Microbially Driven Iron Cycling Facilitates Organic Carbon Accrual in Decadal Biochar-Amended Soil.

Soil organic carbon (SOC) is pivotal for both agricultural activities and climate change mitigation, and biochar stands as a promising tool for bolstering SOC and curtailing soil carbon dioxide (CO2) emissions. However, the involvement of biochar in SOC dynamics and the underlying interactions among biochar, soil microbes, iron minerals, and fresh organic matter (FOM, such as plant debris) remain largely unknown, especially in agricultural soils after long-term biochar amendment. We therefore introduced FOM to soils with and without a decade-long history of biochar amendment, performed soil microcosm incubations, and evaluated carbon and iron dynamics as well as microbial properties. Biochar amendment resulted in 2-fold SOC accrual over a decade and attenuated FOM-induced CO2 emissions by approximately 11% during a 56-day incubation through diverse pathways. Notably, biochar facilitated microbially driven iron reduction and subsequent Fenton-like reactions, potentially having enhanced microbial extracellular electron transfer and the carbon use efficiency in the long run. Throughout iron cycling processes, physical protection by minerals could contribute to both microbial carbon accumulation and plant debris preservation, alongside direct adsorption and occlusion of SOC by biochar particles. Furthermore, soil slurry experiments, with sterilization and ferrous iron stimulation controls, confirmed the role of microbes in hydroxyl radical generation and biotic carbon sequestration in biochar-amended soils. Overall, our study sheds light on the intricate biotic and abiotic mechanisms governing carbon dynamics in long-term biochar-amended upland soils.

Pentavalent U Reactivity Impacts U Isotopic Fractionation during Reduction by Magnetite.

Meaningful interpretation of U isotope measurements relies on unraveling the impact of reduction mechanisms on the isotopic fractionation. Here, the isotope fractionation of hexavalent U [U(VI)] was investigated during its reductive mineralization by magnetite to intermediate pentavalent U [U(V)] and ultimately tetravalent U [U(IV)]. As the reaction proceeded, the remaining aqueous phase U [containing U(VI) and U(V)] systematically carried light isotopes, whereas in the bicarbonate-extracted solution [containing U(VI) and U(V)], the δ238U values varied, especially when C/C0 approached 0. This variation was interpreted as reflecting the variable relative contribution of unreduced U(VI) (δ238U < 0‰) and bicarbonate-extractable U(V) (δ238U > 0‰). The solid remaining after bicarbonate extraction included unextractable U(V) and U(IV), for which the δ238U values consistently followed the same trend that started at 0.3-0.5‰ and decreased to ∼0‰. The impact of PIPES buffer on isotopic fractionation was attributed to the variable abundance of U(V) in the aqueous phase. A few extremely heavy bicarbonate-extracted δ238U values were due to mass-dependent fractionation resulting from several hypothesized mechanisms. The results suggest the preferential accumulation of the heavy isotope in the reduced species and the significant influence of U(V) on the overall isotopic fractionation, providing insight into the U isotope fractionation behavior during its abiotic reduction process.

Overlooked role of aqueous chromate (VI) as a photosensitizer in enhancing the photochemical reactivity of ferrihydrite and production of hydroxyl radical.

The reactive oxygen species (ROS) photochemically generated from natural iron minerals have gained significant attention. Amidst the previous studies on the impact of heavy metal ions on ROS generation, our study addresses the role of the anion Cr(VI), with its intrinsic photoactivity, in influencing ROS photochemical generation with the co-presence of minerals. We investigated the transformation of inorganic/organic pollutants (Cr(VI) and benzoic acid) at the ferrihydrite interface, considering sunlight-mediated conversion processes (300-1000 nm). Increased photochemical reactivity of ferrihydrite was observed in the presence of aqueous Cr(VI), acting as a photosensitizer. Meanwhile, a positive correlation between hydroxyl radical (•OH) production and concentrations of aqueous Cr(VI) was observed, with a 650% increase of •OH generation at 50 mg L-1 Cr(VI) compared to systems without Cr(VI). Our photochemical batch experiments elucidated three potential pathways for •OH photochemical production under varying wet chemistry conditions: (1) ferrihydrite hole-mediated pathway, (2) chromium intermediate O-I-mediated pathway, and (3) chromium intermediates CrIV/V-mediated pathway. Notably, even in the visible region (> 425 nm), the promotion of aqueous Cr(VI) on •OH accumulation was observed in the presence of ferrihydrite and TiO2 suspensions, attributed to Cr(VI) photosensitization at the mineral interface. This study sheds light on the overlooked role of aqueous Cr(VI) in the photochemical reactivity of minerals, thereby enhancing our understanding of pollutant fate in acid mining-impacted environments.

