Trichloroacetic Acid - Historical Origins and Dental Applications.

The use of trichloroacetic acid in dentistry has been advocated by several authors in the last 50 years due to its action on invasive gingival tissues that are seen in the presence of cervical resorption or proximal cavities. Publications addressing this substance and its applications are completely silent regarding its historical evolution or make general claims regarding its original source without substantiation. This perspective will attempt to provide the missing links to this substance and its contemporary use in dentistry, specifically in Endodontics.

Micro-CT determination of the porosity of two tricalcium silicate sealers applied using three obturation techniques.

PURPOSE: Using X-ray micro-computed tomography (micro-CT), the aim of this study was to measure the porosity of two tricalcium silicate sealers (EndoSequence BC and NeoSealer Flo) applied using three obturation techniques (single-cone, warm-vertical, and cold-lateral) to six single-rooted human teeth. METHODS: Six extracted, single-rooted human teeth were shaped with ProTaper Next rotary files and obturated with EndoSequence BC or NeoSealer Flo sealers and gutta-percha (GP) using one of the three techniques above. Micro-CT was used to map the full length of the canals. Deep learning cross-sectional segmentation was used to analyze image slices of the apical (0-2 mm) and coronal (14-16 mm from the apex) regions (n = 230-261 per tooth) for the areas of GP and sealer, as well as porosity. Median (%) with interquartile range of porosity were calculated , and the results were statistically analyzed with the Kruskal-Wallis test. RESULTS: In the apical region, EndoSequence BC had significantly fewer pores than NeoSealer Flo with the single-cone obturation (% median-interquartile range, IQR: 0.00-1.62) and warm-vertical condensation (5.57-10.32) techniques, whereas in the coronal region, NeoSealer Flo had significantly fewer pores than EndoSequence BC with these two techniques (0.39-5.02) and (0.10-0.19), respectively. There was no significant difference in porosity between the two sealers for the cold-lateral condensation technique in both the apical and coronal regions. CONCLUSION: For optimal obturation, the choice of technique and sealer is critical.

Comparison of the effect of NaOCL, curcumin, and EDTA on differentiation, proliferation, and adhesion of dental pulp stem cells.

Introduction: This study examined the effect of 1.5% NaOCl, 17% EDTA, and curcumin on the proliferation, attachment, and differentiation of dental pulp stem cells (DPSCs) placed on the dentin specimens. Methods: MTT assay was performed to evaluate the proliferation of DPSCs on the dentin specimens treated with different concentrations of NaOCl, 17% EDTA, and curcumin (0.97-250 µM). Cell-adhering ability of DPSCs was tested via the LDH assay to calculate the attached DPSCs. In addition, the western blotting assay was performed to investigate the expression levels of fibronectin as a cell-adhesion marker and analyze the expressions level of differentiation markers, including DMP-1, OCN, ALP, and DSPP, to detect the odontogenic potential of hDPCs. Results: NaOCl had lower toxicity on DPSCs at lower concentrations (P < 0.001). The cytotoxicity of irrigants increased with increased dosage. The difference between the cell-adhesion ability of NaOCl and curcumin was not significant (∼4.4 MU/mL), whereas EDTA (∼3.8 MU/mL) exhibited the lowest release of LDH and less damage to hDPSCs. Regarding fibronectin expression, the pattern differed between irrigants in inducing cell adhesion. NaOCl increased fibronectin expression more than EDTA and curcumin. All the treated groups upregulated the expression of DSPP, DMP-1, OCN, and ALP compared to the control group, in which NaOCl showed a higher effect on the overexpression of differentiation markers. Conclusion: The results showed that all the tested irrigants could be used in regenerative endodontic treatment. However, as an herbal-based and biocompatible irrigant, curcumin exhibited fewer adverse effects than NaOCl and EDTA.

Use of micro-CT to examine effects of heat on coronal obturation.

