Surface Crystal and Degradability of Shape Memory Scaffold Essentialize Osteochondral Regeneration.

The minimally invasive deployment of scaffolds is a key safety factor for the regeneration of cartilage and bone defects. Osteogenesis relies primarily on cell-matrix interactions, whereas chondrogenesis relies on cell-cell aggregation. Bone matrix expansion requires osteoconductive scaffold degradation. However, chondrogenic cell aggregation is promoted on the repellent scaffold surface, and minimal scaffold degradation supports the avascular nature of cartilage regeneration. Here, a material satisfying these requirements for osteochondral regeneration is developed by integrating osteoconductive hydroxyapatite (HAp) with a chondroconductive shape memory polymer (SMP). The shape memory function-derived fixity and recovery of the scaffold enabled minimally invasive deployment and expansion to fill irregular defects. The crystalline phases on the SMP surface inhibited cell aggregation by suppressing water penetration and subsequent protein adsorption. However, HAp conjugation SMP (H-SMP) enhanced surface roughness and consequent cell-matrix interactions by limiting cell aggregation using crystal peaks. After mouse subcutaneous implantation, hydrolytic H-SMP accelerated scaffold degradation compared to that by the minimal degradation observed for SMP alone for two months. H-SMP and SMP are found to promote osteogenesis and chondrogenesis, respectively, in vitro and in vivo, including the regeneration of rat osteochondral defects using the binary scaffold form, suggesting that this material is promising for osteochondral regeneration.

Electrical Control and Transport of Tightly Bound Interlayer Excitons in a MoSe_{2}/hBN/MoSe_{2} Heterostructure.

Controlling interlayer excitons in Van der Waals heterostructures holds promise for exploring Bose-Einstein condensates and developing novel optoelectronic applications, such as excitonic integrated circuits. Despite intensive studies, several key fundamental properties of interlayer excitons, such as their binding energies and interactions with charges, remain not well understood. Here we report the formation of momentum-direct interlayer excitons in a high-quality MoSe_{2}/hBN/MoSe_{2} heterostructure under an electric field, characterized by bright photoluminescence (PL) emission with high quantum yield and a narrow linewidth of less than 4 meV. These interlayer excitons show electrically tunable emission energy spanning ∼180 meV through the Stark effect, and exhibit a sizable binding energy of ∼81 meV in the intrinsic regime, along with trion binding energies of a few millielectronvolts. Remarkably, we demonstrate the long-range transport of interlayer excitons with a characteristic diffusion length exceeding 10 µm, which can be attributed, in part, to their dipolar repulsive interactions. Spatially and polarization-resolved spectroscopic studies reveal rich exciton physics in the system, such as valley polarization, local trapping, and the possible existence of dark interlayer excitons. The formation and transport of tightly bound interlayer excitons with narrow linewidth, coupled with the ability to electrically manipulate their properties, open exciting new avenues for exploring quantum many-body physics, including excitonic condensate and superfluidity, and for developing novel optoelectronic devices, such as exciton and photon routers.

Giant Terahertz Birefringence in an Ultrathin Anisotropic Semimetal.

Manipulating the polarization of light at the nanoscale is key to the development of next-generation optoelectronic devices. This is typically done via waveplates using optically anisotropic crystals, with thicknesses on the order of the wavelength. Here, using a novel ultrafast electron-beam-based technique sensitive to transient near fields at THz frequencies, we observe a giant anisotropy in the linear optical response in the semimetal WTe2 and demonstrate that one can tune the THz polarization using a 50 nm thick film, acting as a broadband wave plate with thickness 3 orders of magnitude smaller than the wavelength. The observed circular deflections of the electron beam are consistent with simulations tracking the trajectory of the electron beam in the near field of the THz pulse. This finding offers a promising approach to enable atomically thin THz polarization control using anisotropic semimetals and defines new approaches for characterizing THz near-field optical response at far-subwavelength length scales.

Two-Day Fraction Gamma Knife Radiosurgery for Large Brain Metastasis.