Formation of soil organic carbon pool is regulated by the structure of dissolved organic matter and microbial carbon pump efficacy: A decadal study comparing different carbon management strategies.

To achieve long-term increases in soil organic carbon (SOC) storage, it is essential to understand the effects of carbon management strategies on SOC formation pathways, particularly through changes in microbial necromass carbon (MNC) and dissolved organic carbon (DOC). Using a 14-year field study, we demonstrate that both biochar and maize straw lifted the SOC ceiling, but through different pathways. Biochar, while raising SOC and DOC content, decreased substrate degradability by increasing carbon aromaticity. This resulted in suppressed microbial abundance and enzyme activity, which lowered soil respiration, weakened in vivo turnover and ex vivo modification for MNC production (i.e., low microbial carbon pump "efficacy"), and led to lower efficiency in decomposing MNC, ultimately resulting in the net accumulation of SOC and MNC. In contrast, straw incorporation increased the content and decreased the aromaticity of SOC and DOC. The enhanced SOC degradability and soil nutrient content, such as total nitrogen and total phosphorous, stimulated the microbial population and activity, thereby boosting soil respiration and enhancing microbial carbon pump "efficacy" for MNC production. The total C added to biochar and straw plots were estimated as 27.3-54.5 and 41.4 Mg C ha-1 , respectively. Our results demonstrated that biochar was more efficient in lifting the SOC stock via exogenous stable carbon input and MNC stabilization, although the latter showed low "efficacy". Meanwhile, straw incorporation significantly promoted net MNC accumulation but also stimulated SOC mineralization, resulting in a smaller increase in SOC content (by 50%) compared to biochar (by 53%-102%). The results address the decadal-scale effects of biochar and straw application on the formation of the stable organic carbon pool in soil, and understanding the causal mechanisms can allow field practices to maximize SOC content.

Mobilization of Colloid- and Nanoparticle-Bound Arsenic in Contaminated Paddy Soils during Reduction and Reoxidation.

The association of arsenic (As) with colloidal particles could facilitate its transport to adjacent water systems or alter its availability in soil-rice systems. However, little is known about the size distribution and composition of particle-bound As in paddy soils, particularly under changing redox conditions. Here, we incubated four As-contaminated paddy soils with distinctive geochemical properties to study the mobilization of particle-bound As during soil reduction and subsequent reoxidation. Using transmission electron microscopy-energy dispersive spectroscopy and asymmetric flow field-flow fractionation, we identified organic matter (OM)-stabilized colloidal Fe, most likely in the form of (oxy)hydroxide-clay composite, as the main arsenic carriers. Specifically, colloidal As was mainly associated with two size fractions of 0.3-40 and >130 kDa. Soil reduction facilitated the release of As from both fractions, whereas reoxidation caused their rapid sedimentation, coinciding with solution Fe variations. Further quantitative analysis demonstrated that As concentrations positively correlated with both Fe and OM concentrations at nanometric scales (0.3-40 kDa) in all studied soils during reduction and reoxidation, yet the correlations are pH-dependent. This study provides a quantitative and size-resolved understanding of particle-bound As in paddy soils, highlighting the importance of nanometric Fe-OM-As interactions in paddy As geochemical cycling.

Transformations of Ferrihydrite-Extracellular Polymeric Substance Coprecipitates Driven by Dissolved Sulfide: Interrelated Effects of Carbon and Sulfur Loadings.

