From phosphanylphosphaalkenes to coordination copper and silver polymers containing P-P bonds.

This study was focused on the activation of the CP bond via reactions of Ph2CP-PtBu2 (1) with 1,6-hexanediol and selected dithiols (1,4-butanedithiol, 1,4-benzenedithiol and 1,4-benzenedimethanethiol). These reactions proceed according to a 1,2-addition mechanism, providing new compounds with formulas {(Ph)2(H)C-P-PtBu2}{µ2-(O-(CH2)6-O)}{tBu2P-P-C(H)(Ph)2} (2), {(Ph)2(H)C-P-PtBu2}{µ2-(S-(CH2)4-S)}{tBu2P-P-C(H)(Ph)2} (3a), {(Ph)2(H)C-P-PtBu2}{µ2-(S-C6H4-S)}{tBu2P-P-C(H)(Ph)2} (3b), and {(Ph)2(H)C-P-PtBu2}{µ2-(S-CH2-C6H4-CH2-S)}{tBu2P-P-C(H)(Ph)2} (3c). Next, the reactions of 3a and 3c with metal chlorides led to the growth of desired coordination polymers of copper(I) and silver(I). All the obtained compounds remained stable under atmospheric conditions.

Solvent influence on the crystal structures of new cadmium tri-tert-butoxysilanethiolate complexes with 1,4-bis(3-aminopropyl)piperazine: luminescence and antifungal activity.

Monocrystals of dinuclear µ-1,4-bis(3-aminopropyl)piperazine-κ4N1,N1':N4,N4'-bis[bis(tri-tert-butoxysilanethiolato-κS)cadmium(II)], [Cd2(C12H27O3SSi)4(C10H24N4)] or [Cd2{SSi(OtBu)3}4(µ-BAPP)], 1, and polynuclear catena-poly[[bis(tri-tert-butoxysilanethiolato-κS)cadmium(II)]-µ-1,4-bis(3-aminopropyl)piperazine-κ2N1':N4'], [Cd(C12H27O3SSi)2(C10H24N4)]n or [Cd{SSi(OtBu)3}2(µ-BAPP)]n, 2, with 1,4-bis(3-aminopropyl)piperazine (BAPP) and tri-tert-butoxysilanethiolate ligands, were obtained from the same ratio of reactants, but with different solvents used for the crystallization processes. The structures and properties of both complexes were characterized using elemental analysis, X-ray diffraction and FT-IR, 1H NMR and luminescence spectroscopy. Applied density functional theory (DFT) computational methods and noncovalent interaction (NCI) analysis were used for geometry optimization and visualization of the interactions between the metallic centres and their surroundings. The X-ray analysis revealed four-coordinate CdII centres bound to two S atoms of the silanethiolate groups and two N atoms of the BAPP ligand; however, it chelates to tertiary and primary N atoms in 1, whilst in 2 it does not chelate and bonds only to RNH2. The photoluminescence properties of complexes 1 and 2 result from free-ligand emission and differ significantly from each other with respect to emission intensity. Additionally, antifungal activity was investigated against 18 isolates of fungi. Compound 1 strongly inhibited the growth of three dermatophytes: Epidermophyton floccosum, Microsporum canis and Trichophyton rubrum.

Benzophosphol-3-yl Triflates as Precursors of 1,3-Diarylbenzophosphole Oxides.

A simple method for the synthesis of 3-arylbenzophosphole oxides under Suzuki-Miyaura coupling conditions has been presented. It employs benzophosphol-3-yl triflate starting materials which, prior to our work, had not been used for the synthesis of 3-arylbenzophosphole oxides. The reactions proceed over 24 h and provide a library of 3-arylbenzophosphole oxides. The synthetic access to the benzophosphol-3-yl triflates has been improved. The preliminary photophysical properties of some 3-arylbenzophosphole oxides have been investigated by absorption and emission measurements. The theoretical calculations were performed to establish structure-property relationships.

Activation of the C[double bond, length as m-dash]P bond in phosphanylphosphaalkenes (C[double bond, length as m-dash]P-P bond system) in the reaction with nucleophilic reagents: MeLi, nBuLi and tBuLi.

