Disinfection and Biocompatibility of Titanium Surfaces Treated with Glycine Powder Airflow and Triple Antibiotic Mixture: An In Vitro Study.

The aim of this in vitro study was to compare three disinfection protocols of biofilm-coated machined (MAC) and acid etched (SLA) commercial pure Grade 4 Titanium disks. Samples were infected with a vial of polymicrobial biofilm to simulate peri-implantitis in vitro. Seventeen MAC and twenty SLA titanium disks were randomly assigned to: (1) glycine powder air-flow (GYPAP) for 1 min; (2) a local delivered triple paste antibiotic composed by a gel mixture with ciprofloxacin, metronidazole, and clarithromycin (3MIX) for 1 h; and (3) a combination of both (GYPAP + 3MIX). Biocompatibility of the titanium disks after each treatment protocol was assessed by measurement of adhesion and growth of adipose-derived mesenchymal stem cells (ASCs) after 24 and 72 h. A confocal laser scanning microscope (CLSM) assessed the antibacterial effect of each treatment. Data of the antibacterial efficacy and cell viability were presented as mean with standard deviation and calculated by one-way ANOVA with multiple comparisons via Bonferroni tests. Results were considered significant with p < 0.05. The higher cell viability was achieved by the 3MIX and GYPAP combination on the SLA surfaces after 72 h. CLSM analysis showed a mean ratio of dead bacteria statistically higher in the 3MIX + GYPAP group compared with the GYPAP and 3MIX subgroups (p < 0.05). In conclusion, data showed that the combination of GYPAP and 3MIX could be preferred to the other protocols, especially in presence of SLA titanium surface.

Silicosis in finishing workers in quartz conglomerates processing.

INTRODUCTION: Outbreaks of silicosis have bene recently reported in artificial stone workers. AIM: To describe the features of silicosis in quartz conglomerate workers in North-Eastern Italy. METHODS: Active search of pneumoconiosis was performed in 11 companies of North-Eastern Italy involved in the fabrication of quartz conglomerate countertops. Occupational history, lung function tests, chest X-ray and high resolution computed tomography (HRCT) were performed. In selected cases, trans-bronchial biopsies were taken for histological evaluation and identification of silica crystals in the tissue. Cumulative exposure to crystalline silica was estimated. RESULTS: We recruited 45 workers and 24 cases of silicosis were diagnosed. Mean age at diagnosis was 43 years and duration of exposure to quartz conglomerate dust was 3.5 to 20 years. The average silica cumulative exposure was 4.3 mg/m3/y. Abnormal findings were detected in 42% of chest X-rays, in 33% of spirometry and 50% of carbon monoxide lung diffusion (DLco). HRCTs were abnormal in all cases showing well-defined rounded opacities, irregular/linear intralobular opacities and bilateral enlarged mediastinal lymph-nodes. Histological findings consistent with silicosis were observed in 24 cases. Numerous silica particles (diameter 0.1-5 µm) were identified in lung tissue. CONCLUSIONS: We reported an unexpected high incidence of silicosis in Italian workers exposed to quartz conglomerate dust. The results suggest that chest HRCT is indicated for screening of workers with high exposure to silica and DLco should be added to spirometry in health surveillance. More rigorous application of safety regulations and more effective preventive interventions at work are necessary.

Multiorgan accelerated silicosis misdiagnosed as sarcoidosis in two workers exposed to quartz conglomerate dust.

INTRODUCTION: Clusters of silicosis cases have been reported in the fabrication of quartz conglomerate, a new high-silica-content artificial stone for kitchen and bathroom benchtops (countertops). AIM: We describe two cases of accelerated-type silicosis with hepatic granulomas arising in workers exposed to artificial quartz conglomerates. METHODS: A confident diagnosis of multiorgan silicosis was based on high level of respirable silica in the workplace, typical radiological alterations in chest high-resolution CT, histological findings in the lung and liver, and detection of silica crystals in both tissues by phase-contrast polarising light microscopy and scanning electron microscopy and energy dispersive spectroscopy. RESULTS: The development of the disease <10 years after the first exposure is consistent with an accelerated-type of silicosis. Compared with other studies related to quartz conglomerate exposure, we determined that the levels of airborne crystalline silica during activity in the finishing area were between 0.260 and 0.744 mg/m3, that is, much higher than the threshold limit value according to American Conference of Governmental Industrial Hygienists (0.025 mg/m3). Moreover, liver granulomas were associated with accumulation of crystalline silica particles in the hepatic tissue. CONCLUSIONS: Quartz conglomerate fabrication is a potentially dangerous occupation. General practitioners and physicians should have awareness of this newly described occupational hazard. Accurate occupational history is critical in avoiding misdiagnosis, as silicosis caused by inhalation of dust from artificial quartz conglomerates may exhibit atypical presentation. These features seem to be related to the extremely high level of silica exposure and, possibly, to an increased toxicity of the dust generated in this process.

