RESUMO
Bio-based polymers are attracting increasing interest as alternatives to harmful and environmentally concerning non-biodegradable fossil-based products. In particular, bio-based polymers may be employed as ligands for the preparation of metal nanoparticles (M(0)NPs). In this study, chitosan (CS) was used for the stabilization of Ru(0) and Rh(0) metal nanoparticles (MNPs), prepared by simply mixing RhCl3 × 3H2O or RuCl3 with an aqueous solution of CS, followed by NaBH4 reduction. The formation of M(0)NPs-CS was confirmed by Fourier Transform Infrared Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC), Thermal Gravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), Energy-Dispersive X-ray Analysis (EDX), Transmission Electron Microscopy (TEM) and X-ray Diffraction (XRD). Their size was estimated to be below 40 nm for Rh(0)-CS and 10nm for Ru(0)-CS by SEM analysis. M(0)NPs-CS were employed for the hydrogenation of (E)-cinnamic aldehyde and levulinic acid. Easy recovery by liquid-liquid extraction made it possible to separate the catalyst from the reaction products. Recycling experiments demonstrated that M(0)NPs-CS were highly efficient up to four times in the best hydrogenation conditions. The data found in this study show that CS is an excellent ligand for the stabilization of Rh(0) and Ru(0) nanoparticles, allowing the production of some of the most efficient, selective and recyclable hydrogenation catalysts known in the literature.
RESUMO
Bio-based polymers are materials of high interest given the harmful environmental impact that involves the use of non-biodegradable fossil products for industrial applications. These materials are also particularly interesting as bio-based ligands for the preparation of metal nanoparticles (MNPs), employed as catalysts for the synthesis of high value chemicals. In the present study, Ru (0) and Rh(0) Metal Nanoparticles supported on Sodium Carboxymethyl cellulose (MNP(0)s-CMCNa) were prepared by simply mixing RhCl3x3H2O or RuCl3 with an aqueous solution of CMCNa, followed by NaBH4 reduction. The formation of MNP(0)s-CMCNa was confirmed by FT-IR and XRD, and their size estimated to be around 1.5 and 2.2 nm by TEM analysis. MNP(0)s-CMCNa were employed for the hydrogenation of (E)-cinnamic aldehyde, furfural and levulinic acid. Hydrogenation experiments revealed that CMCNa is an excellent ligand for the stabilization of Rh(0) and Ru(0) nanoparticles allowing to obtain high conversions (>90 %) and selectivities (>98 %) with all substrates tested. Easy recovery by liquid/liquid extraction allowed to separate the catalyst from the reaction products, and recycling experiments demonstrated that MNPs-CS were highly efficiency up to three times in best hydrogenation conditions.
Assuntos
Carboximetilcelulose Sódica , Nanopartículas Metálicas , Solubilidade , Água , Carboximetilcelulose Sódica/química , Catálise , Água/química , Nanopartículas Metálicas/química , Hidrogenação , Rutênio/química , Ródio/químicaRESUMO
The acylation of 1,3-benzodioxole was studied in a continuous process using a recyclable heterogeneous substoichiometric catalyst. In a short time period (30 min), at 100 °C, the conversion rate was 73%, with a selectivity of 62% of the desired acylated product; the reaction was run continuously for 6 h, showing excellent stability and selectivity. Moreover, the unreacted starting material, 1,3-benzodioxole, can be easily separated by distillation and recycled.
RESUMO
Cinacalcet (I), sold as hydrochloride salt, is a calcimimetic drug which has been approved for the treatment of secondary hyperparathyroidism in patients with chronic renal disease and for the treatment of hypercalcemia in patients with parathyroid carcinoma. Here, an improved method for the synthesis of 3-(3-trifluoromethylphenyl)propanal (II), a key intermediate for the preparation of I, is described. The protocol required a Mizoroki-Heck cross-coupling reaction between 1-bromo-3-(trifluoromethyl)benzene and acroleine diethyl acetal, catalyzed by Pd(OAc)2 in the presence of nBu4NOAc (tetrabutylammonium acetate), followed by the hydrogenation reaction of the crude mixture of products in a cascade process. Palladium species, at the end of the reaction, were efficiently recovered as Pd/Al2O3. The procedure was developed under conventional heating conditions as well as under microwave-assisted conditions. The obtained mixture of 1-(3,3-diethoxypropyl)-3-(trifluoromethyl)benzene (III), impure for ethyl 3-(3-trifluoromethylphenyl) propanoate (IV), was finally treated, under mild conditions, with potassium diisobutyl-tert-butoxyaluminum hydride (PDBBA) to obtain after hydrolysis 3-(3-trifluoromethylphenyl)propanal (II), in an excellent overall yield and very high purity. Microwave conditions permitted a reduction in reaction times without affecting selectivity and yield. The final API was obtained through reductive amination of (II) with (R)-(+)-1-(1-naphthyl)ethylamine (V) using a catalyst prepared by us with a very low content of precious metal.
