RESUMO
In the present paper, the effects of metal promoters (M = Fe, Co, and Cu) in Pt/M x Zr y O z catalysts and the influence of CO2 and H2O on the CO oxidation activity (PROX) were investigated. To do that, characterizations of catalyst structures and surfaces were performed and reported here. The catalyst Pt/Fe x Zr y O z (PFeZ) was the most active at low temperatures among the analyzed ones. The addition of platinum caused strong interaction with the mixed oxide, affecting the structure and the surface composition, blocking basic sites, and thus preventing catalyst deactivation. Particularly, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) results evidenced the formation of carboxylate and carbonate species. Besides, the addition of CO2 and H2O in the gas feed stream affected the observed CO oxidation results, showing that CO2 competes with O2 on metallic sites. Moreover, DRIFTS and temperature-programmed desorption (TPD) analyses suggested the occurrence of OH- oxidation by CO, leading to the formation of highly reactive compounds that can be easily oxidized.
RESUMO
We describe a strategy for the development of a rational approach of neoplastic disease therapy based on the demonstration that scale-free networks are susceptible to specific attacks directed against its connective hubs. This strategy involves the (i) selection of up-regulated hubs of connectivity in the tumors interactome, (ii) drug repurposing of these hubs, (iii) RNA silencing of non-druggable hubs, (iv) in vitro hub validation, (v) tumor-on-a-chip, (vi) in vivo validation, and (vii) clinical trial. Hubs are protein targets that are assessed as targets for rational therapy of cancer in the context of personalized oncology. We confirmed the existence of a negative correlation between malignant cell aggressivity and the target number needed for specific drugs or RNA interference (RNAi) to maximize the benefit to the patient's overall survival. Interestingly, we found that some additional proteins not generally targeted by drug treatments might justify the addition of inhibitors designed against them in order to improve therapeutic outcomes. However, many proteins are not druggable, or the available pharmacopeia for these targets is limited, which justifies a therapy based on encapsulated RNAi.
Assuntos
Neoplasias , Mapeamento de Interação de Proteínas , Humanos , Neoplasias/tratamento farmacológico , Neoplasias/genéticaRESUMO
In this study, we investigated the microencapsulation of two strains of the entomopathogenic bacteria Bacillus thuringiensis (B. thuringiensis) (BtMA-750 and BtMA-1114), which are biopesticides of high toxicity for the mosquito vector Aedes aegypti. The encapsulation of different concentrations of microorganisms in starch microparticles was evaluated, and the inverse suspension polymerization technique was explored. It was possible to observe that the higher amounts of the biopesticide caused a slight decrease in the diameter of the particles; however, even when encapsulated, the biopesticide still presents an average diameter that is able to be consumed by the larvae of Aedes aegypti. Furthermore, it was noticed that the presence of both of the B. thuringiensis strains did not affect the thermal stability of the particles. The microencapsulated bacterial strains presented a high number of viable spores and preserved the expression of proteins with molecular masses corresponding to the insecticidal toxins Cry and Cyt, indicating that the encapsulation process was conducted satisfactorily. Finally, the encapsulated strains were tested against Ae. aegypti larvae and maintained 100% larval mortality even after 35 days. Therefore, microencapsulation of B. thuringiensis not only guarantees the bacterial activity, but also prolongs the action of the biopesticide. Collectively, such findings highlight the great potential of the new biopesticides, which may help to reduce the population indices of the mosquito vector Ae. aegypti via a sustainable and environment-friendly route.
Assuntos
Aedes , Bacillus thuringiensis , Animais , Agentes de Controle Biológico , Mosquitos Vetores , Proteínas de Bactérias , Larva/microbiologiaRESUMO
Approximately 1 billion people are affected by neglected diseases around the world. Among these diseases, schistosomiasis constitutes one of the most important public health problems, being caused by Schistosoma mansoni and treated through the oral administration of praziquantel (PZQ). Despite being a common disease in children, the medication is delivered in the form of large, bitter-tasting tablets, which makes it difficult for patients to comply with the treatment. In order to mask the taste of the drug, allow more appropriate doses for children, and enhance the absorption by the body, different polymer matrices based on poly(methyl methacrylate) (PMMA) were developed and used to encapsulate PZQ. Polymer matrices included PMMA nano- and microparticles, PMMA-co-DEAEMA (2-(diethylamino)ethyl methacrylate), and PMMA-co-DMAEMA (2-(dimethylamino)ethyl methacrylate) microparticles. The performances of the drug-loaded particles were characterized in vitro through dissolution tests and in vivo through pharmacokinetic analyses in rats for the first time. The in vitro dissolution studies were carried out in accordance with the Brazilian Pharmacopeia and revealed a good PZQ release profile in an acidic medium for the PMMA-DEAEMA copolymer, reaching values close to 100 % in less than 3 h. The in vivo pharmacokinetic analyses were conducted using free PZQ as the control group that was compared with the investigated matrices. The drug was administered orally at doses of 60 mg/kg, and the PMMA-co-DEAEMA copolymer microparticles were found to be the most efficient release system among the investigated ones, reaching a Cmax value of 1007 ± 83 ng/mL, even higher than that observed for free PZQ, which displayed a Cmax value of 432 ± 98 ng/mL.
