RESUMO
Several studies have reported vapor intrusion (VI) occurring when volatile organic compound (VOC) vapors are transported through subsurface piping systems into building spaces (e.g. conduit VI). Site-specific risk assessment and risk management practices are complicated and evolving for conduit VI, especially at large hazardous waste sites, like Superfund sites, where many stakeholders are involved and have varied interests. Here, we propose a social ecological system (SES) framework as a decision-making tool to inform risk mitigation decisions. We demonstrate the SES framework using field data associated with a Superfund site near San Francisco, California. We evaluate sewer invert elevation and groundwater elevation data, as well as pre- and post- mitigation VOC concentration data within a sewer system. Unexpectedly, the sewer located above the groundwater table was determined to be a potential source of conduit VI risks. The SES framework describes how typical stakeholders associated with the site can affect and be affected by mitigation activities. It informs decisions about mitigation implementation and long-term operation efficacy by considering stakeholder roles and interests. Ultimately, gas siphons were selected as the mitigation technology for the example site. To date, approximately 6 gas siphons have been installed to mitigate conduit VI risks throughout the community. Collectively, our findings advance risk management decisions and highlight key considerations for risk mitigation approaches at hazardous waste sites, including Superfund sites, especially where VI risks are a concern.
RESUMO
Per- and polyfluoroalkyl substances (PFAS) are a class of synthetic compounds widely used in industrial and consumer products. While PFAS provide product durability, these chemicals are ubiquitous, persistent, bioaccumulative, and toxic. These characteristics make the ultimate disposal of PFAS a challenge. One current disposal method is incineration; however, little research has been conducted on the safety and effectiveness of PFAS incineration. The characteristics of communities with hazardous waste incinerators that have received PFAS shipments indicate that more individuals with lower incomes and individuals with less education than the US average are at higher risk of exposure, which presents important environmental justice and health equity concerns of PFAS incineration. Situated in eastern Ohio, East Liverpool is an Appalachian community that is home to a large hazardous-waste incinerator, operated by Heritage WTI, that began accepting PFAS in 2019. Residents are concerned that the disposal lacks the research necessary to assure safety for the residents. Due to both community interest and data gaps regarding PFAS incineration, our research team conducted a pilot study to examine the distribution and concentration of PFAS in soil samples surrounding the incinerator. All 35 soil samples had measurable amounts of PFAS including perfluorobutanesulfonic acid (PFBS), perfluorooctanesulfonic acid (PFOS), perfluorooctanoic acid (PFOA), and hexafluoropropylene oxide dimer acid (HFPO-DA)/GenX. PFOS was measured in the majority of soil samples (97%) with a range of 50-8,300 ng/kg. PFOA was measured in 94% of soil samples with a range of 51 ng/kg to 1300 ng/kg. HFPO-DA/GenX was measurable in 12 soil samples with concentrations of ranging from 150 ng/kg to 1500 ng/kg. Further research on PFAS disposal will advance knowledge and action related to regulatory requirements and exposure prevention, ultimately improving individual and community protections and health equity.
Assuntos
Ácidos Alcanossulfônicos , Fluorocarbonos , Humanos , Incineração , Ohio , Solo , Justiça Ambiental , Projetos Piloto , Fluorocarbonos/análiseRESUMO
BACKGROUND: Funding agencies, publishers, and other stakeholders are pushing environmental health science investigators to improve data sharing; to promote the findable, accessible, interoperable, and reusable (FAIR) principles; and to increase the rigor and reproducibility of the data collected. Accomplishing these goals will require significant cultural shifts surrounding data management and strategies to develop robust and reliable resources that bridge the technical challenges and gaps in expertise. OBJECTIVE: In this commentary, we examine the current state of managing data and metadata-referred to collectively as (meta)data-in the experimental environmental health sciences. We introduce new tools and resources based on in vivo experiments to serve as examples for the broader field. METHODS: We discuss previous and ongoing efforts to improve (meta)data collection and curation. These include global efforts by the Functional Genomics Data Society to develop metadata collection tools such as the Investigation, Study, Assay (ISA) framework, and the Center for Expanded Data Annotation and Retrieval. We also conduct a case study of in vivo data deposited in the Gene Expression Omnibus that demonstrates the current state of in vivo environmental health data and highlights the value of using the tools we propose to support data deposition. DISCUSSION: The environmental health science community has played a key role in efforts to achieve the goals of the FAIR guiding principles and is well positioned to advance them further. We present a proposed framework to further promote these objectives and minimize the obstacles between data producers and data scientists to maximize the return on research investments. https://doi.org/10.1289/EHP11484.
