Effect of particle size of nanoscale zero-valent copper on inorganic phosphorus adsorption-desorption in a volcanic ash soil.

Zero-valent copper engineered nanoparticles (Cu-ENPs) released through unintentional or intentional actions into the agricultural soils can alter the availability of inorganic phosphorus (IP) to plants. In this study, we used adsorption-desorption experiments to evaluate the effect of particle size of 1% Cu-ENPs (25 nm and 40-60 nm) on IP availability in Santa Barbara (SB) volcanic ash soil. X-Ray Diffraction results showed that Cu-ENPs were formed by a mixture of Cu metallic and Cu oxides (Cu2O or/and CuO) species, while specific surface area values showed that Cu-ENPs/25 nm could form larger aggregate particles compared to Cu-ENPs/40-60 nm. The kinetic IP adsorption of SB soil without and with 1% Cu-ENPs (25 nm and 40-60 nm) followed the mechanism described by the pseudo-second-order (k2 = 0.45-1.13 x 10-3 kg mmol-1 min-1; r2 ≥ 0.999, and RSS ≤ 0.091) and Elovich (α = 14621.10-3136.20 mmol kg-1 min-1; r2 ≥ 0.984, and RSS ≤ 69) models. Thus, the rate-limiting step for IP adsorption in the studied systems was chemisorption on a heterogeneous surface. Adsorption equilibrium isotherms without Cu-ENPs were fitted well to the Freundlich model, while with 1% Cu-ENPs (25 nm and 40-60 nm), isotherms were described best by the Freundlich and/or Langmuir model. The IP relative adsorption capacity (KF) was higher with 1% Cu-ENPs/40-60 nm (KF = 110.41) than for 1% Cu-ENPs/25 nm (KF = 74.40) and for SB soil (KF = 48.17). This study showed that plausible IP retention mechanisms in the presence of 1% Cu-ENPs in SB soil were: i) ligand exchange, ii) electrostatic attraction, and iii) co-precipitate formation. The desorption study demonstrated that 1% Cu-ENPs/40-60 nm increased the affinity of IP in SB soil with a greater effect than 1% Cu-ENPs/25 nm. Thus, both the studied size ranges of Cu-ENPs could favor an accumulation of IP in volcanic ash soils.

Antioxidant Activity as an Indicator of the Efficiency of Plant Extract-Mediated Synthesis of Zinc Oxide Nanoparticles.

The green synthesis of zinc oxide nanoparticles (ZnO NPs) using a diverse range of plant species has been extensively reported. Despite the success achieved by biogenic synthesis, there are problems with the control and prediction of the properties of ZnO NPs, due to phytochemical diversity between plant species. In this sense, the main objective of our work was to investigate the effect of the antioxidant activity (AA) of plant extracts on the physicochemical characteristics of ZnO NPs (production yield, chemical composition, polydispersity index (PDI), surface charge (ζ-potential) and average particle size). In order to accomplish this objective, four plant extract with different antioxidant activities were used: Galega officinalis, Buddleja globosa, Eucalyptus globulus, and Aristotelia chilensis. Phytochemical screening, quantitative analysis of phenolic compounds and antioxidant activity determination of the different extracts were carried out. Chemical species such as catechin, malvidin, quercetin, caffeic acid, and ellagic acid were the dominant components, found in the extracts studied. The A. chilensis extract showed the highest value of total phenolic compounds (TPC) and AA, followed by E. globulus, B. globosa and G. officinalis. Zetasizer, Fourier-transform infrared (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA) data show that plant extracts with lower AA leads to a decrease in the yield of ZnO NPs and an increase in the amount of residual organic extract that remains on the particles. The latter caused an increase in the average particle size, PDI and ζ-potential as a consequence of agglomeration and particle coarsening. Our result suggest that it is possible to use the AA as an indicator of the potential reducing capacity of plant extracts. In this way it is possible to guarantee the reproducibility of the synthesis process as well as ensure the formation of ZnO NPs with desired characteristics.

