RESUMO
Personal glucose meters (PGMs) have been used for the measurement of blood glucose for decades now such that they have become the most used analytical method in the world. They are also well placed to be repurposed for point-of-care testing of other analytes as they are inexpensive, portable and quantitative. Efforts to repurpose PGMs for the detection of any analyte at the point-of-care have been one focus of biosensor research for several years now with a number of successful efforts in the detection of a wide range of analytes. This article reviews the published methods to repurpose a PGM to detect analytes other than glucose, and analyses the potential and the challenges to be overcome in developing a PGM-based biosensor and bring it to market.
Assuntos
Técnicas Biossensoriais/instrumentação , Automonitorização da Glicemia/instrumentação , Glicemia/análise , Sistemas Automatizados de Assistência Junto ao Leito , Animais , Técnicas Biossensoriais/métodos , Automonitorização da Glicemia/métodos , HumanosRESUMO
RATIONALE: The decolouration of brilliant blue FCF by the action of titanium dioxide (TiO2 ) under ultraviolet (UV) exposure has been recently reported as the basis of a paper-based sensor for monitoring UV sun exposure. The mechanism of brilliant blue FCF photodegradation in the presence of the photocatalyst and the resulting photoproducts are thus far unknown. METHODS: The UV-initiated photodegradation of brilliant blue FCF in the presence of TiO2 for both the aqueous and the solid state was investigated. Degradation in the solid state was observed using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-MS). Decomposition of the dye in the aqueous state was analyzed using liquid chromatography/mass spectrometry (LC/MS) and ultraviolet-visible (UV-Vis) spectroscopy. RESULTS: After UV radiation exposure, the brilliant blue FCF base peak [M1 + NH4 ]+ (m/z calc. 766.194 found 766.194) decreased in the LC/MS chromatogram with a concomitant appearance of BB-FCF decomposition products involving the sequential loss of the N-ethyl and N-methylbenzene sulfonate (MBSA) groups, assigned as [M2 + H]+ (-MBSA, calc. 579.163 found 579.162), [M3 + H]+ (-MBSA, -Et, calc. 551.131 found 551.131), [M4 + H]+ (-2MBSA, calc. 409.158 found 409.158), [M5 + H]+ (-2MBSA, -Et, calc. 381.127 found 381.127). Ions [M2 + H]+ and [M3 + H]+ were also identified in the photodegradation products using MALDI-MS. Observation by UV-Vis indicated a decrease in the solution absorbance maxima and an associated blue-shift upon UV exposure in solution. CONCLUSIONS: The LC/MS analysis indicated two main oxidation processes. The most obvious was attack of the N-methylene, eliminating either ethyl or MBSA groups. The presence of the hydroxylated decomposition product M13 ([M13 + H]+ , calc. 595.157 found 595.157) supported this assignment. In addition, the detection of photoproduct M8, proposed to be 3-((ethylamino)methyl)benzenesulfonic acid ([M8 + H]+ , calc. 216.069 found 216.069), indicates an aryl-oxidative elimination. The absence of the aryl-hydroxy products normally expected to accompany the formation of M8 is proposed to be due to TiO2 -binding catechol-like derivatives, which are then removed upon filtration.
RESUMO
Acute respiratory tract infections are a major cause of morbidity and mortality and represent a significant burden on the health care system. Laboratory testing is required to definitively distinguish infecting influenza virus from other pathogens, resulting in prolonged emergency department (ED) visits and unnecessary antibiotic use. Recently available rapid point-of-care tests (POCT) may allow for appropriate use of antiviral and antibiotic treatments and decrease patient lengths of stay. We undertook a systematic review to assess the effect of POCT for influenza on three outcomes: (1) antiviral prescription, (2) antibiotic prescription, and (3) patient length of stay in the ED. The databases Medline and Embase were searched using MeSH terms and keywords for influenza, POCT, antivirals, antibiotics, and length of stay. Amongst 245 studies screened, 30 were included. The majority of papers reporting on antiviral prescription found that a positive POCT result significantly increased use of antivirals for influenza compared with negative POCT results and standard supportive care. A positive POCT result also led to decreased antibiotic use. The results of studies assessing the effect of POCT on ED length of stay were not definitive. The studies assessed in this systematic review support the use of POCT for diagnosis of influenza in patients suffering an acute respiratory infection. Diagnosis using POCT may lead to more appropriate prescription of treatments for infectious agents. Further studies are needed to assess the effect of POCT on the length of stay in ED.