Assuntos
Saúde Ambiental , Genômica , Reprodutibilidade dos Testes , Disseminação de Informação , MetadadosRESUMO
Exposure to per- and polyfluoroalkyl substances (PFAS) in drinking water is widely recognized as a public health concern. Decision-makers who are responsible for managing PFAS drinking water risks lack the tools to acquire the information they need. In response to this need, we provide a detailed description of a Kentucky dataset that allows decision-makers to visualize potential hot-spot areas and evaluate drinking water systems that may be susceptible to PFAS contamination. The dataset includes information extracted from publicly available sources to create five different maps in ArcGIS Online and highlights potential sources of PFAS contamination in the environment in relation to drinking water systems. As datasets of PFAS drinking water sampling continue to grow as part of evolving regulatory requirements, we used this Kentucky dataset as an example to promote the reuse of this dataset and others like it. We incorporated the FAIR (Findable, Accessible, Interoperable, and Reusable) principles by creating a Figshare item that includes all data and associated metadata with these five ArcGIS maps.
Assuntos
Água Potável , Fluorocarbonos , Poluentes Químicos da Água , Água Potável/análise , Poluentes Químicos da Água/análise , Fluorocarbonos/análise , Saúde Pública , Sequência de BasesRESUMO
We present a draft Minimum Information About Geospatial Information System (MIAGIS) standard for facilitating public deposition of geospatial information system (GIS) datasets that follows the FAIR (Findable, Accessible, Interoperable and Reusable) principles. The draft MIAGIS standard includes a deposition directory structure and a minimum javascript object notation (JSON) metadata formatted file that is designed to capture critical metadata describing GIS layers and maps as well as their sources of data and methods of generation. The associated miagis Python package facilitates the creation of this MIAGIS metadata file and directly supports metadata extraction from both Esri JSON and GEOJSON GIS data formats plus options for extraction from user-specified JSON formats. We also demonstrate their use in crafting two example depositions of ArcGIS generated maps. We hope this draft MIAGIS standard along with the supporting miagis Python package will assist in establishing a GIS standards group that will develop the draft into a full standard for the wider GIS community as well as a future public repository for GIS datasets.
Assuntos
Sistemas de Informação , MetadadosRESUMO
As health-based drinking water standards for per- and polyfluorinated alkyl substances (PFAS) continue to evolve, public health and environmental protection decision-makers must assess exposure risks associated with all public drinking water systems in the United States (US). Unfortunately, current knowledge regarding the presence of PFAS in environmental systems is limited. In this study, a screening approach was established to: (1) identify and direct attention toward potential PFAS hot spots in drinking water sources, (2) prioritize sampling locations, and (3) provide insights regarding the potential PFAS sources that contaminate groundwater and surface water. Our approach incorporates geospatial data from public sources, including the US Environmental Protection Agency's Toxic Release Inventory, to identify locations where PFAS may be present in drinking water sources. An indicator factor (also known as "risk factor") was developed as a function of distance between potential past and/or present PFAS users (e.g., military bases, industrial sites, and airports) and the public water system, which generates a heat map that visualizes potential exposure risks. A binomial logistic regression model indicates whether PFAS are likely to be detected in public water systems. The results obtained using the developed screening approach aligned well (with a 76% overall model accuracy) with PFAS sampling and chemical analysis data from 81 public drinking water systems in the state of Kentucky. This study proposes this screening model as an effective decision aid to assist key decision-makers in identifying and prioritizing sampling locations for potential PFAS exposure risks in the public drinking water sources in their service areas. Integr Environ Assess Manag 2023;19:163-174. © 2022 SETAC.