Three reactions of phosphanylphosphaalkene (1) with nucleophiles were performed to activate the diphosphorus monomer. We observed similar results in the reactions with MeLi and nBuLi, in which the P-P bond is cleavaged and triphosphorus systems [P(Me)2-CH(biph)-CH(biph)-P-(PtBu2)]- (1a'') and [P(nBu)2-CH(biph)-CH(biph)-P-(PtBu2)]- (1b''), respectively, are formed depending on the nucleophilic reagent (biph = biphenyl). In the case of tBuLi, the P-P bond remains intact; on the phosphorus atom, only one -tBu group is substituted, and as a result, [(biph)(H)C-P(tBu)-PtBu2]- (1c) is generated as a stable carbanion. We additionally investigated the effect of substitution in the phenyl ring in the course of these reactions by involving two other phosphanylphosphaalkenes (3 and 4). All initial reactions were conducted in tetrahydrofuran (THF) solution at ambient temperature.

Ring Opening of Triflates Derived from Benzophospholan-3-one Oxides by Aryl Grignard Reagents as a Route to 2-Ethynylphenyl(diaryl)phosphine Oxides.

A new simple method for the synthesis of 2-ethynylphenyl(diaryl)phosphine oxides via ring opening of benzophosphol-3-yl triflates has been developed. This process occurs via nucleophilic attack of a Grignard reagent at the phosphorus center, which results in ring opening and cleavage of a leaving group. The reaction proceeds under mild conditions and, within 15-60 min, leads to a library of previously unavailable 2-ethynylphenylphosphine oxides in yields up to 98%.

Experimental and theoretical investigation of the reactivity of [(BDI*)Ti(Cl){η2-P(SiMe3)-PiPr2}] towards selected ketones.

In this work, we report a new type of reactivity of [(BDI*)Ti(Cl){η2-P(SiMe3)-PiPr2}] (1) towards ketones (BDI* = 2,6-diisopropylphenyl-ß-methyldiketiminate ligand). In the reaction of 1 with acetone, cyclopentanone or cyclohexanone, a ketone moiety is inserted into Ti-Pphosphanyl or Ti-Pphosphido bonds to form complexes with a new C-P-P moiety, providing [(BDI*)Ti(Cl){η2-P(SiMe3)-PiPr2-C(Me)2O}] (2a), [(BDI*)Ti(Cl){η2-OC(Me)2P(SiMe3)-PiPr2}] (2b), [(BDI*)Ti(Cl){η2-P(SiMe3)-P(iPr)2-{C(CH2)4}O}] (3a), and [(BDI*)Ti(Cl){η2-P(SiMe3)-P(iPr)2-{C(CH2)5}O}] (4a). Starting complex 1 reacts with cyclohexanone, yielding a monocrystalline complex [{(ArN[double bond, length as m-dash]C(Me)CHC(Me)[double bond, length as m-dash]NAr)C(CH2)5O}Ti(Cl){PiPr2-P(SiMe3)C(CH2)5O}] (4d) with the insertion of two ketone molecules. Interestingly, we found that monoinserted complexes 2a and 3a may be oxidized via a reaction with AgCl, leading to elimination of the -SiMe3 group and oxidation of the titanium atom. This reaction led us to isolate the Ti(iv) complex [(BDI*)Ti(Cl){η2-P-P(iPr)2-{C(CH2)5}O}] (5) in crystalline form. To identify the kinds of products that may be formed and determine which products are the most energetically favoured ones, we conducted a thermodynamic DFT study of 1 towards acetone, cyclopentanone and cyclohexanone. Structures 2a, 2b, 3a, 3e, 4a, 4d, and 5 were characterized by X-ray crystallography, and complex 5 was also identified by NMR spectroscopy.

Synthesis of compounds with C-P-P and C[double bond, length as m-dash]P-P bond systems based on the phospha-Wittig reaction.

