Graphene Oxide: Key to Efficient Charge Extraction and Suppression of Polaronic Transport in Hybrids with Poly (3-hexylthiophene) Nanoparticles.

Nanoparticles (NPs) of conjugated polymers in intimate contact with sheets of graphene oxide (GO) constitute a promising class of water-dispersible nanohybrid materials of increased interest for the design of sustainable and improved optoelectronic thin-film devices, revealing properties exclusively pre-established upon their liquid-phase synthesis. In this context, we report for the first time the preparation of a P3HTNPs-GO nanohybrid employing a miniemulsion synthesis approach, whereby GO sheets dispersed in the aqueous phase serve as a surfactant. We show that this process uniquely favors a quinoid-like conformation of the P3HT chains of the resulting NPs well located onto individual GO sheets. The accompanied change in the electronic behavior of these P3HTNPs, consistently confirmed by the photoluminescence and Raman response of the hybrid in the liquid and solid states, respectively, as well as by the properties of the surface potential of isolated individual P3HTNPs-GO nano-objects, facilitates unprecedented charge transfer interactions between the two constituents. While the electrochemical performance of nanohybrid films is featured by fast charge transfer processes, compared to those taking place in pure P3HTNPs films, the loss of electrochromic effects in P3HTNPs-GO films additionally indicates the unusual suppression of polaronic charge transport processes typically encountered in P3HT. Thus, the established interface interactions in the P3HTNPs-GO hybrid enable a direct and highly efficient charge extraction channel via GO sheets. These findings are of relevance for the sustainable design of novel high-performance optoelectronic device structures based on water-dispersible conjugated polymer nanoparticles.

Kelvin Probe Microscopy Investigation of Poly-Octylthiophene Aggregates.

Conductive polymers have fundamental relevance as well as novel technological applications in the organic optoelectronics field. Their photophysical and transport properties strongly depend on the molecular arrangement, and nanoscale characterization is needed to fully understand the optoelectronic processes taking place in organic devices. In this work, we study the electrostatic properties of poly-3-octylthiophene isolated structures: disordered low-packed polymer chains and crystalline layered lamellar assemblies. We characterize the electronic ground state using Kelvin probe microscopy. This allows us to resolve a rich variety of surface potential regions that emerge over the different polymer structures. These SP regions are correlated with different molecular aggregates.

Nanoscale Charge Density and Dynamics in Graphene Oxide.

Graphene oxide (GO) is widely used as a component in thin film optoelectronic device structures for practical reasons because its electronic and optical properties can be controlled. Progress critically depends on elucidating the nanoscale electronic structure of GO. However, direct experimental access is challenging because of its disordered and nonconductive character. Here, we quantitatively mapped the nanoscopic charge distribution and charge dynamics of an individual GO sheet by using Kelvin probe force microscopy (KPFM). Charge domains are identified, presenting important charge interactions below distances of 20 nm. Charge dynamics with very long relaxation times of at least several hours and a logarithmic decay of the time correlation function are in excellent agreement with Monte Carlo simulations, revealing an universal hopping transport mechanism best described by Efros-Shklovskii's law.

Nanoscale J-aggregates of poly(3-hexylthiophene): key to electronic interface interactions with graphene oxide as revealed by KPFM.

The nanoscale aggregate structure of conjugated polymers critically determines the performance of organic thin film optoelectronic devices. Their impact on electronic interface interactions with adjacent layers of graphene, widely reported to improve the device characteristics, yet remains an open issue, which needs to be addressed by an appropriate benchmark system. Here, we prepared discrete ensembles of poly(3-hexylthiophene) nanoparticles and graphene oxide sheets (P3HTNPs-GO) with well-defined aggregate structures of either J- or H-type and imaged their photogenerated charge transfer dynamics across their interface by Kelvin probe force microscopy (KPFM). A distinctive inversion of the sign of the surface potential and surface photovoltage (SPV) demonstrates that J-aggregates are decisive for establishing charge transfer interactions with GO. These enable efficient injection of photogenerated holes from P3HTNPs into GO sheets over a range of tens of nanometers, causing a slow SPV relaxation dynamics, and define their operation as an efficient hole-transport layer (HTL). Conversely, H-type aggregates do not facilitate specific interactions and entrust GO sheets the role of charge-blocking layers (CBLs). The direct effect of the aggregate structure of P3HT on the functional operation of GO as a HTL or CBL thus establishes clear criteria towards the rational design of improved organic optoelectronic devices.

Nanophotoactivity of Porphyrin Functionalized Polycrystalline ZnO Films.

Kelvin probe force microscopy in darkness and under illumination is reported to provide nanoscale-resolved surface photovoltage maps of hybrid materials. In particular, nanoscale charge injection and charge recombination mechanisms occurring in ZnO polycrystalline surfaces functionalized with Protoporphyrin IX (H2PPIX) are analyzed. Local surface potential and surface photovoltage maps not only reveal that upon molecular adsorption the bare ZnO work function increases, but also they allow study of its local dependence. Nanometer-sized regions not correlated with apparent topographic features were identified, presenting values significantly different from the average work function. Depending on the region, the response to the light excitation is different, distinguishing two relaxation processes, one faster than the other. This behavior can be explained in terms of electrons trapped closed to the molecule-semiconductor interface or electrons pushed into the ZnO bulk, respectively. Moreover, the origin of these differences is correlated with the H2PPIX-ZnO bonding and molecules configuration and aggregation. The chenodeoxycholic acid (CDCA) coadsorption leads to a more homogeneous surface potential distribution, confirming the antiaggregate effect of this additive, while the surface photovoltage is mostly dominated by the slow relaxation component. This work reveals the complexity of real device architectures with ill-defined surfaces even in a relatively simple system with only one type of dye molecule and hightlights the importance of nanoscale characterization with appropriate tools.

