Osteoblast cell membrane hybrid bilayers for studying cell-cell interactions.

Osteoblast-like cells were grown on a surface that presents cell membrane components to the cells in culture. The culture surface was a bimolecular layer formed by the interaction of osteoblast plasma membrane vesicles with an alkanethiol monolayer. The potential of these osteoblast-membrane hybrid bilayers for promoting osteoblast adhesion, growth and differentiation was examined. UMR-106 osteoblast-like cells cultured on these surfaces are normal in appearance, and in the presence of serum, proliferate as well or better than on control surfaces. The level of alkaline phosphatase production in the presence and absence of serum suggests that the osteoblast-like cells retain their differentiated phenotype, and appear to respond to the cell surface ligands presented by the osteoblast-membrane biomimetic surface. These observations suggest that biomimetic membrane films prepared from osteoblast cell membranes support osteoblast cell growth, allow the cells to maintain their differentiation state and may be suitable as a model system to probe cell-cell interactions.

Effects of an industrial effluent on plant colonization and on the germination and post-germinative growth of seeds of terrestrial and aquatic plant species.

Major oil sands industrial companies are located in the Athabasca Oil Sands Deposit in northeastern Alberta, Canada. During the process used to extract light crude oil (via hot water digestion and flotation), gypsum is usually added to produce consolidated tails (CT) and CT release water. The vast volumes of process-treated waters (effluent) are held within large dyked tailings ponds. Toward testing viable options for reclamation, various hummock-wetlands systems have been constructed; in addition, natural wetlands (inhabited by obligate wetland plant species) have become established as a result of seeping of the effluents held within the large dyked ponds. Vegetation surveys conducted on and around the industrial site revealed that the constructed wetlands associated with the dyke drainage (effluent treated with phosphorous) and consolidated tails (CT; effluent treated with gypsum) had low biodiversity and were not invaded by many aquatic plants. Although the natural wetland was also not invaded by many aquatic species, it was found to be as diverse as the reference wetlands (i.e. off-site wetlands not exposed to the effluents). Exposure to oil sands effluents had an inhibitory effect on the germination (percent and/or rate) of several plant species (tomato, clover, wheat, rye, pea, reed canary grass, loblolly pine); clover and tomato seed germination were most affected. Two treatments in particular (effluents from the natural on-site wetland and the CT constructed wetland), delayed germination, and also led to reduced fresh weight of seedlings of tomato, wheat, clover and loblolly pine. The osmolarities of the effluents associated with the natural on-site wetland and CT constructed wetland were 712 and 728 mOs/kg, respectively; substituting these effluents with solutions of polyethylene glycol of the same osmotic potentials had a greater inhibitory effect on germination rate. The negative effects of the effluents on seed germination may account for the paucity of aquatic species that invaded the oil sands impacted wetlands. This factor will also be critical in determining the long-term feasibility of hummock-wetland systems.

Effects of oil sands effluent on cattail and clover: photosynthesis and the level of stress proteins.

The oil sands industry located in northeastern Alberta, Canada, generates large volumes of effluent characterized by a high level of dissolved ions and naphthenic acids. The dikes used to store the effluent seep, creating wetlands which are subsequently invaded by obligate wetland flora such as cattail (Typha latifolia L.). The appearance of these wetlands prompted the oil sands industry to consider wetlands as part of their reclamation strategy. However, to ensure long-term viability of such wetlands, the response of the flora to the industrial effluent needed to be determined. To this end, apparent photosynthesis (APS), the level of ribulose-1,5-bisphosphate carboxylase (RuBisCo) large subunit, dehydrin-related polypeptides, and protein disulphide isomerase (PDI) were evaluated in cattail and alsike clover plants (Trifolium hybridum L.) exposed to the oil sands effluent. APS measured in plants impacted by oil sands effluent was significantly higher than that of plants in the non-impacted off-site location. Among the on-site locations, plants growing in the natural wetlands site had higher APS compared to all other sites. The level of RuBisCo was not increased in cattail or clover growing in effluent-contaminated sites indicating that enhanced photosynthesis was not due to greater levels of this enzyme. Dehydrin-related polypeptides were detected only in the roots of cattail and were absent in clover. The polypeptide profile was altered in cattail exposed to oil sands effluent indicating that they were responding to an osmotic stress. The level of PDI was unaffected in the leaves of cattail regardless of the nature of the effluent to which they were exposed. Overall, the data indicate that cattail and clover are adapted to the oil sands effluent, although further studies are needed to assess their long-term ability to survive in the presence of this anthropogenic stress.

