Preparation of different conjugated polymers characterized by complementary electronic properties from an identical precursor.

The possibility of generating regions with different electronic properties within the same organic semiconductor thin film could offer novel opportunities for designing and fabricating organic electronic devices and circuits. This study introduces a new approach based on a novel type of highly processable polymer precursor that can yield two different conjugated polymers characterized by complementary electronic properties, i.e. promoting electron or hole transport, from the same starting material. In particular, these multipotent precursors comprise functionalized dihydroanthracene units that can offer several functionalization opportunities to improve the solubility or insert specific functionalities. This strategy also allows for the preparation of high-molecular-weight conjugated polymers comprising diethynylanthracene and anthraquinone units without the need for solubilizing side chains. Thin films of the polymer precursor can be used, after solid-state transformations, to prepare single organic layers comprising regions characterized by different chemical nature and electronic properties. Here, we present a detailed characterization of the chemical and electronic properties of the precursor and the obtained conjugated polymers, showing how it is possible to harvest their characteristics for potential applications such as electrochromic surfaces and organic field-effect transistors.

Effect of Polymer Composition on the Optical Properties of a New Aggregation-Induced Emission Fluorophore: A Combined Experimental and Computational Approach.

Nowadays, fluorophores with a tetraphenylethylene (TPE) core are considered interesting due to the aggregation-induced emission (AIE) behavior that enables their effective use in polymer films. We propose a novel TPE fluorophore (TPE-BPAN) bearing two dimethylamino push and a 4-biphenylacetonitrile pull moieties with the typical AIE characteristics in solution and in the solid state, as rationalized by DFT calculations. Five different host polymer matrices with different polarity have been selected: two homopolymers of poly(methylmethacrylate) (PMMA) and poly(cyclohexyl methacrylate) (PCHMA) and three copolymers at different compositions (P(MMA-co-CHMA) 75:25, 50:50, and 25:75 mol%). The less polar comonomer of CHMA appeared to enhance TPE-BPAN emission with the highest quantum yield (QY) of about 40% measured in P(MMA-co-CHMA) 75:25. Further reduction in polymer polarity lowered QY and decreased the film stability and adhesion to the glass surface. LSC performances were not significantly affected by the matrix's polarity and resulted in around one-third of the state-of-the-art due to the reduced QY of TPE-BPAN. The theoretical investigation based on density functional theory (DFT) calculations clarified the origin of the observed AIE and the role played by the environment in modulating the photophysical behavior.

Safety and Efficacy of Liraglutide, 3.0 mg, Once Daily vs Placebo in Patients With Poor Weight Loss Following Metabolic Surgery: The BARI-OPTIMISE Randomized Clinical Trial.