The association of poorly crystalline iron (hydr)oxides with organic matter (OM), such as extracellular polymeric substances (EPS), exerts a profound effect on Fe and C cycles in soils and sediments, and their behaviors under sulfate-reducing conditions involve complicated mineralogical transformations. However, how different loadings and types of EPS and water chemistry conditions affect the sulfidation still lacks quantitative and systematic investigation. We here synthesized a set of ferrihydrite-organic matter (Fh-OM) coprecipitates with various model compounds for plant and microbial exopolysaccharides (polygalacturonic acids, alginic acid, and xanthan gum) and bacteriogenic EPS (extracted from Bacillus subtilis). Combining wet chemical analysis, X-ray diffraction, and X-ray absorption spectroscopic techniques, we systematically studied the impacts of C and S loadings by tracing the temporal evolution of Fe mineralogy and speciation in aqueous and solid phases. Our results showed that the effect of added OM on sulfidation of Fh-OM coprecipitates is interrelated with the amount of loaded sulfide. Under low sulfide loadings (S(-II)/Fe < 0.5), transformation to goethite and lepidocrocite was the main pathway of ferrihydrite sulfidation, which occurs more strongly at pH 6 compared to that at pH 7.5, and it was promoted and inhibited at low and high C/Fe ratios, respectively. While under high sulfide loadings (S(-II)/Fe > 0.5), the formation of secondary Fe-S minerals such as mackinawite and pyrite dominated ferrihydrite sulfidation, and it was inhibited with increasing C/Fe ratios. Furthermore, all three synthetic EPS proxies unanimously inhibited mineral transformation, while the microbiogenic EPS has a more potent inhibitory effect than synthetic EPS proxies compared at equivalent C/Fe loadings. Collectively, our results suggest that the quantity and chemical characteristics of the associated OM have a strong and nonlinear influence on the extent and pathways of mineralogical transformations of Fh-OM sulfidation.

Arsenopyrite dissolution in circumneutral oxic environments: The effect of pyrophosphate and dissolved Mn(III).

The oxidative dissolution of As from arsenopyrite, one important arsenic mineral in reducing conditions, poses an environmental hazard to natural aquatic systems. The dissolution of arsenopyrite occurs slowly due to the surface precipitates of iron oxides in circumneutral oxic environments. However, the presence of natural ligands and coexisting metals may change the release of Fe species, which would be of critical importance to the dissolution of arsenopyrite. Here, we investigated the oxidative dissolution of arsenopyrite induced by pyrophosphate (PP) and dissolved Mn(III) species as a natural occurring Mn species with strong complexation affinity to PP. With the presence of PP, the formation of Fe(II)-PP complexes and its rapid oxidation to dissolved Fe(III)-PP species resulted in a substantial increase in the generation of hydroxyl radicals (•OH) under ambient dark conditions, contributing to faster dissolution of arsenopyrite and higher percentage of As(V) in the dissolved products. Dissolved Mn(III), though considered as an extra oxidant besides oxygen, unexpectedly acted as a radical scavenger for •OH and inhibited the production of As(V). Moreover, the oxidation of sulfur species differed in the two systems as significant formation of thiosulfate was observed with the presence of PP, which did not occur in the system with dissolved Mn(III). Overall, the effects of dissolved Mn(III) and PP on the dissolution of arsenopyrite and the subsequent transformation of Fe, As and S species have important implications for disentangling the interactions among these metastable elements, and for assessing their transport and environmental impacts in aquatic systems.

Dissolution behaviors of a visible-light-responsive photocatalyst BiVO4: Measurements and chemical equilibrium modeling.