RESUMO
Nanotechnology has the potential to improve the combat against life-threatening conditions. Considering the COVID-19 scenario, and future outbreaks, nanotechnology can play a pivotal role in several steps, ranging from disinfection protocols, manufacture of hospital clothes, to implementation of healthcare settings. Polymeric nanoparticles are colloidal particles with size ranging from 10 to 999 nm, composed of natural or synthetic polymers. The versatility of polymeric-based nanoparticle engineering can provide (i) specificity, (ii) tunable release kinetics, and (iii) multimodal drug composition, making it possible to overcome common limitations encountered during traditional drug development. Consequently, these particles have been widely used as drug delivery systems against several diseases, such as cancer. Due to inherent competitive advantages, polymeric-based nanoparticles hold astonishing potential to counteract the new coronavirus disease (COVID-19). For this reason, in the present study, the latest advancements in polymer-based nanotechnology approaches used to fight against SARS-CoV-2 are compiled and discussed. Moreover, the importance of forefront in vitro technologies - such as 3D bioprinting and organ-on-chip - to evaluate the efficacy of nanotherapeutic agents is also highlighted. Polymeric nanoparticles can be functionalized to enhance its potential as a nanotherapeutic agent. Due to its many advantages, polymeric-based nanoparticles systems are a promising approach against coronavirus disease 2019 (COVID-19).
RESUMO
A suitable immobilized lipase for esters syntheses should be selected considering not only its cost. We evaluated five biocatalysts in syntheses of octyl caprylate, octyl caprate, and octyl laurate, in which conversions higher than 90% were achieved. Novozym®ï»¿ 435 and non-commercial preparations (including a dry fermented solid) were selected for short-term octyl laurate syntheses using different biocatalysts loadings. By increasing the biocatalyst's loading the lipase's reusability also raised, but without strict proportionality, which resulted in a convergence between the lowest biocatalyst loading and the lowest cost per batch. The use of a dry fermented solid was cost-effective, even using loadings as high as 20.0% wt/wt due to its low obtaining cost, although exhibiting low productiveness. The combination of biocatalyst's cost, esterification activity, stability, and reusability represents proper criteria for the choice. This kind of assessment may help to establish quantitative goals to improve or to develop new biocatalysts.
Assuntos
Enzimas Imobilizadas/metabolismo , Lipase/metabolismo , Ésteres/metabolismoRESUMO
Abstract The present work reports the implementation of the Hazard Analysis Critical Control Point (HACCP) methodology to analyze the water purification system of a pharmaceutical site, in order to assure the system quality and prevent failures. As a matter of fact, the use of HACCP for development and implementation of Quality Risk Management (QRM) is not usual in pharmaceutical plants and it is applied here to improve the performance of the water purification system of a polymerization pilot plant used to manufacture pharmaceutical grade polymer microparticles. Critical Control Points (CCP) were determined with the aid of a decision tree and questions were made to characterize whether identified hazards constitute actual CCPs and should be monitored. When deviations were detected, corrective actions were performed and action plans were used for following-up and implementation of corrective actions. Finally, microbiological and physicochemical parameters were analyzed and the obtained results were regarded as appropriate. Therefore, it is shown that HACCP constitutes an effective tool for identification of hazards, establishment of corrective actions and monitoring of the critical control points that impact the process and the quality of the final pharmaceutical product most significantly.