Importance: Metabolic surgery leads to weight loss and improved health, but these outcomes are highly variable. Poor weight loss is associated with lower circulating levels of glucagon-like peptide-1 (GLP-1). Objective: To assess the efficacy and safety of the GLP-1 receptor agonist, liraglutide, 3.0 mg, on percentage body weight reduction in patients with poor weight loss and suboptimal GLP-1 response after metabolic surgery. Design, Setting, and Participants: The Evaluation of Liraglutide 3.0 mg in Patients With Poor Weight Loss and a Suboptimal Glucagon-Like Peptide-1 Response (BARI-OPTIMISE) randomized placebo-controlled trial recruited adult patients at least 1 year after metabolic surgery who had experienced 20% or less body weight loss from the day of surgery and a suboptimal nutrient-stimulated GLP-1 response from 2 hospitals in London, United Kingdom, between October 2018 and November 2019. Key exclusion criteria were type 1 diabetes; severe concomitant psychiatric, gastrointestinal, cardiac, kidney or metabolic disease; and use of insulin, GLP-1 receptor analogues, and medication that can affect weight. The study period was 24 weeks followed by a 4-week follow-up period. Last participant follow-up was completed in June 2020. All participants and clinical study personnel were blinded to treatment allocation. Of 154 assessed for eligibility, 70 met trial criteria and were included in the study, and 57 completed follow-up. Interventions: Liraglutide, 3.0 mg, once daily or placebo as an adjunct to lifestyle intervention with a 500-kcal daily energy deficit for 24 weeks, on a 1:1 allocation by computer-generated randomization sequence, stratified by surgery type (Roux-en-Y gastric bypass [RYGB] or sleeve gastrectomy [SG]) and type 2 diabetes status. Main Outcome and Measures: The primary outcome was change in percentage body weight from baseline to the end of the 24-week study period based on an intention-to-treat analysis. Participant safety was assessed through monitoring of biochemical parameters, including kidney and liver function, physical examination, and assessment for adverse events. Results: A total of 70 participants (mean [SD] age, 47.6 [10.7] years; 52 [74%] female) with a poor weight loss response following RYGB or SG were randomized to receive 3.0-mg liraglutide (n = 35) or placebo (n = 35). All participants received at least 1 dose of the trial drug. Eight participants discontinued treatment (4 per group), and 2 in the 3.0-mg liraglutide group and 1 in the placebo group were lost to follow-up. Due to COVID-19 restrictions, 3 participants in the 3.0-mg liraglutide group and 7 in the placebo group were unable to attend their final in-person assessment. Estimated change in mean (SD) percentage body weight from baseline to week 24 was -8.82 (4.94) with liraglutide, 3.0 mg (n = 31), vs -0.54 (3.32) with placebo (n = 26). The mean difference in percentage body weight change for liraglutide, 3.0 mg, vs placebo was -8.03 (95% CI, -10.39 to -5.66; P < .001). Adverse events, predominantly gastrointestinal, were more frequent with liraglutide, 3.0 mg (28 events [80%]), than placebo (20 events [57%]). There were no serious adverse events and no treatment-related deaths. Conclusion and Relevance: These findings support the use of adjuvant liraglutide, 3.0 mg, for weight management in patients with poor weight loss and suboptimal GLP-1 response after metabolic surgery. Trial Registration: ClinicalTrials.gov Identifier: NCT03341429.

Aggregation-Induced Emission (AIE), Life and Health.

Light has profoundly impacted modern medicine and healthcare, with numerous luminescent agents and imaging techniques currently being used to assess health and treat diseases. As an emerging concept in luminescence, aggregation-induced emission (AIE) has shown great potential in biological applications due to its advantages in terms of brightness, biocompatibility, photostability, and positive correlation with concentration. This review provides a comprehensive summary of AIE luminogens applied in imaging of biological structure and dynamic physiological processes, disease diagnosis and treatment, and detection and monitoring of specific analytes, followed by representative works. Discussions on critical issues and perspectives on future directions are also included. This review aims to stimulate the interest of researchers from different fields, including chemistry, biology, materials science, medicine, etc., thus promoting the development of AIE in the fields of life and health.

Orange/Red Benzo[1,2-b:4,5-b']dithiophene 1,1,5,5-Tetraoxide-Based Emitters for Luminescent Solar Concentrators: Effect of Structures on Fluorescence Properties and Device Performances.

Luminescent solar concentrators (LSCs) are a class of optical devices able to harvest, downshift, and concentrate sunlight, thanks to the presence of emitting materials embedded in a polymer matrix. Use of LSCs in combination with silicon-based photovoltaic (PV) devices has been proposed as a viable strategy to enhance their ability to harvest diffuse light and facilitate their integration in the built environment. LSC performances can be improved by employing organic fluorophores with strong light absorption in the center of the solar spectrum and intense, red-shifted emission. In this work, we present the design, synthesis, characterization, and application in LSCs of a series of orange/red organic emitters featuring a benzo[1,2-b:4,5-b']dithiophene 1,1,5,5-tetraoxide central core as an acceptor (A) unit. The latter was connected to different donor (D) and acceptor (A') moieties by means of Pd-catalyzed direct arylation reactions, yielding compounds with either symmetric (D-A-D) or non-symmetric (D-A-A') structures. We found that upon light absorption, the compounds attained excited states with a strong intramolecular charge-transfer character, whose evolution was greatly influenced by the nature of the substituents. In general, symmetric structures showed better photophysical properties for the application in LSCs than their non-symmetric counterparts, and using a donor group of moderate strength such as triphenylamine was found preferable. The best LSC built with these compounds presented photonic (external quantum efficiency of 8.4 ± 0.1%) and PV (device efficiency of 0.94 ± 0.06%) performances close to the state-of-the-art, coupled with a sufficient stability in accelerated aging tests.