Despite of the extensive research in semiconductor photocatalysis with respect to material and device innovations, much of the fundamental aquatic chemistry of those new materials that governs their environmental hazard and implications remains poorly understood. BiVO4 has long been recognized as a promising visible-light-responsive photocatalyst. However, the solubility product (Ksp) of BiVO4 and the mechanistic understanding of the non-stoichiometric dissolution of BiVO4 remain unclear. Here, we investigated the solubility of BiVO4 via the observation on its non-stoichiometric dissolution in the pH range of 4-9. Combining dissolution experiments, adsorption behavior and thermodynamic equilibrium calculations, the Ksp of BiVO4 was determined to be 10-35.81±0.51. The solubility and stability of BiVO4 were strongly pH-dependent, with the lowest solubility and highest stability near pH 5. Furthermore, we tested the effect of illumination on the dissolution of BiVO4, which was significantly enhanced by light. Under both dark and illumination conditions, adsorption of dissolved bismuth by BiVO4 solids was the main reason for the non-stoichiometric dissolution of BiVO4, and could be modeled by including an additional surface complexation reaction. Thus, the results highlighted the importance of considering the dissolution of photocatalysts, and presented a feasible method to evaluate environmental stability and risks of other semiconductor materials.

Sunlight-Induced Interfacial Electron Transfer of Ferrihydrite under Oxic Conditions: Mineral Transformation and Redox Active Species Production.

Fe(II)-catalyzed ferrihydrite transformation under anoxic conditions has been intensively studied, while such mechanisms are insufficient to be applied in oxic environments with depleted Fe(II). Here, we investigated expanded pathways of sunlight-driven ferrihydrite transformation in the presence of dissolved oxygen, without initial addition of dissolved Fe(II). We found that sunlight significantly facilitated the transformation of ferrihydrite to goethite compared to that under dark conditions. Redox active species (hole-electron pairs, reactive radicals, and Fe(II)) were produced from the ferrihydrite interface via the photoinduced electron transfer processes. Experiments with systematically varied wet chemistry conditions probed the relative contributions of three pathways for the production of hydroxyl radicals: (1) oxidation of water (5.0%); (2) reduction of dissolved oxygen (40.9%); and (3) photolysis of Fe(III)-hydroxyl complexes (54.1%). Results also showed superoxide radicals as the main oxidant for Fe(II) reoxidation under acidic conditions, thus promoting the ferrihydrite transformation. The presence of inorganic ions (chloride, sulfate, and nitrate) did not only affect the hydrolysis and precipitation of Fe(III) but also the generation of radicals via photoinduced charge transfer reactions. The involvement of redox active species and the accompanying mineral transformations would exert a profound effect on the fate of multivalent elements and organic contaminants in aquatic environments.

Effect of Siderophore DFOB on U(VI) Adsorption to Clay Mineral and Its Subsequent Reduction by an Iron-Reducing Bacterium.

Uranium mining and nuclear fuel production have led to significant U contamination. Past studies have focused on the bioreduction of soluble U(VI) to insoluble U(IV) as a remediation method. However, U(IV) is susceptible to reoxidation and remobilization when conditions change. Here, we demonstrate that a combination of adsorption and bioreduction of U(VI) in the presence of an organic ligand (siderophore desferrioxamine B, DFOB) and the Fe-rich clay mineral nontronite partially alleviated this problem. DFOB greatly facilitated U(VI) adsorption into the interlayer of nontronite as a stable U(VI)-DFOB complex. This complex was likely reduced by bioreduction intermediates such as the Fe(II)-DFOB complex and/or through electron transfer within a ternary Fe(II)-DFOB-U(VI) complex. Bioreduction with DFOB alone resulted in a mobile aqueous U(IV)-DFOB complex, but in the presence of both DFOB and nontronite U(IV) was sequestered into a solid. These results provide novel insights into the mechanisms of U(VI) bioreduction and the stability of U and have important implications for understanding U biogeochemistry in the environment and for developing a sustainable U remediation approach.

Tracking microplastics biodegradation through CO2 emission: Role of photoaging and mineral addition.

