Optimization of emulsification conditions with rice bran concentrates for the preliminary formulation of potential vegan dressings and their characterization.

A fraction of rice bran (RB), generated during the brown rice polishing, is utilized to extract oil, resulting in defatted RB (DRB). The aim of this study was to optimize the emulsification conditions to enhance the value of this byproduct by formulating potential vegan dressings and characterizing them. Enzymatic hydrolysis of the starch present in DRB yields the DRB concentrate (DRBC). A central composite design was applied and the results were analyzed using response surface methodology to select optimal conditions for an oil-in-water emulsion formula. Two formulations were chosen: one corresponds to the optimal conditions, with 26.5% of oil and 73.5% of DRBC dispersion (eoptimal), and the other one with 21.7% of oil and 78.3% of dispersion (eED8). The eoptimal formulation exhibited significantly lower mean De Brouckere diameter (D4,3) value and higher viscosity when compared with eED8. For both emulsions, the particle size distribution and D4,3 remained unchanged during storage, whereas viscosity decreased, and backscattering (BS) increased. Initially, both emulsions exhibited solid viscoelastic behavior, which was partially lost during quiescent storage. The increase in BS was attributed to particle disaggregation, ultimately leading to the aforementioned change in rheological behavior. In conclusion, although the designed emulsions underwent microstructural changes, they were stable against gravitational separation. To improve stability during quiescent storage, it is suggested to incorporate a thickening agent. Hence, it is propose to procced with the development of a vegan dressing based on the eoptimal emulsion, as it exhibits superior physicochemical properties.

Characterization of Melanoidins and Color Development in Dulce de Leche, a Confectionary Dairy Product With High Sucrose Content: Evaluation of pH Effect, an Essential Manufacturing Process Parameter.

The effect on color of the initial pH employed in dulce de leche (DL) production was evaluated through physicochemical and spectroscopical characterization of the melanoidins formed in the process. Melanoidins originated at pH values of 6.5, 7.0, and 7.5, and they were released by the enzymatic hydrolysis of the protein backbone and purified by gel filtration. They showed a significant degree of polydispersity, in general, with molecular weights (MWs) below 1,800 Da. DL produced at a higher pH released melanoidins with higher average MW after the enzymatic hydrolysis. They also presented darker colors (dE*ab, C*), more closely resembling those typical of the commercial product. Analysis of the fractions isolated by gel filtration using HPLC-DAD and multinuclear NMR showed an heterogeneous and complex composition. Even though structurally related, the 1H NMR spectra of melanoidins showed a higher degree of aromaticity at higher pH values. In conclusion, the pH employed in DL production affects the amount and structure of the colored products originated by MR reactions, and thus the color of the final product.

Interactions and Dissociation Constants of Galactomannan Rendered Cellulose Films with Concavalin A by SPR Spectroscopy.

Interactions of biomolecules at interfaces are important for a variety of physiological processes. Among these, interactions of lectins with monosaccharides have been investigated extensively in the past, while polysaccharide-lectin interactions have scarcely been investigated. Here, we explore the adsorption of galactomannans (GM) extracted from Prosopis affinis on cellulose thin films determined by a combination of multi-parameter surface plasmon resonance spectroscopy (MP-SPR) and atomic force microscopy (AFM). The galactomannan adsorbs spontaneously on the cellulose surfaces forming monolayer type coverage (0.60 ± 0.20 mg·m-2). The interaction of a lectin, Concavalin A (ConA), with these GM rendered cellulose surfaces using MP-SPR has been investigated and the dissociation constant KD (2.1 ± 0.8 × 10-8 M) was determined in a range from 3.4 to 27.3 nM. The experiments revealed that the galactose side chains as well as the mannose reducing end of the GM are weakly interacting with the active sites of the lectins, whereas these interactions are potentially amplified by hydrophobic effects between the non-ionic GM and the lectins, thereby leading to an irreversible adsorption.

Emulsifying properties of defatted rice bran concentrates enriched in fiber and proteins.