Polyketone-Based Anion-Exchange Membranes for Alkaline Water Electrolysis.

Anion-exchange membranes (AEMs) are involved in a wide range of applications, including fuel cells and water electrolysis. A straightforward method for the preparation of efficient AEMs consists of polymer functionalization with robust anion-exchange sites. In this work, an aliphatic polyketone was functionalized with 1-(3-aminopropyl)imidazole through the Paal-Knorr reaction, with a carbonyl (CCO %) conversion of 33%. The anion-exchange groups were generated by the imidazole quaternization by using two different types of alkyl halides, i.e., 1,4-iodobutane and 1-iodobutane, with the aim of modulating the degree of crosslinking of the derived membrane. All of the membranes were amorphous (Tg ∼ 30 °C), thermally resistant up to 130 °C, and had a minimum Young's modulus of 372 ± 30 MPa and a maximum of 86 ± 5 % for the elongation at break for the least-crosslinked system. The ionic conductivity of the AEMs was determined at 25 °C by electrochemical impedance spectroscopy (EIS), with a maximum of 9.69 mS/cm, i.e., comparable with that of 9.66 mS/cm measured using a commercially available AEM (Fumasep-PK-130). Future efforts will be directed toward increasing the robustness of these PK-based AEMs to meet all the requirements needed for their application in electrolytic cells.

Synthesis and Characterization of a Composite Anion Exchange Membrane for Water Electrolyzers (AEMWE).

Anion exchange membranes (AEM) have gained attention recently as a promising candidate for low-cost water electrolysis systems to produce hydrogen, linked with renewable energy resources as a sustainable alternative to fossil fuels. The development of potential materials for producing and analyzing AEM is an imperative step towards commercialization and plays a competitive role in the hydrogen production industry. In this article, we developed a composite anion exchange membrane prepared by activating a commercial support structure (Celgard® 3401) with a commercially available functional group (Fumion® FAA-3) through a phase-inversion process. Fourier-transform infrared spectroscopy (FTIR) and Scanning Electron Microscopy (SEM) analysis demonstrated the phase-inversion procedure as an effective methodology. Furthermore, the cell performance test result (with Celgard/Fumion) was very promising and even better in comparison with a commercial membrane commonly applied in alkaline electrolysis (Fumasep). We also developed a testing procedure for membrane performance evaluation during electrolysis which is very critical considering the effect of CO2 absorption on membrane conductivity.

Functionalized aliphatic polyketones with germicide activity.

The COVID-19 pandemic has further confirmed to the community that direct contact with contaminated surfaces and objects represents an important source of pathogen spreading among humans. Therefore, it is of paramount importance to design effective germicidal paints to ensure a rapid and potent disinfectant action of surfaces. In this work, we design novel germicide polymeric coatings by inserting quaternary ammonium and sugar groups on the macromolecular backbone, thus respectively endowing the polymer with germicide features and hydrophilicity to interact with the surfaces. An aliphatic polyketone was selected as a starting polymer matrix that was functionalized with primary amine derivatives via the Paal-Knorr reaction. The resulting polymers were deposited on cellulose filter papers and checkboard charts with excellent coating yield and substrate coverage as determined by scanning electron microscopy for cellulose. Remarkably, the substrates coated by the functional polymers bearing quaternary ammonium compounds showed excellent bactericide properties with antibacterial rate of 99% and logarithmic reduction of >3. Notably, the polymers with higher hydrophobicity showed better retention on the substrate after being treated with water at neutral pH.