Assuntos
Gestão de Riscos/classificação , Purificação da Água/instrumentação , Análise de Perigos e Pontos Críticos de Controle/métodos , Monitoramento Ambiental/instrumentação , Gestão da Qualidade Total/métodos , Indústria Farmacêutica/classificação , Metodologia como Assunto , Relatório de PesquisaRESUMO
BACKGROUND Obturator hernia is an uncommon (0.07-1% incidence rate) subtype of hernia of the abdominal wall, with its incarceration being a rare cause of bowel obstruction. Obturator hernia has a higher incidence in elderly women and in malnourished people. This type of hernia has the highest morbidity and mortality rates of all abdominal wall hernias. This article reports a case of an emaciated 93-year-old woman who presented with small bowel obstruction due to incarcerated obturator hernia, successfully managed surgically with a modified mesh-plug hernioplasty. CASE REPORT An emaciated 93-year-old woman presented with diffuse abdominal pain, more intense on the right iliac fossa, radiating to the right thigh, with 8-h evolution and associated with dark-colored vomiting but normal bowel transit. This patient had a surgical history of right Richter´s femoral hernia, strangulated, with previous intestinal resection and a right femoral hernioplasty. A computed tomography (CT) scan revealed an incarcerated obturator hernia on the right side containing a short segment of small intestine. The patient underwent an exploratory laparotomy and a mesh-plug hernioplasty. During follow-up, there was no evidence of recurrence or complications. CONCLUSIONS Obturator hernia diagnosis is challenging due to its rarity and its signs and symptoms being often unspecific. CT scan has the highest sensitivity and is the best diagnostic tool. Surgical management is the only possible treatment for obturator hernia. Awareness of this condition is essential to allow an earlier approach and attempt to mitigate the associated high morbidity and mortality rates.
Assuntos
Parede Abdominal , Hérnia do Obturador , Obstrução Intestinal , Dor Abdominal , Idoso , Idoso de 80 Anos ou mais , Feminino , Hérnia do Obturador/complicações , Hérnia do Obturador/diagnóstico por imagem , Hérnia do Obturador/cirurgia , Herniorrafia , Humanos , Obstrução Intestinal/diagnóstico por imagem , Obstrução Intestinal/etiologia , Obstrução Intestinal/cirurgia , Intestino Delgado/cirurgia , Telas CirúrgicasRESUMO
Von Recklinghausen disease (neurofibromatosis type 1-NFT1) is a genetic disorder with autosomal dominant inheritance pattern, caused by mutation of a tumour suppressor gene. Its main features include multiple cutaneous café-au-lait spots and neurofibromas. It is associated with an increased risk of developing neuroendocrine tumours, for instance, in the duodenum. The authors present a case of a 23-year-old male patient admitted to the emergency department due to persistent vomiting. Imaging and biopsy studies revealed an obstructive and large duodenal neuroendocrine tumour; hence the patient underwent a pancreaticoduodenectomy.
RESUMO
The evaluation of faults in a multipurpose pharmaceutical pilot plant used for production of polymer particles was performed, integrating traditional Fault Tree Analyses (FTA) and Monte Carlo procedures and employing tools of the quality risk management methodology for production of medicines. The plant was divided into four basic processes: (i) receipt and sampling of materials; (ii) treatment of purified water; (iii) reaction; and (iv) lyophilization and purification. For each process, the most critical failure was selected, and the FTA was built. Selection of basic events considered the most important effects on the final quality of the medicine. Then, the FTA was reduced to basic events using Boolean algebra. The quantitative assessment was made by assigning failure rate values for each event. The reliability data of the failure rates were based on the literature that deals with similar processes. The frequencies for each fault were determined through Monte Carlo simulations, considering that fault probability distributions followed the exponential distribution. When failure rate (Ê) data are available, the quality management can establish a prediction of plant behavior over a period. This scenario is consistent and coherent with practices of pharmaceutical sites, since occurrence of high rates of failure must be corrected immediately in order to preserve the safety of the operation.
Assuntos
Indústria Farmacêutica/organização & administração , Método de Monte Carlo , Gestão de Riscos/organização & administração , Projetos Piloto , Controle de QualidadeRESUMO
Bibliometric studies allow to collect, organize and process information that can be used to guide the development of research and innovation and to provide basis for decision-making. Paraffin/olefin separations constitute an important industrial issue because cryogenic separation methods are frequently needed in industrial sites and are very expensive. As a consequence, the use of membrane separation processes has been extensively encouraged and has become an attractive alternative for commercial separation processes, as this may lead to reduction of production costs, equipment size, energy consumption and waste generation. For these reasons, a bibliometric survey of paraffin/olefin membrane separation processes is carried out in the present study in order to evaluate the maturity of the technology for this specific application. Although different studies have proposed the use of distinct alternatives for olefin/paraffin separations, the present work makes clear that consensus has yet to be reached among researchers and technicians regarding the specific membranes and operation conditions that will make these processes scalable for large-scale commercial applications.