PURPOSE: The aim of this study was to categorize the effects of heat on coronal obturation with gutta-percha and sealer using X-ray micro-computed tomography (micro-CT). METHODS: Ten single-rooted, extracted human teeth were shaped using ProTaper NEXT files to size X5 (#50/Taper 6%) with 2.5% NaOCl irrigation. A single ProTaper NEXT X5 gutta-percha point was then inserted with epoxy resin (AH Plus) or tricalcium silicate (EndoSequence BC) sealer (n = 5/group), and cut at the cemento-enamel junction. The teeth were scanned using micro-CT (SkyScan1272) to obtain 11 sagittal 2-D images. Three calibrated raters categorized the coronal 0.5 mm of the images into four categories: "swirled sealer and/or gutta-percha without voids" (I), "uniform voids and sealer/gutta-percha" (II), "non-uniform voids and sealer/gutta-percha" (III), and "swirled sealer and/or gutta-percha with voids" (IV). Intra-rater and inter-rater reliability were then calculated. Chi-square tests were conducted to determine the significance of differences in each category between sealers. RESULTS: The intra-class correlation coefficient was 0.55 (same rater/two different times) and Fleiss' kappa (different raters/same image) was 0.34. Categories I, II, III, and IV accounted for 16.4%, 4.2%, 30.3%, and 49.1% for AH Plus, and 6.7%, 4.2%, 27.3%, and 61.8% for EndoSequence BC, respectively. CONCLUSION: Category IV was most common and Category II the least common. Significant differences were evident between sealers for Category I (P < 0.01).

Tricalcium silicate cement sealers: Do the potential benefits of bioactivity justify the drawbacks?

BACKGROUND: Grossman described the ideal properties of root canal sealers. The International Organization for Standardization and American National Standards Institute and American Dental Association have codified some of his requirements in ISO 6876 and ANSI/ADA 57, respectively. In this narrative review, the authors combined the ideal Grossman properties and requirements of these standards, emphasizing the newer tricalcium silicate cement sealers. This chemical matrix for such sealers was developed on the basis of the success of bioactive mineral trioxide aggregate-type (tricalcium silicate cement) materials for enhanced sealing and bioactivity. METHODS: The authors searched the internet and databases using Medical Subject Heading terms and then conducted a narrative review of those articles involving the tricalcium silicate cement endodontic sealers. RESULTS: Ninety-four articles were identified that discussed tricalcium silicate cement sealers. Tricalcium silicate cement sealers are partially antimicrobial and have bioactivity, which may presage improved biological sealing of the root canal system. Most other properties of tricalcium silicate cement sealers are comparable with traditional root canal sealers. CONCLUSIONS: Within the limitations of this review, tricalcium silicate cement endodontic sealers met many of the criteria for ideal properties, such as placement, antimicrobial properties, and bioactivity, but limitations were noted in solubility, dimensional stability (shrinkage and expansion), and retrievability. PRACTICAL IMPLICATIONS: Tricalcium silicate-based cements have been commercialized as bioactive, bioceramic endodontic sealers. Warm, cold, and single-cone obturation techniques are usable, depending on the commercial product. Some sealers can cause discoloration and are not easily retrievable, particularly when used to completely obturate a canal.

Coronal and apical leakage among five endodontic sealers.

PURPOSE: The aim of this study was to use dye penetration to measure apical and coronal leakage simultaneously in single-canal teeth that had been treated endodontically using a single-cone obturation technique. METHODS: One hundred single-canal, extracted human teeth were cleaned and shaped with ProTaper NEXT rotary files to size-X5 (50/.06), then randomly assigned to five sealer groups for single-cone gutta-percha obturation. The teeth were soaked in 0.6% rhodamine B at 37°C for seven days, then the roots were ground mesiodistally and the maximum apical and coronal dye penetration was measured. Differences in leakage among the sealer groups were examined using the Kruskal-Wallis test. Pairwise comparisons were made using the Mann-Whitney test with Bonferroni correction. RESULTS: The mean values (mm) of dye penetration for AH Plus, Pulp Canal Sealer, NeoSEALER Flo, EndoSequence BC, and Super-Bond RC Sealer were 0.200, 0.300, 0.675, 0.850, and 0.900 apically, whereas 1.675, 2.075, 4.800, 6.500, and 4.125 coronally. Pairwise comparisons showed significant apical differences between AH Plus/Super-Bond RC Sealer (P = 0.047) and significant coronal differences between AH Plus/NeoSEALER Flo (P = 0.001), AH Plus/EndoSequence BC (P < 0.01), AH Plus/Super-Bond RC Sealer (P < 0.01), Pulp Canal Sealer/NeoSEALER Flo (P = 0.010), Pulp Canal Sealer/EndoSequence BC (P < 0.01), and Pulp Canal Sealer/Super-Bond RC Sealer (P < 0.01). CONCLUSION: Coronal leakage was worse than apical leakage for all sealers. AH Plus exhibited the least leakage apically and coronally; Super-Bond RC Sealer showed the most leakage apically, and EndoSequence BC showed the most leakage coronally.