First-principles determination of hybrid bilayer membrane structure by phase-sensitive neutron reflectometry.

The application of a new, phase-sensitive neutron reflectometry method to reveal the compositional depth profiles of biomimetic membranes is reported. Determination of the complex reflection amplitude allows the related scattering length density (SLD) profile to be obtained by a first-principles inversion without the need for fitting or adjustable parameters. The SLD profile so obtained is unique for most membranes and can therefore be directly compared with the SLD profile corresponding to the chemical compositional profile of the film, as predicted, for example, by a molecular dynamics simulation. Knowledge of the real part of the reflection amplitude, in addition to enabling the inversion, makes it possible to assign a spatial resolution to the profile for a given range of wavevector transfer over which the reflectivity data are collected. Furthermore, the imaginary part of the reflection amplitude can be used as a sensitive diagnostic tool for recognizing the existence of certain in-plane inhomogeneities in the sample. Measurements demonstrating the practical realization of this phase-sensitive technique were performed on a hybrid bilayer membrane (self-assembled monolayer of thiahexa (ethylene oxide) alkane on gold and a phospholipid layer) in intimate contact with an aqueous reservoir. Analysis of the experimental results shows that accurate compositional depth profiles can now be obtained with a spatial resolution in the subnanometer range, primarily limited by the background originating from the reservoir and the roughness of the film's supporting substrate.

Hybrid bilayer membranes in air and water: infrared spectroscopy and neutron reflectivity studies.

In this report we describe the fabrication and characterization of a phospholipid/alkanethiol hybrid bilayer membrane in air. The bilayer is formed by the interaction of phospholipid with the hydrophobic surface of a self-assembled alkanethiol monolayer on gold. We have characterized the resulting hybrid bilayer membrane in air using atomic force microscopy, spectroscopic ellipsometry, and reflection-absorption infrared spectroscopy. These analyses indicate that the phospholipid added is one monolayer thick, is continuous, and exhibits molecular order which is similar to that observed for phospholipid/phospholipid model membranes. The hybrid bilayer prepared in air has also been re-introduced to water and characterized using neutron reflectivity and impedance spectroscopy. Impedance data indicate that when moved from air to water, hybrid bilayers exhibit a dielectric constant and thickness that is essentially equivalent to hybrid bilayers prepared in situ by adding phospholipid vesicles to alkanethiol monolayers in water. Neutron scattering from these samples was collected out to a wave vector transfer of 0.25 A(-1), and provided a sensitivity to changes in total layer thickness on the order of 1-2 A. The data confirm that the acyl chain region of the phospholipid layer is consistent with that observed for phospholipid-phospholipid bilayers, but suggest greater hydration of the phospholipid headgroups of HBMs than has been reported in studies of lipid multilayers.

Self assembly driven by hydrophobic interactions at alkanethiol monolayers: mechanisms of formation of hybrid bilayer membranes.

The mechanism for the formation of biomimetic model cell membranes consisting of bilayers composed of alkanethiols and phospholipids was probed with a kinetic study using surface plasmon resonance. The kinetics of formation of a monolayer of phospholipid from vesicles in solution onto a hydrophobic alkanethiol monolayer is described by a model that takes into account the lipid concentration, diffusion, and a surface reorganization rate constant. Monomer phospholipid apparently does not play a direct role in determining the kinetics of bilayer formation. Expressions for the limiting cases of this model describe the behavior of two distinct vesicle concentration conditions. At high concentrations of lipid vesicles the formation of the bilayer appears to be limited by the diffusion of vesicles to the surface; at lower concentrations of vesicles, the rate-limiting step is apparently the surface reorganization of lipid. This kinetic model can also be used to describe the formation of a biomimetic bilayer from an alkanethiol monolayer and cell membranes.

Characterization of biomimetic surfaces formed from cell membranes.

A method for fabricating biomimetic surfaces from intact cell membranes is described. A monolayer of alkanethiol on gold is covered by a second layer derived from the components of erythrocyte membranes either by self-assembly or by Langmuir-Blodgett methods. The resulting asymmetric hybrid layer was characterized by ellipsometry, surface plasmon resonance (SPR), contact angle, capacitance, voltammetry, and electron and atomic force microscopy. The erythrocyte membrane layer was measured to be approximately 30-40 A in thickness. Using SPR, the presence of erythrocyte components on the surface was demonstrated by their selective removal by enzymatic action. The uniform deposition of membranous material on the substrate was shown by electron and atomic force microscopy. Demonstration of acetylcholinesterase (AChase) activity, a membrane-anchored enzyme, on the surface for at least 8 days, suggests that the outer leaflet of the erythrocyte membrane is present in its native form. Cyclic voltammetry demonstrates that enhanced electron transport from a solution redox species accompanies formation of the erythrocyte layer at the surface. This enhanced electron transport is blocked by 4,4'-diisothiocyanate stilbene-2,2'-disulfonic acid, a well known blocker of anion transport, suggesting that an erythrocyte anion transporter protein is incorporated into the surface layer in an active conformation.