RESUMO
Polymerization through reversible addition-fragmentation chain-transfer (RAFT) polymerization has been extensively employed for the production of polymers with controlled molar mass, complex architectures and copolymer composition distributions intended for biomedical and pharmaceutical applications. In the present work, RAFT miniemulsion copolymerizations of methyl methacrylate with acrylic acid and methacrylic acid were conducted to prepare hydrophilic polymer nanoparticles and compare cell uptake results after bioconjugation with bovine serum albumin (BSA), used as a model biomolecule. Obtained results indicate that the RAFT agent 2-cyano-propyl-dithiobenzoate allowed for successful free radical controlled methyl methacrylate copolymerizations and performed better when methacrylic acid was used as comonomer. Results also indicate that poly(methyl methacrylate-co-methacrylic acid) nanoparticles prepared by RAFT copolymerization and bioconjugated with BSA were exceptionally well accepted by cells, when compared to the other produced polymer nanoparticles because cellular uptake levels were much higher for particles prepared in presence of methacrylic acid, which can probably be associated to its high hydrophilicity.
RESUMO
This study aimed to synthesize and characterize nanoparticles (NPs) of poly(methyl methacrylate) (PMMA) and evaluate their ability to incorporate plant extracts with antitumor activity and low dissolution in aqueous media. The extract used was n-hexane partition of the methanol extract of Piper cabralanum (PCA-HEX). PMMA NPs were obtained using the mini-emulsion method, which was able to encapsulate almost 100% of PCA-HEX. The synthesized polymeric particles presented with a size of 200 nm and a negative charge. Cytotoxicity tests by MTT and trypan blue assays showed that NPs without PCA-HEX did not kill leukemic cells (K562 cells). NPs containing PCA-HEX were able to enhance cell death when compared to pure extract. The results showed that PMMA NPs could be useful as a drug delivery system as they can enhance the antitumor activity of the PCA-HEX extract by more than 20-fold. PMMA NPs containing plant extracts with antitumor activities may be an alternative to control the evolution of diseases such as leukemia.
Assuntos
Antineoplásicos Fitogênicos/farmacologia , Sistemas de Liberação de Medicamentos/métodos , Emulsões/química , Nanopartículas/química , Piper/química , Extratos Vegetais/farmacologia , Antineoplásicos Fitogênicos/administração & dosagem , Antineoplásicos Fitogênicos/química , Morte Celular/efeitos dos fármacos , Ensaios de Seleção de Medicamentos Antitumorais , Emulsões/administração & dosagem , Hexanos/química , Humanos , Células K562 , Nanopartículas/administração & dosagem , Extratos Vegetais/administração & dosagem , Extratos Vegetais/química , Polimetil Metacrilato/químicaRESUMO
Due to the complex nature of near-infrared (NIR) spectra, it is usually very difficult to provide quantitative interpretations of spectral data. As a consequence, careful building and validation of calibration models are of fundamental importance prior to development of useful applications of NIR technologies. For this reason, this work presents a statistical study about the NIR spectroscopy, analyzing the NIR behavior when the experimental conditions are changed. Near-infrared spectra were measured at different temperatures and stirring velocities for systems containing a pure solvent and a suspension of polymer powder in order to perform the error analysis. Then, mixtures of xylene and toluene were analyzed through NIR at different temperatures and stirring velocities and the obtained data were used to build calibration models with multivariate techniques. The results showed that the precision of the NIR measurements depends on the analytical conditions and that unavoidable fluctuations of spectral data (or spectral data variability) are strongly correlated, leading to full covariance matrices of spectral fluctuations, which has been surprisingly neglected during quantitative analyses. In particular, modeling of the xylene/toluene NIR data performed with different multivariate techniques revealed that the principal directions are not preserved when the real covariance matrix of measurement errors is taken into account.
