RESUMO
The realization of efficient optical devices depends on the ability to harness strong nonlinearities, which are challenging to achieve with standard photonic systems. Exciton-polaritons formed in hybrid organic-inorganic perovskites offer a promising alternative, exhibiting strong interactions at room temperature (RT). Despite recent demonstrations showcasing a robust nonlinear response, further progress is hindered by an incomplete understanding of the microscopic mechanisms governing polariton interactions in perovskite-based strongly coupled systems. Here, we investigate the nonlinear properties of quasi-2D dodecylammonium lead iodide perovskite (n3-C12) crystals embedded in a planar microcavity. Polarization-resolved pump-probe measurements reveal the contribution of indirect exchange interactions assisted by dark states formation. Additionally, we identify a strong dependence of the unique spin-dependent interaction of polaritons on sample detuning. The results are pivotal for the advancement of polaritonics, and the tunability of the robust spin-dependent anisotropic interaction in n3-C12 perovskites makes this material a powerful choice for the realization of polaritonic circuits.
RESUMO
Room temperature (RT) polariton condensate holds exceptional promise for revolutionizing various fields of science and technology, encompassing optoelectronics devices to quantum information processing. Using perovskite materials, like all-inorganic cesium lead bromide (CsPbBr3) single crystal, provides additional advantages, such as ease of synthesis, cost-effectiveness, and compatibility with existing semiconductor technologies. In this work, the formation of whispering gallery modes (WGM) in CsPbBr3 single crystals with controlled geometry is shown, synthesized using a low-cost and efficient capillary bridge method. Through the implementation of microplatelets geometry, enhanced optical properties and performance are achieved due to the presence of sharp edges and a uniform surface, effectively avoiding non-radiative scattering losses caused by defects. This allows not only to observe strong light matter coupling and formation of whispering gallery polaritons, but also to demonstrate the onset of polariton condensation at RT. This investigation not only contributes to the advancement of the knowledge concerning the exceptional optical properties of perovskite-based polariton systems, but also unveils prospects for the exploration of WGM polariton condensation within the framework of a 3D perovskite-based platform, working at RT. The unique characteristics of polariton condensate, including low excitation thresholds and ultrafast dynamics, open up unique opportunities for advancements in photonics and optoelectronics devices.
RESUMO
Exciton-polaritons derived from the strong light-matter interaction of an optical bound state in the continuum with an excitonic resonance can inherit an ultralong radiative lifetime and significant nonlinearities, but their realization in two-dimensional semiconductors remains challenging at room temperature. Here we show strong light-matter interaction enhancement and large exciton-polariton nonlinearities at room temperature by coupling monolayer tungsten disulfide excitons to a topologically protected bound state in the continuum moulded by a one-dimensional photonic crystal, and optimizing for the electric-field strength at the monolayer position through Bloch surface wave confinement. By a structured optimization approach, the coupling with the active material is maximized here in a fully open architecture, allowing to achieve a 100 meV photonic bandgap with the bound state in the continuum in a local energy minimum and a Rabi splitting of 70 meV, which results in very high cooperativity. Our architecture paves the way to a class of polariton devices based on topologically protected and highly interacting bound states in the continuum.
RESUMO
Rhenium disulfide belongs to group VII transition metal dichalcogenides (TMDs) with attractive properties such as exceptionally high refractive index and remarkable oscillator strength, large in-plane birefringence, and good chemical stability. Unlike most other TMDs, the peculiar optical properties of rhenium disulfide persist from bulk to the monolayer, making this material potentially suitable for applications in optical devices. In this work, we demonstrate with unprecedented clarity the strong coupling between cavity modes and excited states, which results in a strong polariton interaction, showing the interest of these materials as a solid-state counterpart of Rydberg atomic systems. Moreover, we definitively clarify the nature of important spectral features, shedding light on some controversial aspects or incomplete interpretations and demonstrating that their origin is due to the interesting combination of the very high refractive index and the large oscillator strength expressed by these TMDs.