Once microplastics (MPs) enter the terrestrial ecosystem, they may affect the assessment of soil carbon storage and the fluxes of greenhouse gases. This study showed microbial incubation diminished the size and dissolved organic carbon (DOC) content of MPs and introduced more oxygen-containing functional groups to MPs potentially through microbial colonization. The aged MPs generally showed higher carbon mineralization ratio (0.010-0.876 %) than the pristine MPs (0.007-0.189 %), which was supported by their higher enzyme activities and DOC content. Interestingly, four model minerals increased the DOC release and CO2 emission from MPs by altering MPs physicochemical properties and shaping the habitat for microbial growth. The higher enzyme activities in mineral artificial soils, except for montmorillonite, served as a potential valid explanation for their higher mineralization. The high CO2 emission but low enzyme activity in montmorillonite artificial soil was due to most DOC being already mineralized. Aging and minerals altered the microflora and enhanced the expression of some C metabolism- and N-related functional genes, which supplemented the cause of higher CO2 and N2O emissions from the corresponding artificial soils. Overall, the increased biomineralization of MPs carbon by minerals was divergent from the protective role of minerals on soil organic carbon.

Lead phosphate deposition in porous media and implications for lead remediation.

Phosphate addition is commonly applied as an effective method to remediate lead contaminated sites via formation of low solubility lead phosphate solids. However, subsequent transport of the lead phosphate particles may impact the effectiveness of this remediation strategy. Hence, this study investigates the mechanisms involved in the aggregation of lead phosphate particles and their deposition in sand columns as a function of typical water chemistry parameters. Clean bed filtration theory was evaluated to predict the particle deposition behavior, using Derjaguin-Landau-Verwey-Overbeek (DLVO) theory to estimate particle-substrate interactions. The observed particle deposition was not predictable from the primary energy barrier in clean bed filtration models, even in simple monovalent background electrolyte (NaNO3), because weak deposition in a secondary energy minimum prevailed even at low ionic strength, and ripening occurred at ionic strengths of 12.5 mM or higher. For aged (aggregated) suspensions, straining also occurred at 12.5 mM or higher. Aggregation and deposition were further enhanced at low total P/Pb ratios (i.e., P/Pb = 1) and in the presence of divalent cations, such as Ca2+ (≥ 0.2 mM), which resulted in less negative particle surface potentials and weaker electrostatic repulsion forces. However, the presence of 5 mg C/L of humic acid induced strong steric or electrosteric repulsion, which hindered particle aggregation and deposition even in the presence of Ca2+. This study demonstrates the importance of myriad mechanisms in lead phosphate deposition and provides useful information for controlling water chemistry in phosphate applications for lead remediation.

Persistence of the Isotopic Signature of Pentavalent Uranium in Magnetite.

Uranium isotopic signatures can be harnessed to monitor the reductive remediation of subsurface contamination or to reconstruct paleo-redox environments. However, the mechanistic underpinnings of the isotope fractionation associated with U reduction remain poorly understood. Here, we present a coprecipitation study, in which hexavalent U (U(VI)) was reduced during the synthesis of magnetite and pentavalent U (U(V)) was the dominant species. The measured δ238U values for unreduced U(VI) (∼-1.0‰), incorporated U (96 ± 2% U(V), ∼-0.1‰), and extracted surface U (mostly U(IV), ∼0.3‰) suggested the preferential accumulation of the heavy isotope in reduced species. Upon exposure of the U-magnetite coprecipitate to air, U(V) was partially reoxidized to U(VI) with no significant change in the δ238U value. In contrast, anoxic amendment of a heavy isotope-doped U(VI) solution resulted in an increase in the δ238U of the incorporated U species over time, suggesting an exchange between incorporated and surface/aqueous U. Overall, the results support the presence of persistent U(V) with a light isotope signature and suggest that the mineral dynamics of iron oxides may allow overprinting of the isotopic signature of incorporated U species. This work furthers the understanding of the isotope fractionation of U associated with iron oxides in both modern and paleo-environments.

Combined Effects of Fe(III)-Bearing Clay Minerals and Organic Ligands on U(VI) Bioreduction and U(IV) Speciation.

