RESUMO
Anti-inflammatory wound healing involves targeted drug delivery to the wound site using hydrogel materials to prolong drug effectiveness. In this work, hydrogel films were fabricated using carboxymethyl cellulose (CMC) and poly(vinyl alcohol) (PVA) crosslinked with citric acid (CA) and glutaraldehyde (GA) at different concentrations. The crosslinker densities were optimized with various CA (2-10% w/v) and GA (1-5% v/v) concentrations. The optimized crosslink densities in the hydrogel exhibited additional functional group peaks in the FT-IR spectra at 1740 cm-1 for the C=O stretching of the ester linkage in CA and at 1060 cm-1 for the C-O-C stretching of the ether group in GA. Significantly, the internal porous structures of hydrogel composite films improved density, swelling capacities, solubility percentage reduction, and decreased water retention capacities with optimized crosslinker densities. Therefore, these hydrogel composite films were utilized as drug carriers for controlled drug release within 24 h during medical treatment. Moreover, the hydrogel films demonstrated increased triamcinolone acetonide (TAA) absorption with higher crosslinker density, resulting in delayed drug release and improved TAA efficiency in anti-inflammatory activity. As a result, the modified hydrogel showed the capability of being an alternative material with enhanced anti-inflammatory efficiency with hydrogel films.
RESUMO
Cellulose from different species of bamboo (Thyrsostachys siamesi Gamble, Dendrocalamus sericeus Munro (DSM), Bambusa logispatha, and Bambusa sp.) was converted to cellulose nanocrystals (CNCs) by a chemical-mechanical method. First, bamboo fibers were pre-treated (removal of lignin and hemicellulose) to obtain cellulose. Next, the cellulose was hydrolyzed with sulfuric acid using ultrasonication to obtain CNCs. The diameters of CNCs are in the range of 11-375 nm. The CNCs from DSM showed the highest yield and crystallinity, which was chosen in the film fabrication. The plasticized cassava starch-based films with various amounts (0-0.6 g) of CNCs (from DSM) were prepared and characterized. As the number of CNCs in cassava starch-based films increased, water solubility and the water vapor permeability of CNCs decreased. In addition, the atomic force microscope of the nanocomposite films showed that CNC particles were dispersed uniformly on the surface of cassava starch-based film at 0.2 and 0.4 g content. However, the number of CNCs at 0.6 g resulted in more CNC agglomeration in cassava starch-based films. The 0.4 g CNC in cassava starch-based film was found to have the highest tensile strength (4.2 MPa). Cassava starch-incorporated CNCs from bamboo film can be applied as a biodegradable packaging material.
RESUMO
The nano-metal-treated PET films with anti-virus and anti-fogging ability were developed using sparking nano-metal particles of Ag, Zn, and Ti wires on polyethylene terephthalate (PET) films. Ag nanoparticles were detected on the PET surface, while a continuous aggregate morphology was observed with Zn and Ti sparking. The color of the Ag-PET films changed to brown with increasing repeat sparking times, but not with the Zn-PET and Ti-PET films. The water contact angle of the nano-metal-treated PET films decreased with increasing repeat sparking times. The RT-PCR anti-virus test confirmed the high anti-virus efficiency of the nano-metal-treated PET films due to the fine particle distribution, high polarity, and binding of the nano-metal ions to the coronavirus, which was destroyed by heat after UV irradiation. A highly transparent, anti-fogging, and anti-virus face shield was prepared using the Zn-PET film. Sparking was an effective technique to prepare the alternative anti-virus and anti-fogging films for medical biomaterial applications because of their low cost, convenience, and fast processing.