RESUMO
Semiaromatic polyamides are used for metal replacement in advanced engineering applications to reduce weight and improve efficiency, but their range of application is limited by their inherent lack of ductility and toughness. Here, we combined semiaromatic polyamide poly(hexamethylene terephthalamide-co-isophthalamide) (PA6TI) with up to 30 wt % amine-terminated polyethylene (PE(NH2)2) by high-temperature melt compounding, which was suggested to lead to the formation of PA-PE block copolymers at the interface between the PE(NH2)2 and the PA6TI. This resulted in PA6TI/PE(NH2)2 blends with smaller, more uniform particle sizes than in PA6TI blended with nonfunctional PE or the commercial impact modifier, maleic anhydride-functionalized styrene-ethylene-butylene-styrene (SEBS) under the same conditions. The PA6TI/PE(NH2)2 blends and the corresponding glass fiber-reinforced composites consequently showed significantly greater increases in room-temperature tensile ductility and fracture energy with respect to unmodified PA6TI, as well as maintained mechanical stability at high temperatures, and only modest decreases in stiffness and strength, even at high PE(NH2)2 contents. These improvements were attributed to the crystallinity of the PE(NH2)2 particles and to improved morphological stabilization and matrix-particle adhesion, consistent with the presence of PA-PE block copolymer at the matrix-particle interfaces.
RESUMO
Periodontitis affects the attachment of natural teeth, and infection or inflammation associated with periodontitis may affect peri-implant tissues. Enamel matrix derivative (EMD) proteins provide stimulation for self-regeneration of the damaged tissue when applied to wide intrabony defects as part of a mixture with bone graft material. As a first step of the process enhancing cell proliferation and ligament formation, we demonstrated that EMD protein precipitation depends strongly on the physical and chemical characteristics of the bone grafts used in the mixture. To guarantee optimum protein-stimulated self-regulation, the pH of the initial EMD formulation must therefore be adjusted between 3.9 and 4.2 in order to compensate the change in pH induced by the bone graft. Moreover, the interaction between the two components resulted in precipitates of different shape and size differently covering the grafts. This outcome might potentially have clinical implications on cell attachment and periodontal ligament extension, which deserve further in vitro and in vivo tests.
Assuntos
Proteínas do Esmalte Dentário/metabolismo , Ligamento Periodontal/metabolismo , Regeneração , Alicerces Teciduais , Proteínas do Esmalte Dentário/química , Humanos , Concentração de Íons de Hidrogênio , Tamanho da Partícula , Ligamento Periodontal/química , Propriedades de SuperfícieRESUMO
Amelogenin refers to a class of intrinsically disordered proteins that are the major constituents of enamel matrix derivative (EMD), an extract of porcine fetal teeth used in regenerative periodontal therapy. Modifications in molecular conformation induced by external stresses, such as changes in temperature or pH, are known to reduce the effectiveness of EMD. However, detailed descriptions of the conformational behavior of native amelogenin are lacking in the open literature. In the present work, a molecular model for the secondary and tertiary structure of the full-length major porcine amelogenin P173 was constructed from its primary sequence by replica exchange molecular dynamics (REMD) simulations. The REMD results for isolated amelogenin molecules at different temperatures were shown to be consistent with the available spectroscopic data. They therefore represent an important first step toward the simulation of the intra- and intermolecular interactions that mediate self-organization in amelogenin and its behavior in the presence of other EMD components under conditions representative of its therapeutic application.