RESUMO
Hybrid perovskites are among the most promising materials for optoelectronic applications. Their 2D crystalline form is even more interesting since the alternating inorganic and organic layers naturally forge a multiple quantum-well structure, leading to the formation of stable excitonic resonances. Nevertheless, a controlled modulation of the quantum well width, which is defined by the number of inorganic layers (n) between two organic ones, is not trivial and represents the main synthetic challenge in the field. Here, a conceptually innovative approach to easily tune n in lead iodide perovskite single-crystalline flakes is presented. The judicious use of potassium iodide is found to modulate the supersaturation levels of the precursors solution without being part of the final products. This allows to obtain a fine tuning of the n value. The excellent optical quality of the as synthesized flakes guarantees an in-depth analysis by Fourier-space microscopy, revealing that the excitons orientation can be manipulated by modifying the number of inorganic layers. Excitonic out-of-plane component, indeed, is enhanced when "n" is increased. The combined advances in the synthesis and optical characterization fill in the picture of the exciton behavior in low-dimensional perovskite, paving the way to the design of materials with improved optoelectronic characteristics.
RESUMO
The engineering of the energy dispersion of polaritons in microcavities through nanofabrication or through the exploitation of intrinsic material and cavity anisotropies has demonstrated many intriguing effects related to topology and emergent gauge fields such as the anomalous quantum Hall and Rashba effects. Here we show how we can obtain different Berry curvature distributions of polariton bands in a strongly coupled organic-inorganic two-dimensional perovskite single-crystal microcavity. The spatial anisotropy of the perovskite crystal combined with photonic spin-orbit coupling produce two Hamilton diabolical points in the dispersion. An external magnetic field breaks time-reversal symmetry owing to the exciton Zeeman splitting and lifts the degeneracy of the diabolical points. As a result, the bands possess non-zero integral Berry curvatures, which we directly measure by state tomography. In addition to the determination of the different Berry curvatures of the multimode microcavity dispersions, we can also modify the Berry curvature distribution, the so-called band geometry, within each band by tuning external parameters, such as temperature, magnetic field and sample thickness.
RESUMO
Hybrid organic-inorganic perovskites are very promising semiconductors for many optoelectronic applications, although their extensive use is limited by their poor stability under environmental conditions. In this work, we synthesize two-dimensional perovskite single crystals and investigate their optical and structural evolution under continuous light irradiation. We found that the hydrophobic nature of the fluorinated component, together with the absence of grain boundary defects, lead to improved material stability thanks to the creation of a robust barrier that preserve the crystalline structure, hindering photo-degradation processes usually promoted by oxygen and moisture.
RESUMO
Excitonic coupling, electronic coupling, and cooperative interactions in self-assembled lead halide perovskite nanocrystals were reported to give rise to a red-shifted collective emission peak with accelerated dynamics. Here we report that similar spectroscopic features could appear as a result of the nanocrystal reactivity within the self-assembled superlattices. This is demonstrated by studying CsPbBr3 nanocrystal superlattices over time with room-temperature and cryogenic micro-photoluminescence spectroscopy, X-ray diffraction, and electron microscopy. It is shown that a gradual contraction of the superlattices and subsequent coalescence of the nanocrystals occurs over several days of keeping such structures under vacuum. As a result, a narrow, low-energy emission peak is observed at 4 K with a concomitant shortening of the photoluminescence lifetime due to the energy transfer between nanocrystals. When exposed to air, self-assembled CsPbBr3 nanocrystals develop bulk-like CsPbBr3 particles on top of the superlattices. At 4 K, these particles produce a distribution of narrow, low-energy emission peaks with short lifetimes and excitation fluence-dependent, oscillatory decays. Overall, the aging of CsPbBr3 nanocrystal assemblies dramatically alters their emission properties and that should not be overlooked when studying collective optoelectronic phenomena nor confused with superfluorescence effects.