Sulfidogenic Bioreactor-Mediated Formation of ZnS Nanoparticles with Antimicrobial and Photocatalytic Activity.

The use of sulfidogenic bioreactors is a biotechnology trend to recover valuable metals such as copper and zinc as sulfide biominerals from mine-impacted waters. In the present work, ZnS nanoparticles were produced using "green" H2S gas generated by a sulfidogenic bioreactor. ZnS nanoparticles were physico-chemically characterized by UV-vis and fluorescence spectroscopy, TEM, XRD and XPS. The experimental results showed spherical-like shape nanoparticles with principal zinc-blende crystalline structure, a semiconductor character with an optical band gap around 3.73 eV, and fluorescence emission in the UV-visible range. In addition, the photocatalytic activity on the degradation of organic dyes in water, as well as bactericidal properties against several bacterial strains, were studied. ZnS nanoparticles were able to degrade methylene blue and rhodamine in water under UV radiation, and also showed high antibacterial activity against different bacterial strains including Escherichia coli and Staphylococcus aureus. The results open the way to obtain valorous ZnS nanoparticles from the use of dissimilatory reduction of sulfate using a sulfidogenic bioreactor.

Fabrication and characterization of nanostructured porous silicon-silver composite layers by cyclic deposition: dip-coating vs spin-coating.

Composites of nanostructured porous silicon and silver (nPSi-Ag) have attracted great attention due to the wide spectrum of applications in fields such as microelectronics, photonics, photocatalysis and bioengineering, Among the different methods for the fabrication of nanostructured composite materials, dip and spin-coating are simple, versatile, and cost-effective bottom-up technologies to provide functional coatings. In that sense, we aimed at fabricating nPSi-Ag composite layers. Using nPSi layers with pore diameter of 30 nm, two types of thin-film techniques were systematically compared: cyclic dip-coating (CDC) and cyclic spin-coating (CSC). CDC technique formed a mix of granular and flake-like structures of metallic Ag, and CSC method favored the synthesis of flake-like structures with Ag and Ag2O phases. Flakes obtained by CDC and CSC presented a width of 110 nm and 70 nm, respectively. Particles also showed a nanostructure surface with features around 25 nm. According to the results of EDX and RBS, integration of Ag into nPSi was better achieved using the CDC technique. SERS peaks related to chitosan adsorbed on Ag nanostructures were enhanced, especially in the nPSi-Ag composite layers fabricated by CSC compared to CDC, which was confirmed by FTDT simulations. These results show that CDC and CSC produce different nPSi-Ag composite layers for potential applications in bioengineering and photonics.

Obtaining Nanoparticles of Chilean Natural Zeolite and its Ion Exchange with Copper Salt (Cu2+) for Antibacterial Applications.

This article describes the production of nanoparticles of Chilean natural zeolite, using three size reduction methods: Ball mill, microgrinding, and microfluidization. Morphological characterization of samples indicated an average diameter of 37.2 ± 15.8 nm of the zeolite particles. The size reduction and chemical treatments did not affect the morphology or integrity of the zeolite. An increase of the zeolite samples' Si/Al ratio was observed after the acid treatment and was confirmed by SEM-EDX analysis. Moreover, the effectiveness of the copper salt ion exchange (Cu2+) to the zeolite nanoparticles was analyzed by SEM-EDX. XRD analysis indicated that clinoptilolite and mordenite are the main phases of Chilean natural zeolite, and the crystalline structure was not affected by the modification processes. The FTIR characterization showed the presence of chemical bonds of copper with the zeolite nanoparticle framework. The ion-exchanged zeolite nanoparticles were evaluated for antibacterial behavior by the disc diffusion method. Additionally, the minimum inhibitory concentration and minimum bactericidal concentration were obtained. Microbiological assays with copper-exchanged nanozeolites showed an antimicrobial activity with a bactericidal effect against Escherichia coli and Staphylococcus aureus, which are the primary pathogens of food and are also resistant to multiple drugs. In this study, a new application for natural nanozeolites is demonstrated, as the incorporated copper ions (Cu2+) in nanozeolites registered a productive antibacterial activity.