Micro CT pilot evaluation of removability of two endodontic sealers.

PURPOSE: This study compared the removability of AH Plus and EndoSequence BC sealers using in vitro micro-computed tomography. METHODS: Ten single-canal, extracted human teeth were cleaned and shaped with ProTaper NEXT rotary files to size X5 (50/0.06) (Dentsply-Sirona). Canals were obturated with a single cone gutta-percha and either AH Plus (Dentsply-Sirona) (Group A) or EndoSequence BC (Brasseler) (Group B). ProTaper Universal Retreatment files (Dentsply-Sirona) were used to remove obturation materials after 90 days at 37oC/100% humidity. Each tooth was scanned using micro-computed tomography (SkyScan 1272; Bruker) at an isotropic resolution of 6 µm from which the percent of material removed was calculated. Two-sample t-tests and one-way ANOVA were used for analysis. RESULTS: The percent removal of materials in the coronal third was 92.9% ± 7.3% (Group A) and 93.2% ± 6.1% (Group B). Removal in the middle third was 94.9% ± 8.5% (Group A) and 96.5% ± 6.1% (Group B). Apical third removal was 76.2% ± 27.9% (Group A) and 70.1% ± 30.8% (Group B). No statistically significant differences were determined between the two sealers or among the sectional thirds within each group (P > 0.05). CONCLUSION: AH Plus and EndoSequence BC sealers exhibit the same removability at all canal levels of 70% to 96%, with better removal coronally.

Micro-computed tomographic evaluation of single-cone obturation with three sealers.

OBJECTIVES: This study used micro-computed tomography (µCT) to compare voids and interfaces in single-cone obturation among AH Plus, EndoSequence BC, and prototype surface pre-reacted glass ionomer (S-PRG) sealers and to determine the percentage of sealer contact at the dentin and gutta-percha (GP) interfaces. MATERIALS AND METHODS: Fifteen single-rooted human teeth were shaped using ProTaper NEXT size X5 rotary files using 2.5% NaOCl irrigation. Roots were obturated with a single-cone ProTaper NEXT GP point X5 with AH Plus, EndoSequence BC, or prototype S-PRG sealer (n = 5/group). RESULTS: The volumes of GP, sealer, and voids were measured in the region of 0-2, 2-4, 4-6, and 6-8 mm from the apex, using image analysis of sagittal µCT scans. GP volume percentages were: AH Plus (75.5%), EndoSequence BC (87.3%), and prototype S-PRG (94.4%). Sealer volume percentages were less: AH Plus (14.3%), EndoSequence BC (6.8%), and prototype S-PRG (4.6%). Void percentages were AH Plus (10.1%), EndoSequence BC (5.9%), and prototype S-PRG (1.0%). Dentin-sealer contact ratios of AH Plus, EndoSequence BC, and prototype S-PRG groups were 82.4% ± 6.8%, 71.6% ± 25.3%, and 70.2% ± 9.4%, respectively. GP-sealer contact ratios of AH Plus, EndoSequence BC, and prototype S-PRG groups were 65.6% ± 29.1%, 80.7% ± 25.8%, and 87.0% ± 8.6%, respectively. CONCLUSIONS: Prototype S-PRG sealer created a low-void obturation, similar to EndoSequence BC sealer with similar dentin-sealer contact (> 70%) and GP-sealer contact (> 80%). Prototype S-PRG sealer presented comparable filling quality to EndoSequence BC sealer.

Ion Release From Prototype Surface Pre-Reacted Glass Ionomer (S-PRG) Sealer and EndoSequence BC Sealer.