RESUMO
Praziquantel (PZQ) is the drug recommended by the World Health Organization for treatment of schistosomiasis. However, the treatment of children with PZQ tablets is complicated due to difficulties to adapt the dose and the extremely bitter taste of PZQ. For this reason, poly (methyl methacrylate) nanoparticles loaded with Praziquantel (PZQ-NP) were developed for preparation of a new formulation to be used in the suspension form. For this reason, the main aim of the present study was to evaluate the pharmacokinetic (PK) profile of PZQ-NP, through HPLC-MS/MS assays. Analyses were performed with an Omnisphere C18 column (5.0 µm×4.6 mm×150.0 mm), using a mixture of an aqueous solution containing 0.1 wt% of formic acid and methanol (15:85-v/v) as the mobile phase at a flow rate of 0.800mL/min. Detection was performed with a hybrid linear ion-trap triple quadrupole mass spectrometer with multiple reactions monitoring in positive ion mode via electrospray ionization. The monitored transitions were m/z 313.18>203.10 for PZQ and m/z 285.31>193.00 for the Internal Standard. The method was validated with the quantification limit of 1.00 ng/mL, requiring samples of 25 µL for analyses. Analytic responses were calibrated with known concentration data, leading to correlation coefficients (r) higher than 0.99. Validation performed with rat plasma showed that PZQ was stable for at least 10 months when stored below -70 °C (long-term stability), for at least 17 h when stored at room temperature (RT, 22 °C) (short-term stability), for at least 47 h when stored at room temperature in auto-sampler vials (post-preparative stability) and for at least 8 successive freeze/thaw cycles at -70 °C. For PK assays, Wistar rats, weighing between 200 and 300 g were used. Blood samples were collected from 0 to 24 h after oral administration of single doses of 60 mg/kg of PZQ-NP or raw PZQ (for the control group). PZQ was extracted from plasma by liquid-liquid extraction with terc-butyl methyl ether. The values obtained for maximum concentration (C(max)) and area under curve (AUC) for the PZQ-NP group were about 3 times smaller than the respective values obtained for the control group. However, the time for achieving maximum concentration (T(max)), the elimination constant (Ke) and the half-life time of elimination (T(½ß)) were not statistically different. These results suggest that PZQ absorption is probably the rate-limiting step for obtainment of better PK parameters for PZQ-NP. Thus, further studies are needed to understand both the PZQ-NP absorption mechanisms and the drug diffusion process through the polymer matrix in vivo, in order to improve the PZQ-NP release profile.
Assuntos
Nanopartículas/metabolismo , Polimetil Metacrilato/farmacocinética , Praziquantel/farmacocinética , Espectrometria de Massas em Tandem/métodos , Animais , Cromatografia Líquida de Alta Pressão/métodos , Avaliação Pré-Clínica de Medicamentos/métodos , Feminino , Nanopartículas/análise , Polimetil Metacrilato/análise , Praziquantel/análise , Ratos , Ratos WistarRESUMO
Core-shell polymer particles with different properties were produced through combined suspension-emulsion polymerizations and employed as supports for immobilization of lipase B from Candida antarctica. In order to evaluate how the morphology of the particles affects the immobilization parameters, empirical models were developed to describe the performance of the biocatalysts as a function of the specific area, volume of pores and average pore diameter of the supports. It was observed that the average pore sizes did not affect the enzymatic activities in the analyzed range of pore sizes. It was also observed that the increase of the specific area (and of the volume of pores) led to higher enzyme loadings, also leading to an increase in the esterification activity, as expected. However, when the specific area (and volume of pores) increased, the hydrolytic activity and the retention of hydrolytic activity of the biocatalysts decreased, indicating the existence of diffusional limitations for some hydrolytic reactions, probably because of the high reaction rates.
Assuntos
Enzimas Imobilizadas/química , Proteínas Fúngicas/química , Lipase/química , Biocatálise , Esterificação , Hidrólise , Cinética , Tamanho da Partícula , Polimerização , Poliestirenos/química , PorosidadeRESUMO
Fertilizers contain essential nutrients for agricultural growth and development. However, most nitrogen fertilizers are substances with high solubility of ions and are very susceptible to leaching and volatilization. To minimize these losses, an alternative is the creation of a physical barrier around granules. One way is to coat granules with polymers. In the present work urea granules were coated with polyhydroxybutyrate and ethyl cellulose in various conditions in the presence of emulsifiers. The original granules and the final products were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and thermogravimetry, to evaluate the surface morphology, the interaction between the granules and the coating, and the rates of mass change. The rates of urea release in distilled water were measured with a commercial enzyme kit. It is shown that those polymers are effective for coating of granules, leading to reduction of rates of urea dissolution in water.