RESUMO
PURPOSE: Medical records are a relevant source for real-world evidence. We introduced patient-reported outcomes (PROs) in clinical practice, demonstrating a significant quality-of-life improvement, compared to usual visit. In this secondary analysis, we describe the agreement between patients' and physicians' reports of 5 symptoms. Our hypothesis was that adoption of PROs questionnaire could significantly improve the agreement. METHODS: Eligible patients were receiving active anti-cancer treatment. Patients in the control group underwent usual visits (group A), while patients of group B, before each visit, filled a PROs paper questionnaire, to provide information about symptoms and toxicities. No specific instructions were provided to physicians to integrate such information in medical records. Agreement between patient and physician evaluations was assessed by Cohen's κ, calculating under-reporting as proportion of toxicities reported by patients but not recorded by physicians. RESULTS: 211 patients (412 visits) have been analyzed. For all symptoms, Cohen's κ was better for group B: emesis (0.25 group A vs. 0.36 group B), diarrhea (0.16 vs. 0.57), constipation (0.07 vs. 0.28), pain (0.22 vs. 0.42), fatigue (0.03 vs. 0.08). For all symptoms, although under-reporting was relevant in both groups, it was lower for group B: emesis (75.49% vs. 60.0%, p=0.031), diarrhea (82.89% vs. 50.0%, p<0.001), constipation (92.11% vs. 69.57%, p<0.001), pain (59.57% vs. 42.31%, p=0.01), fatigue (82.11% vs. 64.10%, p<0.001). CONCLUSION: Adoption of paper PROs allowed a significant reduction in under-reporting of symptoms, but agreement remained suboptimal. Direct integration of electronic PROs could minimize the issue of under-reporting of medical records, increasing their accuracy.
Assuntos
Neoplasias , Medidas de Resultados Relatados pelo Paciente , Constipação Intestinal , Diarreia , Fadiga , Humanos , Prontuários Médicos , Neoplasias/terapia , Dor , VômitoRESUMO
Semiconductor devices are strong competitors in the race for the development of quantum computational systems. In this work, we interface two semiconductor building blocks of different dimensionalities with complementary properties: (1) a quantum dot hosting a single exciton and acting as a nearly ideal single-photon emitter and (2) a quantum well in a 2D microcavity sustaining polaritons, which are known for their strong interactions and unique hydrodynamic properties, including ultrafast real-time monitoring of their propagation and phase mapping. In the present experiment, we can thus observe how the injected single particles propagate and evolve inside the microcavity, giving rise to hydrodynamic features typical of macroscopic systems despite their genuine intrinsic quantum nature. In the presence of a structural defect, we observe the celebrated quantum interference of a single particle that produces fringes reminiscent of wave propagation. While this behavior could be theoretically expected, our imaging of such an interference pattern, together with a measurement of antibunching, constitutes the first demonstration of spatial mapping of the self-interference of a single quantum particle impinging on an obstacle.
RESUMO
Sources of single photons are a fundamental brick in the development of quantum information technologies. Great efforts have been made so far in the realization of reliable, highly efficient, and on demand quantum sources that could show an easy integration with quantum devices. This has recently culminated in the use of solid state quantum dots as promising candidates for future sources of quantum technologies. However, some challenges, like their complex fabrication, random distribution, and difficult integrability with silicon technology, could hinder their broad application, making necessary the study of alternative systems. In this work, we clearly demonstrate single photon emission from quantum dots formed in nonstoichiometric bulk perovskites. Their simple growing procedures, exceptional stability under constant illumination, easy control of their optical properties, as well as ease of integrability make these materials very interesting candidates for the development of quantum light sources in the near-infrared.
RESUMO
INTRODUCTION: Patient-reported outcomes (PROs) are the gold standard to describe subjective symptoms. Nurses can be successfully involved in collecting symptom information, because of their direct relationship with the patient. In order to improve clinical management of outpatients receiving active anti-cancer treatment, we introduced in routine clinical practice an assessment of patient-reported symptoms and toxicities, starting from January 2018. Our hypothesis was that this could help to better control symptoms, improving patients' quality of life (QoL). METHODS: Eligible patients were receiving an active anti-cancer treatment, as outpatients. Patients included in the control group (treated in 2017) underwent "usual" visits (group A), while patients treated in 2018, before each visit received a questionnaire by a dedicated nurse, in order to provide information about symptoms and toxicities (group B). Primary objective was the comparison of QoL changes, measured by EORTC QLQ-C30. RESULTS: A total of 211 patients have been analyzed (119 group A; 92 group B). After 1 month, mean change from baseline of global QoL was - 1.68 in group A and + 2.54 in group B (p = 0.004, effect size 0.20). Group B showed significantly better mean changes for fatigue, pain, and appetite loss. Proportion of patients obtaining a clinically significant improvement in global QoL score was higher in group B (32.6%) compared to group A (19.3%, p = 0.04). Patients' satisfaction with questionnaire was high. CONCLUSION: Introduction of PROs in clinical practice, thanks to an active role of nurses, was feasible, produced high patients' satisfaction and a significant QoL improvement, compared to the traditional modality of visit.