could be used to control macromolecular self-assembly, thus allowing for the tuning of gel characteristics such as strength, persistence, and gelation kinetics. We believe that this mechanism might be a relevant interaction pattern for other polymeric materials as well as their interaction in and with biological environments. For example, controlling the gel characteristics could be considered important for applications in drug delivery or biofabrication.
RESUMO
Poorly water-soluble drugs are frequently formulated with lipid-based formulations including microemulsions and their preconcentrates. We detailed the solidification of drug-loaded microemulsion preconcentrates with the acid-sensitive metal-organic framework ZIF-8 by X-ray powder diffraction and solid-state nuclear magnetic resonance spectroscopy. Adsorption and desorption dynamics were analyzed by fluorescence measurement, high-performance liquid chromatography, dynamic light scattering and 1H-DOSY experiments using the model compounds Nile Red, Vitamin K1, and Lumefantrine. Preconcentrates and drugs were successfully loaded onto ZIF-8 while preserving its crystal structure. The solid powder was pressable to tablets or 3D-printed into oral dosage forms. At low pH, colloidal solutions readily formed, solubilizing the poorly water-soluble compounds. The use of stimuli-responsive metal organic frameworks as carriers for the oral delivery of lipid-based formulations points towards solid dosage forms readily forming colloidal microemulsions.
Assuntos
Estruturas Metalorgânicas , Sistemas de Liberação de Medicamentos , Água/química , Emulsões/química , Lipídeos/química , Comprimidos , Concentração de Íons de HidrogênioRESUMO
The synthesis and detailed characterization of low-viscosity room-temperature ionic liquids (RTILs) and [BnPh3P]+ salts with the cyano(fluoro)borate anions [BF(CN)3]- (MFB), [BF2(CN)2]- (DFB), and [BF3(CN)]- as well as the new mixed-substituted anion [BFH(CN)2]- (FHB) is described. The RTILs with [EMIm]+ or [BMPL]+ as countercations were obtained in yields of up to 98% from readily available alkali metal salts and in high purities that allow application in electrochemical devices. Trends in thermal stability, melting and freezing behavior, density, electrochemical stability, dynamic viscosity, specific conductivity and ion diffusivity have been assessed and compared to those of the related tetracyanoborate- and cyano(hydrido)borate-RTILs. The crystal structure analysis of the [BnPh3P]+ salts of [BFn(CN)4-n]- (n = 0-4), [BHn(CN)4-n]- (n = 1-3) and [BFH(CN)2]- provided experimental access to anion volumina that together with ion molecular mass, electrostatic potential, shape and chemical stability have been correlated to physicochemical properties. In addition, the cytotoxicity of the [EMIm]+-ILs and potassium or sodium salts was studied.
RESUMO
Although solid-state nuclear magnetic resonance (NMR) is a versatile analytical tool to study polymorphs and phase transitions of pharmaceutical molecules and products, this work summarizes examples of spontaneous and unexpected (and unwanted) structural rearrangements and phase transitions (amorphous-to-crystalline and crystalline-to-crystalline) under magic angle spinning (MAS) conditions, some of them clearly being due to the pressure experienced by the samples. It is widely known that such changes can often be detected by X-ray powder diffraction (XRPD); here, the capability of solid-state NMR experiments with a special focus on 1 H-13 C frequency-switched Lee-Goldburg heteronuclear correlation (FSLG HETCOR)/MAS NMR experiments to detect even subtle changes on a molecular level not observable by conventional 1D NMR experiments or XRPD is presented. Furthermore, it is shown that a polymorphic impurity combined with MAS can induce a crystalline-to-crystalline phase transition. This showcases that solid-state NMR is not always noninvasive and such changes upon MAS should be considered in particular when compounds are studied over longer time spans.
Assuntos
Imageamento por Ressonância Magnética , Espectroscopia de Ressonância Magnética , Preparações FarmacêuticasRESUMO
Molecular metal oxides are key materials in diverse fields like energy storage and conversion, molecular magnetism and as model systems for solid-state metal oxides. To improve their performance and increase the variety of accessible motifs, new synthetic approaches are necessary. Herein, we report a universal, new precursor to access different metal-functionalized polyoxovanadate (POV) clusters. The precursor is synthesized by a novel solid-state thermal treatment procedure. Solution-phase test reactions at room temperature and pressure show that reaction of the precursor with various metal nitrate salts gives access to a range of metal-functionalized POVs. The first nitrate-templated molecular calcium vanadate cluster is reported. We show that this precursor could open new access routes to POV components for molecular magnetism, energy technologies or catalysis.