Objective: We investigated how treating large brain metastasis (LBM) using two-day fraction gamma knife radiosurgery (GKRS) affects tumor control and patient survival. A prescription dose of 10.3 Gy was applied for two consecutive days, with a biologically effective dose (BED) equivalent to a tumor single-fraction dose of 16.05 Gy and a brain single-fraction dose of 15.12 Gy. Methods: Between November 2017 and December 2021, 42 patients (mean age: 68.3 years, range: 50-84 years, male: 29 [69.1%], female: 13 [30.9%]) with 44 tumors underwent two-day fraction GKRS to treat large volume brain metastasis. The main cancer types were non-small cell lung cancer (NSCLC, N=16), small cell lung cancer (SCLC, N=7), colorectal cancer (N=7), breast cancer (N=3), gastric cancer (N=2), and other cancers (N=7). Twenty-one (50.0%) patients had a single LBM, nineteen (46.3%) had a single LBM and other metastasi(e)s, and two had two (4.7%) large brain metastases. At the time of the two-day fraction GKRS, the tumors had a mean volume of 23.1 cc (range: 12.5-67.4). on each day, radiation was administered at a dose of 10.3 Gy, mainly using a 50% isodose-line. Results: We obtained clinical and magnetic resonance imaging (MRI) follow-up data for 34 patients (81%) with 35 tumors, who had undergone two-day fraction GKRS. These patients did not experience acute or late radiation-induced complications during follow-up. The median and mean progression-free survival (PFS) periods were 188 and 194 days, respectively. The local control rates at 6, 9, and 12 months were 77%, 40%, and 34%, respectively. The prognostic factors related to PFS were prior radiotherapy (P = 0.019) and lung cancer origin (P = 0.041). Other factors such as tumor volumes, each isodose volumes, and peri-GKRS systemic treatment were not significantly related to PFS. The overall survival period of the 44 patients following repeat SRS ranged from 15-878 days (median: 263±38 days, mean: 174±43) after the two-day fraction GKRS. Eight patients (18.2%) were still alive. Conclusion: Considering the unsatisfactory tumor control, a higher prescription dose should be needed in this procedure as a salvage management. Moreover, in the treatment for LBM with fractionated SRS, using different isodoses and prescription doses at the treatment planning for LBMs should be important. However, this report might be a basic reference with the same fraction number and prescription dose in the treatment for LBMs with frame-based SRS.

Ultrabroadband Terahertz Near-Field Nanospectroscopy with a HgCdTe Detector.

While near-field infrared nanospectroscopy provides a powerful tool for nanoscale material characterization, broadband nanospectroscopy of elementary material excitations in the single-digit terahertz (THz) range remains relatively unexplored. Here, we study liquid-Helium-cooled photoconductive Hg1-XCdXTe (MCT) for use as a fast detector in near-field nanospectroscopy. Compared to the common T = 77 K operation, liquid-Helium cooling reduces the MCT detection threshold to ∼22 meV, improves the noise performance, and yields a response bandwidth exceeding 10 MHz. These improved detector properties have a profound impact on the near-field technique, enabling unprecedented broadband nanospectroscopy across a range of 5 to >50 THz (175 to >1750 cm-1, or <6 to 57 µm), i.e., covering what is commonly known as the "THz gap". Our approach has been implemented as a user program at the National Synchrotron Light Source II, Upton, USA, where we showcase ultrabroadband synchrotron nanospectroscopy of phonons in ZnSe (∼7.8 THz) and BaF2 (∼6.7 THz), as well as hyperbolic phonon polaritons in GeS (6-8 THz).

Room temperature valley polarization via spin selective charge transfer.

The two degenerate valleys in transition metal dichalcogenides can be used to store and process information for quantum information science and technology. A major challenge is maintaining valley polarization at room temperature where phonon-induced intervalley scattering is prominent. Here we demonstrate room temperature valley polarization in heterostructures of monolayer MoS2 and naphthylethylammine based one-dimensional chiral lead halide perovskite. By optically exciting the heterostructures with linearly polarized light close to resonance and measuring the helicity resolved photoluminescence, we obtain a degree of polarization of up to -7% and 8% in MoS2/right-handed (R-(+)-) and left-handed (S-(-)-) 1-(1-naphthyl)ethylammonium lead iodide perovskite, respectively. We attribute this to spin selective charge transfer from MoS2 to the chiral perovskites, where the perovskites act as a spin filter due to their chiral nature. Our study provides a simple, yet robust route to obtain room temperature valley polarization, paving the way for practical valleytronics devices.

Spin-mediated shear oscillators in a van der Waals antiferromagnet.