OBJECTIVE: Bioactive ions, when incorporated in an endodontic sealer, can contribute to the long-term success of endodontic therapy by combating the re-infection of a tooth and promoting the healing of the periapical bone. The objective of this study was to measure the release of boron, strontium, and silicon ions from surface pre-reacted glass ionomer (S-PRG) filler containing prototype endodontic sealer over a sustained period in comparison to EndoSequence BC sealer in a simulated clinical model using extracted human teeth in vitro. METHODS: Twelve extracted human anterior teeth were instrumented using ProTaper Next (Dentsply Sirona, Johnson City, TN, USA) files up to size X3 (#30/variable taper) with copious 2.5% NaOCl irrigation. Teeth were obturated using a single-cone technique with a matching size tapered gutta-percha point and one of two endodontic sealers: prototype S-PRG (Shofu Inc., Kyoto, Japan) or EndoSequence BC (Brasseler, Savannah, GA, USA). The teeth were soaked in phosphate-buffered saline (PBS) solution for 336 hours. Periodically, 1-mL samples of the PBS were analyzed via an inductively coupled plasma mass spectrometer to determine the concentrations of ions released by the sealers. RESULTS: The average (S.D.) cumulative release (ng/ml) of boron, silicon, and strontium ions over 2 weeks for the prototype S-PRG sealer was 8614.9 (1264.3), 35758.9 (5986.5), and 3965.2 (145.6), and for EndoSequence BC sealer was 1860.5 (82.7), 164648.7 (16468.1), and 227.7 (4.7). Generalized linear mixed model analysis showed significant differences in ion concentration among boron, silicon, and strontium over time between the two sealer groups (Boron: P<0.0001, Silicon: P=0.010, Strontium: P=0.028). Of the three ions, strontium had the lowest amount of release for both sealers. The prototype S-PRG sealer showed a rapid initial burst followed by a slow, continuous release of strontium ions. CONCLUSION: The prototype S-PRG sealer released boron and strontium ions in higher cumulative concentrations over 2 weeks compared to the EndoSequence BC sealer. Both the prototype S-PRG and EndoSequence BC sealers released silicon ions, although significantly more were eluted from the EndoSequence BC sealer. Antimicrobial and osteogenic ion release from sealers is expected to positively influence the post-treatment control of microbial infections to improve periapical healing.

Comprehensive review of current endodontic sealers.

Endodontic sealers for non-surgical root canal treatment (NSRCT) span many compositions and attributes. This comprehensive review discusses current types of endodontic sealers by their setting reaction type, composition, and properties: zinc oxide-eugenol, salicylate, fatty acid, glass ionomer, silicone, epoxy resin, tricalcium silicate, and methacrylate resin sealers. Setting time, solubility, sealing ability, antimicrobial, biocompatibility, and cytotoxicity are all aspects key to the performance of endodontic sealers. Because sealing ability is so important to successful outcomes, the relative degree of microleakage among all the relevant sealers was calculated by way of a meta-analysis of relevant literature. Compared to AH Plus, tricalcium silicate sealers show the lowest relative microleakage among the sealers assessed, followed by silicone sealers and other non-AH Plus epoxy resin sealers. Tricalcium silicate sealers also exhibit the most favorable antimicrobial effect and excellent biocompatibility. Future sealers developed should ideally combine a hermetic seal with therapeutic effects.

Bioactive tri/dicalcium silicate cements for treatment of pulpal and periapical tissues.

Over 2500 articles and 200 reviews have been published on the bioactive tri/dicalcium silicate dental materials. The indications have expanded since their introduction in the 1990s from endodontic restorative and pulpal treatments to endodontic sealing and obturation. Bioactive ceramics, based on tri/dicalcium silicate cements, are now an indispensable part of the contemporary dental armamentarium for specialists including endodontists, pediatric dentists, oral surgeons andfor general dentists. This review emphasizes research on how these materials have conformed to international standards for dental materials ranging from biocompatibility (ISO 7405) to conformance as root canal sealers (ISO 6876). Potential future developments of alternative hydraulic materials were included. This review provides accurate materials science information on these important materials. STATEMENT OF SIGNIFICANCE: The broadening indications and the proliferation of tri/dicalcium silicate-based products make this relatively new dental material important for all dentists and biomaterials scientists. Presenting the variations in compositions, properties, indications and clinical performance enable clinicians to choose the material most suitable for their cases. Researchers may expand their bioactive investigations to further validate and improve materials and outcomes.

Acidic and alkaline chemicals' influence on a tricalcium silicate-based dental biomaterial.

