New Method for 5'-Nucleotidase Preparation and Evaluation of Its Catalytic Activity.

In this study, we established a new methodology for preparing 5'-nucleotidase (5'-NT) with the aim of enhancing our understanding of its enzyme activity and laying a basis for regulating the content of umami-enhancing nucleotides in pork. 5'-NT was prepared with Sephadex gel filtration and reverse-phase high-performance liquid chromatography, and its enzymatic properties and catalytic activity were evaluated. The results show that the molecular weight of the prepared 5'-NT was 57 kDa, the optimal catalytic temperature was 40 °C, and the optimal pH was 8. Zn2+, and sucrose showed inhibitory effects on the activity of 5'-NT, while K+, Na+, Ca2+, Mg2+, glucose, fructose, and trehalose promoted the activity of the studied compound. The prepared 5'-NT exhibited higher catalytic activity and selectivity against IMP compared with its commercial counterpart, while its catalytic activity against XMP was not significant (p > 0.05). In brief, we established a new methodology for preparing 5'-NT, enhancing our understanding of its enzyme activity and providing a solid basis for regulating the content of umami-enhancing nucleotides in pork through the control of endogenous 5'-NT activity.

Research progress in the application of catalytic infrared technology in fruit and vegetable processing.

Fruit and vegetable processing can effectively maintain the quality and safety of fruit and vegetable-based products while extending the shelf life of products and saving transportation costs. Infrared (IR) technology has been widely used in many operating units of fruit and vegetable processing because of its versatility of uniform heating, high heat transfer efficiency, and minimized damage to fruit and vegetable tissues. Catalytic IR (CIR), compared to traditional electric IR, is powered by natural gas or liquefied gas, which can improve thermal efficiency while significantly saving energy. However, there is no comprehensive overview discussing and summarizing the utilization and application of the CIR technology in fruit and vegetable processing. Therefore, this review aims to highlight recent advances in the application of CIR technology in fruit and vegetable processing. Specifically, a comprehensive discussion of the physicochemical properties and underlying mechanisms of CIR is provided, and its applications as a single method or in combination with other technologies in fruit and vegetable processes, such as blanching, peeling, microbial population reduction, and drying, are also presented. Besides, the currently used laboratory and pilot-scale equipment of CIR has also been summarized.

Effects of Cooking Processes on Protein Nutritional Values and Volatile Flavor Substances of Silver Carp (Hypophthalmichthys molitrix).

Silver carp (Hypophthalmichthys molitrix) is normally cooked at a high temperature. In order to explore the effects of cooking methods on the protein nutritional values and volatile flavor substances of silver carp meat, the meat was fried, roasted and steamed, and its contents were determined in relation to moisture, protein, fat, ash, amino acids and volatile flavor substances. The results show that the moisture content of cooked silver carp can be ranked as follows: raw > steamed > roasted > fried. The protein content order of the four samples can be ranked: fried > roasted > raw > steamed. The ash and the fat contents of the four samples showed similar significant (p < 0.05) differences, in the order of fried > roasted > steamed > raw. The contents of all the amino acids in the fried meat were significantly (p < 0.05) higher than the contents in others, and the frying, roasting and steaming processes improved the umami taste (supported by the increased content of glutamate and aspartate) and the protein nutritional value (supported by the amino acid score, essential amino acid index and protein efficiency ratio) of the silver carp meat. A total of 51 compounds were detected in the fried, roasted and steamed meat. Frying and roasting reduced the fishy flavor of this meat. The odor activity value (OAV) indicated that methanethiol, 1-octen-3-ol and 2-heptanone were the key flavor chemicals in raw meat. Hexanal, propionaldehyde, octanal, nonanal, decanal, 1-octen-3-ol and 2-heptanone were key to the flavor of fried meat. Pentanal, decanal, methyl mercap-tan and 1-octen-3-ol contributed greatly to the overall flavor of the roasted meat. Nonanal, methylmercaptan and 1-octene-3-ol had strong effects on the flavor of the steamed silver carp meat.