Phospholipid/alkanethiol bilayers for cell-surface receptor studies by surface plasmon resonance.

Supported hybrid bilayer membranes (HBM) composed of a monolayer of phospholipid and a monolayer of alkanethiol associated with a thin gold film on glass are useful as model lipid bilayer membranes for studying membrane receptor-ligand and cell-cell binding events by surface plasmon resonance (SPR). Measurements of specific binding of proteins and lipid vesicles to well-defined HBMs have been performed under conditions of continuous flow using a commercial SPR instrument (BIAcore). HBMs are shown to be stable in flow and to block nonspecific adsorption of proteins to the alkanethiol/gold surface. The use of such supported lipid bilayers in flow provides a means of conducting equilibrium and kinetic studies of models of ligand-cell and cell-cell interactions with receptors or ligands in a membrane environment. Compared to the extended dextran polymer layer that is currently used for surface modification of BIAcore "sensor chips," the described HBMs provide a well-defined surface that will permit less ambiguous modeling of these important biological interactions.

Microenzymatic fluorescence assay for serum cholesterol.

An enzymatic assay using fluorometric detection for cholesterol determination in serum is described. Results were compared to a conventional enzymatic colorimetric procedure and to the definitive method, which is based on isotope dilution mass spectrometry. Fluorescence detection enhances sensitivity over current colorimetric methods by approximately two orders of magnitude, and the assay response is linear over three orders of magnitude of cholesterol concentration. The reaction is performed in a single step and can be performed with small sample (1 microliter) and reaction (200 microliters) volumes. The fluorescence intensity is stable after a 30-min sample incubation at room temperature. The sensitivity of this fluorescence assay makes it possible to measure subnanomoles of cholesterol, allowing accurate measurement of total cholesterol in 1 microliter of serum or less. This level of sensitivity will also allow measurement of cholesterol in various isolated lipoprotein fractions.

Supported phospholipid/alkanethiol biomimetic membranes: insulating properties.

A novel model lipid bilayer membrane is prepared by the addition of phospholipid vesicles to alkanethiol monolayers on gold. This supported hybrid bilayer membrane is rugged, easily and reproducibly prepared in the absence of organic solvent, and is stable for very long periods of time. We have characterized the insulating characteristics of this membrane by examining the rate of electron transfer and by impedance spectroscopy. Supported hybrid bilayers formed from phospholipids and alkanethiols are pinhole-free and demonstrate measured values of conductivity and resistivity which are within an order of magnitude of that reported for black lipid membranes. Capacitance values suggest a dielectric constant of 2.7 for phospholipid membranes in the absence of organic solvent. The protein toxin, melittin, destroys the insulating capability of the phospholipid layer without significantly altering the bilayer structure. This model membrane will allow the assessment of the effect of lipid membrane perturbants on the insulating properties of natural lipid membranes.

Regulation of an Arabidopsis oleosin gene promoter in transgenic Brassica napus.

Progressive deletions of the 5'-flanking sequences of an Arabidopsis oleosin gene were fused to beta-glucuronidase (GUS) and introduced into Brassica napus plants using Agrobacterium-mediated transformation. The effect of these deletions on the quantitative level of gene expression, organ specificity and developmental regulation was assessed. In addition, the influence of abscisic acid (ABA), jasmonic acid (JA), sorbitol and a combined ABA/sorbitol treatment on gene expression was investigated. Sequences that positively regulate quantitative levels of gene expression are present between -1100 to -600 and -400 to -200 of the promoter. In addition, sequences present between -600 and -400 down-regulate quantitative levels of expression. In transgenic B. napus plants, the oleosin promoter directs seed-specific expression of GUS which is present at early stages of seed development and increases throughout seed maturation. Sequences present between -2500 and -1100 of the promoter are involved in modulating the levels of expression at early stages of embryo development. Histochemical staining of embryos demonstrated that expression is uniform throughout the tissues of the embryo. Sequences involved in the response to ABA and sorbitol are present between -400 and -200. The induction of GUS activity by a combined ABA/sorbitol treatment is additive suggesting that ABA is not the sole mediator of osmotically induced oleosin gene expression. A response to JA was only observed when the oleosin promoter was truncated to -600 suggesting that the reported effect of JA on oleosin gene expression may be at a post-transcriptional level.