Assuntos
Água Potável , Fluorocarbonos , Água Subterrânea , Poluentes Químicos da Água , Estados Unidos , Água Potável/análise , Poluentes Químicos da Água/análise , Modelos Logísticos , Fluorocarbonos/análise , Água Subterrânea/químicaRESUMO
Cured-in-place pipes (CIPPs) are plastic liners manufactured inside existing damaged sanitary sewer, storm sewer, and water pipes that extend the service life of host pipes. This process often is conducted in neighborhoods and near roadways. Before, during, and after plastic manufacture, waste materials that include volatile materials are released into the air. Emissions from this manufacturing process can affect outdoor air quality and indoor air quality for buildings connected to the sewer system. We identified key issues and solicited stakeholder feedback to estimate and manage public health risks of CIPP-generated chemical air pollution. A work group representing 13 U.S. agencies and public health associations provided feedback and prioritized public health issues for action. To mitigate potential public and occupational health risks, additional testing and public health educational efforts were recommended. An improved understanding of CIPP chemical exposure pathways, as well as stakeholder needs and interests, is essential.
RESUMO
We developed and validated a method for direct determination of per- and polyfluoroalkylated substances (PFASs) in environmental water samples without prior sample concentration. Samples are centrifuged and supernatants passed through an Acrodisc Filter (GXF/GHP 0.2 um, 25 mm diameter). After addition of ammonium acetate, samples are analyzed by UPLC-MS/MS using an AB Sciex 6500 plus Q-Trap mass spectrometer operated in negative multiple reaction-monitoring (MRM) mode. The instrument system incorporates a delay column between the pumps and autosampler to mitigate interference from background PFAS. The method monitors eight short-/long-chain PFAS which are identified by monitoring specific precursor product ion pairs and by their retention times and quantified using isotope mass-labeled internal standard based calibration plots. Average spiked recoveries (n = 8) of target analytes ranged from 84 to 110% with 4-9% relative standard deviation (RSD). The mean spiked recoveries (n = 8) of four surrogates were 94-106% with 3-8% RSD. For continuous calibration verification (CCV), average spiked recoveries (n = 8) for target analytes ranged from 88 to 114% with 4-11% RSD and for surrogates ranged from 104-112% with 3-11% RSD. The recoveries (n = 6) of matrix spike (MX), matrix spike duplicate (MXD), and field reagent blank (FRB) met our acceptance criteria. The limit of detection for the target analytes was between 0.007 and 0.04 ng/mL. The method was used to measure PFAS in tap water and surface water.
Assuntos
Cromatografia Líquida , Água Potável , Fluorocarbonos , Espectrometria de Massas em Tandem , Extração em Fase SólidaRESUMO
Hazardous waste site investigations have shown that volatile organic compounds (VOCs) can be transported via sewer pipes and migrate into indoor spaces. Despite field data confirming the presence of this exposure pathway, there is lack of context-based numerical models that provide guidance to characterize and predict VOCs concentration in sewer gas at vapor intrusion sites. Particularly, this poses a challenge when assessing and mitigating risks associated with these exposure pathways. Therefore, a numerical model has been developed to simulate the concentration of VOCs in sewer gas in different stages throughout the sewer lines. The developed model considers various input parameters, including temperature, sewer liquid depth, groundwater depth, and sewer construction characteristics to incorporate local and operational conditions. The model's output is verified using field data from a sewer system constructed near a Superfund site. Moreover, a sensitivity analysis was conducted to evaluate the model's response to variation of the external input parameters. To the best of our knowledge, this study is the first attempt to model VOCs concentration in sewer gas, particularly to address vapor intrusion. The developed model can be used as a numerical tool to support the development of sewer assessment guidelines, risk assessment studies, and mitigation strategies.
RESUMO
In the midst of the COVID-19 pandemic, United States (U.S.) educational institutions must weigh incomplete scientific evidence to inform decisions about how best to re-open schools without sacrificing public health. While many communities face surging case numbers, others are experiencing case plateaus or even decreasing numbers. Simultaneously, some U.S. school systems face immense infrastructure challenges and resource constraints, while others are better positioned to resume face-to-face instruction. In this review, we first examine potential engineering controls to reduce SARS-CoV-2 exposures; we then present processes whereby local decision-makers can identify and partner with scientists, faculty, students, parents, public health officials, and others to determine the controls most appropriate for their communities. While no solution completely eliminates risks of SARS-CoV-2 exposure and illness, this mini-review discusses engaged decision and communication processes that incorporate current scientific knowledge, school district constraints, local tolerance for health risk, and community priorities to help guide schools in selecting and implementing re-opening strategies that are acceptable, feasible, and context-specific.