Impact of sleeve gastrectomy compared to Roux-en-y gastric bypass upon hedonic hunger and the relationship to post-operative weight loss.

'Hedonic hunger' indicates the desire to consume food in the absence of an energy requirement. Hedonic hunger can be investigated using the validated Power of Food Scale (PFS). Roux-en-Y gastric bypass (RYGB) and sleeve gastrectomy (SG) are currently the most effective treatment options for severe obesity. Following RYGB, hedonic hunger diminishes, which may contribute to sustained weight loss. There are no data examining the effect of SG on hedonic hunger. We prospectively evaluated hedonic hunger using PFS in patients with severe obesity prior to and 6 months after SG (n = 95) or RYGB (n = 44) and investigated the procedure-specific relationship between percentage weight loss (%WL) and hedonic hunger. Anthropometric data were collected at baseline after 6 months, 12 months and 24 months post-operatively. PFS contains 15 items grouped into 3 domains considering when food is: available (FA), present (FP), tasted (FT) and a total score (TS). At 6 months, a significant reduction was seen in all categories post-SG (p < 0.0001) and in TS (p = 0.003), FA (p = 0.0006) and FP (p = 0.0007) post-RYGB. A significantly larger reduction in FP scores was seen post-SG (p = 0.01). Post-SG, a significant correlation with 6-month %WL was noted for changes in FP (p = 0.03) and TS (p = 0.03). Post-SG changes in FP and TS predicted 24-month %WL. Post-RYGB significant correlations were seen between 6-month %WL and dFA (p = 0.04) and dFP (p = 0.03). Changes in FA, FP and TS were predictive of 12-month %WL. HH is reduced following both SG and RYGB with a greater reduction following SG and is related to post-operative %WL. PFS may have a role as a predictive tool for post-operative outcomes following SG and RYGB.

Invisible Thermoplasmonic Indium Tin Oxide Nanoparticle Ink for Anti-counterfeiting Applications.

In this study, we present a thermoplasmonic transparent ink based on a colloidal dispersion of indium tin oxide (ITO) nanoparticles, which can offer several advantages as anti-counterfeiting technology. The custom ink could be directly printed on several substrates, and it is transparent under visible light but is able to generate heat by absorption of NIR radiation. Dynamic temperature mapping of the printed motifs was performed by using a thermal camera while irradiating the samples with an IR lamp. The printed samples presented fine features (in the order of 75 µm) and high thermal resolution (of about 250 µm). The findings are supported by thermal finite-element simulations, which also allow us to explore the effect of different substrate characteristics on the thermal readout. Finally, we built a demonstrator comprising a QR Code invisible to the naked eye, which became visible in thermal images under NIR radiation. The high transparency of the printed ink and the high speed of the thermal reading (figures appear/disappear in less than 1 s) offer an extremely promising strategy toward low-cost, scalable production of photothermally active invisible labels.

Efficient 1400-1600†nm Circularly Polarized Luminescence from a Tuned Chiral Erbium Complex.

Novel chiral Er complexes based on both enantiomers of extended i PrPyBox (2,6-Bis[4-isopropyl-4,5-dihydrooxazol-2-yl)]pyridine) show strong near-infrared circularly polarized luminescence (CPL) within the 1400 to 1600 nm spectral region under 450 nm irradiation. CPL activity in this region, despite being particularly rare, would open the way to potential applications in the domain, e.g., of fiber-optic telecommunications and free-space long-distance optical communications employing circularly polarized light. Moreover, the long wavelength excitation is advantageous for applications in the field of (circularly polarized) microscopy and bioimaging.

EAES rapid guideline: systematic review, network meta-analysis, CINeMA and GRADE assessment, and European consensus on bariatric surgery-extension 2022.