BACKGROUND: Rice bran (RB), a by-product of the rice milling industry, constitutes around 10% of the total weight of rough rice. The interest in the use of RB is centered on its nutritional quality, its low cost, and its extensive worldwide production. As RB is commonly used for oil extraction, the defatted rice bran (DRB) is obtained as a second by-product. The aim of this work was to obtain a defatted rice bran concentrate (DRBC), enriched in protein and fiber, from defatted rice bran flour (DRBF) and to determine its physicochemical and emulsifying properties. RESULTS: To obtain the DRBC, the starch was efficiently hydrolyzed (> 98%) with α-amylase and amyloglucosidase, with a concomitant increase in the proportions of crude protein (from 154.7 to 274.3 g kg-1 ) and total dietary fiber (from 276.1 to 492.3 g kg-1 ). Defatted rice bran concentrate exhibited a loss of protein solubility and increased surface hydrophobicity compared with DRBF. Defatted rice-bran concentrate dispersions with and without previous ultrasound treatment were prepared. The sonication led to an increase in the apparent viscosity. Emulsions were prepared with dispersions with and without previous ultrasound treatment and showed high stability in quiescent conditions over 28 days. However, the emulsions prepared with dispersions treated with ultrasound resulted in lower D4,3 values and higher elastic and viscous moduli. CONCLUSION: The rice bran concentrate can be used to obtain stable oil-in-water (O/W) emulsions, including both soluble and insoluble fractions, in acidic and neutral conditions. These innovative findings thus contribute to increasing the added value of this important by-product of the rice-milling industry. © 2019 Society of Chemical Industry.

Isolation and Characterization of Melanoidins from Dulce de Leche, A Confectionary Dairy Product.

Melanoidins, the brown-colored compounds formed through the Maillard reaction, are responsible for color development in dulce de leche (DL), a popular confectionary dairy product in the Río de la Plata region, particularly in Uruguay and Argentina. Color is a critical quality parameter that strongly influences consumer preference. This work aimed to develop a method to perform preliminary structural characterization of the chromophores produced by the Maillard reaction. Melanoidins are present in a water-insoluble fraction, linked to a protein backbone, conforming melanoproteins of high molecular weight. The insoluble melanoprotein fraction (10% total solids) was isolated, and the chromophores released by proteolysis and isolated by gel-permeation chromatography. The analysis of the products revealed that they present a high degree of molecular weight (MW) polydispersity, in a range of 300 to 2000 Da, where the compounds of higher molecular weight contributed the most to the color of the product. The isolated fractions were further analyzed by RP-HPLC using a diode array detector (DAD) detector. These results, together with H-NMR data, suggested that the chromophores isolated belonged to a relatively simple mixture of aromatic products with higher hydrophobic character relative to other products of the melanoprotein digestion.

Adsorption of chia proteins at interfaces: Kinetics of foam and emulsion formation and destabilization.

Chia proteins were extracted by solubilisation at pH 10 or 12 and precipitated at pH 4.5. Isolates were named as CPI10 and CPI12, according to their extraction pH, 10 or 12, respectively. The surface properties of both isolates were studied at neutral conditions. Foams were formed by air bubbling and both the formation and destabilization processes were analysed by conductimetry. The extraction pH significantly affected the interfacial properties of chia proteins. The higher surface hydrophobicity in CPI10 led to more flexible proteins with improved foaming properties. Foams formed by CPI10 were more stable than those by CPI12 due to the formation of a thicker interfacial film, which meant a greater ability to retard liquid drainage. Freshly-made coarse emulsions stabilized with CPI12 showed a lower mean droplet size and a significantly lower degree of overall destabilization than those stabilized with CPI10. None of the two emulsions showed flocculating effect.

Antibody Profile of Colostrum and the Effect of Processing in Human Milk Banks: Implications in Immunoregulatory Properties.

BACKGROUND: When feeding preterm infants, donor milk is preferred if the mother's own milk is unavailable. Pasteurization may have detrimental effects on bioactivity, but more information is needed about its effects on the immunological compounds. Research aim: This work has two main aims: evaluate the antibody profile of colostrum and study the quantitative variations in the antibodies' level and specific reactivity after undergoing Holder pasteurization. The authors focused on immunoregulatory components of colostrum (antidietary antibodies and TGF-ß2) in the neonatal gut. METHODS: This is a descriptive cross-sectional study of a convenience sample of 67 donated colostrum samples at different days after delivery, both raw and pasteurized. Antibody profiles were analyzed at different times during breastfeeding, and total and specific antibodies (IgM, IgA, and IgG subclasses) were compared with tetanus toxoid and ovalbumin using enzyme-linked immunosorbent assay. The processing effect on total and specific antibodies, as well as TGF-ß2, was evaluated by paired analyses. RESULTS: No variations in immunological compounds were observed throughout the colostrum stage. The TGF-ß2, antibodies' concentrations, and antibodies' specific reactivity after pasteurization did not vary significantly as days of lactation varied. Changes in antibody levels were dependent on isotype and IgG subclass, and IgG4 showed remarkable resistance to heating. Moreover, the effect of the pasteurization on specific reactivity was antigen dependent. CONCLUSION: The supply of relevant immunological components is stable throughout the colostrum stage. The effects of pasteurization on antibodies depend on isotype, subclass, and specificity. This information is relevant to improving the immunological quality of colostrum, especially for preterm newborns.