Assuntos
COVID-19/epidemiologia , COVID-19/prevenção & controle , Comunicação , Retorno à Escola , Participação dos Interessados , COVID-19/transmissão , Controle de Doenças Transmissíveis/métodos , Controle de Doenças Transmissíveis/organização & administração , Controle de Doenças Transmissíveis/estatística & dados numéricos , Humanos , Saúde Pública , Retorno à Escola/organização & administração , Risco , SARS-CoV-2 , Estados Unidos/epidemiologiaRESUMO
There is a lack of vapor intrusion (VI) models that reliably account for weather conditions and building characteristics, especially at sites where active alternative pathways, such as sewer connections and other preferential pathways, are present. Here, a method is presented to incorporate freely-available models, CONTAM, and CFD0, to estimate site-specific building air exchange rates (AERs) and indoor air contaminant concentrations by accounting for weather conditions and building characteristics at a well-known VI site with a land drain preferential pathway. To account for uncertainty in model input parameters that influence indoor air chlorinated volatile organic compound (CVOC) concentration variability, this research incorporated Monte Carlo simulations and compared model results with retrospective field data collected over approximately 1.5 years from the study site. The results of this research show that mass entry rates for TCE are likely influenced by indoor air pressures that can be modeled as a function of weather conditions (over seasons) and building characteristics. In addition, the results suggest that temporal variability in indoor air TCE concentrations is greatest (modeled and measured) due to the existence of a land drain, which acts as a preferential pathway, from the subsurface to the granular fill beneath the floor slab. The field data and modeling results are in good agreement and provide a rare comparison of field data and modeling results for a VI site. The modeling approach presented here offers a useful tool for decision makers and VI practitioners as they assess these complex and variable processes that have not been incorporated within other VI models.
Assuntos
Poluentes Atmosféricos , Poluição do Ar em Ambientes Fechados , Tricloroetileno , Estudos Retrospectivos , Temperatura , VentoRESUMO
Indoor air concentrations are susceptible to temporal and spatial variations and have long posed a challenge to characterize for vapor intrusion scientists, in part, because there was a lack of evidence to draw conclusions about the role that building and weather conditions played in altering vapor intrusion exposure risks. Importantly, a large body of evidence is available within the building science discipline that provides information to support vapor intrusion scientists in drawing connections about fate and transport processes that influence exposure risks. Modeling tools developed within the building sciences provide evidence of reported temporal and spatial variation of indoor air contaminant concentrations. In addition, these modeling tools can be useful by calculating building air exchange rates (AERs) using building specific features. Combining building science models with vapor intrusion models, new insight to facilitate decision-making by estimating indoor air concentrations and building ventilation conditions under various conditions can be gained. This review highlights existing building science research and summarizes the utility of building science models to improve vapor intrusion exposure risk assessments.
Assuntos
Poluentes Atmosféricos/análise , Poluição do Ar em Ambientes Fechados/análise , Exposição Ambiental/análise , Monitoramento Ambiental/métodos , Gases/análise , Modelos Teóricos , Medição de Risco/métodosRESUMO
Sewer systems have been recently recognized as potentially important exposure pathways to consider during vapor intrusion assessments; however, this pathway has not been well-characterized and there is need for additional information about the occurrence of volatile organic compounds (VOCs) in sewer systems. This paper reports the results of sewer gas sampling conducted in a sanitary sewer over the years of 2014-2017. Sewer gas samples were collected and analyzed using several different techniques, including TO-15 (grab), TO-17 (passive), Radiello® (passive) and a novel continuous monitoring technique, the Autonomous Rugged Optical Multigas Analyzer (AROMA). The applicability of each of the different approaches used in this study is discussed in the context of investigating sanitary sewers as a vapor intrusion alternative pathway. The data confirmed that trichloroethylene (TCE) concentrations in sewer gas were detected adjacent to and extending hundreds of feet away from a previously defined vapor intrusion area, where TCE was a primary contaminant. TCE concentrations detected in sewer gas ranged from non-detect to 1600µg/m3. Temporal variability was observed in TCE concentrations over timescales that ranged from minutes to months to years at discrete sampling locations. Spatial variability in sewer gas concentrations was also observed throughout the study area. Temporal and spatial variability may be caused by groundwater contamination sources in the study area, as well as sewer gas transport mechanisms.