Assuntos
Anticoagulantes , Benzeno , Humanos , Cinacalcete , Aldeídos , Ácido ClorídricoRESUMO
A manganese-based metal-organic framework with dipyrazole ligands has been metalated with atomically dispersed Rh and Co species and used as a catalyst for the hydroformylation of styrene. The Rh-based materials exhibited excellent conversion at 80 °C with complete chemoselectivity, high selectivity for the branched aldehyde, high recyclability, and negligible metal leaching.
RESUMO
Silver nanoparticles (AgNPs), embedded into a specific exopolysaccharide (EPS), were produced by Klebsiella oxytoca DSM 29614 by adding AgNO3 to the cultures during exponential growth phase. In particular, under aerobic or anaerobic conditions, two types of silver nanoparticles, named AgNPs-EPS(aer) and the AgNPs-EPS(anaer), were produced respectively. The effects on bacterial cells was demonstrated by using Escherichia coli K12 and Kocuria rhizophila ATCC 9341 (ex Micrococcus luteus) as Gram-negative and Gram-positive tester strains, respectively. The best antimicrobial activity was observed for AgNPs-EPS(aer), in terms of minimum inhibitory concentrations and minimum bactericidal concentrations. Observations by transmission electron microscopy showed that the cell morphology of both tester strains changed during the exposition to AgNPs-EPS(aer). In particular, an electron-dense wrapped filament was observed in E. coli cytoplasm after 3 h of AgNPs-EPS(aer) exposition, apparently due to silver accumulation in DNA, and both E. coli and K. rhizophila cells were lysed after 18 h of exposure to AgNPs-EPS(aer). The DNA breakage in E. coli cells was confirmed by the comparison of 3-D fluorescence spectra fingerprints of DNA. Finally the accumulation of silver on DNA of E. coli was confirmed directly by a significant Ag(+) release from DNA, using the scanning electrochemical microscopy and the voltammetric determinations.
Assuntos
Antibacterianos/farmacologia , Escherichia coli/efeitos dos fármacos , Klebsiella oxytoca/metabolismo , Nanopartículas Metálicas , Polissacarídeos Bacterianos/farmacologia , Prata/farmacologia , Antibacterianos/biossíntese , Reatores Biológicos , Fragmentação do DNA , Escherichia coli/genética , Testes de Sensibilidade Microbiana , Polissacarídeos Bacterianos/biossíntese , Prata/metabolismoRESUMO
Klebsiella oxytoca BAS-10 ferments citrate to acetic acid and CO2, and secretes a specific exopolysaccharide (EPS), which is able to bind different metallic species. These biomaterials may be used for different biotechnological purposes, including applications as innovative green biogenerated catalysts. In production of biogenerated Pd species, the Fe(III) as ferric citrate is added to anaerobic culture of K.â oxytoca BAS-10, in the presence of palladium species, to increase the EPS secretion and improve Pd-EPS yield. In this process, bi-metallic (FePd-EPS) biomaterials were produced for the first time. The morphology of bi-metallic EPS, and the chemical state of the two metals in the FePd-EPS, are investigated by transmission electron microscopy, Fourier transform infra-red spectroscopy, micro-X-ray fluorescence, and X-ray absorption spectroscopy methods (XANES and EXAFS), and compared with mono-metallic Pd-EPS and Fe-EPS complexes. Iron in FePd-EPS is in the mineralized form of iron oxides/hydroxides, predominantly in the form of Fe(3+), with a small amount of Fe(2+) in the structure, most probably a mixture of different nano-crystalline iron oxides and hydroxides, as in mono-metallic Fe-EPS. Palladium is found as Pd(0) in the form of metallic nanoparticles with face-centred cubic structure in both bi-metallic (FePd-EPS) and mono-metallic (Pd-EPS) species. In bi-metallic species, Pd and Fe nanoparticles agglomerate in larger clusters, but they remain spatially separated. The catalytic ability of bi-metallic species (FePd-EPS) in a hydrodechlorination reaction is improved in comparison with mono-metallic Pd-EPS.