BACKGROUND: The European Association for Endoscopic Surgery Bariatric Guidelines Group identified a gap in bariatric surgery recommendations with a structured, contextualized consideration of multiple bariatric interventions. OBJECTIVE: To provide evidence-informed, transparent and trustworthy recommendations on the use of sleeve gastrectomy, Roux-en-Y gastric bypass, adjustable gastric banding, gastric plication, biliopancreatic diversion with duodenal switch, one anastomosis gastric bypass, and single anastomosis duodeno-ileal bypass with sleeve gastrectomy in patients with severe obesity and metabolic diseases. Only laparoscopic procedures in adults were considered. METHODS: A European interdisciplinary panel including general surgeons, obesity physicians, anesthetists, a psychologist and a patient representative informed outcome importance and minimal important differences. We conducted a systematic review and frequentist fixed and random-effects network meta-analysis of randomized-controlled trials (RCTs) using the graph theory approach for each outcome. We calculated the odds ratio or the (standardized) mean differences with 95% confidence intervals for binary and continuous outcomes, respectively. We assessed the certainty of evidence using the CINeMA and GRADE methodologies. We considered the risk/benefit outcomes within a GRADE evidence to decision framework to arrive at recommendations, which were validated through an anonymous Delphi process of the panel. RESULTS: We identified 43 records reporting on 24 RCTs. Most network information surrounded sleeve gastrectomy and Roux-en-Y gastric bypass. Under consideration of the certainty of the evidence and evidence to decision parameters, we suggest sleeve gastrectomy or laparoscopic Roux-en-Y gastric bypass over adjustable gastric banding, biliopancreatic diversion with duodenal switch and gastric plication for the management of severe obesity and associated metabolic diseases. One anastomosis gastric bypass and single anastomosis duodeno-ileal bypass with sleeve gastrectomy are suggested as alternatives, although evidence on benefits and harms, and specific selection criteria is limited compared to sleeve gastrectomy and Roux-en-Y gastric bypass. The guideline, with recommendations, evidence summaries and decision aids in user friendly formats can also be accessed in MAGICapp:  https://app.magicapp.org/#/guideline/Lpv2kE CONCLUSIONS: This rapid guideline provides evidence-informed, pertinent recommendations on the use of bariatric and metabolic surgery for the management of severe obesity and metabolic diseases. The guideline replaces relevant recommendations published in the EAES Bariatric Guidelines 2020.

One-step functionalization of mildly and strongly reduced graphene oxide with maleimide: an experimental and theoretical investigation of the Diels-Alder [4+2] cycloaddition reaction.

For large-scale graphene applications, such as the production of polymer-graphene nanocomposites, exfoliated graphene oxide (GO) and its reduced form (rGO) are presently considered to be very suitable starting materials, showing enhanced chemical reactivity with respect to pristine graphene, in addition to suitable electronic properties (i.e., tunable band gap). Among other chemical processes, a suitable way to obtain surface decoration of graphene is through a direct one-step Diels-Alder (DA) reaction, e.g. through the use of dienophile or diene moieties. However, the feasibility and extent of decoration largely depends on the specific graphene microstructure that in the case of rGO sheets is not easy to control and generally presents a high degree of inhomogeneity owing to various on-plane functionalization (e.g., epoxide and hydroxyl groups) or in-plane lattice defects. In an effort to gain some insights into the covalent functionalization of variably reduced GO samples, we present a combined experimental and theoretical study on the DA cycloaddition reaction of maleimide, a dienophile functional unit well-suited for chemical conjugation of polymers and macromolecules. In particular, we considered both mildly and strongly reduced GOs. Using thermogravimetry, Raman and X-Ray photoelectron spectroscopy, and elemental analysis we show evidence of variable chemical reactivity of rGO as a function of the residual oxygen content. Moreover, from quantum mechanical calculations carried out at the DFT level on different graphene reaction sites, we provide a more detailed molecular view to interpret experimental findings and to assess the reactivity series of different graphene modifications.

Synthesis and Spectroscopic Characterization of Thienopyrazine-Based Fluorophores for Application in Luminescent Solar Concentrators (LSCs).