Assuntos
Influenza Humana/diagnóstico , Influenza Humana/virologia , Testes Imediatos , Infecções Respiratórias/diagnóstico , Infecções Respiratórias/virologia , Antivirais/uso terapêutico , Prescrições de Medicamentos , Serviços Médicos de Emergência , Serviço Hospitalar de Emergência , Humanos , Vírus da Influenza A/genética , Influenza Humana/tratamento farmacológico , Influenza Humana/epidemiologia , Tempo de Internação , Reação em Cadeia da Polimerase , Infecções Respiratórias/tratamento farmacológico , Infecções Respiratórias/epidemiologiaRESUMO
Despite the importance of protein dimers and dimerization in biology, the formation of protein dimers through synthetic covalent chemistry has not found widespread use. In the case of maleimide-cysteine-based dimerization of proteins, we show here that when the proteins have the same charge, dimerization appears to be inherently difficult with yields around 1% or less, regardless of the nature of the spacer used or whether homo- or heteroprotein dimers are targeted. In contrast, if the proteins have opposing (complementary) charges, the formation of heteroprotein dimers proceeds much more readily, and in the case of one high molecular weight (>80 kDa) synthetic dimer between cytochrome c and bovine serum albumin, a 30% yield of the purified, isolated dimer was achieved. This represents at least a 30-fold increase in yield for protein dimers formed from proteins with complementary charges, compared to when the proteins have the same charge, under otherwise similar conditions. These results illustrate the role of ionic supramolecular interactions in controlling the reactivity of proteins toward bis-functionalized spacers. The strategy here for effective synthetic dimerization of proteins could be very useful for developing novel approaches to study the important role of protein-protein interactions in chemical biology.
Assuntos
Citocromos c/síntese química , Proteínas/síntese química , Albumina Sérica/síntese química , Animais , Fenômenos Bioquímicos , Bovinos , Cisteína/química , Citocromos c/química , Dimerização , Modelos Moleculares , Peso Molecular , Multimerização Proteica , Proteínas/química , Albumina Sérica/química , Eletricidade EstáticaRESUMO
We describe here the synthesis of azide-functionalised iridium(III) bisterpyridines using the "chemistry on the complex" strategy. The resulting azide-complexes are then used in the copper(I)-catalysed azide-alkyne Huisgen 1,3-dipolar cycloaddition "click chemistry" reaction to from the corresponding triazole-functionalised iridium(III) bisterpyridines. The photophysical characteristics, including lifetimes, of these compounds were also investigated. Interestingly, oxygen appears to have very little effect on the lifetime of these complexes in aqueous solutions. Unexpectedly, sodium ascorbate acid appears to quench the luminescence of triazole-functionalised iridium(III) bisterpyridines, but this effect can be reversed by the addition of copper(II) sulfate, which is known to oxidize ascorbate under aerobic conditions. The results demonstrate that iridium(III) bisterpyridines can be functionalized for use in "click chemistry" facilitating the use of these photophysically interesting complexes in the modification of polymers or surfaces, to highlight just two possible applications.
Assuntos
Azidas/síntese química , Irídio/química , Triazóis/síntese química , Azidas/química , Catálise , Química Click , Cobre/química , Luminescência , Estrutura Molecular , Polímeros/química , Triazóis/químicaRESUMO
Poly(ethylene glycol) (PEG) is one of the most extensively studied antifouling coatings due to its ability to reduce protein adsorption and improve biocompatibility. Although the use of PEG for antifouling coatings is well established, the stability and density of PEG layers are often inadequate to provide optimum antifouling properties. To improve on these shortcomings, we employed the stepwise construction of PEG layers onto a silicon surface. Acetylene-terminated alkyl monolayers were attached to nonoxidized crystalline silicon surfaces via a one-step hydrosilylation procedure with 1,8-nonadiyne. The acetylene-terminated surfaces were functionalized via a copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction of the surface-bound alkynes with an azide to produce an amine terminated layer. The amine terminated layer was then further conjugated with PEG to produce an antifouling surface. The antifouling surface properties were investigated by testing adsorption of human serum albumin (HSA) and lysozyme (Lys) onto PEG layers from phosphate buffer solutions. Detailed characterization of protein fouling was carried out with X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) combined with principal component analysis (PCA). The results revealed no fouling of albumin onto PEG coatings whereas the smaller protein lysozyme adsorbed to a very low extent.
Assuntos
Muramidase/química , Polietilenoglicóis/química , Soroalbumina Bovina/química , Silício/química , Adsorção , Alcinos/química , Azidas/química , Química Click , Reação de Cicloadição , Espectroscopia Fotoeletrônica , Análise de Componente Principal , Propriedades de SuperfícieRESUMO
Organic coatings on electrodes that limit biofouling by proteins but are of sufficiently low impedance to still allow Faradaic electrochemistry to proceed at the underlying electrode are described for the first time. These organic coatings formed using simple aryl diazonium salts present a zwitterionic surface and exhibit good electrochemical stability. The layers represent a low impedance alternative to the oligo (ethylene glycol) (OEG)-based anti-biofouling coatings and are expected to find applications in electrochemical biosensors and implantable electrodes. Two different zwitterionic layers grafted to glassy carbon surfaces are presented and compared to a number of better-known surfaces, including OEG-based phenyl-layer-grafted glassy carbon surfaces and OEG alkanethiol SAMs coated on gold, to allow the performance of these new layers to be compared to the body of work on other anti-biofouling surfaces. The results suggest that phenyl-based zwitterionic coatings are as effective as the OEG SAMs at resisting the nonspecific adsorption of bovine serum albumin and cytochrome c, as representative anionic and cationic proteins at physiological pH, whereas the impedance of the zwitterionic phenyl layers are two orders of magnitude lower than OEG SAMs.
