Analysis of abduction moment arms after rotator cuff tear and acellular dermal matrix allograft reconstruction.

BACKGROUND: Biomechanical testing of abduction moment arms presents a useful method to assess the contributions of individual rotator cuff muscles to glenohumeral function. This study aimed to investigate the changes in abduction moment arms after the treatment of supraspinatus tears with superior capsular reconstruction (SCR), bursal acromial reconstruction (BAR), and a combined SCR-BAR procedure, all with human dermal allograft. METHODS: We tested 7 fresh-frozen cadaveric specimens under 6 conditions: (1) intact, (2) 50% supraspinatus tear (partial tear), (3) 100% supraspinatus tear, (4) SCR, (5) SCR combined with BAR, and (6) BAR. In each condition, the moment arms for the individual muscles of the teres minor, subscapularis, and infraspinatus were calculated throughout 90° of abduction using a motion capture system. Analysis of variance and post hoc Tukey testing were performed to determine significance. RESULTS: In the teres minor, the moment arms in the SCR (11.9 mm), BAR (10.1 mm), and SCR-BAR (11.9 mm) conditions were greater than those in the intact (8.5 mm; P = .001, P = .001, and P = .001, respectively), partial tear (9.1 mm; P = .001, P = .128, and P = .001, respectively), and complete tear (8.8 mm; P = .001, P = .011, and P = .001, respectively) conditions. Similarly, in the subscapularis, the moment arms in the SCR (13.4 mm), BAR (13.8 mm), and SCR-BAR (13.5 mm) conditions were greater than those in the intact (10.6 mm; P = .006, P = .001, and P = .003, respectively) and partial tear (10.4 mm; P = .006, P = .001, and P = .003, respectively) conditions. In the teres minor, the SCR (11.9 mm) and SCR-BAR (11.9 mm) conditions were also found to have significantly increased moment arms compared with the BAR condition (10.1 mm; P = .001 and P = .001, respectively). In the infraspinatus, the BAR condition (13.8 mm) was found to have a significantly decreased moment arm compared with the partial tear condition (15.8 mm, P = .026), with no other significant findings between conditions. CONCLUSION: Our results suggest that the moment arm contributions of the individual muscles comprising the rotator cuff can change after reconstruction to compensate for tears. SCR and SCR-BAR increase the moment arms in the teres minor and subscapularis, potentially allowing for increased abduction ability.

Assessment of Cervical and Lumbar Kinematics in Simulated Open and Closed Kinetic Chain.

BACKGROUND: The pelvic girdle and spine vertebral column work as a long chain influenced by pelvic tilt. This study aims to assess the effect of open and closed chain anterior pelvic tilt (APT) or posterior pelvic tilt (PPT) on cervical and lumbar spine kinematics using an in vitro cadaveric spine model. METHODS: Three human cadaveric spines with intact pelvis were suspended with the skull fixed in a metal frame. Optotrak 3-dimensional motion system captured coordinates of pin markers at 24 different points for real-time tracking of cervical and lumbar regions. Additional geometric parameters were measured to calculate pelvic incidence and pelvic tilt. A force-torque digital gauge applied consistent force to standardize the acetabular or sacral axis' APT and PPT during simulated open- and closed-chain movements, respectively. RESULTS: In closed-chain PPT, significant differences in relative intervertebral decompression were noted between spinal levels C2/C3 (4.85 mm) and C5/C6 (1.26 mm), while compression was noted between L1/L2 (-2.54 mm) and L5/S1 (-11.84 mm) and between L3/L4 (-2.78 mm) and L5/S1 (-11.84 mm) (P < 0.05). Displacement during closed-chain PPT was significantly greater than during open-chain PPT for cervical and lumbar spines. In closed-chain APT, significant differences in relative intervertebral decompression were noted between spinal levels L1/L2 (2.87 mm) and L5/S1 (24.48 mm) and between L3/L4 (2.94 mm) and L5/S1 (24.48 mm) (P < 0.05). Pelvic incidence remained the same as the pelvis tilted anterior and posterior. CONCLUSIONS: In PPT, open-chain pelvic tilts did not produce as much cervical and lumbar intervertebral displacement compared with closed-chain pelvic tilts. In contrast, APT saw fewer differences between open- and closed-chain tilting. There was a reciprocal relationship between pelvic tilt and sacral slope, producing a constant pelvic incidence throughout all pelvic tilt angles. CLINICAL RELEVANCE: The results of this study may help determine how a patient's pelvic tilt is causing pain and using that knowledge to guide rehabilitation of stabilizing muscles. The data produced here may also be helpful in determining which rehabilitation exercises may be more difficult or prone to injury for patients with either excessive anterior or posterior pelvic tilt.