RESUMO
Many drugs and drug candidates are poorly water-soluble. Intestinal fluids play an important role in their solubilization. However, the interactions of intestinal fluids with polymer excipients, drugs and their formulations are not fully understood. Here, diffusion ordered spectroscopy (DOSY) and nuclear Overhauser effect spectroscopy (NOESY), complemented by cryo-TEM were employed to address this. Efavirenz (EFV) as model drug, the triblock copolymers Pluronic® F-127 (PF127) and poly(2-oxazoline) based pMeOx-b-pPrOzi-b-pMeOx (pOx/pOzi) and their respective formulations were studied in simulated fed-state intestinal fluid (FeSSIF). For the individual polymers, the bile interfering nature of PF127 was confirmed and pure pOx/pOzi was newly classified as non-interfering. A different and more complex behaviour was however observed if EFV was involved. PF127/EFV formulations in FeSSIF showed concentration dependent aggregation with separate colloids at low formulation concentrations, a merging of individual particles at the solubility limit of EFV in FeSSIF and joint aggregates above this concentration. In the case of pOx/pOzi/EFV formulations, coincident diffusion coefficients for pOx/pOzi, lipids and EFV indicate joint aggregates across the studied concentration range. This demonstrates that separate evaluation of polymers and drugs in biorelevant media is not sufficient and their mixtures need to be studied to learn about concentration and composition dependent behaviour.
Assuntos
Benzoxazinas , Poloxâmero , Alcinos , Ciclopropanos , Excipientes , SolubilidadeRESUMO
Anionic lithium-containing species were predicted to impact ionic liquid-based electrochemical applications but have hitherto never been isolated from ionic liquid systems. Here, we report the first representatives of this class of compounds, ino-chloridolithates, comprising [LiCl2]- and [Li2Cl3]- polyanions from ionothermal reactions. Such compounds are obtained at moderate temperatures with imidazolium-based ionic liquids and LiCl. The addition of an auxiliary ammonium salt enhances the lattice energy to yield an ammonium lithate in good yields, which enables extensive investigations including solid-state nuclear magnetic resonance, infrared, and Raman spectroscopy. The structural motifs of ino-lithates are related to ino-silicates, as 1D-extended anionic substructures are formed. Despite this analogy, according to density functional theory calculations with periodic boundary conditions, no evidence of covalent bonding in the anionic moieties is found-indicating packing effects to be the main cause for the formation. Based on an in-depth analysis of the different synthetic parameters, this class of compounds is discussed as an intermediate in ionic liquid applications and could serve as a model system for electrochemical lithium-based systems.
RESUMO
Hydrogels are key components in several biomedical research areas such as drug delivery, tissue engineering, and biofabrication. Here, a novel ABA-type triblock copolymer comprising poly(2-methyl-2-oxazoline) as the hydrophilic A blocks and poly(2-phenethyl-2-oxazoline) as the aromatic and hydrophobic B block is introduced. Above the critical micelle concentration, the polymer self-assembles into small spherical polymer micelles with a hydrodynamic radius of approx 8-8.5 nm. Interestingly, this specific combination of hydrophilic and hydrophobic aromatic moieties leads to rapid thermoresponsive inverse gelation at polymer concentrations above a critical gelation concentration (20 wt %) into a macroporous hydrogel of densely packed micelles. This hydrogel exhibited pronounced viscoelastic solid-like properties, as well as extensive shear-thinning, rapid structure recovery, and good strain resistance properties. Excellent 3D-printability of the hydrogel at lower temperature opens a wide range of different applications, for example, in the field of biofabrication. In preliminary bioprinting experiments using NIH 3T3 cells, excellent cell viabilities of more than 95% were achieved. The particularly interesting feature of this novel material is that it can be used as a printing support in hybrid bioink systems and sacrificial bioink due to rapid dissolution at physiological conditions.
Assuntos
Bioimpressão , Animais , Hidrogéis , Camundongos , Oxazóis , Impressão Tridimensional , Engenharia TecidualRESUMO
The ongoing transition from fossil to renewable feedstocks demands new efficient processes for an economically viable production of biomass-derived commodities and fine chemicals. Novel energy- and material-efficient product purification and separation will play a crucial role due to altered product and feed composition. The present study comprises the synthesis and tests of cross-linked p-vinylphenylboronate polymers for the separation of 18 diols, sugar alcohols, and saccharides, which can be obtained during biomass processing. The separation was based on molecular recognition, that is, esterification of the phenylboronate with vicinal diols. A correlation of the molecular complexation constant, the polymer swelling, and the maximum adsorption capacity was found. The adsorption curves over time were recorded. Preliminary results on competitive adsorption of binary mixtures showed a high potential for the separation of substrates with significantly different complexation constants. Desorption tests implied easier desorption of substrates that only adsorb on the outer polymer shell.