Understanding how microscopic spin configuration gives rise to exotic properties at the macroscopic length scale has long been pursued in magnetic materials1-5. One seminal example is the Einstein-de Haas effect in ferromagnets1,6,7, in which angular momentum of spins can be converted into mechanical rotation of an entire object. However, for antiferromagnets without net magnetic moment, how spin ordering couples to macroscopic movement remains elusive. Here we observed a seesaw-like rotation of reciprocal lattice peaks of an antiferromagnetic nanolayer film, whose gigahertz structural resonance exhibits more than an order-of-magnitude amplification after cooling below the Néel temperature. Using a suite of ultrafast diffraction and microscopy techniques, we directly visualize this spin-driven rotation in reciprocal space at the nanoscale. This motion corresponds to interlayer shear in real space, in which individual micro-patches of the film behave as coherent oscillators that are phase-locked and shear along the same in-plane axis. Using time-resolved optical polarimetry, we further show that the enhanced mechanical response strongly correlates with ultrafast demagnetization, which releases elastic energy stored in local strain gradients to drive the oscillators. Our work not only offers the first microscopic view of spin-mediated mechanical motion of an antiferromagnet but it also identifies a new route towards realizing high-frequency resonators8,9 up to the millimetre band, so the capability of controlling magnetic states on the ultrafast timescale10-13 can be readily transferred to engineering the mechanical properties of nanodevices.

Excitation-Dependent High-Lying Excitonic Exchange via Interlayer Energy Transfer from Lower-to-Higher Bandgap 2D Material.

High light absorption (∼15%) and strong photoluminescence (PL) emission in monolayer (1L) transition metal dichalcogenides (TMDs) make them ideal candidates for optoelectronic device applications. Competing interlayer charge transfer (CT) and energy transfer (ET) processes control the photocarrier relaxation pathways in TMD heterostructures (HSs). In TMDs, long-distance ET can survive up to several tens of nm, unlike the CT process. Our experiment shows that an efficient ET occurs from the 1Ls WSe2-to-MoS2 with an interlayer hexagonal boron nitride (hBN), due to the resonant overlapping of the high-lying excitonic states between the two TMDs, resulting in enhanced HS MoS2 PL emission. This type of unconventional ET from the lower-to-higher optical bandgap material is not typical in the TMD HSs. With increasing temperature, the ET process becomes weaker due to the increased electron-phonon scattering, destroying the enhanced MoS2 emission. Our work provides new insight into the long-distance ET process and its effect on the photocarrier relaxation pathways.

Body-Shaping Membrane to Regenerate Breast Fat by Elastic Structural Holding.

Tissue regeneration requires structural holding and movement support using tissue-type-specific aids such as bone casts, skin bandages, and joint protectors. Currently, an unmet need exists in aiding breast fat regeneration as the breast moves following continuous body motion by exposing the breast fat to dynamic stresses. Here, the concept of elastic structural holding is applied to develop a shape-fitting moldable membrane for breast fat regeneration ("adipoconductive") after surgical defects are made. The membrane has the following key characteristics: (a) It contains a panel of honeycomb structures, thereby efficiently handling motion stress through the entire membrane; (b) a strut is added into each honeycomb in a direction perpendicular to gravity, thereby suppressing the deformation and stress concentration upon lying and standing; and (c) thermo-responsive moldable elastomers are used to support structural holding by suppressing large deviations of movement that occur sporadically. The elastomer became moldable upon a temperature shift above Tm. The structure can then be fixed as the temperature decreases. As a result, the membrane promotes adipogenesis by activating mechanotransduction in a fat miniature model with pre-adipocyte spheroids under continuous shaking in vitro and in a subcutaneous implant placed on the motion-prone back areas of rodents in vivo.

Simultaneous Chemical Mapping of Live Biofilm Microenvironmental pH and Hydrogen Peroxide in Real Time with a Triple Scanning Electrochemical Microscopy Tip.