Iron-loaded synthetic chrysotile: a new model solid for studying the role of iron in asbestos toxicity.

The generation of reactive oxygen species and other radicals, catalyzed by iron ions at the fiber surface, is thought to play an important role in asbestos-induced cytotoxicity and genotoxicity, but a direct confirmation of this statement needs the availability of asbestos samples differing only for their iron content, without the interference of other physicochemical features. Synthetic stoichiometric chrysotile nanofibers, devoid of iron or any other contaminant, did not exert genotoxic and cytotoxic effects nor elicited oxidative stress in a murine alveolar macrophage cell line; on the contrary, the same nanofibers, loaded with 0.57% and 0.94% (w/w) iron, induced DNA strand breaks, lipoperoxidation, inhibition of redox metabolism and alterations of cell integrity, similarly to natural chrysotile. On the other hand, the incubation with ferric nitrilotriacetate, a cell-permeating iron complex, even if it caused an intracellular overloading of iron very similar to that elicited by iron-loaded synthetic chrysotile and by natural chrysotile, did not exert any of these effects. This suggests that chrysotile is not toxic by acting simply as a carrier of iron into the cell, but rather that the redox activity of iron is potentiated when organized at the fibers surface into specific crystallographic sites having coordination states able to activate free radical generation. Synthetic chrysotile fibers may be proposed as a standard reference sample and model solids for experimental studies on asbestos fibers aiming to clarify the mechanisms of its toxicity and to synthesize new fibers devoid of pathogenic effects.

Fluoro-edenitic fibres in the sputum of subjects from Biancavilla (Sicily): a pilot study.

BACKGROUND: An excess of mortality for malignant neoplasms of the pleura in Biancavilla, promoted an investigation for pleural mesothelioma, disclosing 17 cases. As the absence of known sources of asbestos exposure, a local stone quarry, located near the inhabited area, used for the extraction of building materials, was investigated. Amphibolic fibres were found in the quarry and identified as fluoro-edenite "new end-member of the edenite / fluoro-edenite series" and recognized as the fluoro-edenite holotype by International Mineralogical Association--Commission on New Minerals and Mineral Names. A pilot study was performed to verify the feasibility of using spontaneous sputum as an exposure indicator for these fibres, in a context in which the use of aerosol-induced sputum technique would not be easily accepted. METHODS: Hypothesizing a behaviour of the new fibre analogous to that of asbestos, the determination of the free fibres and the ferruginous bodies in spontaneous sputum was carried out. Phase Contrast Optical Microscope and an Environmental Scanning Electron Microscope fitted with X-ray energy dispersive analysis system (micro-analysis) were used to examine the samples. The criteria for inclusion in the study were: 1) subjects hospitalized for exacerbation of chronic obstructive pulmonary disease symptoms, 2) age > or = 45 years, 3) residence in Biancavilla for at least 30 years. RESULTS: The preliminary findings are related to 12 subjects (7 females and 5 males). Uncoated fibres (with length > 5 microm, diameter < 3 microm, aspect ratio 3.1) and ferruginous bodies were searched. Six out of twelve subjects (4 females, 2 males) had at least one of the three samples positive for the presence of fluoro-edenite, confirmed by micro-analysis. The fibre concentration found in the sputum ranged from 0.04 to 10 fibres/g; the length from 20 to 40 microm, the diameter was < 0.5 microm. No ferruginous bodies were found in any of the samples. The four women with a positive sample were housewives. Of the two men with a positive sample, one was a farmer and the other a mason. Therefore, it may be assumed that the exposure to fluoro-edenitic fibres was mainly environmental. CONCLUSION: The occurrence of the pleural mesothelioma cases and the presence of fluoro-edenitic fibres in spontaneous sputum, evidence the need to study the biological activity of fluoro-edenitic fibres and the implementation of epidemiological monitoring systems.