A reactivity study of a ß-diketiminate titanium(iii) phosphanylphosphido complex [MeNacNacTi(Cl){η2-P(SiMe3)-PtBu2}] (1) towards ketones such as benzophenone, 9-fluorenone, acetophenone, cyclopentanone, cyclohexanone and cycloheptanone is reported. The reactions of 1 with aromatic ketones (without α-protons) directly lead to the Ti(iii) complex [MeNacNacTi(µ2-Cl)(OSiMe3)] (5) and Ti(iv) complexes with the pinacol condensation product [MeNacNacTi(OSiMe3)(η2-pinacolate)] (3), and phosphanylphosphaalkenes Ph2C[double bond, length as m-dash]P-PtBu2 (2) and (fluorenyl)C[double bond, length as m-dash]P-PtBu2 (6), respectively. The reaction with acetophenone leads to the titanium(iii) complex with the aldol condensation product as ligand [MeNacNacTi(Cl){OC{Me(Ph)}CH2(C[double bond, length as m-dash]O)Ph}] (8) and in parallel to phosphanylphosphaalkene (Ph)MeC[double bond, length as m-dash]P-PtBu2 (9) and 5. The reactions of 1 with cyclic ketones (cyclopentanone and cyclohexanone) lead to Ti(iii) complexes [{(ArN[double bond, length as m-dash]C(Me)CHC(Me)[double bond, length as m-dash]NAr)((CH2)4CO)}Ti(Cl){PtBu2-P(SiMe3)((CH2)4CO)}] (10) and [{(ArN[double bond, length as m-dash]C(Me)CHC(Me)[double bond, length as m-dash]NAr)((CH2)5CO)}Ti(Cl){PtBu2-P(SiMe3)((CH2)5CO)}] (11), which are formed via the successive insertion of two molecules of ketone to one molecule of 1. The stability investigation of complexes 10 and 11 in a polar solvent (THF) revealed that under these conditions, the complexes decompose, resulting in titanium(iii) complexes with aldol condensation products and the expected phosphanylphosphaalkenes (CH2)4C[double bond, length as m-dash]P-PtBu2 (10a) and (CH2)5C[double bond, length as m-dash]P-PtBu2 (11a). In the reaction of 1 with cycloheptanone, only the Ti(iii) complex with the aldol condensation product [MeNacNacTi(Cl){OC(CH2)6}CH(C[double bond, length as m-dash]O)(CH2)5] (12) was isolated. The structures 3, 5, 8, 10, 11, 11b and 12 were characterized by X-ray spectroscopy, while all the phosphanylphosphaalkenes were characterized by NMR spectroscopy.

Homoleptic mono-, di-, and tetra-iron complexes featuring phosphido ligands: a synthetic, structural, and spectroscopic study.

We report the first series of homoleptic phosphido iron complexes synthesized by treating either the ß-diketiminato complex [(Dippnacnac)FeCl2Li(dme)2] (Dippnacnac = HC[(CMe)N(C6H3-2,6-iPr2)]2) or [FeBr2(thf)2] with an excess of phosphides R2PLi (R = tBu, tBuPh, Cy, iPr). Reaction outcomes depend strongly on the bulkiness of the phosphido ligands. The use of tBu2PLi precursor led to an anionic diiron complex 1 encompassing a planar Fe2P2 core with two bridging and two terminal phosphido ligands. An analogous reaction employing less sterically demanding phosphides, tBuPhPLi and Cy2PLi yielded diiron anionic complexes 2 and 3, respectively, featuring a short Fe-Fe interaction supported by three bridging phosphido groups and one additional terminal R2P- ligand at each iron center. Further tuning of the P-substrates bulkiness gave a neutral phosphido complex 4 possessing a tetrahedral Fe4 cluster core held together by six bridging iPr2P moieties. Moreover, we also describe the first homoleptic phosphanylphosphido iron complex 5, which features an iron center with low coordination provided by three tBu2P-P(SiMe3)- ligands. The structures of compounds 1-5 were determined by single-crystal X-ray diffraction and 1-3 by 1H NMR spectroscopy. Moreover, the electronic structures of 1-3 were interrogated using zero-field Mössbauer spectroscopy and DFT methods.