Dental plaque biofilm is a complex ecosystem. The distribution of microbial species in the biofilm is heavily influenced by local chemical interactions that result from diverse metabolic activities and the nature of the released molecules. As a relevant example, H2O2-producing bacteria can antagonize disease-associated bacteria, leading to the maintenance of a healthy oral microbiome. Herein, we report the development of a triple-sensor (redox, pH, and H2O2) scanning electrochemical microscopy (SECM) tip capable of simultaneously mapping the pH and H2O2 concentration produced by a dental plaque-derived multispecies biofilm grown on hydroxyapatite. The pH sensor of the triple SECM tip showed a near Nernstian slope of -71.1 ± 2 mV/pH (N = 3), whereas the H2O2 sensor showed a slope of -0.052 ± 0.002 nA/µM H2O2 at pH 7.2 and a detection limit of 1.0 ± 0.2 µM (N = 7). There is no significant difference in the sensitivities of H2O2 sensors at pH 6.2, 7.2, and 8.2 at 95% CI (N = 7). The pH and H2O2 sensors demonstrated excellent reversibility with response times of 3 and 5 s, respectively, along with reliable stability over 4 h at 37 °C. The sensors did not show any cross talk between pH and H2O2 concentration ([H2O2]) measurements, highlighting the accuracy and versatility of the SECM tip. Simultaneous chemical imaging of pH and [H2O2] across the biofilm revealed a clustered distribution of local H2O2 concentrations, ranging from 0 to 17 µM. Conversely, the local pH remained constant at 7.2. The relation of local chemical profiles and the distribution of bacterial species within the oral microbiome was experimentally investigated in the context of bacterial H2O2 antagonism. The benefit of clustered H2O2 production was that the total area of H2O2 produced by smaller clusters was 67% more than that of a single cluster with the same starting number of bacteria. Thus, this triple SECM tip can potentially be used to study local molecular mechanisms that result in dysbiosis of the oral microbiome.

O2 variant chip to simulate site-specific skeletogenesis from hypoxic bone marrow.

The stemness of bone marrow mesenchymal stem cells (BMSCs) is maintained by hypoxia. The oxygen level increases from vessel-free cartilage to hypoxic bone marrow and, furthermore, to vascularized bone, which might direct the chondrogenesis to osteogenesis and regenerate the skeletal system. Hence, oxygen was diffused from relatively low to high levels throughout a three-dimensional chip. When we cultured BMSCs in the chip and implanted them into the rabbit defect models of low-oxygen cartilage and high-oxygen calvaria bone, (i) the low oxygen level (base) promoted stemness and chondrogenesis of BMSCs with robust antioxidative potential; (ii) the middle level (two times ≥ low) pushed BMSCs to quiescence; and (iii) the high level (four times ≥ low) promoted osteogenesis by disturbing the redox balance and stemness. Last, endochondral or intramembranous osteogenesis upon transition from low to high oxygen in vivo suggests a developmental mechanism-driven solution to promote chondrogenesis to osteogenesis in the skeletal system by regulating the oxygen environment.

Using Virtual Reality in E-Cigarette and Secondhand Aerosol Prevention Messages: Implications for Emotional Campaign Design.

Vaping has dramatically increased in recent years among young adults. To increase risk perceptions and promote preventive behaviors against vaping and secondhand e-cigarette aerosol (SHA), this study designed and tested virtual reality (VR) messages based on the theory of psychological distance. We randomly assigned 137 participants to see one of three messages: a VR message presenting SHAs impact on the self (VR-Self), a VR message showing SHAs impact on others (VR-Other), and a print advertisement. Risk perceptions and preventive intentions/behaviors were assessed at three different times: before, immediately after, and 1 week after the experimental treatment. All three messages increased desired intentions and risk perceptions immediately, reduced vaping interest both immediately and 1 week after message exposure, and increased behavior to persuade others to quit vaping after a week. Compared with the print advertisement, VR-Other generated less vaping interest immediately following message exposure (ß = 1.40, p = 0.05). After 1 week, VR-Self (ß = 1.62, p = 0.05) and VR-Other (ß = 2.37, p = 0.01) generated less vaping interest than the print advertisement. VR-Other also generated a higher level of perceived harm of SHA (ß = 1.27, p = 0.01) than the print advertisement. VRs advantage over print in reducing vaping interest was increased after 1 week. Although VR-Other generated less emotions, such as fear, than VR-Self (z = 2.48, p = 0.02) and print (z = -2.82, p = 0.02), its persuasiveness was not hindered. Disgust increased the intentions to persuade others to quit vaping immediately after the experimental treatment (ß = 0.85, p = 0.02), and anger aroused by recalling the messages decreased vaping interest 1 week later (ß = -2.07, p = 0.02).

