From molecules to organisms: A multi-level approach shows negative effects of trace elements from sewage sludge used as soil improver on honeybees.

The use of sewage sludge as a soil improver has been promoted in agroecosystems. However, sludges can contain toxic trace elements because of suboptimal wastewater treatment. Nonetheless, field studies investigating the negative effects of these practices on pollinators are lacking. We collected honeybees from an area where sewage sludge use is widespread, and one where it is precluded. Trace elements in soils and bees were quantified. Cadmium, chromium, lead, mercury, and nickel were investigated because they were the least correlated elements to each other and are known to be toxic. Their levels were related to oxidative stress and energy biomarkers, midgut epithelial health, body size and wing asymmetry of honeybees. We found increased carbohydrate content in sites with higher cadmium levels, increased histological damage to the midgut epithelium in the sewage sludge area, and the presence of dark spherites in the epithelium of bees collected from the sites with the highest lead levels. Finally, we found that honeybees with the highest lead content were smaller, and that wing fluctuating asymmetry increased in sites with increasing levels of mercury. To the best of our knowledge, this is the first comprehensive study of the concentration and effects on honeybees of trace elements potentially deriving from soil amendment practices.

Synthesis of Carbon Nitride Polymorphs by Sacrificial Template Method: Correlation between Physicochemical Properties and Photocatalytic Performance.

Carbon nitride compounds (CNCs) in the form of graphitic carbon nitride (g-C3N4) and poly(heptazine imide) were synthesized using different metal chloride salts (MClx), i.e., NaCl, KCl and CaCl2, as sacrificial templates and by varying the MClx to melamine molar ratios. A systematic study of their photocatalytic activity for H2 production in relation to the physicochemical, morphological, and optical properties was carried out. Each sample was tested achieving the highest hydrogen evolution rates of about 7660 µmol g-1 h-1, 5380 µmol g-1 h-1 and 3140 µmol g-1 h-1 using CaCl2, KCl, and NaCl, respectively. This work demonstrates how the synthesis of CNCs with different MClx leads to the production of high-performance photocatalysts due to a combination of factors as the formation of vacancies or cyano groups, a shift in the optical threshold and tuning of micro(nano)structure.  The results demonstrate that, when CaCl2 is used as a sacrificial template, porous and exfoliated g-C3N4 nanosheets are formed leading to hydrogen productions which outperform most of the previously reported g-C3N4 prepared using a single synthetic step.

Sexual hormones monitoring in surface waters and wastewaters from Northern Italy by thin film microextraction coupled with HPLC-MS/MS.

The occurrence of sex steroid hormones, viz. oestrogens and progestins, in aquatic ecosystems is of global concern due to their role as endocrine disrupting chemicals, even at low concentration (µg L-1 or less). Thus, it is essential to monitor these organic pollutants to get a realistic picture of their presence and to control their contamination levels in environmental water bodies. In this respect, we have explored the use of self-prepared polymeric films as novel sorptive phase for the microextraction of 17ß-estradiol, 17α-ethinylestradiol, estrone, progesterone, medroxyprogesterone acetate and hydroxyprogesterone. The thin film microextraction procedure has been developed, evaluating different film compositions, sample volumes and elution conditions to recover the sorbed analytes. The overall method provides good reproducibility (RSD < 12%) and recoveries higher than 60%. The final method has been applied to environmental monitoring in surface waters (river and lake samples) and urban wastewater treatment plant effluents and influents from Northern Italy, to get a contamination snapshot of this highly urbanized area.

Photodegradation of cannabidiol (CBD) and Δ9-THC in cannabis plant material.

Δ9-THC, the psychotropic cannabinoid in Cannabis sativa L., for many years has been the focus of all the pharmacological attention as the main promising principle of the plant. Recently, however, cannabidiol (CBD) has brought a sudden change in the scenario, exponentially increasing the interest in pharmacology as the main non-psychotropic cannabinoid with potential therapeutic, cosmetical and clinical applications. Although the reactivity of CBD and Δ9-THC has been considered, little attention has been paid to the possible photodegradation of these cannabinoids in the vegetal matrix and the data available in the literature are, in some cases, contradictory. The aim of the present work is to provide a characterization of the photochemical behaviour of CBD and Δ9-THC in three cannabis chemotypes, namely I (Δ9-THC 2.50%w/w), II (CBD:Δ9-THC 5.82%w/w:3.19%w/w) and III (CBD 3.02%w/w).