Bioactive hydraulic tricalcium silicate materials are commonly used in several dental procedures. Mineral Trioxide Aggregate (MTA) is one such material, which is used in a variety of clinical applications, the most recent of which is root canal sealing material, during which, the MTA potentially comes in contact with remnants of the chemical agents used for disinfecting root canals. The effects of commonly used root canal irrigating solutions on MTA have not been investigated in depth, thus far. The aim of this study was to determine the effect of five common chemical agents used in root canal preparation (sodium hypochlorite/NaOCl, ethylene diaminetetraacetic acid/EDTA, mixture of sodium hypochlorite and etidronic acid/NaOCl + EA, mixture of EDTA and Chlorhexidine/QMix, or saline) on a commercial tricalcium silicate (MTA Plus). Samples were analyzed using scanning electron microscopy with energy dispersive spectroscopy, X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy and Inductively coupled plasma techniques to see effects of phases formed and calcium ion release. Specimens immersed in NaOCl and NaOCl + EA had strong peaks for calcium hydroxide, but materials exposed to EDTA and QMix had lesser XRD peaks for calcium hydroxide. The calcium hydroxide peak in the XRD indicates hydration of tricalcium silicate and formation of amorphous calcium silicate hydrate. Calcium released from samples immersed in EDTA and NaOCl was less than in NaOCl + EA and QMix solutions. Fewer calcium phosphate crystals and less calcium hydroxide were observed with the samples in NaOCl, EDTA and QMix, which could have an important impact as it negatively influences the bioactivity. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 107B: 377-387, 2019.

Histology of NeoMTA Plus and Quick-Set2 in Contact with Pulp and Periradicular Tissues in a Canine Model.

INTRODUCTION: NeoMTA Plus (Avalon Biomed Inc, Bradenton, FL) is a tricalcium silicate material similar to the first mineral trioxide aggregate product, ProRoot MTA (Dentsply Sirona, York, PA), but with improvements such as decreased setting time, increased ion release, increased water sorption, and nonstaining radiopacifiers. Quick-Set2 (Avalon Biomed Inc) is a newly formulated calcium aluminosilicate material that has a faster setting time and increased acid resistance and is nonstaining. The purpose of this study was to compare the healing of pulpal and periapical tissues in dogs after exposure to NeoMTA Plus and Quick-Set2 after pulpotomy and root-end surgery procedures. METHODS: Seventy-two teeth (36 for each procedure) in 6 beagle dogs received pulpotomy or root-end surgery using either NeoMTA Plus or Quick-Set2. The dogs were sacrificed at 90 days, and the teeth and surrounding tissues were prepared for histologic evaluation. Sixty teeth were evaluated and scored histologically (29 with pulpotomies and 31 with root-end resections). Specimens were scored for inflammation, quality and thickness of dentin bridging, pulp tissue response, cementum and periodontal ligament formation, and apical bone healing. RESULTS: Both materials displayed favorable healing at 90 days. The only significant difference was the quality of dentin bridge formation in pulpotomies using NeoMTA Plus compared with Quick-Set2. CONCLUSIONS: Quick-Set2 and NeoMTA Plus had similar effects on inflammation, pulp response, periodontal ligament and cementum formation, and apical tissue healing in dogs. NeoMTA Plus had superior dentin bridge quality compared with Quick-Set2.

Mineralogenic characteristics of osteogenic lineage-committed human dental pulp stem cells following their exposure to a discoloration-free calcium aluminosilicate cement.

OBJECTIVES: An experimental discoloration-free calcium aluminosilicate cement has been developed with the intention of maximizing the beneficial attributes of tricalcium silicate cements and calcium aluminate cements. The present study examined the effects of this experimental cement (Quick-Set2) on the mineralogenic characteristics of osteogenic lineage-committed human dental pulp stem cells (hDPSCs), by comparing the cellular responses with a commercially available tricalcium silicate cement (white mineral trioxide aggregate (ProRoot(®) MTA); WMTA). METHODS: The osteogenic potential of hDPSCs exposed to the cements was examined using qRT-PCR for osteogenic gene expressions, Western blot for osteogenic-related protein expressions, alkaline phosphatase enzyme activity, Alizarin red S staining, Fourier transform infrared spectroscopy and transmission electron microscopy of extracellular calcium deposits. RESULTS: Results of the six assays indicated that osteogenic differentiation of hDPSCs was significantly enhanced after exposure to the tricalcium silicate cement or the experimental calcium aluminosilicate cement, with the former demonstrating better mineralogenic stimulation capacity. SIGNIFICANCE: The better osteogenic stimulating effect of the tricalcium silicate cement on hDPSCs may be due to its relatively higher silicate content, or higher OH(-) and Ca(2+) release. Further investigations with the use of in vivo animal models are required to validate the potential augmenting osteogenic effects of the experimental discoloration-free calcium aluminosilicate cement.

