Synthesis of silver nanoparticles colloids in imidazolium halide ionic liquids and their antibacterial activities for gram-positive and gram-negative bacteria.

Four 1-butyl-3-methylimidazolium halide ionic liquids were synthesized via metathesis and anion exchange reactions. Silver nanoparticles (AgNPs) colloids were synthesized in four ionic liquids in the pressurized reactor by reduction of silver nitrate with hydrogen gas, without adding solvents or stabilizing agents. Antibacterial activities of base ionic liquids and AgNPs colloids in ionic liquids were reviewed by well-diffusion method for gram-positive Bacillus cereus (NCIM-2155) and gram-negative Escherichia coli (NCIM-2931) bacteria. Antibacterial activities of ionic liquids and AgNPs colloids in ionic liquids were observed to be controlled by ionic liquids anions and AgNPs particle size. The 1-butyl-3-methylimidazolium iodide ionic liquid exhibited higher antibacterial activities among the studied ionic liquids. Further, the presence of AgNPs in 1-butyl-3-methylimidazolium iodide, ionic liquid enhanced its antibacterial activity for Bacillus cereus and Escherichia coli bacteria.

Fluorescent Carbon-Dots Thin Film for Fungal Detection and Bio-labeling Applications.

The fluorescence properties of CDs, such as high quantum yield, tunability of emission color, and so on, make a strong potential material in various fields. These applications are mainly derived from in situ formation of surface functional groups, high chemical stability, biocompatibility, and easy interaction with substrates, etc. Mostly, the research applications of CDs concentrate on the labeling of biological species, drug delivery, and sensing in consequent biomedical applications. However, the detection of the fungal species/spores present in the environment by using CDs is rarely reported. Herein, we demonstrate CDs-based thin film as a sensor for detection of fungal spores from the environment. The procedure of detection is based on fluorescence, observed in the film of carbon dots deposited on quartz plates by using the Blodgett technique. It is observed that the CDs film shows quenching in the fluorescence intensity by the substrate, namely, fungal spores' (Aspergillus niger, Penicillium chrysogenum, Alternaria alternata). The effective features of the present detector system are easy fabrication, low cost, high stability, and a green and economical procedure of synthesis. The process of detecting fungal spores even at low concentration from the atmosphere is relatively fast when compared to presently used methods. Finally, real-world feasibility of the sensor film is tested by its successful application for the determination of the presence fungal spores in the environment. Furthermore, CDs have been also successfully applied for the bio-labeling of Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative) bacterial systems.

Architecturally designed Pt-MoS2 and Pt-graphene composites for electrocatalytic methanol oxidation.

Thin films consisting of platinum nanoparticles (Pt NPs) with uniform size and distribution have been successfully prepared at a liquid-liquid interface. Apart from the usual substrates like glass, Si etc. the films were also deposited on the surfaces of MoS2 thin films and graphene nanosheets (GNS) respectively, by using a layer-by-layer (LbL) deposition technique to form Pt-MoS2 and Pt-GNS composites. The loading concentration of Pt NPs on MoS2 and GNS can be adjusted by selecting the number and sequence of the component layers during LbL deposition. The Pt thin films, Pt-MoS2 and Pt-GNS nanocomposite thin films are characterized using transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), energy dispersive X-ray spectrometry (EDS), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). TEM results of the composites show that Pt NPs with sizes in the range of 1 to 3 nm are uniformly dispersed on the MoS2/GNS surface. The catalytic activities of Pt and Pt-composites for the reaction of methanol oxidation are studied using cyclic voltammetry and chronoamperometry. Electrochemical studies reveal that both the Pt-MoS2 and Pt-GNS nanocomposites show excellent electrocatalytic activity towards methanol oxidation. Pt-MoS2 and Pt-GNS nanocomposite electrodes show excellent stability for reuse of the catalyst. A probable mechanism of catalysis has been discussed. We propose that the similar architecture reported here would be promising for the synthesis of high performance catalysts for fuel cells, gas phase reactions, and other applications such as sensors.

Shape-selective oriented cerium oxide nanocrystals permit assessment of the effect of the exposed facets on catalytic activity and oxygen storage capacity.