A cognitive task, deep breathing, and static stretching reduce variability of motor evoked potentials during subsequent transcranial magnetic stimulation.

BACKGROUND: Motor evoked potentials (MEPs) induced via transcranial magnetic stimulation (TMS) demonstrate trial-to-trial variability limiting detection and interpretation of changes in corticomotor excitability. This study examined whether performing a cognitive task, voluntary breathing, or static stretching before TMS could reduce MEP variability. METHODS: 20 healthy young adults performed no-task, a cognitive task (Stroop test), deep breathing, and static stretching before TMS in a randomized order. MEPs were collected in the non-dominant tibialis anterior muscle at 130% active motor threshold. Variability of MEP amplitude was quantified as coefficient of variation (CV). RESULTS: MEP CV was greater after no-task (25.4 ± 7.0) than after cognitive task (23.3 ± 7.2; p < 0.05), deep breathing (20.1 ± 6.3; p < 0.001), and static stretching (20.9 ± 6.0; p = 0.004). MEP CV was greater after cognitive task than after deep breathing (p = 0.007) and static stretching (p = 0.01). There was no effect of condition on MEP amplitude. CONCLUSIONS: Performing brief cognitive, voluntary breathing, and stretching tasks before TMS can reduce MEP variability with no effect on MEP amplitude in the tibialis anterior of healthy, young adults. Similar tasks could be incorporated into research and clinical settings to improve detection of changes, normative data, and clinical predictions.

Evaluation of Surface Topography of Heat Cure Acrylic Denture-base Resin before and after Reinforcement with Different Fibers Using Stylus-based Profilometer.

AIM: The aim of this in vitro study was to evaluate the effect of glass and nylon fiber reinforcement on surface topography of polymethyl methacrylate (PMMA) denture resin after polishing. MATERIALS AND METHODS: Stainless steel dies were used for preparation of specimens and were divided into three groups of 30 specimens each. Group A: Control group, Group B: PMMA reinforced with glass fibers, Group C: PMMA reinforced with nylon fibers. All specimens were finished and polished by a single operator to eliminate any inadvertent bias and ensure a constant pressure when polishing. The surface roughness of all the acrylic samples was measured with the help of profilometer (SURFCOM 130A). RESULTS: Glass-reinforced PMMA showed higher mean surface roughness (0.16817 µm) as compared to unreinforced PMMA (0.10203 µm). Nylon-reinforced PMMA showed lower mean surface roughness (Ra) of 0.09177 µm as compared to unreinforced PMMM (0.10203 µm). Glass-reinforced PMMA showed a higher mean surface roughness (Ra) of 0.16817 µm as compared to nylon PMMA (0.09177 µm). CONCLUSION: Reinforcement with glass and nylon fibers affects the surface roughness of the PMMA resin, i.e., glass fibers increase the surface roughness of PMMA resin, whereas nylon fibers slightly decrease the surface roughness of PMMA resin. Hence, the use of nylon fiber may be justified to obtain a denture with increased fracture resistance, acceptable esthetic properties, and better denture hygiene and plaque accumulation. CLINICAL SIGNIFICANCE: Two important parameters are essential for ensuring the durability of a restorative material, which include surface roughness and color stability. Surface roughness may be the major cause of discomfort for the patient and it may be associated with complications by promoting the deposition of biofilm and microbial growth. The use of nylon fiber increases fracture resistance and provides acceptable esthetic properties and better denture hygiene and plaque accumulation.

A Biomechanical Analysis of Shoulder Muscle Excursions During Abduction, After the Treatment of Massive Irreparable Rotator Cuff Tears Using Superior Capsular Reconstruction (SCR), Bursal Acromial Reconstruction (BAR), and SCR with BAR.