Nitrite and nitrate in meat processing: Functions and alternatives.

Meat and meat products are important foods in the human diet, but there are concerns about their quality and safety. The discovery of carcinogenic and genotoxic N-nitroso compounds (NOCs) in processed meat products has had serious negative impacts on the meat industry. In order to clarify the relationship between the use of nitrite or nitrate and the safety of meat or meat products, we reviewed NOCs in meat and meat products, the origin and safety implications of NOCs, effects of nitrite and nitrate on meat quality, national regulations, recent publications concerning the using of nitrite and nitrate in meat or meat products, and reduction methods. By comparing and analyzing references, (1) we found antioxidant, flavor improvement and shelf-life extension effects were recently proposed functions of nitrite and nitrate on meat quality, (2) the multiple functions of nitrite and nitrate in meat and meat products couldn't be fully replaced by other food additives at present, (3) we observed that the residual nitrite in raw meat and fried meat products was not well monitored, (4) alternative additives seem to be the most successful methods of replacing nitrite in meat processing, currently. The health risks of consuming processed meat products should be further evaluated, and more effective methods or additives for replacing nitrite or nitrate are needed.

Effect of Deep Dormancy Temperature Cultivation on Meat Quality of Crucian Carp (Carassius auratus).

To extend the survival of crucian carp (Carassius auratus) during transportation, the effect of deep dormancy temperature (DDT) cultivation on the crucian carp was investigated by measuring the respiratory rate, survival time, and effect of cooling speed on the meat quality. The results of the respiratory rate and survival time indicated that the DDT of the crucian carp was 1.6 °C. The cooling speed had a significant (p < 0.05) influence on the quality of the crucian carp meat, with a faster cooling speed resulting in a lower pH, L* value, a* value, gumminess, springiness, cohesiveness, stickiness, chewiness, CMP, and UMP content for the crucian carp meat, thus resulting in a lower sensory score for the crucian carp meat. A possible reason for the decrease in the quality of the crucian carp meat is that the faster cooling speed led to a strong stress response and higher anaerobic metabolism in the crucian carp. This can be supported by the contents of the blood glucose and lactic acid in the crucian carp treated with higher cooling speed being significantly (p < 0.05) higher than that of the control. Combining all the results of the cooling speed on the eating quality of the crucian carp meat, a cooling speed of 2 °C/h followed by 1 °C/h was suggested for the survival of crucian carp in transit.

Effect of 4 °C and ice temperature on umami-enhancing nucleotides of conditioned pork.

To study new methods to delay the umami taste attenuation of the conditioned pork, the ice temperature of pork, the content of nucleotides, lactic acid, pyruvate, glycogen, and activity of key endogenous enzymes were determined for the conditioned pork stored at 4 °C and ice temperature. The results indicated that the ice temperature of the pork ham bicipital muscle was -1.4 °C. The content of umami-enhancing nucleotides in pork stored at 4 °C decreased significantly (p < 0.05) with increasing aging time, but all umami-enhancing nucleotides in pork stored at ice temperature were decreased significantly (p < 0.05), but the decrease rates were lower than those in pork stored at 4 °C. A possible reason for this was that the storage temperature influenced the activity of endogenous enzymes and glycolysis. Ice temperature storage was an effective method to inhibit the decrease in umami taste nucleotides in conditioned pork.

Comparison of Nutrition and Flavor Characteristics of Five Breeds of Pork in China.

To characterize the quality of widely consumed pork in China, the chemical compositions and other indexes of five breeds of pork were compared. The results indicated that the moisture content, sensory flavor, and overall acceptability of Pipa pork (PPP) were superior to other breeds. The fat content and essential amino acids (EAA) of Yihao native pork (YNP) were significantly (p < 0.05) higher than in other breeds. The protein content, the total amount of amino acids, and perceptible flavor of Tibetan black pork (TBP) were higher than in other breeds. The protein nutrition profiles of manor black pork (MBP) and TBP were better than in others. The equivalent umami concentration (EUC) value of white pork (WP) was significantly (p < 0.05) higher than in others; however, the health risk of its fatty acid content was higher. There were unique protein and flavor chemicals in YNP, TBP, and PPP, which may be useful for distinguishing their authenticity.

