RESUMO
SrAs_{3} is a unique nodal-line semimetal that contains only a single nodal ring in the Brillouin zone, uninterrupted by any trivial bands near the Fermi energy. We performed axis-resolved optical reflection measurements on SrAs_{3} and observed that the optical conductivity exhibits flat absorption up to 129 meV in both the radial and axial directions, confirming the robustness of the universal power-law behavior of the nodal ring. The axis-resolved optical conductivity, in combination with theoretical calculations, further reveals fundamental properties beyond the flat absorption, including the overlap energy of the topological bands, the spin-orbit coupling gap along the nodal ring, and the geometric properties of the nodal ring such as the average ring radius, ring ellipticity, and velocity anisotropy. In addition, our temperature-dependent measurements revealed a spectral weight transfer between intraband and interband transitions, indicating a possible violation of the optical sum rule within the measured energy range.
RESUMO
ConspectusThermoelectric (TE) materials have received much attention because of their ability to convert heat energy to electrical energy. At a given temperature T, the efficiency of a TE material for this energy conversion is measured by the figure of merit zT, which is related to the thermopower (or Seebeck coefficient) S, the thermal conductivity κ, and the electrical conductivity σ of the TE material as zT = (S2σT)/κ. Bi2Q3 and PbQ (Q = Se, Te) are efficient TE materials with high zT, although they are not ecofriendly and their stability is poor at high temperature. In principle, a TE material can have a high zT if it has a low thermal conductivity and a high electrical conductivity, but the latter condition is hardly met in a real material because the parameters S, σ and κ have a conflicting dependence on material properties. The difficulty in searching for TE materials of high zT is even more exasperated because the relationship between the thermopower S and the carrier density n (hereafter, the S-vs-n relationship) for the well-known hole-doped samples of BiCuSeO showed that the hole carriers responsible for their thermopower are associated largely with the electronic states lying within â¼0.5 eV of its valence band maximum (VBM). Thus, the states governing the TE properties lie in the "skin-deep" region from the VBM. For electron-doped TE systems, the electron carriers responsible for their thermopower should also be associated with the electronic states lying within â¼0.5 eV of the conduction band minimum (CBM). This makes it difficult to predict TE materials of high zT. One faces a similar skin-deep phenomenon in searching for superconductors of high transition temperature because the transition from a normal metallic to a superconducting state involves the normal metallic states in the vicinity of the Fermi level EF. Other skin-deep phenomena in metallic compounds include the formation of charge density wave (CDW), which involves the electronic states in the vicinity of their Fermi levels. For magnetic materials of transition-metal ions, the preferred orientation of their spin moments is a skin-deep phenomenon because it is governed by the interaction between the highest-occupied and the lowest unoccupied d-states of these ions. In the present work we probe the issues concerning how to find the possible range of thermopower expected for a given TE material and hence how to recognize what experimental values of thermopower are expected or unusual. For these purposes, we analyze the accumulated S and n data on the three well-studied TE materials, Bi2Q3, PbQ, and BiCuQO (Q = Se, Te), as representative examples, in terms of the ideal theoretical S-vs-n relationships, which we determine for their defect-free Bi2Q3, PbQ, and BiCuQO structures using density functional theory (DFT) calculations under the rigid band approximation. We find that the general trends in the experimental S-vs-n relationships are reasonably well explained by the calculated S-vs-n relationships, and the carrier densities covering these relationships are associated with the states lying within â¼0.5 eV from their band edges confirming the skin-deep nature of their thermoelectric properties. Despite the fact that these TE materials are not one-dimensional (1D) in structure, they mostly possess sharp density-of-state peaks around their band edges because their band dispersions have a hidden 1D character so their thermopower is generally high in magnitude.
RESUMO
Density functional theory calculations were carried out to probe the nature of the electronic structure change in TiPO4 before and after its spin-Peierls distortion at 74.5 K, which is characterized by the dimerization in the chains of Ti3+ (d1) ions present in TiPO4. These calculations suggest strongly that the electronic state of TiPO4 is magnetic insulating before the distortion, but becomes nonmagnetic insulating after the distortion. Consistent with this suggestion, the phonon dispersion relations calculated for TiPO4 show that the undistorted TiPO4 is stable, while the distorted TiPO4 is not, if each Ti3+ ion has a spin moment, and that the opposite is true if each Ti3+ ion has no spin moment. These observations suggest that the driving force for the spin-Peierls distortion is the formation of direct metal-metal bonds leading to the dimerized chains of Ti3+ ions. The abrupt change in the electronic structures from a magnetic insulating state to a nonmagnetic insulating state explains why the spin-Peierls distortion of TiPO4 exhibits a first-order character. Although the two electronic states of TiPO4 before and after the distortion have a band gap, the substantial spin-Peierls distortion is found to enhance the thermoelectric properties of TiPO4.