Light-Driven Ultrafast Polarization Manipulation in a Relaxor Ferroelectric.

Relaxor ferroelectrics have been intensely studied for decades based on their unique electromechanical responses which arise from local structural heterogeneity involving polar nanoregions or domains. Here, we report first studies of the ultrafast dynamics and reconfigurability of the polarization in freestanding films of the prototypical relaxor 0.68PbMg1/3Nb2/3O3-0.32PbTiO3 (PMN-0.32PT) by probing its atomic-scale response via femtosecond-resolution, electron-scattering approaches. By combining these structural measurements with dynamic phase-field simulations, we show that femtosecond light pulses drive a change in both the magnitude and direction of the polarization vector within polar nanodomains on few-picosecond time scales. This study defines new opportunities for dynamic reconfigurable control of the polarization in nanoscale relaxor ferroelectrics.

Large Exchange Coupling Between Localized Spins and Topological Bands in MnBi2 Te4.

Magnetism in topological materials creates phases exhibiting quantized transport phenomena with potential technological applications. The emergence of such phases relies on strong interaction between localized spins and the topological bands, and the consequent formation of an exchange gap. However, this remains experimentally unquantified in intrinsic magnetic topological materials. Here, this interaction is quantified in MnBi2 Te4 , a topological insulator with intrinsic antiferromagnetism. This is achieved by optically exciting Bi-Te p states comprising the bulk topological bands and interrogating the consequent Mn 3d spin dynamics, using a multimodal ultrafast approach. Ultrafast electron scattering and magneto-optic measurements show that the p states demagnetize via electron-phonon scattering at picosecond timescales. Despite being energetically decoupled from the optical excitation, the Mn 3d spins, probed by resonant X-ray scattering, are observed to disorder concurrently with the p spins. Together with atomistic simulations, this reveals that the exchange coupling between localized spins and the topological bands is at least 100 times larger than the superexchange interaction, implying an optimal exchange gap of at least 25 meV in the surface states. By quantifying this exchange coupling, this study validates the materials-by-design strategy of utilizing localized magnetic order to manipulate topological phases, spanning static to ultrafast timescales.

Clusterin Binding Modulates the Aggregation and Neurotoxicity of Amyloid-ß(1-42).

Alzheimer's disease (AD) is the most common neurodegenerative disorder characterized by the accumulation of amyloid-ß (Aß) aggregates in the brain. Clusterin (CLU), also known as apolipoprotein J, is a potent risk factor associated with AD pathogenesis, in which Aß aggregation is essentially involved. We observed close colocalization of CLU and Aß(1-42) (Aß42) in parenchymal amyloid plaques or vascular amyloid deposits in the brains of human amyloid precursor protein (hAPP)-transgenic Tg2576 mice. Therefore, to elucidate the binding interaction between CLU and Aß42 and its impact on amyloid aggregation and toxicity, the two synthetic proteins were incubated together under physiological conditions, and their structural and morphological variations were investigated using biochemical, biophysical, and microscopic analyses. Synthetic CLU spontaneously bound to different possible variants of Aß42 aggregates with very high affinity (Kd = 2.647 nM) in vitro to form solid CLU-Aß42 complexes. This CLU binding prevented further aggregation of Aß42 into larger oligomers or fibrils, enriching the population of smaller Aß42 oligomers and protofibrils and monomers. CLU either alleviated or augmented Aß42-induced cytotoxicity and apoptosis in the neuroblastoma-derived SH-SY5Y and N2a cells, depending on the incubation period and the molar ratio of CLU:Aß42 involved in the reaction before addition to the cells. Thus, the effects of CLU on Aß42-induced cytotoxicity were likely determined by the extent to which it bound and sequestered toxic Aß42 oligomers or protofibrils. These findings suggest that CLU could influence amyloid neurotoxicity and pathogenesis by modulating Aß aggregation.

Mechanisms of Interface Cleaning in Heterostructures Made from Polymer-Contaminated Graphene.