Dentinal Tubule Penetration of Tricalcium Silicate Sealers.

INTRODUCTION: The treatments for which mineral trioxide aggregate (MTA)-based materials can be used in dentistry are expanding. Smaller particle size and easier handling properties have allowed the advent of tricalcium silicate sealers including EndoSequence BC Sealer (Brasseler USA, Savannah, GA), QuickSet2 (Avalon Biomed, Bradenton, FL), NeoMTA Plus (Avalon Biomed), and MTA Fillapex (Angelus, Londrina, Brazil). The objective of this study was to measure the tubule penetration with these sealers using continuous wave (CW) and single-cone (SC) obturation techniques. METHODS: Eighty single-rooted teeth were randomly divided into 8 groups of 10 and obturated with 1 of the previously mentioned sealers mixed with trace amounts of rhodamine using either the CW or SC technique. Teeth were sectioned at 1 mm and 5 mm from the apex and examined under a confocal laser microscope. The percentage of sealer penetration and the maximum sealer penetration were measured. RESULTS: The tricalcium silicate sealers penetrated tubules as deep as 2000 µm (2 mm). The percentage of sealer penetration was much higher 5 mm from the apex, with many specimens having 100% penetration for both SC and warm vertical techniques. MTA Fillapex, a resin-based sealer with less than 20% MTA particles, had significantly greater tubule penetration with a warm vertical technique versus the SC technique at the 1-mm level. CONCLUSIONS: Within the limitations of this study, the CW and SC techniques produced similar tubule penetration at both the 1-mm and the 5-mm level with the tricalcium silicate sealers BC Sealer, QuickSet2, and NeoMTA Plus.

Effects of a discoloration-resistant calcium aluminosilicate cement on the viability and proliferation of undifferentiated human dental pulp stem cells.

Discoloration-resistant calcium aluminosilicate cement has been formulated to overcome the timely problem of tooth discoloration reported in the clinical application of bismuth oxide-containing hydraulic cements. The present study examined the effects of this experimental cement (Quick-Set2) on the viability and proliferation of human dental pulp stem cells (hDPSCs) by comparing the cellular responses with commercially available calcium silicate cement (white mineral trioxide aggregate; WMTA) after different aging periods. Cell viability and proliferation were examined using assays that examined plasma membrane integrity, leakage of cytosolic enzyme, caspase-3 activity for early apoptosis, oxidative stress, mitochondrial metabolic activity and intracellular DNA content. Results of the six assays indicated that both Quick-Set2 and WMTA were initially cytotoxic to hDPSCs after setting for 24 h, with Quick-Set2 being comparatively less cytotoxic than WMTA at this stage. After two aging cycles, the cytotoxicity profiles of the two hydraulic cements were not significantly different and were much less cytotoxic than the positive control (zinc oxide-eugenol cement). Based on these results, it is envisaged that any potential beneficial effect of the discoloration-resistant calcium aluminosilicate cement on osteogenesis by differentiated hDPSCs is more likely to be revealed after outward diffusion and removal of its cytotoxic components.

Histologic Assessment of Quick-Set and Mineral Trioxide Aggregate Pulpotomies in a Canine Model.

INTRODUCTION: Quick-Set (Primus Consulting, Bradenton, FL) is a calcium aluminosilicate cement that is a potential alternative to mineral trioxide aggregate (MTA) with greater acid resistance and faster setting. The purpose of this study was to compare the effects of Quick-Set and MTA on pulpal tissues in response to pulpotomy procedures. METHODS: The pulp chambers of 42 maxillary teeth in 7 beagle dogs were accessed, and the coronal pulpal tissue was removed. Pulpotomy procedures were performed, placing the experimental materials directly over the radicular pulp tissues. The dogs were sacrificed at 70 days, and the teeth and surrounding tissues were removed and prepared for histologic analysis. The sections of the pulpotomy areas were scored for inflammation, pulp tissue organization, reactionary dentin formation, and quality of dentinogenesis. RESULTS: The Quick-Set group exhibited significantly more pulpal inflammation (P = .002) and significantly less pulp tissue organization (P = .004). No significant difference was noted for reactionary dentin formation (P = .526) and quality of dentinogenesis (P = .436). CONCLUSIONS: Compared with ProRoot White MTA (Dentsply Tulsa Dental Specialties, Tulsa, OK), Quick-Set exhibited more pulpal inflammation and decreased pulp tissue organization. No significant differences were noted for reactionary dentin formation and quality of dentinogenesis.

