Survival of different microbial strains in pure and diluted tattoo inks.

Several microorganisms can be found in tattoo inks injected into the skin, despite the ink matrix being considered inhospitable to microbial growth. Studies on the microbial quality of tattoo inks have reported the presence of microorganisms in most of the samples. This study aimed to assess the survival of environmental and human microbial species, selected on the specific criteria, in tattoo inks. Undiluted sterile black ink and serial dilutions (10-fold/100-fold) were each separately seeded with four bacterial strains (Staphylococcus aureus, Pseudomonas aeruginosa, Bacillus pumilus, Mycobacterium fortuitum), one yeast (Candida albicans), and one mould (Fusarium solani). Their survival was periodically tested using cultural methods. No tested microorganisms were able to survive in undiluted ink, except for B. pumilus that survived up to 3 weeks. All the tested species, except for S. aureus, showed survivability for up to 10 weeks in 100-fold diluted inks, and P. aeruginosa, M. fortuitum, and C. albicans were even able to grow. B. pumilus and F. solani had good rates of survival even at the smallest dilution. The ability of microorganisms to survive and grow in tattoo inks could have health implications if contaminated ink dilutions are used during tattooing practices and stored for a long time.

An outbreak of cryptosporidiosis associated with drinking water in north-eastern Italy, August 2019: microbiological and environmental investigations.

Cryptosporidium is a leading global cause of waterborne disease, with many reported outbreaks related to main water supplies. In August 2019, an outbreak of cryptosporidiosis involving 80 cases occurred among 114 vacationers in a small municipality located in the Tuscan-Emilian Apennines, north-eastern Italy. After excluding a potential food-borne outbreak, the epidemiological investigation focussed on the hypothesis of a waterborne outbreak. This was confirmed by the finding of Cryptosporidium oocysts in stools of the cases and in water samples from the municipal water network. Molecular characterisation revealed the zoonotic species Cryptosporidium parvum as the causative agent. A single subtype (IIdA25G1) was found among all cases, and in one of two positive water samples. The municipality's water supply used spring water that only received a disinfection treatment insufficient to inactivate the parasite. Possible entry means into the water mains were found through further environmental investigations. As these types of water supplies are particularly vulnerable to various environmental factors, a control system based on the risk assessment of each phase of the water supply chain is required to guarantee water safety. Effective methods for detection of protozoan pathogens, which are generally excluded from routine water supply analysis, should be applied.

An Italian survey on the microbiological safety of toys containing aqueous media.

AIMS: The purpose of the present investigation is to fill the current gap in information regarding the microbiological quality of toys containing aqueous media and the related risks for users. METHODS: Over 18 years, a total of 491 sealed toys containing aqueous media were analysed using conventional microbial culture methods. In addition, molecular methods (PCR/nested RT-PCR, followed by Sanger sequencing) were employed to test for enteric viruses (enteroviruses and adenoviruses) in a subset of toys; subsequently, the infectivity of the positive samples was tested on cell cultures. RESULTS: Of the examined toys, 23.8% were noncompliant with the limits of the European guideline. The most frequently exceeded limits were those for Aerobic bacteria (84.6%), and Pseudomonas aeruginosa (29.9%). Other opportunistic bacterial species that were frequently detected were Stenotrophomonas maltophilia, Pseudomonas fluorescens, Burkholderia cepacia, Sphingomonas paucimobilis and Comamonas acidovorans. In a subset of 28 samples, adenovirus (25%) and enterovirus (11%) genome was also found to be present, although the samples with viral positivity did not show infectivity after inoculation on appropriate cell monolayers. CONCLUSIONS: The results indicate a condition of microbial exposure related to the use of toys containing aqueous media. SIGNIFICANCE AND IMPACT OF STUDY: The investigation highlights the need for more stringent monitoring during the production, packaging and storage of toys containing aqueous matrices in order to safeguard children's health.

Hepatitis A Virus Strains Circulating in the Campania Region (2015-2018) Assessed through Bivalve Biomonitoring and Environmental Surveillance.

The genetic diversity of Hepatitis A Virus (HAV) circulating in the Campania Region in years 2015-2018 was investigated through the monitoring of sentinel bivalve shellfish and water matrices. Overall, 463 water samples (71 sewage samples, 353 coastal discharge waters, and 39 seawaters samples), and 746 bivalve shellfish samples were analyzed. Positivity for HAV was detected in 20/71 sewage samples, 14/353 coastal discharge waters, 5/39 seawaters, and 102/746 bivalve shellfish. Sixty-one of the positive samples were successfully sequenced and were characterized as genotype IA (n = 50) and IB (n = 11). The prevalent strain circulating in 2015 in both bivalves and waters was the IA strain responsible for the outbreak occurring around the same time in the Naples area. This variant was no longer identified in subsequent years (2017-2018) when, instead, appeared two of the IA variants of the multistate outbreak affecting men who have sex with men (MSM), VRD_521_2016, and RIVM-HAV16-090, with the former prevailing in both shellfish and water environments. HAV IB isolates were detected over the years in shellfish and in water matrices, but not in clinical samples, suggesting that this genotype had been circulating silently. An integrated surveillance system (environment/food/clinical cases) can be a useful tool to monitor changes in viral variants in the population, as well as an early warning system.

Airborne microorganisms associated with waste management and recovery: biomonitoring methodologies.

This paper presents preliminary results from a year-long indoor bioaerosol monitoring performed in three working environments of a municipal composting facility treating green and organic waste. Composting, whereby organic matter is stabilized through aerobic decomposition, requires aeration, causing the dispersion of microbial particles (microorganisms and associated toxins). Waste can, therefore, become a potential source of biological hazard. Bioaerosol samples were collected on a monthly basis. Through a comparison of results obtained using two samplers - the Surface Air System DUO SAS 360 and the BioSampler - the study aimed at assessing the presence of biological pollutants, and at contributing to the definition of standard sampling methods for bioaerosols leading, eventually, to the establishment of exposure limits for these occupational pollutants.

Microbial characterization of water and biofilms in drinking water distribution systems at sport facilities.

The present study investigated the in situ microbial indicators' occurrence in water and biofilm in drinking water distribution systems of sport facilities such as gyms. The presence of Legionella, such as a potential pathogen, was also verified. Water and biofilm were contemporaneously collected and microbiologically analyzed. Few colonies of coliforms were detected in biofilm but not in the corresponding water samples. Conversely, some colonies of heterotrophs were counted at 22 degrees C in both the 80% biofilm samples and the 53% water samples. Legionella was detected in 29% of the hot water systems, and, in particular, L. pneumophila in 21% and L. non pneumophila in 9% of the samples. Higher counts were found in biofilm samples. As it was recommended for swimming pools, it is to be hoped that hygiene risk assessment criteria and safety plans could be also developed for gyms to reduce potential hazards to health for all attendants.