Heterostructures obtained from layered assembly of 2D materials such as graphene and hexagonal boron nitride have potential in the development of new electronic devices. Whereas various materials techniques can now produce macroscopic scale graphene, the construction of similar size heterostructures with atomically clean interfaces is still unrealized. A primary barrier has been the inability to remove polymeric residues from the interfaces that arise between layers when fabricating heterostructures. Here, the interface cleaning problem of polymer-contaminated heterostructures is experimentally studied from an energy viewpoint. With this approach, it is established that the interface cleaning mechanism involves a combination of thermally activated polymer residue mobilization and their mechanical actuation. This framework allows a systematic approach for fabricating record large-area clean heterostructures from polymer-contaminated graphene. These heterostructures provide state-of-the-art electronic performance. This study opens new strategies for the scalable production of layered materials heterostructures.

Sprayable nanomicelle hydrogels and inflammatory bowel disease patient cell chips for development of intestinal lesion-specific therapy.

All-in-one treatments represent a paradigm shift in future medicine. For example, inflammatory bowel disease (IBD) is mainly diagnosed by endoscopy, which could be applied for not only on-site monitoring but also the intestinal lesion-targeted spray of injectable hydrogels. Furthermore, molecular conjugation to the hydrogels would program both lesion-specific adhesion and drug-free therapy. This study validated this concept of all-in-one treatment by first utilizing a well-known injectable hydrogel that underwent efficient solution-to-gel transition and nanomicelle formation as a translatable component. These properties enabled spraying of the hydrogel onto the intestinal walls during endoscopy. Next, peptide conjugation to the hydrogel guided endoscopic monitoring of IBD progress upon adhesive gelation with subsequent moisturization of inflammatory lesions, specifically by nanomicelles. The peptide was designed to mimic the major component that mediates intestinal interaction with Bacillus subtilis flagellin during IBD initiation. Hence, the peptide-guided efficient adhesion of the hydrogel nanomicelles onto Toll-like receptor 5 (TLR5) as the main target of flagellin binding and Notch-1. The peptide binding potently suppressed inflammatory signaling without drug loading, where TLR5 and Notch-1 operated collaboratively through downstream actions of tumor necrosis factor-alpha. The results were produced using a human colorectal cell line, clinical IBD patient cells, gut-on-a-chip, a mouse IBD model, and pig experiments to validate the translational utility.

Role of Equilibrium Fluctuations in Light-Induced Order.

Engineering novel states of matter with light is at the forefront of materials research. An intensely studied direction is to realize broken-symmetry phases that are "hidden" under equilibrium conditions but can be unleashed by an ultrashort laser pulse. Despite a plethora of experimental discoveries, the nature of these orders and how they transiently appear remain unclear. To this end, we investigate a nonequilibrium charge density wave (CDW) in rare-earth tritellurides, which is suppressed in equilibrium but emerges after photoexcitation. Using a pump-pump-probe protocol implemented in ultrafast electron diffraction, we demonstrate that the light-induced CDW consists solely of order parameter fluctuations, which bear striking similarities to critical fluctuations in equilibrium despite differences in the length scale. By calculating the dynamics of CDW fluctuations in a nonperturbative model, we further show that the strength of the light-induced order is governed by the amplitude of equilibrium fluctuations. These findings highlight photoinduced fluctuations as an important ingredient for the emergence of transient orders out of equilibrium. Our results further suggest that materials with strong fluctuations in equilibrium are promising platforms to host hidden orders after laser excitation.

Anodic Stripping Voltammetry on a Carbon-based Ion-Selective Electrode.

In this study, we demonstrated the unique capability of carbon-based ion-selective electrode (ISE) to perform highly sensitive square wave anodic stripping voltammetry, while maintaining all the properties of an ISE, in terms of sensitivity, detection limit, response time and selectivity. Square wave anodic stripping voltammetry involves deposition and dissolution steps of metal ions, which means adsorption and desorption of metal ions on the conductive ion-selective membrane without losing its ion-sensing property. To demonstrate this capability, we chose a Ca2+ ion-selective microelectrode (µISE) as a potentiometric method and Cu2+-stripping voltammetry as an amperometric method. The carbon-based ISE surface is capable of quantifying nanomolar to micromolar Cu2+ in both a standard acetate buffer and a complex water sample. The Ca2+-µISE also showed a Nernstian slope of 29 mV / log [Ca2+] and a detection limit of 1 µM within the linear range of 1 µM to 10 mM. It thus opens an opportunity to use the low detection limit of anodic stripping voltammetry and the high selectivity of ISE-based potentiometry.