Biochar-based polymeric film as sustainable and efficient sorptive phase for preconcentration of steroid hormones in environmental waters and wastewaters.

BACKGROUND: The environmental impact of sample preparation should be minimized through simplification of the procedures and the use of natural, renewable and/or reusable materials. In such scenario, thin-film microextraction fulfils the former criteria, as it enables few steps and miniaturization, thus small amount of extraction phase. At the same time, the use of sorbents such as biochars obtained from biomass waste is even more promoted due to their availability at low cost and increased life-cycle in a circular economy vision. However, it is not always easy to combine these criteria in sample preparation. RESULTS: A thin film microextraction was developed for the determination of steroids in aqueous samples, entailing a membrane made of cellulose triacetate and a wood-derived biochar (Nuchar®) as carbon precursor. Different characterization techniques showed the successful preparation, whereas the sorption kinetics experiments demonstrated that biochar is responsible for the extraction with the polymer acting as a smart support. After a study about membranes' composition in terms of biochar amounts (4 %, 10 %, 16 % wt) and type of synthesis set up, the ceramic 3D-mold was selected, achieving reproducible and ready-to-use membranes with composition fixed as 10 %. Different elution conditions, viz. type and time of agitation, type, composition and volume of eluent, were evaluated. The final microextraction followed by HPLC-MS/MS quantification was successfully validated in river and wastewater treatment plant effluent samples in terms of accuracy (R% 64-123 %, RSD<19 % in river; R% 61-118 %, RSD <18 % in effluent, n = 4), sensitivity (MQLs 0.2-8.5 ng L-1) and robustness. SIGNIFICANCE: This novel biochar-based polymeric film proved to be a valid and sustainable sorbent, in terms of extraction capability, ease of preparation and greenness. By comparison with literature and the greenness evaluation with the most recent metric tools, this method expands the potential applicability of the thin-film microextraction and opens up innovative scenarios for sustainable procedures entailing the use of biochars entrapped in bio-polymers.

Pervasiveness of inorganic gunshot residue (IGSR) in handguns after cleaning and conditioning procedures.

Memory effect in firearms that is, the possibility for a weapon to release inorganic particles whose elemental composition depends on its entire shooting history, is responsible for most of the interpretation difficulties encountered in forensic gunshot residue analysis. The presence of residues chemically inconsistent with the last discharged round, the creation of particles having unusual elemental profiles, and the dependence of residue population composition on the collection point are all manifestations of memory effect. The experimental results reported in this paper highlight the ineffectiveness of a wide number of gun cleaning procedures in reducing memory effect. Moreover, the common alternative of discharging batches of rounds having a "new" primer mixture does not fully eliminate the possibility to recover "old" residues at least from the shooter's hands. Two brand new pistols and ammunition having lead-based, leadless and heavy metal free primers were used. Specimens, collected both from the shooters' hands and from cotton targets set nearby the gun muzzle, were analyzed by SEM-EDS and by ICP-OES. After discharging 10's of new ammunitions, the number of old residues ejected from the gun muzzle indeed showed an asymptotic decrease to zero. In spite of this, the number of old residues recovered from the shooter's hands did not follow any predictable trend. These different behaviors suggest that all internal components of a gun, and not just the barrel, play a role in memory effect.

Molecularly Imprinted Polymer-based voltammetric sensor for amino acids/indazole derivatives synthetic cannabinoids detection.

BACKGROUND: Synthetic cannabinoids (SCs) are a broad class of illicit drugs that are classified according to the chemical structure of the aromatic core that they present (i.e., indole, imidazole, pyrrole) and their detection is still a challenge, despite their widespread diffusion. The identification of a specific class of SC in complex matrices, such as real samples with a rapid, economic analytical device useable directly in the field, is highly desirable, as it can provide immediate and reliable information that eventually addresses more targeted analyses. RESULTS: The present paper proposes a Molecularly Imprinted Polymer (MIP)-based voltammetric sensor for the rapid and selective detection of indazole-type SCs. In this context, a polyacrylate-based MIP was used to functionalize a Pt electrode. The MIP composition was optimized through a Design of Experiments approach, and for the sake of safety, a non-psychotropic compound structurally related to the selected SCs was employed as the template in the MIP formulation. A complete characterization of the electrochemical behavior of the selected SCs was performed, and differential pulse voltammetry (DPV) in acetonitrile/lithium perchlorate 0.1 M was the technique applied for their quantification. LOD around 0.01 mM and linearity up to 0.8 mM were found. Comparison with the non-imprinted (NIP) modified and bare electrodes showed better selectivity and reproducibility of the MIP-based sensor. Recovery tests (in the 70-115 % range) were performed on simulated pills and smoking mixtures to test the reliability of the proposed method. SIGNIFICANCE: The method proposed allows the identification and quantification of indazole-based SCs as a class in complex matrices. Due to the selectivity of the obtained device, no clean-up of the sample before analyses is needed. For the same reason, the interference of cutting substances and natural cannabinoids was negligible.