Assuntos
Ferro/análise , Klebsiella oxytoca/metabolismo , Paládio/análise , Polissacarídeos Bacterianos/química , Anaerobiose , Fermentação , Compostos Férricos/química , Microscopia Eletrônica , Nanopartículas , Espectrometria por Raios X , Espectroscopia de Infravermelho com Transformada de Fourier , Síncrotrons , Espectroscopia por Absorção de Raios XRESUMO
A strain of Klebsiella oxytoca BAS-10, known to produce a specific exopolysaccharide (EPS), when grown aerobically in static mode in the presence of Pd(NO3)2, generated the species Pd-EPS that was used as catalyst precursor in the aqueous biphasic treatment of some nitrocompounds with hydrogen. Nitrobenzene was hydrogenated to aniline with almost quantitative yields and the catalyst, embedded in the aqueous phase, was used with success and with near the same efficiency in three recycling experiments. In the case of 1-iodo-4-nitrobenzene only nitrobenzene was obtained while the unsaturated nitro compound ß-methyl-ß-nitrostyrene afforded both the corresponding oxime and the saturated nitro derivative.
Assuntos
Hidrogênio/química , Klebsiella oxytoca/química , Compostos de Nitrogênio/química , Paládio/química , Polissacarídeos/química , Água/química , CatáliseRESUMO
A strain of Klebsiella oxytoca, isolated from acid pyrite-mine drainage, characteristically produces a ferric hydrogel, consisting of branched heptasaccharide repeating units exopolysaccharide (EPS), with metal content of 36 wt%. The high content of iron in the EPS matrix cannot be explained by a simple ferric ion bond to the sugar skeleton. The bio-generated Fe-EPS is investigated by X-ray absorption spectroscopy. Fe K-edge XANES analysis shows that iron is mostly in trivalent form, with a non-negligible amount of Fe(2+) in the structure. The Fe EXAFS results indicate that iron in the sample is in a mineralized form, prevalently in the form of nano-sized particles of iron oxides/hydroxides, most probably a mixture of different nano-crystalline forms. TEM shows that these nanoparticles are located in the interior of the EPS matrix, as in ferritin. The strain produces Fe-EPS to modulate Fe-ions uptake from the cytoplasm to avoid iron toxicity under anaerobic conditions. This microbial material is potentially applicable as iron regulator.
Assuntos
Ferro/química , Klebsiella oxytoca/metabolismo , Nanopartículas Metálicas/química , Polissacarídeos Bacterianos/química , Anaerobiose , Ferro/metabolismo , Klebsiella oxytoca/ultraestrutura , Nanopartículas Metálicas/ultraestrutura , Microscopia Eletrônica de Transmissão , Polissacarídeos Bacterianos/biossíntese , Espectroscopia por Absorção de Raios XRESUMO
Iron and palladium binding an exopolysaccharide (EPS) were obtained and purified from cultures of bacterial cells of Klebsiella oxytoca BAS-10. The strain BAS-10 was able to grow under anaerobic conditions with Fe(III)-citrate as energy and carbon source, producing Fe(III)-EPS that was extracted and used as catalyst in the oxidation reaction of phenol with H(2)O(2). The same bacterial strain was cultivated anaerobically with Na-citrate and Pd(2)(NO)(3) was added during the exponential growth to afford a Pd-EPS, named Bio-Pd (A), that, after isolation and purification, was used as catalyst in the reductive dehalogenation of chlorobenzene as model reaction. For comparison other two palladium binding polysaccharides were prepared: (a) a second type Pd-EPS, named Bio-Pd (B), was obtained by an exchange reaction with Pd acetate starting from an iron-free EPS produced by strain BAS-10 growing on Na-citrate medium; (b) a third type of palladium, named Bio-Pd (C), bound to a different polysaccharide, was recovered after the same exchange reaction applied on glycolipid emulsan obtained from an aerobic culture of Acinetobacter venetianus RAG 1. The superiority of Bio-Pd (A), as catalyst, vs Bio-Pd (B) and (C) was demonstrated. This approach to use microorganisms to prepare metal bound polysaccharides is novel and permits to prepare metal species, sequestrated in aqueous phase that can be useful either as catalysts for synthetic applications or to support the microbial biotransformation of pollutants.