Syntheses and Structures of Transition Metal Complexes with Phosphanylphosphinidene Chalcogenide Ligands.

The reactivity of the phosphanylphosphinidene complex [(DippN)2W(Cl)(η2-P-P tBu2)]- (1) toward chalcogens (Ch = Se, S) was studied. Reactions of stoichiometric amounts of 1 with chalcogens in DME yielded monomeric tungsten complexes with phosphanylphosphinidene chalcogenide ligands of the formula tBu2P-P-Ch (Ch = Se (in 2) and S (in 5)), which can be regarded as products of the addition of a chalcogen atom to a P═W bond in starting complex 1. The dissolution of selenophosphinidene complex 2 in nondonor solvents led to the formation of a dinuclear complex of tungsten (3) bearing a tBu2P(Se)-P ligand together with [ tBuSe2Li(dme)2]2 and polyphosphorus species. Under the same reaction conditions, thiophosphinidene complex 5 dimerized via the formation of transient complex 7, possessing a thiotetraphosphane-diido moiety tBu2P(S)-P-P-P tBu2. The elimination of the tBu2PS group from 7 yielded stable dinuclear tungsten complex 8 with an unusual phosphinidene tBu2P-P-P ligand. The reaction of 1 with excess chalcogen led to the cleavage of the P-P bond in the tBu2P-P ligand and the formation of [(DippN)2W(PCh4)]22- and [ tBuCh2Li(dme)2]2. The isolated compounds were characterized by NMR spectroscopy and X-ray crystallography. Furthermore, the calculated geometries of the free selenophosphinidenes, tBu2P-P-Se and tBu2P(Se)-P, were compared with their geometries when serving as ligands in complexes 2 and 3.

Diphosphination of CO2 and CS2 mediated by frustrated Lewis pairs - catalytic route to phosphanyl derivatives of formic and dithioformic acid.

The first example of CO2 diphosphination is described. Reactions of unsymmetrical diphosphanes with CE2 (E = O, S) catalyzed by BPh3 insert a CE2 molecule into the P-P bond with formation of the products of the general formula R2P-E-C([double bond, length as m-dash]E)-PR2. The obtained CO2 adducts arise from synergistic interaction of diphosphane and borane with CO2 molecule.

Symmetrical and unsymmetrical diphosphanes with diversified alkyl, aryl, and amino substituents.

We present the comprehensive study of diphosphanes with diversified substituents regarding their syntheses, structures, and properties. To this end, we have synthesized a series of novel unsymmetrical alkyl, aryl and amino-substituted diphosphanes of the general formula R1R2P-PR3R4 (where R1, R2, R3, R4 = tBu, Ph, Et2N or iPr2N) via a salt metathesis reaction of halophosphanes with metal phosphides in high yield. We vastly expanded this group of compounds by obtaining the first mono- and tri-amino-substituted systems. The structures of the isolated compounds were characterized by NMR spectroscopy and X-ray diffraction. The isolated unsymmetrical diphosphanes have no tendency to rearrange to the corresponding symmetrical species. Additionally, we proposed the general classification of diphosphanes based on the number of different groups attached to phosphorus atoms and their distribution within a molecule. To investigate the impact of substituents on the properties of P-centers and a molecule as a whole, we conducted a DFT study on the electronic and steric properties of the obtained systems. The experimental and theoretical results can be very useful for designing P-P systems with desired properties.

Reactions of (Ph)tBuP-P(SiMe3)Li·3THF with [(PNP)TiCl2] and [MeNacNacTiCl2·THF]: synthesis of first PNP titanium(iv) complex with the phosphanylphosphinidene ligand [(PNP)Ti(Cl){η2-P-P(Ph)tBu}].