Air- and water-stable and photocatalytically active germanium-based 2D perovskites by organic spacer engineering.

There is increasing interest in the role of metal halide perovskites for heterogeneous catalysis. Here, we report a Ge-based 2D perovskite material that shows intrinsic water stability realized through organic cation engineering. Incorporating 4-phenylbenzilammonium (PhBz) we demonstrate, by means of extended experimental and computational results, that PhBz2GeBr4 and PhBz2GeI4 can achieve relevant air and water stability. The creation of composites embedding graphitic carbon nitride (g-C3N4) allows a proof of concept for light-induced hydrogen evolution in an aqueous environment by 2D Ge-based perovskites thanks to the effective charge transfer at the heterojunction between the two semiconductors.

Multiclass ultrasound-assisted extraction, clean-up and high performance liquid chromatography-tandem mass spectrometry quantification of steroid hormone residues in compost.

An analytical method for multiclass determination of steroid hormones in compost has been developed to fill the lack of methods for steroid residuals monitoring in this waste-derived product, increasingly produced and recycled in the circular-economy approach. The procedure simply entails an ultrasound-assisted extraction (UAE) on 300 mg compost by 3 × 2.5 mL methanol × 5 min sonication steps followed by a quick clean-up by solid-phase extraction (SPE) on the silica-based Supelclean™ LC-NH2 that avoids use of organic solvents. The clean extract is analysed by HPLC-MS/MS achieving firm identification and quantitation of the 16 steroids, i.e., glucocorticoids, progestins, androgens, oestrogens. The analytical figures of merits were assessed, viz. selectivity, sensitivity, linearity, matrix effect, trueness, precision, carry-over and robustness, in line with updated guidelines. Recovery was investigated in the concentration range 15-800 ng g-1, and at the quality control levels (15, 50, 200 and 400 ng g-1) was in the range 60-120%, with inter-day precision RSDs < 20% (n = 3). The experimental quantification limit was 15 ng g-1 for all the hormones. The method was applied to analysis of different compost samples proving to be functional to environmental monitoring.

From Rice Husk Ash to Silica-Supported Carbon Nanomaterials: Characterization and Analytical Application for Pre-Concentration of Steroid Hormones from Environmental Waters.

Rice husk (RH) in the rice industry is often air-burnt to obtain energy in the form of heat and RH ash (RHA) residue. In this work, RHA was applied as a starting material to obtain silica-supported carbon nanomaterials, resulting in a new reuse of a globally produced industrial waste product, in a circular economy approach. The preparation involves ultrasound-assisted one-pot oxidation with a sulfonitric mixture followed by wet oven treatment in a closed vessel. A study of oxidation times and RHA amount/acid volume ratio led to a solid material (nC-RHA@SiO2) and a solution containing silica-supported carbon quantum dots (CQD-RHA@SiO2). TEM analyses evidenced that nC-RHA@SiO2 consists of nanoparticle aggregates, while CQD-RHA@SiO2 are carbon-coated spherical silica nanoparticles. The presence of oxygenated carbon functional groups, highlighted by XPS analyses, makes these materials suitable for a wide range of analytical applications. As the main product, nC-RHA@SiO2 was tested for its affinity towards steroid hormones. Solid-phase extractions were carried out on environmental waters for the determination of target analytes at different concentrations (10, 50, and 200 ng L−1), achieving quantitative adsorption and recoveries (RSD < 20%, n = 3). The method was successfully employed for monitoring lake, river, and wastewater treatment plant water samples collected in Northern Italy.

Preparation of Heterojunctions Based on Cs3Bi2Br9 Nanocrystals and g-C3N4 Nanosheets for Photocatalytic Hydrogen Evolution.