The catalytic performance of a range of nanocrystalline CeO2 samples, prepared to have different morphologies, was measured using two accepted indicators; oxygen storage and diesel soot combustion. The same powders were characterized in detail by HR-TEM, XRD, XPS, and Raman methods. The study demonstrates that activity is determined by the relative fraction of the active crystallographic planes, not by the specific surface area of the powders. The physical study is a step toward quantitative evaluation of the relative contribution to activity of the different facets. The synthetic protocol permits fabrication of CeO2 nanostructures with preferentially grown active planes, and therefore has potential in developing catalytic applications and in nanocompositing.

Reduced Graphene Oxide Composite with Oxidizable Manganese/Cobalt Mixed Oxide for p-Cresol Oxidation by Using Molecular Oxygen.

A composite of graphene oxide (GO) with mixed oxide (MnCo) was prepared by using a solvothermal method. During the synthesis, both the reduction of GO and growth of metal oxides took place simultaneously. The as-prepared composite material was highly selective for the liquid-phase oxidation of p-cresol to form p-hydroxybenzaldehyde in 71 % yield within 1 h. The composite material was characterised by SEM, X-ray photoelectron spectroscopy, high-resolution TEM and cyclic voltammetry (CV). A CV study revealed that the increase in the redox potential of the mixed oxide after being supported on GO, led to its higher activity of the catalyst for the oxidation reaction. The stability of the catalyst under the reaction conditions was studied by its successful reuse in three cycles.

A method to form semiconductor quantum dot (QD) thin films by igniting a flame at air-liquid interface: CdS and WO3.

We reveal an easy, inexpensive, efficient one stepflame synthesis of semiconductor/metal oxide thin films at air-liquid interface, subsequently, transferred on suitable substrate. The method has been illustrated by the formation of CdS and WO3 QDs thin films. The features of the present method are (1) Growth of thin films consisting of0.5-2.0nm sized Quantum Dots (QDs)/(ultra-small nanoparticles) in a short time, at the air-liquid interface which can be suitably transferred by a well-known Blodgett technique to an appropriate substrate, (2) The method is suitable to apply layer by layer (LbL) technique to increase the film thickness as well as forming various compositions as revealed by AFM measurements. The films are characterized for their structure (SAED), morphology (TEM), optical properties (UV-Vis.) and photoluminescence (PL). Possible mechanism of formation of QDs thin film and effect of capping in case of CdS QDs is discussed.

Vapor-liquid-solid growth of one-dimensional tin sulfide (SnS) nanostructures with promising field emission behavior.

Single-crystalline ultralong tin sulfide (SnS) nanowires has been grown by a thermal evaporation technique under optimized conditions on gold-coated silicon substrates, and for the first time, field emission investigations on the SnS nanowires at the base pressure of 1 × 10(-8) mbar are reported. It has been revealed that the surface morphology of the as-synthesized SnS nanostructures is significantly influenced by the deposition temperature and duration. Structural and morphological analyses of as-synthesized SnS nanostructures have been carried out using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). To understand the optical and electronic properties of as-synthesized SnS nanowires, ultraviolet-visible (UV-vis), photoluminescence (PL), and X-ray photoelectron spectroscopy (XPS) studies were carried out. The SEM and TEM measurements reveal the formation of ultralong SnS nanowires, with an average diameter of 80 nm. A plausible explanation on the vapor-solid-liquid (VLS) growth mechanism based on the experimental results and reported literature has been presented. Furthermore, the field emission characteristics of the SnS nanowires are found to be superior to the other metal chalcogenide nanostructures. The synthesized SnS nanowire emitter delivers a high current density of ∼2.5 mA/cm(2) at an applied electric field of ∼4.55 V/µm. The emission current stability over a period of 6 h is observed to be good. The observed results demonstrate the potential of the SnS nanowire emitter as an electron source for practical applications in vacuum nano/microelectronic devices.

Mixed Co-Mn Oxide-Catalysed Selective Aerobic Oxidation of Vanillyl Alcohol to Vanillin in Base-Free Conditions.