RESUMO
Bile colloids containing taurocholate and lecithin are essential for the solubilization of hydrophobic molecules including poorly water-soluble drugs such as Perphenazine. We detail the impact of Perphenazine concentrations on taurocholate/lecithin colloids using analytical ultracentrifugation, dynamic light scattering, small-angle neutron scattering, nuclear magnetic resonance spectroscopy, coarse-grained molecular dynamics simulations, and isothermal titration calorimetry. Perphenazine impacted colloidal molecular arrangement, structure, and binding thermodynamics in a concentration-dependent manner. At low concentration, Perphenazine was integrated into stable and large taurocholate/lecithin colloids and close to lecithin. Integration of Perphenazine into these colloids was exothermic. At higher Perphenazine concentration, the taurocholate/lecithin colloids had an approximately 5-fold reduction in apparent hydrodynamic size, heat release was less exothermic upon drug integration into the colloids, and Perphenazine interacted with both lecithin and taurocholate. In addition, Perphenazine induced a morphological transition from vesicles to wormlike micelles as indicated by neutron scattering. Despite these surprising colloidal dynamics, these natural colloids successfully ensured stable relative amounts of free Perphenazine throughout the entire drug concentration range tested here. Future studies are required to further detail these findings both on a molecular structural basis and in terms of in vivo relevance.
RESUMO
Poorly water-soluble drugs frequently solubilize into bile colloids and this natural mechanism is key for efficient bioavailability. We tested the impact of pharmaceutical polymers on this solubilization interplay using proton nuclear magnetic resonance spectroscopy, dynamic light scattering, and by assessing the flux across model membranes. Eudragit E, Soluplus, and a therapeutically used model polymer, Colesevelam, impacted the bile-colloidal geometry and molecular interaction. These polymer-induced changes reduced the flux of poorly water-soluble and bile interacting drugs (Perphenazine, Imatinib) but did not impact the flux of bile non-interacting Metoprolol. Non-bile interacting polymers (Kollidon VA 64, HPMC-AS) neither impacted the flux of colloid-interacting nor colloid-non-interacting drugs. These insights into the drug substance/polymer/bile colloid interplay potentially point towards a practical optimization parameter steering formulations to efficient bile-solubilization by rational polymer selection.
Assuntos
Polímeros , Água , Bile , Coloides , SolubilidadeRESUMO
Amorphous drug-polymer formulations are complex materials and often challenging to characterize, even more so if the small molecule component itself is increasingly complex. In this work, we present 14N-1H HMQC magic-angle spinning (MAS) NMR experiments in the solid state as a promising tool to study amorphous formulations. Poly(2-oxazoline) based polymer micelles loaded with different amounts of the cancer drug paclitaxel serve to highlight the possibilities offered by these experiments: while the dense core of these polymeric micelles prevents NMR spectroscopic analysis in solution and the very similar 15N chemical shifts hamper a solid-state NMR characterization based on this nucleus, 14N is a very versatile alternative. 14N-1H HMQC experiments yield well-separated signals, which are spread over a large ppm range, and provide information on the symmetry of the nitrogen environment and probe 14N-1H through-space proximities. In this way, the overall complexity can be narrowed down to specific N-containing environments. The results from the experiments presented here represent a valuable puzzle piece, which helps to improve the structural understanding of drug-polymer formulations. It can be straightforwardly combined with complementary NMR spectroscopic experiments and other analytical techniques.
Assuntos
Micelas , Oxazóis/química , Paclitaxel/química , Composição de Medicamentos , Espectroscopia de Ressonância MagnéticaRESUMO
Shape-persistent conjugated mesogens with oligothiophene arms of different lengths have been synthesized. Such mesogens possess free intrinsic space between their conjugated arms. They form columnar liquid-crystalline phases, in which the void is filled by dense helical packing in the neat phase similar to an oligo(phenylene vinylene) derivative of equal size. The void can also be compensated by the inclusion of the small acceptor molecule 2,4,7-trinitrofluorenone. In solution, the acceptor interacts with the core as the largest π-surface, while in the solid material, it is incorporated between the arms and sandwiched by the star-shaped neighbours along the columnar assemblies. The TNF acceptors are not nanosegregated from the star-shaped donors, thus the liquid crystal structure converts to a nano-reservoir for TNF (endo-receptor). These host-guest arrangements are confirmed by comprehensive X-ray scattering experiments and solid-state NMR spectroscopy. This results in ordered columnar hexagonal phases at high temperatures, which change to helical columnar mesophases or to columnar soft crystals at room temperature.