Heterojunctions based on metal halide perovskites (MHPs) are promising systems for the photocatalytic hydrogen evolution reaction (HER). In this work, we coupled Cs3Bi2Br9 nanocrystals (NCs), obtained by wet ball milling synthesis, with g-C3N4 nanosheets (NSs), produced by thermal oxidation of bulk g-C3N4, in air. These methods are reproducible, inexpensive and easy to scale up. Heterojunctions with different loadings of Cs3Bi2Br9 NCs were fully characterised and tested for the HER. A relevant improvement of H2 production with respect to pristine carbon nitride was achieved at low NCs levels reaching values up to about 4600 µmol g-1 h-1. This work aims to provide insights into the synthesis of inexpensive and high-performing heterojunctions using MHP for photocatalytic applications.

Multiwalled Carbon Nanotubes Embedded in a Polymeric Matrix as a New Material for Thin Film Microextraction (TFME) in Organic Pollutant Monitoring.

It is essential to monitor organic pollutants to control contamination levels in environmental water bodies. In this respect, the development of new materials based on functionalised polymeric films for the measurement of toxic compounds is of interest. In this study, we prepare new films based on polymer cellulose triacetate modified with multi-walled carbon nanotubes for the monitoring of selected compounds: a fungicide (chlorpyrifos) and two emerging contaminants, the musk tonalide and the bactericide triclosan, which are used in the formulation of personal care products. The films, upon contact with water samples and following the principles of thin film microextraction, allow the determination of organic pollutants at low concentration levels. The contact time of the film with a predetermined volume of water is fixed at 60 min, and the compounds are eluted with a small volume (1 mL) of organic solvent for GC-MS analysis. Parameters such as repeatability for different films and detection limits are found to be satisfactory. Applying the method to river water demonstrates its suitability and, in the cases of chlorpyrifos and tonalide, the absence of a significant matrix effect.

Green and Efficient Determination of Fluoroquinolone Residues in Edible Green Fruits and Leafy Vegetables by Ultrasound-Assisted Extraction Followed by HPLC-MS/MS.

In this work, a simple, quick and efficient analytical method for determination of human and veterinary fluoroquinolone antimicrobial residues in lettuce, cucumber and spinach is developed. The procedure entails a 6 min ultrasound-assisted extraction (UAE, 3 × 2 min) in an alkaline (2% v/v NH3) aqueous solution containing Mg2+ ions (3 × 6 mL), with no need for organic solvents. The extract is submitted to cleanup on the HLB™ cartridge and the fluoroquinolones are separated and quantified by HPLC-MS/MS in a 10 min chromatographic run, using a small amount of acetonitrile in the mobile phase. The method, entirely developed in real matrices, is validated according to the updated analytical guidelines and provided suitable recoveries in the range of 67-116% and precision (RSD ≤ 20%, n = 3) at different concentrations (15, 70 and 150 ng g-1), with method quantification limits of 2-10 ng g-1. Fluoroquinolones were detected and quantified at concentrations from few to hundreds of nanograms per gram in vegetables from supermarkets, demonstrating the applicability of the method for monitoring residues of these pharmaceuticals.

MCD Diet Rat Model Induces Alterations in Zinc and Iron during NAFLD Progression from Steatosis to Steatohepatitis.

We evaluate the effects of the methionine-choline-deficient (MCD) diet on serum and hepatic zinc (Zn) and iron (Fe) and their relationships with matrix metalloproteinases (MMPs) and their modulators (TIMPs and RECK) as well as hepatic fatty acids using male Wistar rats fed 2-, 4- and 8-week MCD diets. Serum and hepatic Zn decrease after an 8-week MCD diet. Serum Fe increases after an 8-week MCD diet and the same occurs for hepatic Fe. An increase in hepatic MMP activity, associated with a decrease in RECK and TIMPs, is found in the MCD 8-week group. Liver Fe shows a positive correlation versus MMPs and RECK, and an inverse correlation versus TIMPs. A positive correlation is found comparing liver Zn with stearic, vaccenic and arachidonic acids, and an inverse correlation is found with linolenic and docosatetraenoic acids. An opposite trend is found between liver Fe versus these fatty acids. During NAFLD progression from steatosis to steatohepatitis, MCD rats exhibit an increase in Zn and a decrease in Fe levels both in serum and tissue associated with alterations in hepatic MMPs and their inhibitors, and fatty acids. The correlations detected between Zn and Fe versus extracellular matrix modulators and fatty acids support their potential role as therapeutic targets.