Manganese-doped cobalt mixed oxide (MnCo-MO) catalyst was prepared by a solvothermal method. The as-prepared catalyst was characterised by X-ray photoelectron spectroscopy, H2 temperature-programmed reduction, O2 temperature-programmed oxidation and XRD. This catalyst gave 62 % conversion with 83 % selectivity to vanillin in 2 hours for the liquid-phase air oxidation of vanillyl alcohol without using base. Three different types of metal oxides were observed in the prepared catalyst, which could be identified as Co3 O4 , Mn3 O4 and CoMn2 O4 . Among these, the tetragonal phase of CoMn2 O4 was found to be more active and selective for vanillyl alcohol oxidation than Co3 O4 and Mn3 O4 . High-resolution TEM characterisation revealed the morphology of MnCo-MO nanorods with a particle size of 10 nm. Successful recycling of the catalyst was also established in this oxidation reaction.

Ecofriendly synthesis and solar photocatalytic activity of S-doped ZnO.

The S-doped ZnO was prepared by new ecofriendly method, which involves simple mechanochemical synthesis followed by thermal decomposition of bisthiourea zinc oxalate (BTZO) powders. The BTZO was characterized by FTIR and TG-DTA analysis while S-doped ZnO crystallite was characterized by XRD, XPS, SEM, EDXS, and photoluminescence (PL) spectra. X-ray diffraction data suggest the single phase wurtzite structure for S-doped ZnO and the incorporation of sulfur expand the lattice constants of ZnO. Room temperature PL spectra show more number of oxygen vacancies in S-doped ZnO as compare to that of pure ZnO. Photocatalytic activity of S-doped ZnO was checked by means of solar photocatalytic degradation (PCD) of resorcinol, using a batch photoreactor. The PCD efficiency of S-doped ZnO was found to be 2 times greater than that of pure ZnO. The inherent relationship between PL intensity and photocatalytic activity of S-doped ZnO was discussed.

Preparation of thin films comprising palladium nanoparticles by a solid-liquid interface reaction technique.

A new approach to the formation of palladium nanoparticulate films with diameter between 6 and 50 nm by the solid-liquid interface reaction technique (SLIRT) has been presented. A solid film of palladium nitrate was formed by the modified spin coating method. This film is subsequently immersed in a reducing solution to initiate a reaction at the interface and ultimately transforms it to a palladium metal film. The kinetics of palladium reduction has been studied by UV-visible spectroscopy. The characterization of the palladium film has been performed by various physicochemical techniques such as XRD, ED, XPS, SEM, EDX, TEM, and UV-visible spectroscopy. The texture and morphology of the materials has been investigated by atomic force microscopy (AFM). At a constant palladium nitrate concentration, the average diameter of palladium nanoparticles decreases with an increase of hydrazine concentration. The effect of concentration of hydrazine on the particle size has been discussed. The palladium film formation mechanism has been proposed for the SLIRT.

Evaluation of subclinical respiratory tract inflammation in heavy smokers who switch to a cigarette-like nicotine delivery device that primarily heats tobacco.

Cigarette smoking remains a major public health problem. For smokers who cannot or do not wish to quit, few options exist to reduce health risks. A cigarette-like nicotine delivery device that heats rather than burns tobacco might deliver nicotine with fewer toxins. The current study was designed to determine whether asymptomatic heavy smokers who did not wish to quit had improvement in lower respiratory tract inflammation after switching to Eclipse, a cigarette-like nicotine delivery device that primarily heats rather than burns tobacco. Twelve smokers of at least 40 cigarettes daily, asymptomatic and in good health, underwent paired bronchoscopies, bronchoalveolar lavages and endobronchial biopsies before and after 2 months of using Eclipse. Eight normal non-smoking individuals were evaluated on one occasion for comparison. Inflammation was assessed by direct inspection and by cytological parameters. Goblet cell metaplasia was assessed histologically. Compared to non-smokers, smokers had increased visible inflammation, increased recovery of inflammatory cells and increased percentage of goblet cells. There were significant reductions in all these parameters following a switch to Eclipse use, although the improvement did not reach the normal range. No significant differences were observed in peripheral blood measures. Nicotine levels were generally maintained, and exhaled carbon monoxide (CO) levels trended strongly upward. One individual experienced a transient twofold increase in CO and concurrently experienced transient headaches. Eclipse use may be a strategy to reduce the health risks for heavy smokers unwilling or unable to quit.