Herein, the lithium derivative of diphosphane, (Ph)tBuP-P(SiMe3)Li (1), is isolated for the first time and investigated in reactions with ß-diketiminate (MeNacnac- = [Ar]NC(Me)CHC(Me)N[Ar]; Ar = 2,6-iPr2C6H3) and PNP-pincer (PNP = N[2-PiPr2-4-methylphenyl]2) Ti(iii) complexes. The ß-diketiminate titanium(iii) complex containing the phosphanylphosphido ligand [MeNacNacTi(Cl){η2-P(SiMe3)-P(Ph)tBu}] (2) is prepared via the reaction of [MeNacNacTiCl2·THF] with (Ph)tBuP-P(SiMe3)Li in toluene solution with good yield and purity. The corresponding titanium(iv) complex involving the phosphanylphosphinidene ligand [MeNacNacTi(Cl){η2-P-P(Ph)tBu}] (3) is synthesized via the oxidation of complex (2) with [iBu3PAgCl]4. Interestingly, an analogous PNP titanium(iv) complex, [(PNP)Ti(Cl){η2-P-P(Ph)tBu}] (4), is obtained in the reaction of [(PNP)TiCl2] with (Ph)tBuP-P(SiMe3)Li in toluene solution and a 1 : 1 molar ratio instead of the expected titanium(iii) complex with the phosphanylphosphido ligand. The solid-state structures of (Ph)tBuP-P(SiMe3)Li·3THF (1), [MeNacNacTi(Cl){η2-P(SiMe3)-P(Ph)tBu}] (2), [MeNacNacTi(Cl){η2-P-P(Ph)tBu}] (3) and [(PNP)Ti(Cl){η2-P-P(Ph)tBu}] (4) are determined by single-crystal X-ray diffraction, which reveals that in all obtained complexes, both the phosphanylphosphinidene (Ph)tBuP-P and phosphanylphosphido (Ph)tBuP-P(SiMe3) ligands are bidentate-coordinated to the metal center.

Synthetic, Structural, and Spectroscopic Characterization of a Novel Family of High-Spin Iron(II) [(ß-Diketiminate)(phosphanylphosphido)] Complexes.

This work describes a series of iron(II) phosphanylphosphido complexes. These compounds were obtained by reacting lithiated diphosphanes R2PP(SiMe3)Li (R = t-Bu, i-Pr) with an iron(II) ß-diketiminate complex, [LFe(µ2-Cl)2Li(DME)2] (1), where DME = 1,2-dimethoxyethane and L = Dippnacnac (ß-diketiminate). While the reaction of 1 with t-Bu2PP(SiMe3)Li yields [LFe(η1-Me3SiPP-t-Bu2)] (2), that of 1 with equimolar amounts of i-Pr2PP(SiMe3)Li, in DME, leads to [LFe(η2-i-Pr2PPSiMe3)] (3). In contrast, the reaction of 1 with (i-Pr2N)2PP(SiMe3)Li provides not an iron-containing complex but 1-[(diisopropylamino)phosphine]-2,4-bis(diisopropylamino)-3-(trimethylsilyl)tetraphosphetane (4). The structures of 2-4 were determined using diffractometry. Thus, 2 exhibits a three-coordinate iron site and 3 a four-coordinate iron site. The increase in the coordination number is induced by the change from an anticlinal to a synclinal conformation of the phoshpanylphosphido ligands. The electronic structures of 2 and 3 were assessed through a combined field-dependent 57Fe Mössbauer and high-frequency and -field electron paramagnetic resonance spectroscopic investigation in conjunction with analysis of their magnetic susceptibility and magnetization data. These studies revealed two high-spin iron(II) sites with S = 2 ground states that have different properties. While 2 exhibits a zero-field splitting described by a positive D parameter (D = +17.4 cm-1; E/D = 0.11) for 3, this parameter is negative [D = -25(5) cm-1; E/D = 0.15(5)]. Density functional theory (DFT) and time-dependent DFT (TDDFT) calculations provide insights into the origin of these differences and allow us to rationalize the fine and hyperfine structure parameters of 2 and 3. Thus, for 2, the spin-orbit coupling mixes a z2-type ground state with two low-lying {xz/yz} orbital states. These interactions lead to an easy plane of magnetization, which is essentially parallel to the plane defined by the N-Fe-N atoms. For 3, we find a yz-type ground state that is strongly mixed with a low-lying z2-type orbital state. In this case, the spin-orbit interaction leads to a partial unquenching of the orbital momentum along the x axis, that is, to an easy axis of magnetization oriented roughly along the Fe-P bond of the phosphido moiety.