Carbon nanotubes-modified poly-high internal phase emulsions for pharmaceuticals pre-concentration and determination.

This paper deals with the preparation of new composites between polymerized/crosslinked high internal phase emulsions (polyHIPEs) and carbon nanotubes (CNTs), specifically designed for pharmaceutical analytical applications. While the composition of the polyHIPEs was maintained constant, the amount of CNTs was varied from 0.5% to 1% w/v. As proof-of-concept, the materials were tested for solid-phase extraction. Three drugs with different physical-chemical properties, namely 17ß-estradiol (E2), Naproxen (NPX), and Oxprenolol (OXP) were selected as probes to investigate the adsorption/elution conditions on/from the CNT/polyHIPE composites for future analytical applications. The sorption and desorption behavior of the three analytes was studied at different pH values. The experimental results are coherent with chemistry of the support and the physical-chemical characteristics of the considered analytes. The incorporation of CNTs into the polyHIPEs network strongly influences the sorption properties of these materials.

Combined Layer-by-Layer/Hydrothermal Synthesis of Fe3O4@MIL-100(Fe) for Ofloxacin Adsorption from Environmental Waters.

A simple not solvent and time consuming Fe3O4@MIL-100(Fe), synthesized in the presence of a small amount of magnetite (Fe3O4) nanoparticles (27.3 wt%), is here presented and discussed. Layer-by-layer alone (20 shell), and combined layer-by-layer (5 shell)/reflux or /hydrothermal synthetic procedures were compared. The last approach (Fe3O4@MIL-100_H sample) is suitable (i) to obtain rounded-shaped nanoparticles (200-400 nm diameter) of magnetite core and MIL-100(Fe) shell; (ii) to reduce the solvent and time consumption (the layer-by-layer procedure is applied only 5 times); (iii) to give the highest MIL-100(Fe) amount in the composite (72.7 vs. 18.5 wt% in the layer-by-layer alone); (iv) to obtain a high surface area of 3546 m2 g-1. The MIL-100(Fe) sample was also synthesized and both materials were tested for the absorption of Ofloxacin antibiotic (OFL). Langmuir model well describes OFL adsorption on Fe3O4@MIL-100_H, indicating an even higher adsorption capacity (218 ± 7 mg g-1) with respect to MIL-100 (123 ± 5 mg g-1). Chemisorption regulates the kinetic process on both the composite materials. Fe3O4@MIL-100_H performance was then verified for OFL removal at µg per liter in tap and river waters, and compared with MIL-100. Its relevant and higher adsorption efficiency and the magnetic behavior make it an excellent candidate for environmental depollution.

Photochemistry of Cannabidiol (CBD) Revised. A Combined Preparative and Spectrometric Investigation.

Cannabis is a plant with an astonishing ability to biosynthesize cannabinoids, and more than 100 molecules belonging to this class have been isolated. Among them in recent years cannabidiol (CBD) has received the interest of pharmacology as the major nonpsychotropic cannabinoid with many potential clinical applications. Although the reactivity of CBD has been widely investigated, only little attention has been given to the possible photodegradation of this cannabinoid, and the data available in the literature are outdated and, in some cases, conflicting. The aim of the present work is providing a characterization of the photochemical behavior of CBD in organic solvents, through a detailed GC-MS analyses, isolation, and NMR characterization of the photoproducts obtained.

Magnetic Micro-Solid-Phase Extraction Using a Novel Carbon-Based Composite Coupled with HPLC-MS/MS for Steroid Multiclass Determination in Human Plasma.