Conducting polymers as electron glasses: surface charge domains and slow relaxation.

The surface potential of conducting polymers has been studied with scanning Kelvin probe microscopy. The results show that this technique can become an excellent tool to really 'see' interesting surface charge interaction effects at the nanoscale. The electron glass model, which assumes that charges are localized by the disorder and that interactions between them are relevant, is employed to understand the complex behavior of conducting polymers. At equilibrium, we find surface potential domains with a typical lateral size of 50 nm, basically uncorrelated with the topography and strongly fluctuating in time. These fluctuations are about three times larger than thermal energy. The charge dynamics is characterized by an exponentially broad time distribution. When the conducting polymers are excited with light the surface potential relaxes logarithmically with time, as usually observed in electron glasses. In addition, the relaxation for different illumination times can be scaled within the full aging model.

Domain formation by a Rhodococcus sp. biosurfactant trehalose lipid incorporated into phosphatidylcholine membranes.

The study of the interaction of biosurfactants with biological membranes is of great interest in order to gain insight into the molecular mechanisms of their biological actions. In this work we report on the interaction of a bacterial trehalose lipid produced by Rhodococcus sp. with phosphatidylcholine membranes. Differential scanning calorimetry measurements show a good miscibility of the glycolipid in the gel state and immiscibility in the fluid state, suggesting domain formation. These domains have been visualized and characterized, for the first time, by scanning force microscopy. Incorporation of trehalose lipid into phosphatidylcholine membranes produces a small shift of the antisymmetric stretching band toward higher wavenumbers, as shown by FTIR, which indicates a weak increase in fluidity. The C=O stretching band shows that incorporation of trehalose lipid increases the proportion of the dehydrated component in mixtures with the three phospholipids at temperatures below and above the gel to liquid-crystalline phase transition. This dehydration effect is also supported by data on the phospholipid P=O stretching bands. Small-angle X-ray diffraction measurements show that in the samples containing trehalose lipid the interlamellar repeat distance is larger than in those of pure phospholipids. These results are discussed within the frame of trehalose lipid domain formation, trehalose lipid/phospholipid interactions and its relevance to membrane-related biological actions.

Formation and rupture of Schottky nanocontacts on ZnO nanocolumns.

In this paper, the electrical transport and mechanical properties of Pt/ZnO Schottky nanocontacts have been studied simultaneously during the formation and rupture of the nanocontacts. By combining multidimensional conducting scanning force spectroscopy with appropriated data processing, the physical relevant parameters (the ideality factor, the Schottky barrier height, and the rupture voltage) are obtained. It has been found that the transport curves strongly depend on the loading force. For loading forces higher than a threshold value, the transport characteristics are similar to those of large-area Schottky contact, while below this threshold deviations from strictly thermionic emission are detected. Above the threshold, stable and reproducible Pt/ZnO nanocontacts with ideality factors of about 2 and Schottky barrier heights of around 0.45 eV have been obtained.

Nanogoniometry with scanning force microscopy: a model study of CdTe thin films.

In this paper scanning force microscopy is combined with simple but powerful data processing to determine quantitatively, on a sub-micrometer scale, the orientation of surface facets present on crystalline materials. A high-quality scanning force topography image is used to determine an angular histogram of the surface normal at each image point. In addition to the known method for the assignment of Miller indices to the facets appearing on the surface, a quantitative analysis is presented that allows the characterization of the relative population and morphological quality of each of these facets. Two different CdTe thin films are used as model systems to probe the capabilities of this method, which enables further information to be obtained about the thermodynamic stability of particular crystallographic facets. The method, which is referred to as nanogoniometry, will be a powerful tool to study in detail the surface of crystalline materials, particularly thin films, with sub-micrometer resolution.

Polarity effects on ZnO films grown along the nonpolar [1120] direction.

The surface electrical properties of ZnO thin films grown along the nonpolar [1120] direction have been investigated by Kelvin probe microscopy on a nanometer scale. Two different charge domains, with a 75 meV work function difference, coexist within the ZnO surface, which is covered by rhombohedral pyramids whose sidewalls are shown to be {1011}-type planes. The presence and relative orientation of the two kinds of charge domains are explained in terms of the atomic arrangement at the {1011} polar surfaces.

The role of intermolecular and molecule-substrate interactions in the stability of alkanethiol nonsaturated phases on Au(111).

The structure and stability of alkanethiols self-assembled on Au(111) have been studied as a function of the molecular chain length by means of atomic force microscopy (AFM) and grazing incidence X-ray diffraction (GIXD). Below saturation, phases consisting of molecules with different tilt angles and periodicities are formed. Differences in the mechanical stability of these phases are revealed by AFM experiments and discussed in terms of the competition between intermolecular and molecule-substrate interactions as a function of chain length. For long molecules, intermolecular interactions play a dominant role which stabilizes the formation of closed packed 30 degrees tilted ( radical 3x radical 3)R30 degrees structures. For short molecules, the van der Waals interaction with the gold substrate favors the formation of a 50 degrees tilted phase in which the molecules are arranged in a rectangular configuration.