Assuntos
Celulose/análogos & derivados , Composição de Medicamentos/métodos , Fertilizantes/análise , Hidroxibutiratos/química , Polímeros/química , Ureia/química , Celulose/química , Cinética , SolubilidadeRESUMO
Separation and cells concentration constitute important stages in most biotechnological processes. Particularly, use of flocculation/sedimentation can improve significantly the extraction of biopolymers accumulated by microorganisms and the biodegradation of xenobiotic compounds by cell sludge. In this work the use of tannin and aluminum sulphate (Al2(SO4)3) as flocculating agents for concentration of cells of Cupriavidus necator DSM 545 is evaluated. Cells were grown in broth nutrient medium in Erlenmeyer flasks, submitted to orbital agitation of 160 rpm at 30 °C for 21 h. The optimal concentrations of flocculating agents, as determined with a standard jar test method, were equal to 2,800 mg/L for tannin and 800 mg/L for Al2(SO4)3, allowing for recovery of 95% of the cells in both cases. Obtained flocs presented density and average diameter of 1.03 g/mL ± 0.01 g/mL and 158 µm ± 19 µm for tannin and of 1.05 g/mL ± 0.01 g/mL and 146 µm ± 14 µm for Al2(SO4)3, respectively. Batch settling tests were performed in order to determine the operational capacity of continuous settlers to be used for separation of the investigated flocculent suspensions. Finally, cultivation of cells using flocs as inoculum indicated that the cells remained viable after flocculation with usage of the optimum flocculating agent concentrations.
RESUMO
OBJETIVO: Avaliar as características e os efeitos de um agente embólico, disponível comercialmente, consistindo de Polivinil Alcool (PVA) de morfologia flocular, e comparar com um agente esférico, de tecnologia nacional, consistindo de Polivinil Alcool e Polivinil Acetato (PVA + PVAc). MÉTODO: Foram utilizadas fêmeas de coelho albino "New Zealand", submetidas à embolização arterial renal. PVA-flocular foi usado em 24 animais, assim como PVA+PVAc-esférico. Seis animais foram utilizados como controle. Todos foram mantidos em cativeiro até a morte, por períodos pós-operatórios de 48 horas, cinco dias, 10 dias e 30 dias. RESULTADOS: Ambos os agentes promoveram oclusão do vaso e infarto do órgão. O estudo microscópico inicial das artérias embolizadas com PVA-flocular, mostra oclusão com trombo e PVA. Os vasos embolizados com PVA+PVAc-esférico, mostram os agentes ocupando praticamente todo o lúmen. No estudo de 30 dias, observa-se absorção do trombo e retração dos agentes de PVAflocular, criando espaços. E com PVA+PVAc-esférico, pode-se observar os agentes circundados por intensa fibrose. CONCLUSÕES: Ambas as partículas foram efetivas para causar isquemia tecidual. A reação inflamatória foi mais intensa com PVA+PVAc-esférico que também apresentou grau de penetração maior no sistema vascular.
BACKGROUND: To evaluate the characteristics and the effects of an embolic agent, available commercially, consisting of irregular - Polyvinyl Alcohol (PVA), and to compare with a spherical agent, of brazilian technology, consisting of Polyvinyl Alcohol and Polyvinyl Acetate (PVA + PVAc). METHODS: Renal arterial embolization was performed in females of New Zealand White rabbits. Irregular - PVA was used in 24 animals. Spherical - PVA+PVAc was used in 24 animals. Six animals were used as control. All animals were maintained in captivity until the euthanasia, after 48 hours, 5 days, 10 days and 30 days. RESULTS: Both agents resulted in vessel occlusion and organ infarction. The initial macroscopic study of the arteries embolized with irregular-PVA, the occluding plug consisted of thrombus and PVA. In vessels embolized with spherical-PVA+PVAc, the occluding plug consisted mostly of the embolic agent. After 30 days, there is absorption of the thrombus and retraction of the agents of PVA-irregular, creating spaces. With spherical-PVA+PVAc, it can be observed the agents surrounded by intense fibrosis. CONCLUSION: Both particles were effective to cause tissue ischemia. The inflammatory reaction was more intense with spherical-PVA+PVAc, besides presenting larger degree of penetration in the vascular system.