Reduction of U(VI) to U(IV) drastically reduces its solubility and has been proposed as a method for remediation of uranium contamination. However, much is still unknown about the kinetics, mechanisms, and products of U(VI) bioreduction in complex systems. In this study, U(VI) bioreduction experiments were conducted with Shewanella putrefaciens strain CN32 in the presence of clay minerals and two organic ligands: citrate and EDTA. In reactors with U and Fe(III)-clay minerals, the rate of U(VI) bioreduction was enhanced due to the presence of ligands, likely because soluble Fe3+- and Fe2+-ligand complexes served as electron shuttles. In the presence of citrate, bioreduced U(IV) formed a soluble U(IV)-citrate complex in experiments with either Fe-rich or Fe-poor clay mineral. In the presence of EDTA, U(IV) occurred as a soluble U(IV)-EDTA complex in Fe-poor montmorillonite experiments. However, U(IV) remained associated with the solid phase in Fe-rich nontronite experiments through the formation of a ternary U(IV)-EDTA-surface complex, as suggested by the EXAFS analysis. Our study indicates that organic ligands and Fe(III)-bearing clays can significantly affect the microbial reduction of U(VI) and the stability of the resulting U(IV) phase.

Nanoscale mechanism of UO2 formation through uranium reduction by magnetite.

Uranium (U) is a ubiquitous element in the Earth's crust at ~2 ppm. In anoxic environments, soluble hexavalent uranium (U(VI)) is reduced and immobilized. The underlying reduction mechanism is unknown but likely of critical importance to explain the geochemical behavior of U. Here, we tackle the mechanism of reduction of U(VI) by the mixed-valence iron oxide, magnetite. Through high-end spectroscopic and microscopic tools, we demonstrate that the reduction proceeds first through surface-associated U(VI) to form pentavalent U, U(V). U(V) persists on the surface of magnetite and is further reduced to tetravalent UO2 as nanocrystals (~1-2 nm) with random orientations inside nanowires. Through nanoparticle re-orientation and coalescence, the nanowires collapse into ordered UO2 nanoclusters. This work provides evidence for a transient U nanowire structure that may have implications for uranium isotope fractionation as well as for the molecular-scale understanding of nuclear waste temporal evolution and the reductive remediation of uranium contamination.

Cr(VI) Adsorption on Engineered Iron Oxide Nanoparticles: Exploring Complexation Processes and Water Chemistry.

Surface-functionalized magnetic nanoparticles are promising adsorbents due to their large surface areas and ease of separation after contaminant removal. In this work, the affinity of Cr(VI) adsorption to 8 nm surface-functionalized superparamagnetic magnetite nanoparticles was determined for surface coatings with amine (trimethyloctadecylammonium bromide, CTAB) and carboxyl (stearic acid, SA) functional groups. Cr(VI) adsorbed more strongly to the CTAB-coated nanoparticles than to the SA-coated materials due to electrostatic interactions between positively charged CTAB and anionic Cr(VI) species. The adsorption of Cr(VI) by CTAB- and SA-coated nanoparticles increased with decreasing pH (4.5-10), which could be simulated by a surface complexation model. Cr(VI) removal performance by the nanocomposite was evaluated for two realistic drinking water compositions. The co-occurrence of divalent cations (Ca2+ and Mg2+) and Cr(VI) resulted in decreased Cr(VI) adsorption as particles were destabilized, leading to the aggregation and lower effective surface area, confirming the importance of the overall water composition on the performance of novel engineered nanomaterials for water treatment applications.

Water metal contaminants in a potentially mineral-deficient population of Haiti.

This study aimed to characterize metal contaminant concentrations and assess temporal and spatial variability in the main drinking water sources of Cap-Haïtien, Haiti. Water sources from five communities were sampled in two seasons, June (2014) and October (2014), and analysed for a suite of metals. A geographic information system was used to examine the spatial distribution of sampling points. Metal concentrations were below the US Environmental Protection Agency (USEPA) primary drinking water standards. Mean manganese concentrations were comparatively higher in wells (254.5 µg/L), exceeding the USEPA secondary drinking water standard (50 µg/L). Higher mean Mg/Ca and Ba/Ca ratios (range 2.3-3.4) may indicate different interactions between seawater and groundwater throughout the year. Although metal concentrations were within the limits of the USEPA drinking water standards, emerging contaminants, such as manganese, showed concentrations in excess of recommended limits. These metals may interact with background nutritional status with potential implications for growth and development.

