Strong, Shape-Memory Lignocellulosic Aerogel via Wood Cell Wall Nanoscale Reassembly.

Polymer shape-memory aerogels (PSMAs) are prospects in various fields of application ranging from aerospace to biomedicine, as advanced thermal insulators, actuators, or sensors. However, the fabrication of PSMAs with good mechanical performance is challenging and is currently dominated by fossil-based polymers. In this work, strong, shape-memory bio-aerogels with high specific surface areas (up to 220 m2/g) and low radial thermal conductivity (0.042 W/mK) were prepared through a one-step treatment of native wood using an ionic liquid mixture of [MTBD]+[MMP]-/DMSO. The aerogel showed similar chemical composition similar to native wood. Nanoscale spatial rearrangement of wood biopolymers in the cell wall and lumen was achieved, resulting in flexible hydrogels, offering design freedom for subsequent aerogels with intricate geometries. Shape-memory function under stimuli of water was reported. The chemical composition and distribution, morphology, and mechanical performance of the aerogel were carefully studied using confocal Raman spectroscopy, AFM, SAXS/WAXS, NMR, digital image correlation, etc. With its simplicity, sustainability, and the broad range of applicability, the methodology developed for nanoscale reassembly of wood is an advancement for the design of biobased shape-memory aerogels.

Nanostructurally Controllable Strong Wood Aerogel toward Efficient Thermal Insulation.

Eco-friendly materials with superior thermal insulation and mechanical properties are desirable for improved energy- and space-efficiency in buildings. Cellulose aerogels with structural anisotropy could fulfill these requirements, but complex processing and high energy demand are challenges for scaling up. Here we propose a scalable, nonadditive, top-down fabrication of strong anisotropic aerogels directly from wood with excellent, near isotropic thermal insulation functions. The aerogel was obtained through cell wall dissolution and controlled precipitation in lumen, using an ionic liquid (IL) mixture comprising DMSO and a guanidinium phosphorus-based IL [MTBD][MMP]. The wood aerogel shows a unique structure with lumen filled with nanofibrils network. In situ formation of a cellulosic nanofibril network in the lumen results in specific surface areas up to 280 m2/g and high yield strengths >1.2 MPa. The highly mesoporous structure (average pore diameter ∼20 nm) of freeze-dried wood aerogels leads to low thermal conductivities in both the radial (0.037 W/mK) and axial (0.057 W/mK) directions, showing great potential as scalable thermal insulators. This synthesis route is energy efficient with high nanostructural controllability. The unique nanostructure and rare combination of strength and thermal properties set the material apart from comparable bottom-up aerogels. This nonadditive synthesis approach is believed to contribute significantly toward large-scale design and structure control of biobased aerogels.

Installation of an aryl boronic acid function into the external section of N-aryl-oxazolidinones: Synthesis and antimicrobial evaluation.

N-aryl-oxazolidinones is a prominent family of antimicrobials used for treating infections caused by clinically prevalent Gram-positive bacteria. Recently, boron-containing compounds have displayed intriguing potential in the antibiotic discovery setting. Herein, we report the unprecedented introduction of a boron-containing moiety such as an aryl boronic acid in the external region of the oxazolidinone structure via a chemoselective acyl coupling reaction. As a result, we accessed a series of analogues with a distal aryl boronic pharmacophore on the oxazolidinone scaffold. We identified that a peripheric linear conformation coupled with freedom of rotation and no further substitution on the external aryl boronic ring, an amido linkage with hydrogen bonding character, in addition to a para-relative disposition between boronic group and linker, are the optimal combination of structural features in this series for antimicrobial activity. In comparison to linezolid, the analogue comprising all those features, compound 20b, displayed levels of antimicrobial activity augmented by an eight-fold to a thirty-two-fold against a panel of Gram-positive strains, and a near one hundred-fold against Escherichia coli JW5503, a Gram-negative mutant strain with a defective efflux capability.

On the Mechanism of the Reactivity of 1,3-Dialkylimidazolium Salts under Basic to Acidic Conditions: A Combined Kinetic and Computational Study.