A micron-sized sorbent, Magn-Humic, has been prepared by humic acids pyrolysis onto silica-coated magnetite. The material was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), thermogravimetric analysis (TGA), and Brunauer, Emmett, and Teller (BET) surface area measurements and applied for simultaneous magnetic solid-phase extraction (MSPE) of glucocorticoids, estrogens, progestogens, and androgens at ng mL-1 levels from human plasma followed by high-performance liquid chromatography coupled with mass spectrometry (HPLC-MS/MS). Due to the low affinity for proteins, steroids extraction was done with no need for proteins precipitation/centrifugation. As highlighted by a design of experiments, MSPE was performed on 250 µL plasma (after 1:4 dilution) by 50 mg Magn-Humic (reusable for eight extractions) achieving quantitative recovery and satisfying clean-up. This was improved by washing (2 mL 2% v/v formic acid) prior to analytes elution by 0.5 mL 1:1 v/v methanol-acetonitrile followed by 0.5 mL methanol; eluate reduction to 0.25 mL compensated the initial sample dilution. The accuracy was assessed in certified blank fetal bovine serum and in human plasma, gaining satisfactory recovery in the range 65-122%, detection limits in the range 0.02-0.3 ng mL-1 (0.8 ng mL-1 for 17-ß-estradiol) and suitable inter-day precision (relative standard deviation (RSD) <14%, n = 3). The method was evaluated in terms of selectivity, sensitivity, matrix-effect, instrumental carry-over, and it was applied to human plasma samples.

Zinc Based Metal-Organic Frameworks as Ofloxacin Adsorbents in Polluted Waters: ZIF-8 vs. Zn3(BTC)2.

Two different zinc-based metal-organic frameworks (MOFs) were investigated to remove one of the most used fluoroquinolone antibiotic, Ofloxacin (OFL), from polluted water. The most common zeolitic imidazolate framework-8 (ZIF-8) and the green Zn(II) and benzene-1,3,5-tri-carboxylate (Zn3(BTC)2) were prepared through a facile synthetic route and characterized by means of Fourier-Transform Infrared (FT-IR) Spectroscopy, X-ray Powder Diffraction (XRPD), and Scanning Electron Microscopy (SEM) analyses. The two MOFs were compared in terms of both adsorption and kinetic aspects under real conditions (tap water, natural pH). Results showed that OFL was adsorbed in remarkable amounts, 95 ± 10 and 25.3 ± 0.8 mg g-1 on ZIF-8 and Zn3(BTC)2, respectively, following different mechanisms. Specifically, a Langmuir model well described the ZIF-8 profile, while for Zn3(BTC)2, cooperative adsorption occurred. Moreover the kinetic results were quite different, pseudo-second-order and sigmoidal, respectively. The suitability of ZIF-8 and Zn3(BTC)2 as adsorbent phases for water depollution was tested on tap water samples spiked with OFL 10 µg L-1. The obtained removal efficiencies, of 88% for ZIF-8 and 72% for Zn3(BTC)2, make these materials promising candidates for removing fluoroquinolone antibiotics (FQs) from polluted waters, notwithstanding their limited reusability in tap water, as demonstrated by in-depth characterization of the two MOFs after usage.

HA-C@silica sorbent for simultaneous extraction and clean-up of steroids in human plasma followed by HPLC-MS/MS multiclass determination.

Aim and novelty of this work are the development of a simple and straightforward analytical procedure for multiclass determination of steroid hormones in human plasma. The method entails a single pre-treatment step based on solid-phase extraction using a recently proposed sorbent phase (HA-C@silica). This is easily prepared with good reproducibility via pyrolysis of humic acids onto silica, and not yet tested in biological fluids. It proved to be advantageous as it showed poor affinity for the protein matrix constituents while quantitatively extracting and pre-concentrating the target analytes. Indeed, as demonstrated in bovine serum albumin solution, up to ca. 90% protein is not retained by the sorbent, similarly to the behaviour of restricted access carbon nanotubes, tested for comparison. The high albumin exclusion allowed a satisfactory clean-up avoiding protein precipitation and centrifugation before extraction. The extraction procedure, optimized by a chemometric approach (23 experimental design) in BSA solution, provided quantitative recovery (76-119%, n = 3) for all steroids working with 1:8-diluted plasma (2 mL) and 100 mg HA-C@silica. Before analytes elution by 1 mL methanol-acetonitrile (1:1, v/v), selective washings (2% v/v formic acid and 30% v/v methanol) were applied to remove the small fraction of retained proteins, thus obtaining very clean SPE extracts to be analyzed by HPLC-ESI-MS/MS. This allowed identification/quantification (MRM mode) at few ng mL-1 by a single chromatographic run. The procedure was verified in blank-certified foetal bovine serum (spikes 10-100 ng mL-1), obtaining good recovery and suitable inter-day precision (RSDs < 15%, n = 3). The analytical method, applied to real plasma samples analysis, is appealing in terms of sample throughput, extraction efficiency and clean-up.