Storage Stability and Flavor Change of Marinated Pork.

To evaluate the storage stability and flavor changes of marinated pork treated with chili and pepper essential oils, the contents of total sulfhydryl, malondialdehyde, total volatile base nitrogen (TVBN), Ca2+ATPase activity, and total viable counts of marinated pork were determined. Further, the non-volatile (umami, numb, and spicy) and volatile flavor compounds of marinated pork were analyzed. Based on the results, the chili and pepper essential oils had limited effects on the storage stability of marinated pork. However, these essential oils could inhibit the oxidation of lipids and proteins and reduce the number of microorganisms and TVBN in marinated pork within 6 days. The non-volatile flavors of the marinated pork decreased as the refrigeration time increased. It was concluded that the decomposition of umami-enhancing nucleotides (GMP, IMP, XMP), the number of flavor substances (hydroxyl-α-sanshool, hydroxyl-ß-sanshool), and spicy (capsaicin) tasting compounds caused the decrease in non-volatile flavors.

The effect of high humidity hot air impingement blanching on the changes in cell wall polysaccharides and phytochemicals of okra pods.

BACKGROUND: Okra pods contain heat-sensitive substances, such as phenolic compounds and other phytochemicals that can be degraded when okra pods are subjected to heat treatment. The understanding of the impact of high humidity hot air impingement blanching (HHAIB) on the changes in physicochemical properties of polysaccharides and phytochemicals of okra pods is of great importance because over-blanching may result in cell membrane disruption and changes in biologically active compounds under prolonged exposure to the thermal treatment. Therefore, the present study aimed to investigate the effect of HHAIB on the changes in physicochemical properties of pectins and phytochemicals extracted from okra pods. RESULTS: Both the HHAIB time and method of extraction influenced their physicochemical characteristics and biological activity. Pectin fractions subjected to HHAIB were composed of polygalacturonic acid, rhamnogalacturonan, glucomannan, galactan, mannose, arabinose, rhamnose, calcium pectate and arabinogalactan. The contents of total phenolics, total flavonoids and antioxidant activity of extracts mostly increased during HHAIB (i.e. up to 19.0%, 13.2% and 35.3%, respectively). However, HHAIB reduced the chlorophyll-a (up to 55.7%) and lycopene (up to 52.6%) contents of okra pods. CONCLUSION: The acquired knowledge may be useful for better understanding and optimization of technologies based on HHAIB treatment. The HHAIB treated okra can be a promising natural alternative in different applications, including its use as a replacement of some ingredients in food or non-food systems as a result of richness in polysaccharides and polyphenols, as well as high antioxidant properties. © 2022 Society of Chemical Industry.

Postharvest processing of tree nuts: Current status and future prospects-A comprehensive review.

Tree nuts are important economic crops and are consumed as healthy snacks worldwide. In recent years, the increasing needs for more efficient and effective postharvest processing technologies have been driven by the growing production, higher quality standards, stricter food safety requirements, development of new harvesting methods, and demand to achieve energy saving and carbon neutralization. Among all, the technologies related to drying, disinfection, and disinfestation and downstream processes, such as blanching, kernel peeling, and roasting, are the most important processes influencing the quality and safety of the products. These processes make up the largest contribution to the energy consumptions and environmental impacts stemming from tree nut production. Although many studies have been conducted to improve the processing efficiency and sustainability, and preserve the product quality and safety, information from these studies is fragmented and a centralized review highlighting the important technology advancements of postharvest processing of tree nuts would benefit the industry. In this comprehensive review, almonds, walnuts, and pistachios are selected as the representative crops of tree nuts. Current statuses, recent advances, and ongoing challenges in the scientific research as well as in the industrial processing practices of these tree nuts are summarized. Some new perspectives and applications of tree nut processing waste and by-products (such as the hulls and shells) are also discussed. In addition, future trends and research needs are highlighted. The material presented here will help both stakeholders and scientists to better understand postharvest tree nut processing and provide technological recommendations to improve the efficiency and sustainability, product quality and safety, and competitiveness of the industry.