Assuntos
Amelogenina/química , Proteínas Intrinsicamente Desordenadas/química , Simulação de Dinâmica Molecular , Sequência de Aminoácidos , Animais , Feto , Temperatura Alta , Concentração de Íons de Hidrogênio , Conformação Proteica em alfa-Hélice , Conformação Proteica em Folha beta , Domínios e Motivos de Interação entre Proteínas , Estrutura Terciária de Proteína , Suínos , TermodinâmicaRESUMO
Supercritical carbon dioxide processing of poly-L-lactide (PLLA)/hydroxyapatite (nHA) nanocomposites was investigated as a means to prepare foams suitable as scaffolds in bone tissue engineering applications. For given foaming parameters, addition of nHA to the PLLA gave reduced cell sizes and improved homogeneity in the size distribution, but did not significantly affect the degree of crystallinity, which remained of the order of 50 wt% in all the foams. The compressive modulus and strength were primarily influenced by the porosity and there was no significant reinforcement of the matrix by the nHA. The mechanical properties of the foams were nevertheless comparable with those of trabecular bone, and by adjusting the saturation pressure and depressurization rate it was possible to generate porosities of about 85 %, an interconnected morphology and cell diameters in the range 200-400 µm from PLLA containing 4.17 vol% nHA, satisfying established geometrical requirements for bone replacement scaffolds.
Assuntos
Substitutos Ósseos/química , Durapatita/química , Nanocompostos/química , Poliésteres/química , Alicerces Teciduais/química , Implantes Absorvíveis , Força Compressiva , Cristalização , Módulo de Elasticidade , Humanos , Teste de Materiais , Microscopia Eletrônica de Varredura , Microscopia Eletrônica de Transmissão , Nanocompostos/ultraestrutura , Porosidade , Engenharia Tecidual , Substâncias ViscoelásticasRESUMO
The core-shell structure of a range of acrylic-acrylic latexes has been investigated by combining different specimen preparation methods with transmission electron microscopy (TEM), dark-field scanning transmission electron microscopy (DSTEM) and low-voltage scanning electron microscopy (LV-SEM), including the first reported use of LV-SEM to observe composite latex particles at ambient and subambient temperatures. Spin-coating of liquid latex dispersions directly onto TEM grids or SEM stubs is shown to be a relatively straightforward mean of avoiding film formation during specimen preparation. In conjunction with double staining techniques, it has been found to be particularly convenient for characterizing the fine structure of particles with diameters down to below 100 nm.
RESUMO
We recently discovered that wheat gluten could be formed into a tough, plasticlike substance when thiol-terminated, star-branched molecules are incorporated directly into the protein structure. This discovery offers the exciting possibility of developing biodegradable high-performance engineering plastics and composites from renewable resources that are competitive with their synthetic counterparts. Wheat gluten powder is available at a cost of less than dollars 0.5/lb, so if processing costs can be controlled, an inexpensive alternative to synthetic polymers may be possible. In the present work, we demonstrate the ability to toughen an otherwise brittle protein-based material by increasing the yield stress and strain-to-failure, without compromising stiffness. Water absorption results suggest that the cross-link density of the polymer is increased by the presence of the thiol-terminated, star-branched additive in the protein. Size-exclusion high performance liquid chromatography data of molded tri-thiol-modified gluten are consistent with that of a polymer that has been further cross-linked when compared directly with unmodified gluten, handled under identical conditions. Remarkably, the mechanical properties of our gluten formulations stored in ambient conditions were found to improve with time.
Assuntos
Glutens/química , Teste de Materiais , Proteínas de Plantas/química , Triticum/química , Absorção , Cromatografia Líquida de Alta Pressão/métodos , Reagentes de Ligações Cruzadas/química , Estrutura Molecular , Peso Molecular , Compostos de Sulfidrila/química , Resistência à Tração , Fatores de Tempo , Água/químicaRESUMO
Morphologic characterization of polymers by scanning electron microscopy (SEM) is often made difficult by their sensitivity to electron beam damage. We describe here a specimen preparation method for the imaging of polymer blends by low-voltage SEM (LV-SEM) that improves their stability in the electron beam and hence facilitates focusing and recording of high magnification images. Its application to nanosized core-shell latexes embedded in a polymethylmethacrylate matrix and semi-crystalline polypropylene/ethylene-propylene rubber blends is discussed.