Liposome-based flow-injection immunoassay for determining theophylline in serum.

We developed a method for quantitatively determining theophylline in serum, using a heterogeneous immunoassay called flow-injection immunoanalysis. The reaction involves competition between serum theophylline and theophylline-labeled liposomes. Separation occurs on a solid-phase reactor column containing immobilized antibody to theophylline incorporated in a flow-injection system. Subsequent lysis of the bound liposomes provides sensitive detection of the analyte. Effective regeneration of the immobilized antibody activity allows the reactor to be reused for hundreds of sequential samples. Comparison of the results of the flow-injection immunoassay method with results obtained with a commercially available fluorescence polarization method showed an excellent correlation.

Chloroplast import of the precursor of the gamma subunit of pea chloroplast ATP synthase.

A cDNA clone encoding the complete precursor of the gamma subunit of the pea chloroplast ATP synthase has been isolated from a pea leaf cDNA library in lambda gt 11 following detection with antibodies to the purified gamma subunit. The cDNA insert of 1.4 kbp is smaller than transcripts of about 1.6 kb detected by northern hybridisation of RNA from both light- and darkgrown pea leaves. The cDNA encodes a polypeptide of 376 amino acid residues, of which 52 residues constitute an N-terminal presequence and 324 residues make up the mature protein. Transcription and translation of the cDNA in vitro produced a protein of 42 kDa, which was imported by isolated pea chloroplasts and processed to the mature 36 kDa subunit.

Organ-Specific and Environmentally Regulated Expression of Two Abscisic Acid-Induced Genes of Tomato : Nucleotide Sequence and Analysis of the Corresponding cDNAs.

The cDNAs, pLE4 and pLE25, represent mRNAs that accumulate in response to water deficit and elevated levels of endogenous abscisic acid in detached leaves of drought-stressed tomato (Lycopersicon esculentum Mill., cv Ailsa Craig) (A Cohen, EA Bray [1990] Planta 182: 27-33). DNA sequence analysis of pLE4 and pLE25 showed that the deduced polypeptides were 13.9 and 9.3 kilodaltons, respectively. Each polypeptide was hydrophilic, cysteine- and tryptophan-free, and found to be similar to previously identified proteins that accumulate during the late stages of embryogenesis. pLE4 and pLE25 mRNA accumulated in a similar organ-specific pattern in response to specific abiotic stresses. Yet, expression patterns of the corresponding genes in response to developmental cues were not similar. pLE25 mRNA accumulated to much higher levels in developing seeds than in drought-stressed vegetative organs. pLE4 mRNA accumulated predominantly in drought-stressed leaves. The similarities and differences in the accumulation characteristics of these two mRNAs indicates that more than one mechanism exists for the regulation of their corresponding genes.

Nucleotide sequence and spatial expression pattern of a drought- and abscisic Acid-induced gene of tomato.

The nucleotide sequence of le16, a tomato (Lycopersicon esculentum Mill.) gene induced by drought stress and regulated by abscisic acid specifically in aerial vegetative tissue, is presented. The single open reading frame contained within the gene has the capacity to encode a polypeptide of 12.7 kilodaltons and is interrupted by a small intron. The predicted polypeptide is rich in leucine, glycine, and alanine and has an isoelectric point of 8.7. The amino terminus is hydrophobic and characteristic of signal sequences that target polypeptides for export from the cytoplasm. There is homology (47.2% identity) between the amino terminus of the LE 16 polypeptide and the corresponding amino terminal domain of the maize phospholipid transfer protein. le16 was expressed in drought-stressed leaf, petiole, and stem tissue and to a much lower extent in the pericarp of mature green tomato fruit and developing seeds. No expression was detected in the pericarp of red fruit or in drought-stressed roots. Expression of le16 was also induced in leaf tissue by a variety of other abiotic stresses including polyethylene glycol-mediated water deficit, salinity, cold stress, and heat stress. None of these stresses or direct applications of abscisic acid induced the expression of le16 in the roots of the same plants. The unique expression characteristics of this gene indicates that novel regulatory mechanisms, in addition to endogenous abscisic acid, are involved in controlling gene expression.

Liposome flow injection immunoassay: model calculations of competitive immunoreactions involving univalent and multivalent ligands.