Introduction: Current understanding of the biomechanical effects of treatment options for irreparable rotator cuff (RC) tears is lacking. This study examines how shoulder muscle lengths and excursions are affected by superior capsular reconstruction (SCR), bursal acromial reconstruction (BAR), and SCR with BAR, following a complete supraspinatus tear. Method: Six fresh-frozen cadaveric shoulders were examined. Deltoid and RC muscle lengths were measured at 0, 30, 45, 60, and 90° of shoulder abduction under six conditions: (1) intact, (2) partially torn supraspinatus, (3) completely torn supraspinatus, (4) SCR, (5) SCR with BAR, and (6) BAR. Muscle excursions from 0-90° of abduction were then calculated. Results: Subscapularis muscle lengths after SCR, BAR, and SCR with BAR were significantly greater (post-hoc Tukey HSD test; p < .01) compared to the other conditions. Supraspinatus, infraspinatus, teres minor, and deltoid lengths were not significantly different (ANOVA test; p > .01) between the conditions. All muscle excursions remained statistically similar between the conditions (ANOVA test; p > .01). Conclusion: These findings demonstrate that the use of SCR, BAR, or SCR with BAR for a complete supraspinatus tear, may increase subscapularis muscle length while maintaining other shoulder muscle lengths. An increase in subscapularis length can allow for more effective subscapularis muscle strengthening and increased compensatory function in the long term. Additionally, all shoulder muscle excursions are preserved after partial or complete supraspinatus tears and after SCR, BAR, or SCR with BAR. Therefore, these surgical treatments can initially normalize shoulder muscle function during 0-90° of abduction, after an irreparable supraspinatus tear.

Understanding factors contributing to participant satisfaction in stroke walking recovery clinical trials.

Background: Individuals with stroke face a distinct set of challenges, barriers and facilitators that need to be understood to streamline efficacy of stroke clinical trials and improve participant retention. Few long-term stroke rehabilitation trials have evaluated participant perception of their laboratory experience. Methods: We collected data regarding trial satisfaction from 33 individuals with stroke who participated in 12 sessions of treadmill training which included pre, post and follow-up non-invasive brain stimulation and clinical assessments. We evaluated factors such as overall trial satisfaction, burden of testing, perceived benefits, perceived barriers, and perceived support using a participant satisfaction questionnaire (PSQ) that assessed participants' overall trial experience. Results: 97% of our participants found participating in the study to be rewarding and would recommend it to other persons with stroke. Transcranial magnetic stimulation (TMS) testing was found to be the major perceived burden of participation while travelling to the lab was found to be the major perceived barrier to participation. Significant correlations were found between various items of the PSQ and clinical assessments. Conclusions: This study helped us get a preliminary perspective into the benefits and barriers faced by persons with stroke enrolled in a 4-week long clinical trial. We observed that participant satisfaction was driven by various factors including functional status, personal relevance to the research, perceptive physical and mental health improvements, interaction with research personnel, and ease of testing protocols.

Motion capture evaluation of sagittal spino-pelvic biomechanics after lumbar spinal fusion.

PURPOSE: The spine and pelvis coexist as a dynamic linked system in which spinal and pelvic parameters are correlated. Investigation of this system can inform the understanding and treatment of spinal deformity. Here, we demonstrate the use of motion capture technology to measure spine biomechanical parameters using a novel testing apparatus. METHODS: Three complete cadaveric spines with skull and pelvis were mounted into a biomechanical testing apparatus. Each lumbar vertebra was monitored by motion capture cameras as the spines underwent maximal anterior and posterior pelvic tilts about two sagittal axes at a controlled speed and applied force. These axes were defined as the sacral axis which passes transversely through the ilium and S1, and the acetabular axis which passes transversely through both acetabula. The experiments were repeated after L4-L5 fusion, and then, after both L4-L5 and T12-S1 fusion with pedicle screw instrumentation. Data were collected for total range of motion and for coupled translation at each functional spinal unit (FSU). RESULTS: Total range of motion and coupled translation within functional spinal units (FSUs) was decreased after spinal fusion. The displacement of each individual FSU was captured and summarized along with the observed patterns under each experimental condition. CONCLUSION: Lumbar fusion decreases spinal motion in the sagittal plane in both overall ROM and individual coupled translations of lumbar vertebrae. This was demonstrated using motion capture technology which is useful for quantifying the translations of individual FSUs in a multisegmental spinal model.

Evaluation of rotator cuff abduction moment arms for superior capsular reconstruction and reverse total shoulder arthroplasty.