Comprehensive spectroscopic kinetic studies illustrate an alternative mechanism for the traditional free-carbene intermediated H/D exchange reaction of 1,3-dialkylimidazolium salts under neutral (D2 O) and acidic conditions (DCl/D2 O 35 wt % solution). The deuteration of high purity [bmim]Cl in D2 O is studied at different temperatures, in absence of catalyst or impurities, to yield an activation energy. DFT transition-state modelling, of a small water cluster and [bmim] cation, also yields an activation energy which strongly supports the proposed mechanism. The presence of basic impurities are shown to significantly enhance the exchange reaction, which brings into question the need for further analysis of technical purities of ionic liquids and the implications for a wide range of chemical reactions in such media.

A One-Pot Synthesis of N-Aryl-2-Oxazolidinones and Cyclic Urethanes by the Lewis Base Catalyzed Fixation of Carbon Dioxide into Anilines and Bromoalkanes.

The multicomponent assembly of pharmaceutically relevant N-aryl-oxazolidinones through the direct insertion of carbon dioxide into readily available anilines and dibromoalkanes is described. The addition of catalytic amounts of an organosuperbase such as Barton's base enables this transformation to proceed with high yields and exquisite substrate functional-group tolerance under ambient CO2 pressure and mild temperature. This report also provides the first proof-of-principle for the single-operation synthesis of elusive seven-membered ring cyclic urethanes.

Diverting Hydrogenations with Wilkinson's Catalyst towards Highly Reactive Rhodium(I) Species.

The addition of Barton's base has a dramatic effect on the classic rhodium(III)-mediated hydrogenations promoted by Wilkinson's catalyst. Following the initial oxidative addition, a barrierless reductive elimination of HCl from the traditional rhodium(III) intermediates instantly produces a rhodium(I) monohydride species, which is remarkably reactive in the hydrogenation of several internal alkynes and functionalized trisubstituted alkenes. The direct formation of this species is unprecedented upon addition of molecular hydrogen and its catalytic potential has been hitherto barely explored.

Direct assembly of 2-oxazolidinones by chemical fixation of carbon dioxide.

The reaction of ß- and γ-haloamines with carbon dioxide to give pharmaceutically relevant 2-oxazolidinones and 1,3-dioxazin-2-ones, was found to proceed efficiently in the presence of a base and in the absence of catalyst. After optimization of reaction conditions, the system was successfully expanded to a variety of haloamines, even at multigram scale. The reaction was further studied in silico by DFT calculations.

Touching the upper limit for ferromagnetic interactions in hetero-bridged dinuclear [Cu2(II)] complexes using a novel N5-dinucleating ligand bearing an endogenous monoatomic amido(R-NH(-))-bridging group.

A novel N(5)-dinucleating ligand 4-amino-3,5-bis(bipyridine-2-yl)-1,2,4-triazole allows the preparation for the first time, and under mild conditions, of single and mixed amido(R-NH(-))-bridged copper(II) complexes, the latter exhibiting very strong ferromagnetic coupling.

Antiferromagnetic versus ferromagnetic exchange interactions in bis(µ-O(oximate))dinickel(II) units for a series of closely related cube shaped carboxamideoximate-bridged Ni(4) complexes. A combined experimental and theoretical magneto-structural study.