Whey protein concentration by ultrafiltration and study of functional properties / Concentração de proteínas de soro por ultrafiltração e estudo das propriedades funcionais

ABSTRACT: This paper aim to evaluate the ultrafiltration (UF) process for constituents recovery from whey. Sequences of factorial designs were performed by varying temperature (5 to 40°C) and pressure (1 to 3 bar), to maximize the proteins concentration using membrane of 100kDa in dead end system. Based on the best result new experiments were performed with membrane of 50kDa and 10kDa. With the membrane of 50 the protein retention was about 3 times higher than the membrane of 100kDa. The concentrated obtained by UF membrane of 10kDa, 10°C and 2 bar in laboratory scale showed a mean protein retention of 80 %, greater protein solubility, emulsion stability and the identification of β-lactoglobulins (18.3 kDa) and α-lactalbumin fractions (14.2kDa). Therefore, the use of membrane of 100 and 50kDa are became a industrially recommendable alternatives to concentration of whey proteins, and/or as a previous step to the fractionation of whey constituents using membrane ≤10kDa, aiming at future applications in different areas (food, pharmaceutical, chemical, etc.).

RESUMO: O objetivo do estudo foi avaliar o processo de Ultrafiltração (UF) na recuperação dos constituintes do soro de leite. Planejamentos fatoriais sequenciais foram realizados, variando a temperatura (5 a 40°C), a pressão (1 a 3 bar) e visando maximizar a concentração de proteínas usando membrana de 100kDa em sistema dead end. Baseados nos melhores resultados, foram realizados experimentos com de 50kDa e 10kDa. Em relação a membrana de 50kDa, a retenção de proteínas foi cerca de três vezes maior em relação a membrana de 100kDa. O concentrado obtido por membrana UF de 10kDa, 10°C e 2 bar, em escala laboratorial, mostrou uma retenção média de proteína de 80%, maior solubilidade protéica, estabilidade da emulsão e a identificação das frações β-lactoglobulins (18.3kDa) e α-lactalbumin (14.2kDa). Portanto, o uso de membranas de 100 e 50kDa são alternativas recomendáveis industrialmente à concentração de proteínas de soro de leite, e/ou como etapa anterior ao fracionamento de constituintes do soro usando membrana ≤10kDa, visando aplicações futuras em difentes áreas (alimentícia, farmacêutica, química, etc).

Effect of calcium salts and surfactant concentration on the stability of water-in-oil (w/o) emulsions prepared with polyglycerol polyricinoleate.

The objective of this work was to obtain water-in-oil (w/o) emulsions with polyglycerol polyricinoleate (PGPR) as emulsifier and to study the effect of the addition of calcium in the dispersed aqueous phase on the stability of these systems. Emulsions were formulated with 0.2, 0.5 and 1.0% w/w PGPR and 10% w/w water containing calcium chloride at varied concentrations or other salts (calcium lactate or carbonate; sodium, magnesium or potassium chloride). The stability of these systems was studied with a vertical scan analyzer during 15 days; coalescence and sedimentation were observed as simultaneous destabilization processes. The increase of PGPR concentration and/or calcium chloride content gave more stable emulsions. The stabilizing effect of calcium salt was attributed to the diminution of the water droplets size, the decrease of the attractive force between water droplets and the increase of the adsorption density of the emulsifier. The viscoelastic parameters of the interfacial film were decreased with increasing calcium and PGPR concentrations. Calcium chloride produced a higher increase of stability than calcium salts with lower dissociation degree. The presence of any assayed salt in the aqueous phase also allowed the stabilization of w/o emulsions with higher water contents.