Assessing the effectiveness of green synthetized silver nanoparticles with Cryptocarya alba extracts for remotion of the organic pollutant methylene blue dye.

In the present work, silver nanoparticles (AgNPs) synthetized with Cryptocarya alba (Peumo) leaf extract were studied. The fabrication method was fast, low cost, and eco-friendly, and the final properties of AgNPs were determined by experimental parameters, such as AgNO3 and Peumo extract concentrations used. Setting suitable experimental conditions, crystalline AgNPs with apparent spherical forms and average diameter around 3.5 nm were obtained. In addition, the capability of synthesized Peumo-AgNPs to remove methylene blue dye (MB) in aqueous solution as well as their catalytic effectiveness was also investigated. The results showed that green synthesized AgNPs can remove fast and effectively the MB dye from aqueous medium by itself, but better results were found acting like catalyst by using sodium borohydride (NaBH4) in the reaction. In addition, this green nanomaterial can be recycling several times maintaining initial properties for removal of MB. Thus, AgNPs synthetized with Peumo leaf extracts could be an excellent catalyst candidate for degradation of blue methylene dye in chemical industries.

Dispersion of the Photosensitizer 5,10,15,20-Tetrakis(4-Sulfonatophenyl)-porphyrin by the Amphiphilic Polymer Poly(vinylpirrolidone) in Highly Porous Solid Materials Designed for Photodynamic Therapy.

The ability of the amphiphilic and biocompatible poly(vinylpyrrolidone) to avoid self-aggregation of the photosensitizer 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin in aqueous solution in the presence of the biocompatible polycation chitosan, polymer that induces the dye self-aggregation, is shown. This is related to the tendency of the dye to undergo preferential solvation by the amphiphilic polymer. Importantly, the dispersant ability of this polymer is transferred to the solid state. Thus, aerogels made of the biocompatible polymers chitosan and chondroitin sulfate, and containing the photosensitizer dispersed by the amphiphilic polymer have been synthesized. Production of reactive oxygen species by the aerogel containing the amphiphilic polymer was faster than when the polymer was absent, correlating with the relative concentration of dyes dispersed as monomers. The aerogels presented here constitute low cost biocompatible materials bearing a conventional photosensitizer for photodynamic therapy, easy to produce, store, transport, and manage in clinical practice.

Photochromic Solid Materials Based on Poly(decylviologen) Complexed with Alginate and Poly(sodium 4-styrenesulfonate).

Photochromic solid materials based on the cationic polymer poly(decylviologen) are reported. The solids were obtained by freeze-drying colloidal suspensions of nanocomplexes obtained by mixing aqueous solutions of the polycation with different solutions of polyanions such as poly(sodium 4-styrenesulfonate) or sodium alginate, at a cationic/anionic polymeric charge ratio of 0.7. The photochromic responses of the solid materials fabricated with alginate as complementary charged polyelectrolyte of the cationic polyviologen are faster than those of the solid materials fabricated with poly(sodium 4-styrenesulfonate), achieving coloration kinetics in the order of minutes, and discoloration kinetics in the order of hours for the former. Aromatic-aromatic interactions between the latter polyanion and the polyviologen may stabilize the dicationic form of the viologen derivative, increasing the necessary energy to undergo photoreduction, thus decreasing the reduction kinetics.

Fossils as candidate material for orthopedic applications.

Ceramic powders from fossil deposits were thoroughly characterized from the material point of view and sintered to produce massive components. The raw material, a mixture of apatite minerals, feldspars, and quartz, seems ideally suitable to obtain a biologically compatible glass ceramic. Preliminary in vitro tests of proliferation and adhesion of MG63 human osteoblast-like cell line on a selected sample are encouraging. Results are correlated with sintering conditions and phase composition: the fossil can be sintered to almost full density at temperatures as low as 900 °C and seems to quickly promote cell activation with respect to hydroxylapatite.