The capability of Bacillus pseudomycoides from soil to remove Cu(II) in water and prevent it from entering plants.

AIMS: Copper ion is widespread in wastewater and threatens the condition and human health. Micro-organisms have unique advantages to remove heavy-metal ions from water, but are rarely reported in the removal of copper ion. This aims to develop micro-organisms that can remove copper ion in water, characterize their properties and analyse their potential application in practice. METHODS AND RESULTS: Sewage sludge was used as the source to isolate wild bacteria that can remove copper ion in water. The most efficient strain was screened out from 23 obtained isolates, identified as Bacillus pseudomycoides and coded as C6. The properties of C6 in the removal of copper ion in water were investigated in the aspects of reaction conditions, reaction groups, reaction dynamic and the application in oat planting. The reaction at pH 7 within 10 min yielded the highest removal rate of copper ion, 83%. The presence of lead ion in the reaction system could promote the removal rate of copper ion. Carboxyl groups and amidogen of C6 biomass were mainly involved in the removal of copper ion. The removal of copper ion was in accord with single-layer adsorption and Langmuir adsorption isotherm model. In application, C6 biomass reduced the copper content in the oat seedlings grown in copper ion containing water by more than seven times. CONCLUSIONS: B. pseudomycoides C6 can efficiently remove copper ion in water and inhibit it from entering plants. SIGNIFICANCE AND IMPACT OF STUDY: This is the first time to report the capability of B. pseudomycoides to remove copper ion in water, which is also more efficient than the currently reported chemical and biological methods.

A comprehensive review on innovative and advanced stabilization approaches of anthocyanin by modifying structure and controlling environmental factors.

Anthocyanins are pigments abundant in fruits and vegetables, and commonly applied in foods due to attractive colour and health-promoting benefits. However, instability of anthocyanins leads to their easy degradation, reduced bioactivity, and colour fading in food processing, limiting their application and causing economic losses. Stability of anthocyanins depends on their own structures and environmental factors. For structural factors, modification including copigmentation, acylation and biosynthesis is a potential solution to increase anthocyanin stability due to forming stable structures. With regard to environmental factors, encapsulation such as microencapsulation, liposome and nanoparticles has been shown effectively to enhance the stability. We proposed the potential challenges and perspectives for the diversification of anthocyanin-rich products for food application, particularly, introduction of hazards, technical limitations, interaction with other ingredients in food system and exploration of pyranoanthocyanins. The integrated strategies are warranted for improving anthocyanin stabilization for promoting their further application in food industry.

Guidelines on reporting treatment conditions for emerging technologies in food processing.

In the last decades, different non-thermal and thermal technologies have been developed for food processing. However, in many cases, it is not clear which experimental parameters must be reported to guarantee the experiments' reproducibility and provide the food industry a straightforward way to scale-up these technologies. Since reproducibility is one of the most important science features, the current work aims to improve the reproducibility of studies on emerging technologies for food processing by providing guidelines on reporting treatment conditions of thermal and non-thermal technologies. Infrared heating, microwave heating, ohmic heating and radiofrequency heating are addressed as advanced thermal technologies and isostatic high pressure, ultra-high-pressure homogenization sterilization, high-pressure homogenization, microfluidization, irradiation, plasma technologies, power ultrasound, pressure change technology, pulsed electric fields, pulsed light and supercritical CO2 are approached as non-thermal technologies. Finally, growing points and perspectives are highlighted.

Effect of nano-silica coating combined with pressurized Ar treatment on postharvest quality and reactive oxygen species metabolism in sweet cherry fruit.