The reactivity of 1,1-dichloro-2,2-di-tert-butyldiphosphane towards lithiated metal carbonyls: a new entry to phosphanylphosphinidene dimers.

Reactions of [Cp*(OC)3M]Li (Cp* = C5Me5, M = Mo, W) towards t-Bu2P-PCl2 lead to the formation of phosphanylphosphinidene dimers [Cp*(OC)3M(η(2)-t-Bu2P-P)]2 in fairly good yields. The formation of a tetraphosphorus ligand proceeds via reductive dimerization of t-Bu2P-P units. NMR, X-ray investigations and DFT calculations show that the resulting tetraphosphorus ligand has a structure of dication t-Bu2P(+)=P-P=P(+)t-Bu2.

An investigation on the chemistry of the R2P = P ligand: reactions of a phosphanylphosphinidene complex of tungsten(VI) with electrophilic reagents.

The nucleophilic properties of the title compound [(2,6-i-Pr2C6H3N)2(Cl)W(η(2)-t-Bu2P = P)]Li·3DME (1) were investigated in reactions with selected electrophilic reagents such as MeI, M(CO)5THF (M = Cr, Mo, W), AlCl3, and GaCl3. Methylation of 1 by MeI yields phosphanylphosphido complexes [(2,6-i-Pr2C6H3N)2W(X)(1,2-η-t-Bu2P = P-CH3)] (X = Cl, I) (2-Cl/2-I) with the formation of a new P-C bond. Moreover, 1 reacts with electrophilic compounds [(OC)5M·THF] (M = Cr, Mo, W) to yield a series of novel dinuclear phosphanylphosphinidene complexes [(2,6-i-Pr2C6H3N)2(Cl)W(1,2-η-t-Bu2P = P-M(CO)5)]Li·3DME (3, 4, 5) with very long P-M distances. Adducts [(2,6-i-Pr2C6H3N)2(Cl)W(1,2-η-t-Bu2P = P-MCl3)]Li·3DME (6, 7) formed by reaction of 1 with GaCl3 and AlCl3 are labile and dissociate into 1 and MCl3 (M = Ga, Al). The outcomes of reactions were monitored by (31)P-NMR spectroscopy. Furthermore, the structures of the isolated complexes 2-Cl/2-I, 3, 4, and [(2,6-i-Pr2C6H3N)2(Cl)W(1,2-η-t-Bu2P = P-W(t-Bu2PH)(CO)3COLi·2DME] (5-P) were confirmed unambiguously by X-ray diffraction studies.

Reactivity of Phosphanylphosphinidene Complex of Tungsten(VI) toward Phosphines: A New Method of Synthesis of catena-Polyphosphorus Ligands.

The reactivity of an anionic phosphanylphosphinidene complex of tungsten(VI), [(2,6-i-Pr2C6H3N)2(Cl)W(η(2)-t-Bu2P═P)]Li·3DME toward PMe3, halogenophosphines, and iodine was investigated. Reaction of the starting complex with Me3P led to formation of a new neutral phosphanylphosphinidene complex, [(2,6-i-Pr2C6H3N)2(Me3P)W(η(2)-t-Bu2P═P)]. Reactions with halogenophosphines yielded new catena-phosphorus complexes. From reaction with Ph2PCl and Ph2PBr, a complex with an anionic triphosphorus ligand t-Bu2P-P((-))-PPh2 was isolated. The main product of reaction with PhPCl2 was a tungsten(VI) complex with a pentaphosphorus ligand, t-Bu2P-P((-))-P(Ph)-P((-))-P-t-Bu2. Iodine reacted with the starting complex as an electrophile under splitting of the P-P bond in the t-Bu2P═P unit to yield [(1,2-η-t-Bu2P-P-P-t-Bu2)W(2,6-i-Pr2C6H3N)2Cl], t-Bu2PI, and phosphorus polymers. The molecular structures of the isolated products in the solid state and in solution were established by single crystal X-ray diffraction and NMR spectroscopy.