Comparison of Quick-Set and mineral trioxide aggregate root-end fillings for the regeneration of apical tissues in dogs.

INTRODUCTION: Quick-Set (Avalon Biomed Inc, Bradenton, FL) is a calcium aluminosilicate cement that is a potential alternative to mineral trioxide aggregate (MTA) with greater acid resistance and faster setting. The purpose of this study was to compare the regeneration of apical tissues after root-end surgery when the apical tissues were exposed to Quick-Set or White ProRoot MTA (Dentsply Tulsa Dental Specialties, Tulsa, OK) by root-end resection. METHODS: The root canals of 42 mandibular premolars in 7 beagle dogs were accessed, cleaned and shaped, and obturated with Quick-Set or white MTA. Osteotomies and root-end resections were performed immediately. The dogs were sacrificed at 90 days, and the teeth and surrounding tissues were removed and prepared for histologic analysis. The sections of the apical areas were scored for inflammation, new cementum formation, periodontal ligament formation, and bone quality. RESULTS: At 90 days, both materials supported some degree of cementum formation on the surface of the material, periodontal ligament regeneration, and excellent bone quality. The only significant difference was greater inflammation found in the Quick-Set group. CONCLUSIONS: Quick-Set and White ProRoot MTA had a similar effect on bone quality, cementum formation, and periodontal ligament formation after root-end surgery in dogs. Quick-Set was associated with greater inflammation.

Microfibrous borate bioactive glass dressing sequesters bone-bound bisphosphonate in the presence of simulated body fluid.

Ion exchange occurs between borate bioactive glass and simulated body fluid. Borate bioactive glass dressings may be used for managing bisphosphonate-related osteonecrosis of the jaw through the formation of a complex incorporating leached calcium and borate ions and sequestered bone-bound bisphosphonates.

Ion release, porosity, solubility, and bioactivity of MTA Plus tricalcium silicate.

INTRODUCTION: The aim of this study was to evaluate MTA Plus (Prevest Denpro Limited, Jammu, India, for Avalon Biomed Inc) material's properties, namely calcium release, the pH change, solubility, water sorption, porosity, surface morphology, and apatite-forming ability after immersion in simulated body fluid. METHODS: Two tricalcium silicate powders (MTA Plus and ProRoot MTA; Dentsply Tulsa Specialties, Tulsa, OK) and Dycal (Dentsply Caulk, Milford, DE) were tested. After incubation at 37°C and 99% relative humidity, calcium and hydroxyl ion release were tested up to 28 days in deionized water at 37°C. Water absorption, interconnected pores, apparent porosity, and solubility were measured after 24 hours of immersion in deionized water at 37°C. The morphologic and elemental analysis of the materials' surfaces were examined using an environmental scanning electron microscope/energy dispersive x-ray analysis after storage at 37°C for 1-28 days in simulated body fluid using the ISO 23317 method. RESULTS: All 3 materials created an alkaline pH within 3 hours, which continued for 28 days. MTA Plus had a higher ion release than ProRoot MTA and Dycal; the use of the MTA Plus gel enhanced the initial calcium release and the increase of the pH. Both MTA materials were more porous, water soluble, and water sorptive than Dycal and more bioactive. After aging in simulated body fluid, MTA Plus material caused precipitation of an apparent calcium phosphate layer. CONCLUSIONS: MTA Plus showed improved reactivity and prolonged capability to release calcium and increase the local pH to alkaline values in comparison with ProRoot MTA. These pronounced ion-releasing properties are interlinked with its noticeable porosity, water sorption, and solubility and with the formation of calcium phosphorus minerals. The finer calcium silicate powder may explain the higher ion release, water sorption, porosity, and solubility of MTA Plus compared with ProRoot MTA. For clinicians, MTA Plus represents a lower-cost bioactive tricalcium silicate material with interesting chemical-physical properties that could be a convenient alternative to the conventional calcium silicate mineral trioxide aggregate-like cements.