RESUMO
Discovery of two dimensional (2D) magnets, showing intrinsic ferromagnetic (FM) or antiferromagnetic (AFM) orders, has accelerated development of novel 2D spintronics, in which all the key components are made of van der Waals (vdW) materials and their heterostructures. High-performing and energy-efficient spin functionalities have been proposed, often relying on current-driven manipulation and detection of the spin states. In this regard, metallic vdW magnets are expected to have several advantages over the widely-studied insulating counterparts, but have not been much explored due to the lack of suitable materials. Here, we report tunable itinerant ferro- and antiferromagnetism in Co-doped Fe4GeTe2 utilizing the vdW interlayer coupling, extremely sensitive to the material composition. This leads to high TN antiferromagnetism of TN ~ 226 K in a bulk and ~210 K in 8 nm-thick nanoflakes, together with tunable magnetic anisotropy. The resulting spin configurations and orientations are sensitively controlled by doping, magnetic field, and thickness, which are effectively read out by electrical conduction. These findings manifest strong merits of metallic vdW magnets as an active component of vdW spintronic applications.
RESUMO
Properties of solid-state materials depend on their crystal structures. In solid solution high entropy alloy (HEA), its mechanical properties such as strength and ductility depend on its phase. Therefore, the crystal structure prediction should be preceded to find new functional materials. Recently, the machine learning-based approach has been successfully applied to the prediction of structural phases. However, since about 80% of the data set is used as a training set in machine learning, it is well known that it requires vast cost for preparing a dataset of multi-element alloy as training. In this work, we develop an efficient approach to predicting the multi-element alloys' structural phases without preparing a large scale of the training dataset. We demonstrate that our method trained from binary alloy dataset can be applied to the multi-element alloys' crystal structure prediction by designing a transformation module from raw features to expandable form. Surprisingly, without involving the multi-element alloys in the training process, we obtain an accuracy, 80.56% for the phase of the multi-element alloy and 84.20% accuracy for the phase of HEA. It is comparable with the previous machine learning results. Besides, our approach saves at least three orders of magnitude computational cost for HEA by employing expandable features. We suggest that this accelerated approach can be applied to predicting various structural properties of multi-elements alloys that do not exist in the current structural database.
RESUMO
The magnetic structure and the origin of band gap opening for Ba2CuOsO6 were investigated by exploring the spin exchange interactions and employing the spin-orbit coupling effect. It revealed that the double-perovskite Ba2CuOsO6, composed of the 3d (Cu2+) and 5d (Os6+) transition metal magnetic ions is magnetic insulator. The magnetic susceptibilities of Ba2CuOsO6 obey the Curie-Weiss law, with an estimated Weiss temperature of -13.3 K, indicating AFM ordering. From the density functional theory approach, it is demonstrated that the spin exchange interaction between Cu ions plays a major role in exhibiting an antiferromagnetic behavior in the Ba2CuOsO6 system. An important factor to understand regarding the insulating behavior on Ba2CuOsO6 is the structural distortion shape of OsO6 octahedron, which should be closely connected with the ionic size of the A-site ion. Since the d-block of Os6+ (d2) ions of Ba2CuOsO6 is split into four states (xy < xz, yz < x2-y2 < z2), the crucial key is separation of doubly degenerated xz and yz levels to describe the magnetic insulating states of Ba2CuOsO6. By orbital symmetry breaking, caused by the spin-orbit coupling, the t2g level of Os6+ (d2) ions is separated into three sublevels. Two electrons of Os6+ (d2) ions occupy two levels of the three spin-orbit-coupled levels. Since Ba2CuOsO6 is a strongly correlated system, and the Os atom belongs to the heavy element group, one speculates that it is necessary to take into account both electron correlation and the spin-orbit coupling effect in describing the magnetic insulating states of Ba2CuOsO6.