Organic fluorophores have found broad application as emitters in luminescent solar concentrators (LSCs) for silicon photovoltaics. In particular, the preparation of organic conjugated systems with intense light-harvesting ability, emissions in the deep-red and NIR regions, and large Stokes shift values represent a very challenging undertaking. Here, we report a simple and easy way to prepare three symmetrical donor-acceptor-donor (DAD) organic-emitting materials based on a thienopyrazine core. The central core in the three dyes was modified with the introduction of aromatic substituents, aiming to affect their optical properties. The fluorophores were characterized by spectroscopic studies. In all cases, visible-NIR emissions with large Stokes shifts were found, highlighting these molecules as promising materials for the application in LSCs.

Combined spectroscopic and theoretical analysis of the binding of a water-soluble perylene diimide to DNA/RNA polynucleotides and G-quadruplexes.

We present here a combined spectroscopic and theoretical analysis of the binding of N,N'-bis(2-(1-piperazino)ethyl)-3,4,9,10-perylenetetracarboxylic acid diimide dichloride (PZPERY) to different biosubstrates. Absorbance titrations and circular dichroism experiments, melting studies and isothermal calorimetry (ITC) titrations reveal a picture where the binding to natural double-stranded DNA is very different from that to double and triple-stranded RNAs (poly(A)∙poly(U) and poly(U)∙poly(A)⁎poly(U)). As confirmed also by the structural and energetic details clarified by density functional theory (DFT) calculations, intercalation occurs for DNA, with a process driven by the combination of aggregates disruption and monomers intercalation. Oppositely, for RNAs, no intercalation but groove binding with the formation of supramolecular aggregates is observed. Among all the tested biosubstrates, the affinity of PZPERY towards DNA G-quadruplexes (G4) is the greatest one with a preference for human telomeric G4s. Focusing on hybrid G4 forms, either sitting-atop ("tetrad-parallel") or lateral ("groove-parallel") binding modes were considered in the discussion of the experimental results and molecular dynamics (MD) simulations. Both turned out to be possible concurrently, in agreement also with the experimental binding stoichiometries higher than 2:1.

Thermally Switchable Electrically Conductive Thermoset rGO/PK Self-Healing Composites.

Among smart materials, self-healing is one of the most studied properties. A self-healing polymer can repair the cracks that occurred in the structure of the material. Polyketones, which are high-performance thermoplastic polymers, are a suitable material for a self-healing mechanism: a furanic pendant moiety can be introduced into the backbone and used as a diene for a temperature reversible Diels-Alder reaction with bismaleimide. The Diels-Alder adduct is formed at around 50 °C and broken at about 120 °C, giving an intrinsic, stimuli-responsive self-healing material triggered by temperature variations. Also, reduced graphene oxide (rGO) is added to the polymer matrix (1.6-7 wt%), giving a reversible OFF-ON electrically conductive polymer network. Remarkably, the electrical conductivity is activated when reaching temperatures higher than 100 °C, thus suggesting applications as electronic switches based on self-healing soft devices.

Mechanochromic LLDPE Films Doped with NIR Reflective Paliogen Black.

The perylene bisimide derivative Paliogen Black (P-black) is proposed as a new chromogenic probe that shows visible (vis) and near-infrared (NIR) responses after mechanical solicitations of host linear low-density polyethylene (LLDPE) films. P-black is reported to display strong absorption in the vis spectrum and unusual reflective and cooling features in the NIR region. Uniaxial deformation of the 2.5, 5, and 10 wt% P-black/LLDPE films yields a dichroic absorption under polarized light with color variations attributed by the computational analysis to the distinct anisotropic behavior of the transition dipole moments of P-black chromophores. When LLDPE films are deformed, P-black aggregates reduce their size from ≈30-40 µm to ≈5-10 µm that, in turn, causes reflectivity losses of about 30-40% at the maximum elongation. This gives rise to warming of 5-6 °C of the locally oriented film placed in contact with a black substrate under the illumination with an IR lamp for 5 s. These features combined with the high sensitivity of the vis-NIR response toward mechanical solicitations render P-black as a new solution to detect uniaxial deformations of plastic films through both optical and thermal outputs.