The use of liposomes as detectable reagents in solid-phase immunoassays has been explored in a flow injection immunoanalysis (FIIA) system. Model calculations are presented for FIIA based on the competitive binding of univalent analyte and multivalent liposomes to immobilized antibodies. Parameters such as binding constants, concentrations of liposomes and antibody, and steric hindrance are considered for their relative effects on detectable liposome signal response to analyte concentrations. Qualitative comparisons of the model with the experimental data are made.

Immobilization of binding proteins on nonporous supports. Comparison of protein loading, activity, and stability.

Four different nonporous particulate materials, nylon, polystyrene, soda-lime silicate glass, and fused silica glass, have been evaluated for their appropriateness as immobilization supports for immunoglobulins. A method of protein quantitation that is usually applied to solutions, the bicinchoninic acid (BCA) assay, was used successfully to directly measure ng amounts of protein immobilized on the supports. Two proteins, a monoclonal antibody to theophylline and the biotin binding protein avidin, were studied. Radioactive theophylline and radioactive biotin were used to measure the activity of the immobilized protein. Ligand binding capacity per mm2 of support was measured as a function of amount of protein immobilized. By measuring both the amount of protein immobilized and its ligand binding capacity, we have determined that antitheophylline antibody adsorbed on polystyrene balls loses almost 90% of its binding activity after 65 h, although little protein is lost from the balls over this time. Avidin retains nearly full activity for biotin on polystyrene. The binding activity of biotinyl-antibody conjugate immobilized on avidin-adsorbed polystyrene is stable, even when stored for over 22 wk. Antibody covalently immobilized on soda-lime silicate glass beads retains its binding activity over long-term storage, although only 0.1 mol of 3H-theophylline bind per mol of immobilized antibody. Using fused silica glass particles as the solid support, the same antibody binds approx 0.6 mol of ligand per mol of immobilized antibody protein. The structural "softness" of the immunoglobulin requires that interaction with the surface be prevented in order to maintain activity.

Expression of the wheat chloroplast gene for CF0 subunit IV of ATP synthase.

The nucleotide sequence of the wheat chloroplast atp I gene encoding CF0 subunit IV of ATP synthase has been determined. The gene encodes a polypeptide of 247 amino acid residues with high sequence similarity to subunit IV from other plant chloroplasts and from cyanobacteria. The polypeptide shows sequence homology to the C-terminus of the F0 alpha subunit of Escherichia coli ATP synthase and subunit 6 of mitochondrial ATP synthase. The atp I gene is co-transcribed with the atp H, atp F and atp A genes for other subunits of ATP synthase in wheat. A gene-fusion of most of the atp I coding region with cro'-lacI'-lacZ' has been constructed in pEX2 and the fusion-protein has been used to raise antibodies in rabbits. The antibodies react with a polypeptide of 17 kDa in wheat thylakoid membranes indicating that the wheat atp I gene is expressed at the protein level. A model for the organisation of the polypeptide in the thylakoid membrane with four membrane-spanning segments is proposed.

Liposome flow injection immunoassay: implications for sensitivity, dynamic range, and antibody regeneration.

We have developed a liposome-based flow injection immunoassay (FIIA) system for quantitation of a clinical analyte, theophylline. With very minor changes in assay format, this procedure can also be used for the quantitation of anti-theophylline. Automated sequential analyses were performed at room temperature with picomole sensitivity and a day-to-day coefficient of variation of less than 5% for aqueous solutions. The system components include liposomes that contain fluorophores in their aqueous centers and an immobilized-antibody reactor column. The immunoreactor was regenerated hundreds of times over 3 months of continuous use with no measurable loss of antibody activity. The two assay formats studied produced distinct dynamic ranges for their respective analytes. The special advantages of using flow injection analysis for immunoassays and of using liposomes in FIIA are discussed.

Nucleotide sequence and transcripts of the pea chloroplast gene encoding CFo subunit III of ATP synthase.

The structure and expression of the pea chloroplast atpH gene, encoding ATP synthase CFo subunit III, have been investigated. The atpH gene is situated between the atpI and atpF genes for CFo subunits IV and I, and encodes a hydrophobic polypeptide of 81 amino acid residues which is very similar to subunit III from other species. Analysis of transcripts from the region of chloroplast DNA encoding ATP synthase subunits IV-III-I-alpha shows a complex pattern of transcription, with large transcripts potentially coding for several subunits and also smaller gene-specific transcripts. Two abundant transcripts of 660 nucleotides (nt) and 980 nt specific for atpH were identified. Primer extension and S1 nuclease protection mapping suggested that the 660-nt transcripts were produced by endonucleolytic processing at the sequence, 5'-UGGAAU.