The mechanisms of effect of nano-silica coating and pressurized Ar on regulating reactive oxygen species (ROS) generation and scavenging in the senescence of sweet cherries remains unclear. The amounts of reactive oxygen species, hydrogen peroxide, non-enzymatic antioxidants and antioxidases, and cell membrane lipid peroxidation in sweet cherries were determined. Nano-silica coating, pressurized Ar, and the combination of these two treatments, all significantly delayed senescence by suppressing decay rate, and maintained good sensory quality. In additional, all treatments inhibited the generation and accumulation of superoxide anion and hydrogen peroxide, and mitigated the lipid peroxidation of cell membranes of sweet cherries. The combination of these two treatments maintained higher contents of ascorbic acid and glutathione, and enhanced the activities of antioxidases in sweet cherries. It is suggested that nano-silica coating and pressure Ar mediated the ROS metabolism, which might have a role in retaining the quality sweet cherries during cold storage.

Vacuum and Infrared-Assisted Hot Air Impingement Drying for Improving the Processing Performance and Quality of Poria cocos (Schw.) Wolf Cubes.

The objective of this study was to develop an efficient drying technology for poria cubes in order to improve product quality. Poria cubes were dried using different methods, including air impingement drying, infrared-assisted air impingement drying, vacuum drying, two-stage vacuum drying, and infrared-assisted air impingement drying. The results were compared with those from hot air drying. For the two-stage drying, the tested conditions were the first stage of vacuum drying with temperatures between 65-85 °C and a switching moisture ratio of 70-90%. The second stage infrared-assisted air impingement drying also had temperatures 65-85 °C. The drying kinetics (effective moisture diffusivity (Deff), Biot number (Bi), and mass transfer coefficient (k) were studied via the product qualities (broken ratio, firmness, microstructure, and water-soluble polysaccharide content) and specific energy consumption (SEC) of the drying processes. The results showed that two-stage drying led to the lowest drying time and energy consumption, and also obtained the best qualities. Box-Behnken experimental design with response surface methodology (RSM) was used to optimize the two-stage operating conditions as 82 °C under vacuum drying until a moisture content of 81% and a temperature of 69 °C with infrared-assisted air impingement drying was achieved. These findings suggested that two-stage vacuum and infrared-assisted air impingement drying is a promising method for producing high quality and energy efficient dried poria cubes.

Characterization of umami compounds in bone meal hydrolysate.

The objective of this research was to identify and characterize the chemical compounds that exhibited monosodium glutamate (MSG)-like taste in the hydrolyzed bone meal produced by using flavourzyme. The free amino acids and peptides in the bone meal hydrolysate were analyzed. The results showed that the glutamic acid and the aspartic acid in the bone meal increased by 13.1 times and 14.2 times, respectively, after the flavourzyme hydrolysis. The peptides' isolation identified six MSG-like peptides in the hydrolysate, including APGPVGPAG, DAINWPTPGEIAH, FLGDEETVR, GVDEATIIEILTK, PAGPVGPVG, and VAPEEHPTL, which should contribute to the taste. The human sensory evaluation results indicated that the six peptides showed MSG-like taste, and the electronic tongue analysis indicated that the six peptides showed sourness, saltiness, bitterness, and astringency. The findings of this study demonstrated that the MSG-like taste of the bone meal hydrolysate should be attributed to the generation of MSG-like amino acids and peptides from the flavourzyme hydrolysis. PRACTICAL APPLICATION: The manuscript describes the umami compounds in the bone meal hydrolysate. The findings from this study should further confirm the feasibility of using bone meal to prepare meat-flavor essence and provide a better understanding of preparing bio-source flavoring peptides, which is very important to the artificial meat development and gene breeding.

Antifungal activity of silver nanoparticles synthesized by iturin against Candida albicans in vitro and in vivo.