Structural Variety of Cobalt(II), Nickel(II), Zinc(II), and Cadmium(II) Complexes with 4,4'-Azopyridine: Synthesis, Structure and Luminescence Properties.

Self-assembled bi- and polymetallic complexes of Co(II), Ni(II), Zn(II), and Cd(II) were obtained by the reaction of 4,4'-azopyridine (azpy) with metal tri-tert-butoxysilanethiolates (Co, 1; Cd, 2), acetylacetonates (Ni, 3; Zn, 4), and acetates (Cd, 5). All compounds were characterized by single-crystal X-ray structure analysis, elemental analysis, FTIR spectroscopy, and thermogravimetry. Complexes 1, 2 and 4, 5 exhibit diverse structural conformations: 1 is bimetallic, 2 and 4 are 1D coordination polymers, and 5 is a 2D coordination framework formed from bimetallic units. The obtained complexes contain metal atoms bridged by a molecule of azpy. The luminescent properties of 1-5 were investigated in the solid state.

Synthesis and characterization of mononuclear Zn(II), Co(II) and Ni(II) complexes containing a sterically demanding silanethiolate ligand derived from tris(2,6-diisopropylphenoxy)silanethiol.

Four heteroleptic complexes of nickel(ii), cobalt(ii) and zinc(ii), containing a monodentate silanethiolate ligand derived from tris(2,6-diisopropylphenoxy)silanethiol (TDST), were prepared and characterized. Nickel(ii) and cobalt(ii) complexes of the formula M(NH3)2(TDST)2 (M = Ni(ii) complex , M = Co(ii) complex ) were obtained from the respective chlorides. Zinc complexes of the general formula Zn(acac)(TDST)(L), where L = EtOH (complex ) or H2O (complex ), were obtained from zinc acetylacetonate. A single-crystal X-ray structural analysis revealed that all crystalline products are solvent adducts. The geometries of ligands in the complexes are typical: distorted tetrahedral in zinc and cobalt(ii) complexes and square planar in nickel(ii) compounds. Magnetic studies performed for Ni(ii) and Co(ii) compounds confirmed the diamagnetic character of the first complex and high-spin paramagnetic configuration of the latter. Nickel(ii) and cobalt(ii) complexes were additionally characterized by UV-Vis and IR spectroscopy. IR bands for ligands in the complexes were assigned with the help of the DFT vibrational frequency calculations.

Bis(diethyl-amido-κN)(diethyl-amine-κN)bis-(2,6-diisopropyl-phenyl-amido-κN)zirconium(IV).

In the title compound, [Zr(C(12)H(18)N)(2)(C(4)H(10)N)(2)(C(4)H(11)N)] or [Zr(HNC(6)H(3) (i)Pr(2))(2)(NEt(2))(2)(HNEt(2))], which was obtained by the reaction of Zr(NEt)(4) with (i)Pr(2)C(6)H(3)NH(2), the Zr(IV) atom is in a trigonal-bipiramidal geometry in which the N atoms from two (i)Pr(2)C(6)H(3)NH and one NEt(2) ligand occupy the equatorial positions, and the N atoms of an NEt(2) and an Et(2)NH ligand occupy the apical positions. An intra-molecular N-H⋯N contact occurs. There are two independent molecules in the asymmetric unit.

[N,N'-Bis(2,6-diisopropyl-phen-yl)pentane-2,4-diamine-(1-)-2κN,N']-µ(2)-chlorido-1:2κCl:Cl-chlorido-2κCl-bis-(1,2-di-methoxy-ethane-1κO,O')iron(II)lithium.

In the title compound, [FeLi(C(29)H(41)N(2))Cl(2)(C(4)H(10)O(2))(2)], the Fe(II) atom is coordinated by two N and two Cl atoms, generating a distorted FeN(2)Cl(2) tetra-hedral geometry. Additionally, one of the chloride atoms bridges to a lithium ion, which is solvated by two dimethoxy-ethane mol-ecules and is coordinated in a distorted trigonal-bipyramidal environment. The central Fe, Cl (× 2) and Li atoms are coplanar with a maximum deviation of 0.034 Å.