Speciation of phosphorus in plant- and manure-derived biochars and its dissolution under various aqueous conditions.

Phosphorus (P) in biochar serves as both a P source for plant growth and a contributor to water eutrophication, thus prioritizing the efficient management of P in biochar. This study employed solid- and solution- state 31P-nuclear magnetic resonance and X-ray diffraction analyses to explore the impact of feedstock and heating treatment temperature (HTT) on P species of biochars. The effects of ambient temperature, coexisting anions, pH and nutrient solution on P release were also investigated to study the effect of various environmental factors on P release from biochars. P species in both plant- and manure- derived biochars were dominated by inorganic orthophosphate and pyrophosphate (mainly calcium-bound-phosphates). The HTT of biochar showed a negative impact upon its pyrophosphate content. Compared with plant biochars, manure biochars contained higher P but had a lower release degree. Release of P from biochars was controlled by diffusion-dissolution process and was enhanced by higher ambient temperature, co-existing anions, and both acidic and alkaline conditions but inhibited by coexisting Hoagland nutrients. Anion-induced increase in P release was more significant for plant biochars than manure biochars. These findings help to adjust favorable environmental conditions for the full utilization of P in biochars.

Enhanced Uranium Immobilization by Phosphate Amendment under Variable Geochemical and Flow Conditions: Insights from Reactive Transport Modeling.

Phosphate amendment has shown promise for enhancing uranium immobilization. The mechanism of the enhancement, however, has remained unclear with contrasting observations under variable environmental conditions. A dual-domain reactive transport model is developed here with constraints from batch and column experimental data to understand the mechanisms and to explore the effectiveness of enhanced U(VI) immobilization under variable geochemical and flow conditions. Modeling results indicate that under low U(VI) conditions in natural waters, phosphate addition promotes U(VI) immobilization through the formation of U(VI)-phosphate ternary surface complexes and the precipitation of calcium phosphate, both decreasing the concentrations of mobile U-Ca-CO3 aqueous complexes. This contrasts with previous hypotheses attributing the immobilization enhancement to U(VI)-phosphate precipitation under experimental conditions with high U(VI). Sensitivity analysis shows that phosphate is effective under relatively low Ca (<0.1 mM) and total inorganic carbon (TIC) (<0.5 mM) conditions, where >60% of U(VI) still remains on sediments after 113 residence times of flushing with low phosphate solutions (<0.1 mM). Under high Ca or TIC conditions, a similar level of U(VI) immobilization can be achieved only when the phosphate concentration is higher than Ca or TIC concentrations. Compared to the strong geochemical effects, flow conditions have relatively limited impacts on U(VI) immobilization. These results explain contrasting field observations on the effectiveness of phosphate amendment and offer capabilities to extrapolate observations to other environmental conditions.

Measurement and Surface Complexation Modeling of U(VI) Adsorption to Engineered Iron Oxide Nanoparticles.

Surface-functionalized magnetite nanoparticles have high capacity for U(VI) adsorption and can be easily separated from the aqueous phase by applying a magnetic field. A surface-engineered bilayer structure enables the stabilization of nanoparticles in aqueous solution. Functional groups in stearic acid (SA), oleic acid (OA), and octadecylphosphonic acid (ODP) coatings led to different adsorption extents (SA≈ OA > ODP) under the same conditions. The impact of water chemistry (initial loading of U(VI), pH, and the presence of carbonate) has been systematically examined for U(VI) adsorption to OA-coated nanoparticles. A diffuse double layer surface complexation model was developed for surface-functionalized magnetite nanoparticles that could simulate both the measured surface charge and the U(VI) adsorption behavior at the same time. With a small set of adsorption reactions for uranyl hydroxide and uranyl carbonate complexes to surface sites, the model can successfully simulate the entire adsorption data set over all uranium loadings, pH values, and dissolved inorganic carbon concentrations. The results show that the adsorption behavior was related to the changing U(VI) species and properties of surface coatings on nanoparticles. The model could also fit pH-dependent surface potential values that are consistent with measured zeta potentials.