Assuntos
Incrustação Biológica/prevenção & controle , Técnicas Biossensoriais/métodos , Eletrodos , Soroalbumina Bovina/química , Adsorção , Animais , Técnicas Biossensoriais/instrumentação , Carbono/química , Bovinos , Materiais Revestidos Biocompatíveis/química , Eletrônica Médica/métodos , Etilenoglicol/química , Ouro/química , Microscopia de Fluorescência , Modelos Químicos , Fosforilcolina/química , Proteínas/química , Compostos de Sulfidrila/químicaRESUMO
Physical and electrochemical properties of gold nanoparticle-based electrodes are highlighted. Polycrystalline gold electrodes are passivated by a self-assembled monolayer, then the immobilization of gold nanoparticles "switch on" the electrochemical reactivity of ruthenium. Herein, gap-mode Raman studies show that the location of the nanoparticles is on the top of the monolayer, meaning that the "switching on" cannot be attributed to a direct electrical contact between nanoparticles and the gold support. This "switching on" feature is also not affected by the size of the gold nanoparticles with a range of diameters between 4 and 67 nm. Further, the charge of the nanoparticles is investigated by grafting chemical groups onto the nanoparticles which is observed to alter the electron-transfer kinetics. The variation in rate constant however is insufficient to attribute the "switching on" phenomenon to a possible adsorption of the redox species onto the nanoparticles.
Assuntos
Ouro/química , Nanopartículas Metálicas/química , Adsorção , Eletroquímica , Eletrodos , Cinética , Oxirredução , Tamanho da Partícula , Análise Espectral Raman , Propriedades de SuperfícieRESUMO
Photo-active bis(terpyridine)ruthenium(ii) chromophores were synthesised and attached to the redox enzyme iso-1 cytochrome c in a mixed solvent system to form photo-induced bioconjugates in greater than 40% yield after purification. The effects of up to 20% (v/v) of acetonitrile, tetrahydrofuran, dimethylformamide, or dimethyl sulfoxide at 4, 25 and 35 degrees C on the stability and biological activity of cytochrome c and its reactivity towards the model compound 4,4'-dithiodipyridine (DTDP) was measured. The second-order rate constant for the DTDP reaction was found to range between k = 2.5-4.3 M(-1) s(-1) for reactions with 5% organic solvent added compared to k = 5.6 M(-1) s(-1) in pure water at 25 degrees C. Use of 20% solvent generally results in significant protein oxidation, and 20% acetonitrile and tetrahydrofuran in particular result in significant protein dimerization, which competes with the bioconjugation reaction. Cyclic voltammetry studies indicated that the rate of electron transfer to the heme in solution was reduced in the bis(terpyridine)ruthenium(ii) cytochrome c bioconjugates compared to unmodified cytochrome c. Steady-state fluorescence studies on these bioconjugates showed that energy or electron transfer is taking place between the bis(terpyridine)ruthenium(ii) chromophores and cytochrome c. The bis(terpyridine)ruthenium(ii) cytochrome c bioconjugates demonstrate room temperature photo-activated electron transfer from the bis(terpyridine)ruthenium(ii) donor to the protein acceptor. Two sacrificial donors were used; in 50% glycerol, the bioconjugates were reduced in about 15 min while in 20 mM EDTA the bioconjugates were fully reduced in less than 5 min upon irradiation with a xenon lamp source. Under these conditions, the reduction of the non-covalent mixture of cytochrome c and bis(terpyridine)ruthenium(ii) mixtures took over 30 min. Control experiments showed that the photo-induced reduction of cytochrome c only occurs in the absence of oxygen and presence of a sacrificial donor. These results are encouraging for future incorporation of these bioconjugates in light-responsive bioelectronic circuits, including photo-activated biosensors and biofuel cells.
Assuntos
Citocromos c/química , Compostos Organometálicos/química , Proteínas de Saccharomyces cerevisiae/química , Proteínas de Saccharomyces cerevisiae/metabolismo , Saccharomyces cerevisiae/metabolismo , Citocromos c/metabolismo , Transporte de Elétrons , Ativação Enzimática , Modelos Moleculares , Compostos Organometálicos/metabolismo , Oxirredução , Fotoquímica , Conformação Proteica , Solventes , TemperaturaRESUMO
Ruthenium(II)bisterpyridine chromophores were covalently linked to iso-1 cytochrome c from yeast to create light-activated donor-acceptor bioconjugates.