Candida albicans (C. albicans) is a fungal pathogen that is difficult to cure clinically due to lack of effective antifungal agents with low toxicity. In this study, iturin, a cyclic peptide having wide antifungal spectrum, was used to synthesize nanosilver particles (AgNPs), and a complex of iturin-AgNPs was formed. The antifungal activity of iturin-AgNPs against C. albicans and its mechanisms were tested in vitro. Iturin-AgNPs were also loaded in chitosan (CS) composite dressing and applied to skin wound healing in mice. As results, iturin-AgNPs showed excellent antifungal activity with the minimum inhibitory concentrations (MIC) of 1.25, 2.5, and 5 µg/mL at C. albicans concentrations of 1×105, 1×106, and 1×107 CFU/mL, respectively. The MIC value still kept at 2.5 µg/mL against C. albicans (105 CFU/mL) after 15 regeneration, showing less induction of drug resistance to the pathogenic fungus. The antifungal mechanisms of iturin-AgNPs against C. albicans were identified as the increase of membrane permeability, damage of cell membrane integrity, and leakage of cellular protein and nucleic acids. No toxicity was found for iturin-AgNPs to HaCaT cells at concentrations of lower than 10 µg/mL. In wound healing application, iturin-AgNP CS composite dressing significantly accelerated the healing of C. albicans infected skin wounds at the early 10 days. In conclusion, iturin-AgNPs were developed as an efficient antifungal agent against C. albicans in vitro and in vivo and showed potential application in wound healing promotion.

Antibacterial and wound healing-promoting effect of sponge-like chitosan-loaded silver nanoparticles biosynthesized by iturin.

Silver nanoparticles (AgNPs) are widely used in wound dressing, but are limited in the application due to its high toxicity at effective concentrations. iturin-AgNPs was previously found to have much higher antibacterial activity at lower AgNPs content than the commercial AgNPs. To verify its potential application in the promotion of wound healing, a chitosan (CS) composite sponge dressing-loaded iturin-AgNPs was developed and evaluated for their antibacterial activity in vitro and used for wound healing in vivo. As results, the synthesized CS dressing had high porosity and water absorption. As expected, the antibacterial activity of CS dressing was significantly promoted by the incorporation of iturin-AgNPs. The CS dressing-loaded iturin-AgNPs showed more effective inhibition of bacterial infection and promotion of wound healing processing and quality than the commercial wound dressing loaded AgNPs in vivo. The mechanisms for the promotion of wound healing by the CS dressing-loaded iturin-AgNPs were found as the enhancement of re-epithelialization and collagen formation, as well as the increased antibacerial activity. No toxicity was found to all organs of mice. The study developed an efficient way to enhance the antibacterial activity of CS dressing loaded AgNPs at low toxicity, which has great potential in wound care application.

Thermal Decontamination Technologies for Microorganisms and Mycotoxins in Low-Moisture Foods.

The contamination risks of microorganisms and mycotoxins in low-moisture foods have heightened public concern. Developing novel decontamination technologies to improve the safety of low-moisture foods is of great interest in both economics and public health. This review summarizes the working principles and applications of novel thermal decontamination technologies such as superheated steam, infrared, microwave, and radio-frequency heating as well as extrusion cooking. These methods of decontamination can effectively reduce the microbial load on products andmoderately destruct the mycotoxins. Meanwhile, several integrated technologies have been developed that take advantage of synergistic effects to achieve the maximum destruction of contaminants and minimize the deterioration of products.

Ultrasonication and thermosonication blanching treatments of carrot at varying frequencies: Effects on peroxidase inactivation mechanisms and quality characterization evaluation.

The effects of ultrasonication (US) and thermosonication (TS) blanching at varying frequencies on the carrot peroxidase (POD) inactivation and potential mechanisms were studied. The physicochemical properties were evaluated. Hot water (HW) blanching was used as control. Thermosonication decreased the POD activity to a greater extent, with a dual-frequency of 22/40 kHz showing the most significant effect. The POD-related gene expression was down-regulated by TS, which was contrary to the thermally treated samples. Electron paramagnetic resonance (EPR) spectra revealed that ultrasound-induced radicals from water sonolysis might involve in the POD inactivation. Thermosonication substantially increased the total carotenoid content (TCC). The color analysis showed that thermosonicated samples with a dual-frequency (22/40 kHz) exhibited the maximum values of C* and ΔE, and the minimum value of the whiteness index (WI). The micrographs verified the alterations in TCC and relative electrolyte leakage (REL) of carrot treated by HW, US, and TS.