The syntheses, crystal structures, and the experimental and theoretical magnetochemical characterization for three tetrametallic Ni(II) clusters, namely, [Ni(4)(L)(4)(Cl)(2)(MeOH)(2)](ClO(4))(2)·4MeOH (1), [Ni(4)(L)(4)(N(3))(2)(MeOH)(2)](ClO(4))(2)·2MeOH (2), and [Ni(4)(L1)(4)(pyz)(2)(PhCOO)(2)(MeOH)(2)](ClO(4))(2)·7MeOH (3) (where HL and HL1 represent bipyridine-2-carboxamideoxime and pyrimidine-2-carboxamideoxime, respectively) are reported. Within the Ni(4)(2+) units of these compounds, distorted octahedral Ni(II) ions are bridged by carboxamideoximato ligands to adopt a distorted tetrahedral disposition. The Ni(4)(2+) unit, of C(2) symmetry, can also be viewed as a cube with single [O-atom] and double [NO oxime] bridging groups as atom edges, which define two almost square-planar Ni(O)(2)Ni rings and four irregular hexagonal Ni(NO)(2)Ni rings. To analyze the magnetic properties of 1-3, we have considered the simplest two-J model, where J(1) = J(2) (exchange interactions between the Ni(II) ions belonging to the Ni(O)(2)Ni square rings) and J(a) = J(b) = J(c) = J(d) (exchange interactions between the Ni(II) ions belonging to the Ni-(NO)(2)Ni hexagonal rings) with the Hamiltonian H = -J(1)(S(1)S(2) + S(3)S(4)) - J(a)(S(1)S(3) + S(1)S(4) + S(2)S(3) + S(2)S(4)). The J(1) and J(a) values derived from the fitting of the experimental susceptibility data are -5.8 cm(-1) and -22.1 cm(-1) for 1; -2.4 cm(-1) and -22.8 cm(-1) for 2, and +15.6 cm(-1) and -10.8 cm(-1) for 3. The magneto-structural results and density-functional theory (DFT) calculations demonstrate that the exchange interactions inside the Ni(µ-O)(2)Ni square rings depend on the Ni-O-Ni bridging angle (θ) and the out-of-plane angle of the NO oximate bridging group with respect to the Ni(O)(2)Ni plane (τ), whereas the interactions propagated through the Ni-N-O(Ni)-Ni exchange pathways defining the side of the hexagonal rings depend on the Ni-N-O-Ni torsion angle (α). In both cases, theoretical magneto-structural correlations were obtained, which allow the prediction of the angle for which ferromagnetic interactions are expected. For compound 3, the existence of the axial magnetic exchange pathway through the syn-syn benzoate bridge may also contribute (in addition to the θ and τ angles) to the observed F interaction in this compound through orbital countercomplementarity, which has been supported by DFT calculations. Finally, DFT calculations clearly show that the antiferromagnetic exchange increases when the dihedral angle between the O-Ni-O planes of the Ni(µ-O)(2)Ni square ring, ß, increases.

A unique single carboxylate-bridged spin-frustrated chiral Mn(II) metallatriangle.

The reaction between Hmbpymca ligand (prepared in situ from the hydrolysis of 5-methyl-4-cyano-bispyrimidine with NaOH and further neutralization with 2 M HCl) and Mn(ClO(4))(2)·4H(2)O in 1:1 molar ratio afforded the triangulo-trimanganese(II) complex [Mn(3)(bpymca)(3)(H(2)O)(6)]Cl(3)·6H(2)O 1. The chloride anions in this complex come from the HCl used in the neutralization process. The molecular structure of 1 consists of cationic molecular triangles [Mn(3)(µ-mbpymca)(3)(H(2)O)(6)](3+) with C(3) symmetry, chloride anions and crystallization water molecules, all of them involved in an extensive network of hydrogen bonds, leading to a chiral network. Within the [Mn(3)(µ-mbpymca)(3)(H(2)O)(6)](3+) cations, seven-coordinated Mn(II) ions are bridged by both oxygen atoms of the carboxylate groups and exhibit a MnO(5)N(2) compressed pentagonal bipyramidal coordination environment. The temperature dependence of the magnetic susceptibility shows the presence of weak antiferromagnetic interactions between Mn(II) ions mediated by the carboxylate group of the mbpymca ligand and the existence of a 3D antiferromagnetic ordering below 4 K, which has its origin in the AF inter-trimer exchange interactions mediated by the strong hydrogen bonds present in the crystal of 1. The experimental magnetic susceptibility data above 7 K could be satisfactorily fitted to the theoretical analytical expression derived from the spin Hamiltonian H = -J(S(1)S(2) + S(1)S(3) + S(2)S(3)) with J = -0.782(3) cm(-1) and g = 2.092(3). The model predicts a degenerate ground state with an S = 1/2, which is typical of triangular trimetallic spin frustrated systems containing metal with non-integer spins. DFT calculations were performed on the molecular structure as found in the solid state to support the experimental J value and the Mn-O(carb)-Mn as the primarily exchange pathway.

A Paterno-Büchi approach to the synthesis of merrilactone A.

A six-step approach to the tetracyclic core of merrilactone A is described that uses an intramolecular Paterno-Büchi photoaddition to install the key oxetane ring. Irradiation of bicyclic enone 16, constructed through cyclopentenone alkylation followed by a domino oxy-/carbopalladation reaction, produces the tetracyclic oxetane 17 in excellent yield, having the core carbon skeleton of the target compound merrilactone A. [reaction: see text]