PURPOSE: The rotator cuff (RC) muscles contribute to dynamic stability and rotational actions of the glenohumeral joint. Moment arm can be used to demonstrate the potential work a muscle contributes to a musculoskeletal joint rotation. This study aimed to understand the moment arm contributions of the RC muscles and explore changes following a complete supraspinatus tear treated with either superior capsular reconstruction (SCR) or reverse total shoulder arthroplasty (rTSA). METHODS: Five fresh-frozen cadaveric specimens were prepared and mounted in an apparatus where each intact RC muscle was held in tension with a line of action toward its origin on the scapula. Mean moment arms for each muscle were determined experimentally based on Optotrak data collected during cadaveric shoulder arm abduction. RESULTS: Using ANOVA testing, our analysis demonstrated significant differences (p < 0.001) in infraspinatus and teres minor moment arms after rTSA compared to the intact shoulder model. After SCR, significant differences (p < 0.001) were seen in teres minor, with these differences being statistically similar to the changes seen in teres minor after rTSA. Subscapularis showed no significant difference in moment arm values between the models (p = 0.148). CONCLUSION: Our results illustrate that mean moment arms were preserved in the RC muscles after complete supraspinatus tear. This study also shows evidence that subscapularis function may be maintained after SCR or rTSA. After SCR, infraspinatus may maintain similar abduction ability compared to the anatomical shoulder, while teres minor ability may increase. Infraspinatus may have decreased abduction ability after rTSA while teres minor may have increased ability.

Suture Tape Augmentation Has No Effect on Anterior Tibial Translation, Gap Formation, or Load to Failure of Anterior Cruciate Ligament Repair: A Biomechanical Pilot Study.

PURPOSE: The purpose of our pilot study was to assess the effect of augmenting anterior cruciate ligament (ACL) repair with suture tape on biomechanical parameters including anterior tibial translation, gap formation, and load to failure. METHODS: Ten fresh-frozen nonpaired cadaveric knees were dissected, and baseline anterior-posterior stability of both ACL-intact and -deficient knees was obtained. The specimens were randomized to undergo ACL repair either with or without suture tape reinforcement, and anterior tibial translation, as well as gap formation, was measured after cyclic loading. Finally, all specimens were subjected to a single pullout force to determine maximum load to failure. We performed t test analysis to compare means between groups, and significance was defined as P < .05. RESULTS: On t test analysis, no statistically significant difference was found regarding anterior tibial translation between the ACL-intact group and either repair group or between the repair group without suture tape augmentation and the repair group with suture tape augmentation. No significant difference in gap formation was detected between the repair groups with and without suture tape augmentation at 100 cycles (1.25 mm vs 1.02 mm, P = .6), 250 cycles (2.87 mm vs 2.12 mm, P = .3), and 500 cycles (4.5 mm vs 4.55 mm, P = .5). The average load to failure of the repairs without suture tape augmentation was not significantly different from that of the repairs with suture tape augmentation (725.9 N vs 725.7 N, P = .99). CONCLUSIONS: In this pilot study, we did not identify a difference between ACL repairs with and without suture tape augmentation regarding anterior tibial translation, gap formation, or maximum load to failure. CLINICAL RELEVANCE: Treatment of ACL tears with primary ACL repair is a highly debated topic, and studies such as this study to further our understanding of the biomechanical properties of augmented ACL repairs are important for surgeons when deciding the best treatments for their patients.

Relationship between Nintendo's Wii balance board derived variables and clinical balance scores in individuals with stroke.

BACKGROUND: The Wii Balance Board (WBB) is widely studied as a balance testing platform and is reliable in detecting changes in the body's center of pressure (COP). However, the relationship between WBB derived measures and clinical tests of balance is currently unknown. RESEARCH QUESTION: To investigate the association between static and dynamic COP measures from the WBB with balance tests commonly used in chronic stroke. METHODS: This retrospective study included sixty-nine individuals with stroke who performed the Berg Balance Score (BBS), the Mini-BESTest and WBB assessments as a part of their baseline measurements. The WBB assessments included body weight symmetry and a dynamic target matching task that measured Reaction Time (RT) and Completion Time (CT). RESULTS: Body weight symmetry performed with eyes open was significantly different between participants who were classified as high and moderate balance using the Mini-BESTest (p = 0.03). A significant negative linear correlation was observed between the BBS and CT (rho = -0.29, p = 0.021) and between the Mini-BESTest and RT (rho=-0.246, p = 0.05). SIGNIFICANCE: We provide preliminary but weak evidence supporting the relationship between WBB derived variables in relevance to the BBS and Mini-BESTest. Further research is needed to fully understand the clinical utility of the WBB especially in a larger sample and to generalize these results to stroke survivors at all levels of ability.