RESUMO
We demonstrate excellent color quality of liquid-type white light-emitting diodes (WLEDs) using a combination of green light-emitting CsPbBr3 and red light-emitting CdSe/ZnS quantum dots (QDs). Previously, we reported red (CsPbBr1.2I1.8) and green (CsPbBr3) perovskite QDs (PQDs)-based WLEDs with high color gamut, which manifested fast anion exchange and stability issues. Herein, the replacement of red PQDs with CdSe/ZnS QDs has resolved the aforementioned problems effectively and improved both stability and efficiency. Further, the proposed liquid-type device possesses outstanding color gamut performance (132% of National Television System Committee and 99% of Rec. 2020). It also shows a high efficiency of 66 lm/W and an excellent long-term operation stability for over 1000 h.
RESUMO
This paper proposes a new encapsulation structure for aluminum nitride-based deep UV light-emitting diodes (DUV-LEDs) and eutectic flip chips containing polydimethylsiloxane (PDMS) fluid doped with SiO2 nanoparticles (NPs) with a UV-transparent quartz hemispherical glass cover. Experimental results reveal that the proposed encapsulation structure has considerably higher light output power than the traditional one. The light extraction efficiency was increased by 66.49% when the forward current of the DUV-LED was 200 mA. Doping the PDMS fluid with SiO2 NPs resulted in higher light output power than that of undoped fluid. The maximum efficiency was achieved at a doping concentration of 0.2 wt%. The optical output power at 200 mA forward current of the encapsulation structure with NP doping of the fluid was 15% higher than that without NP doping. The optical output power of the proposed encapsulation structure was 81.49% higher than that of the traditional encapsulation structure. The enhanced light output power was due to light scattering caused by the SiO2 NPs and the increased average refractive index. The encapsulation temperature can be reduced by 4 °C at a driving current of 200 mA by using the proposed encapsulation structure.
RESUMO
High-brightness white-light-emitting diodes (w-LEDs) with excellent color quality is demonstrated by using nontoxic nanomaterials. Previously, we have reported the high color quality w-LEDs with heavy-metal phosphor and quantum dots (QDs), which may cause environmental hazards. In the present work, liquid-type white LEDs composed of nontoxic materials, named as graphene and porous silicon quantum dots are fabricated with a high color rendering index (CRI) value gain up to 95. The liquid-typed device structure possesses minimized surface temperature and 25% higher value of luminous efficiency as compare to dispensing-typed structure. Further, the as-prepared device is environment friendly and attributed to low toxicity. The low toxicity and high R9 (87) component values were conjectured to produce new or improve current methods toward bioimaging application.
RESUMO
This study presents the low cost fabrication of flexible white-light-emitting diodes (w-LEDs) with nano-honeycomb-structured phosphor films. Extending the dimensions of the nano-honeycomb structures improved the color uniformity of the flexible samples, and the 950-nm pattern sample demonstrated optimal color uniformity because this nano-pattern exhibited an excellent diffusion ability owing to its pitch size. In addition to color uniformity, the use of this nano-pattern improved the luminous efficiency. The 750-nm pattern exhibited the highest luminous efficiency (235.8 lm/W), which was approximately 7% higher than that exhibited by a non-patterned phosphor film sample. Thus, flexible w-LEDs with nano-honeycomb structure optimization have great potential to be used as next-generation lighting sources.