RESUMO
Vapor intrusion (IV) exposure risks are difficult to characterize due to the role of atmospheric, building and subsurface processes. This study presents a three-dimensional VI model that extends the common subsurface fate and transport equations to incorporate wind and stack effects on indoor air pressure, building air exchange rate (AER) and indoor contaminant concentration to improve VI exposure risk estimates. The model incorporates three modeling programs: (1) COMSOL Multiphysics to model subsurface fate and transport processes, (2) CFD0 to model atmospheric air flow around the building, and (3) CONTAM to model indoor air quality. The combined VI model predicts AER values, zonal indoor air pressures and zonal indoor air contaminant concentrations as a function of wind speed, wind direction and outdoor and indoor temperature. Steady state modeling results for a single-story building with a basement demonstrate that wind speed, wind direction and opening locations in a building play important roles in changing the AER, indoor air pressure, and indoor air contaminant concentration. Calculated indoor air pressures ranged from approximately -10 Pa to +4 Pa depending on weather conditions and building characteristics. AER values, mass entry rates and indoor air concentrations vary depending on weather conditions and building characteristics. The presented modeling approach can be used to investigate the relationship between building features, AER, building pressures, soil gas concentrations, indoor air concentrations and VI exposure risks.
Assuntos
Poluentes Atmosféricos/análise , Poluição do Ar em Ambientes Fechados/análise , Modelos Teóricos , Compostos Orgânicos Voláteis/análise , Vento , Pressão do Ar , Gases/análise , Habitação , Solo/químicaRESUMO
Investigation of indoor air quality has been on the upswing in recent years. In this article, we focus on how the transport of subsurface vapors into indoor air spaces, a process known as "vapor intrusion," (VI) is defined and addressed. For environmental engineers and physical scientists who specialize in this emerging indoor environmental exposure science, VI is notoriously difficult to characterize, leading the regulatory community to seek improved science-based understandings of VI pathways and exposures. Yet despite the recent growth in VI science and competition between environmental consulting companies, VI studies have largely overlooked the social and political field in which VI problems emerge and are experienced by those at risk. To balance and inform current VI studies, this article explores VI science and policy and develops a critique of what we call "source science politics." Drawing inspiration from the creative synthesis of social and environmental science/engineering perspectives, the article offers a transdisciplinary approach to VI that highlights collaboration with social scientists and impacted communities and cultivates epistemic empathy.
RESUMO
Vapor intrusion (VI) is well-known to be difficult to characterize because indoor air (IA) concentrations exhibit considerable temporal and spatial variability in homes throughout impacted communities. To overcome this and other limitations, most VI science has focused on subsurface processes; however there is a need to understand the role of aboveground processes, especially building operation, in the context of VI exposure risks. This tutorial review focuses on building air exchange rates (AERs) and provides a review of literature related building AERs to inform decision making at VI sites. Commonly referenced AER values used by VI regulators and practitioners do not account for the variability in AER values that have been published in indoor air quality studies. The information presented herein highlights that seasonal differences, short-term weather conditions, home age and air conditioning status, which are well known to influence AERs, are also likely to influence IA concentrations at VI sites. Results of a 3D VI model in combination with relevant AER values reveal that IA concentrations can vary more than one order of magnitude due to air conditioning status and one order of magnitude due to house age. Collectively, the data presented strongly support the need to consider AERs when making decisions at VI sites.