No Influence of the Fat Mass and Obesity-Associated Gene rs9939609 Single Nucleotide Polymorphism on Blood Lipids in Young Males.

The fat mass and obesity-associated gene (FTO) rs9939609 A-allele is linked to obesity and dyslipidemia, yet the independent influence of this polymorphism on blood lipids remains equivocal. We examined the influence of the FTO rs9939609 polymorphism on fasting and postprandial blood lipids in individuals homozygous for the risk A-allele or T-allele with similar anthropometric and demographic characteristics. 12 AA and 12 TT males consumed a standardized meal after fasting overnight. Blood samples were collected at baseline (-1.5 h), before the meal (0 h), and for five hours postprandially to measure lipid, glucose, and insulin concentrations. Time-averaged total area under the curve (TAUC) values (0-5 h) were calculated and compared between genotypes. Fasting triacylglycerol (TG), high-density lipoprotein cholesterol, low-density lipoprotein cholesterol, total cholesterol, non-esterified fatty acid (NEFA), glucose, and insulin concentrations were similar between groups (p ≥ 0.293). TAUC for TG was similar in AAs and TTs (95% confidence interval (CI) -0.52 to 0.31 mmol/L/h; p = 0.606). Likewise, TAUC values were similar for NEFA (95% CI -0.04 to 0.03 mmol/L/h; p = 0.734), glucose (95% CI -0.41 to 0.44 mmol/L/h; p = 0.951), and insulin (95% CI -6.87 to 2.83 pmol/L/h; p = 0.395). Blood lipids are not influenced by the FTO rs9939609 polymorphism, suggesting the FTO-dyslipidemia link is mediated by adiposity and weight management is important in preventing FTO-related lipid variations.

High-Performance Luminescent Solar Concentrators Based on Poly(Cyclohexylmethacrylate) (PCHMA) Films.

In this study, we report on the use of poly(cyclohexylmethacrylate) (PCHMA) as an alternative to the commonly used poly(methylmethacrylate) (PMMA) for the design of efficient luminescent solar concentrators (LSCs). PCHMA was selected due to its less polar nature with respect to PMMA, a characteristic that was reported to be beneficial in promoting the fluorophore dispersibility in the matrix, thus maximizing the efficiency of LSCs also at high doping. In this sense, LSC thin films based on PCHMA and containing different contents of Lumogen F Red 305 (LR, 0.2-1.8 wt%) demonstrated optical efficiencies (ηopt) comprising between 9.5% and 10.0%, i.e., about 0.5-1% higher than those collected from the LR/PMMA systems. The higher LR/polymer interactions occurred using the PCHMA matrix maximized the solar harvesting characteristics of the fluorophore and limited the influence of the adverse dissipative phenomena on the fluorophore quantum efficiency. These effects were also reflected by varying the LSC film thickness and reaching maximum ηopt of about 11.5% in the case of PCHMA films of about 30 µm.

pH-Responsive Polyketone/5,10,15,20-Tetrakis-(Sulfonatophenyl)Porphyrin Supramolecular Submicron Colloidal Structures.

In this work, we prepared color-changing colloids by using the electrostatic self-assembly approach. The supramolecular structures are composed of a pH-responsive polymeric surfactant and the water-soluble porphyrin 5,10,15,20-tetrakis-(sulfonatophenyl)porphyrin (TPPS). The pH-responsive surfactant polymer was achieved by the chemical modification of an alternating aliphatic polyketone (PK) via the Paal-Knorr reaction with N-(2-hydroxyethyl)ethylenediamine (HEDA). The resulting polymer/dye supramolecular systems form colloids at the submicron level displaying negative zeta potential at neutral and basic pH, and, at acidic pH, flocculation is observed. Remarkably, the colloids showed a gradual color change from green to pinky-red due to the protonation/deprotonation process of TPPS from pH 2 to pH 12, revealing different aggregation behavior.