Assuntos
Movimentos do Ar , Poluição do Ar em Ambientes Fechados , Modelos Teóricos , Tomada de Decisões , Gases , HabitaçãoRESUMO
Vapor intrusion (VI) is a term used to describe indoor air (IA) contamination that occurs due to the migration of chemical vapors in the soil and groundwater. The overall vapor transport process depends on several factors such as contaminant source characteristics, subsurface conditions, building characteristics, and general site conditions. However, the classic VI conceptual model does not adequately account for the physics of airflow around and inside a building and does not account for chemical emissions from alternative "preferential" pathways (e.g. sewers and other utility connections) into IA spaces. This mini-review provides information about recent research related to building air exchange rates (AERs) and alternative pathways to improve the accuracy of VI exposure risk assessment practices. First, results from a recently published AER study for residential homes across the United States (US) are presented and compared to AERs recommended by the US Environmental Protection Agency (USEPA). The comparison shows considerable differences in AERs when season, location, building age, and other factors are considered. These differences could directly impact VI assessments by influencing IA concentration measurements. Second, a conceptual model for sewer gas entry into buildings is presented and a summary of published field studies is reported. The results of the field studies suggest that alternative pathways for vapors to enter indoor spaces warrant consideration. Ultimately, the information presented in this mini-review can be incorporated into a multiple-lines-of-evidence approach for assessing site-specific VI exposure risks.
Assuntos
Poluição do Ar em Ambientes Fechados/análise , Monitoramento Ambiental/métodos , Medição de Risco/métodos , Estados UnidosRESUMO
USEPA recommends a multiple lines of evidence approach to make informed decisions at vapor intrusion sites because the vapor intrusion pathway is notoriously difficult to characterize. Our study uses this approach by incorporating groundwater, soil gas, indoor air field measurements and numerical models to evaluate vapor intrusion exposure risks in a Metro-Boston neighborhood known to exhibit lower than anticipated indoor air concentrations based on groundwater concentrations. We collected and evaluated five rounds of field sampling data over the period of one year. Field data results show a steep gradient in soil gas concentrations near the groundwater surface; however as the depth decreases, soil gas concentration gradients also decrease. Together, the field data and the numerical model results suggest that a subsurface feature is limiting vapor transport into indoor air spaces at the study site and that groundwater concentrations are not appropriate indicators of vapor intrusion exposure risks in this neighborhood. This research also reveals the importance of including relevant physical models when evaluating vapor intrusion exposure risks using the multiple lines of evidence approach. Overall, the findings provide insight about how the multiple lines of evidence approach can be used to inform decisions by using field data collected using regulatory-relevant sampling techniques, and a well-established 3-D vapor intrusion model.
Assuntos
Poluentes Atmosféricos/análise , Poluição do Ar/estatística & dados numéricos , Exposição Ambiental/estatística & dados numéricos , Poluição do Ar em Ambientes Fechados/estatística & dados numéricos , Boston , Gases/análise , Água Subterrânea/química , Humanos , Modelos Químicos , VolatilizaçãoRESUMO
The Johnson and Ettinger (J&E) model is the most widely used vapor intrusion model in the United States. It is routinely used as part of hazardous waste site assessments to evaluate the potential for vapor intrusion exposure risks. This study incorporates mathematical approaches that allow sensitivity and uncertainty of the J&E model to be evaluated. In addition to performing Monte Carlo simulations to examine the uncertainty in the J&E model output, a powerful global sensitivity analysis technique based on Sobol indices is used to evaluate J&E model sensitivity to variations in the input parameters. The results suggest that the J&E model is most sensitive to the building air exchange rate, regardless of soil type and source depth. Building air exchange rate is not routinely measured during vapor intrusion investigations, but clearly improved estimates and/or measurements of the air exchange rate would lead to improved model predictions. It is also found that the J&E model is more sensitive to effective diffusivity than to effective permeability. Field measurements of effective diffusivity are not commonly collected during vapor intrusion investigations; however, consideration of this parameter warrants additional attention. Finally, the effects of input uncertainties on model predictions for different scenarios (e.g., sandy soil as compared to clayey soil, and "shallow" sources as compared to "deep" sources) are evaluated. Our results not only identify the range of variability to be expected depending on the scenario at hand, but also mark the important cases where special care is needed when estimating the input parameters to which the J&E model is most sensitive.