Tuning the planarity of molecularly imprinted covalent organic frameworks for selective extraction of ochratoxin A in alcohol samples.

Here, we report a monomer planarity modulation strategy for room-temperature constructing molecularly imprinted-covalent organic frameworks (MI-COFs) for selective extraction of ochratoxin A (OTA). 2,4,6-triformylphloroglucinol (Tp) was used as basic building block, while three amino monomers with different planarity were employed as modulators to explore the effect of planarity on the selectivity of MI-COFs. The MI-TpTapa constructed from Tp and the lowest planarity of monomer Tapa gave the highest selectivity for OTA, and was further used as the adsorbent for dispersed-solid phase extraction (DSPE) of OTA in alcohol samples. Coupling MI-TpTapa based DSPE with high-performance liquid chromatography allowed the matrix-effect free determination of OTA in alcohol samples with the limit of detection of 0.023 µg kg-1 and the recoveries of 91.4-97.6%. The relative standard deviation (RSD, n = 6) of intra and inter day was <3.2%. This work provides a new way to construct MI-COFs for selective extraction of hazardous targets.

Engineering of molecularly imprinted cavity within 3D covalent organic frameworks: An innovation for enhanced extraction and removal of microcystins.

The scarcity of selective adsorbents for efficient extraction and removal of microcystins (MCs) from complex samples greatly limits the precise detection and effective control of MCs. Three-dimensional covalent organic frameworks (3D COFs), characterized by their large specific surface areas and highly ordered rigid structure, are promising candidates, but suffer from lack of specific recognition. Herein, we design to engineer molecularly imprinted cavities within 3D COFs via molecularly imprinted technology, creating a novel adsorbent with exceptional selectivity, kinetics and capacity for the efficient extraction and removal of MCs. As proof-of-concept, a new CC bond-containing 3D COF, designated JNU-7, is designed and prepared for copolymerization with methacrylic acid, the pseudo template L-arginine and ethylene dimethacrylate to yield the JNU-7 based molecularly imprinted polymer (JNU-7-MIP). The JNU-7-MIP exhibits a great adsorption capacity (156 mg g-1) for L-arginine. Subsequently, the JNU-7-MIP based solid-phase extraction coupled with high performance liquid chromatography-mass spectrometry achieves low detection limit of 0.008 ng mL-1, wide linear range of 0.025-100 ng mL-1, high enrichment factor of 186, rapid extraction of 10 min, and good recoveries of 92.4%-106.5% for MC-LR. Moreover, the JNU-7-MIP can rapidly remove the MC-LR from 1 mg L-1 to levels (0.26-0.35 µg L-1) lower than the WHO recommended limit for drinking water (1 µg L-1). This work reveals the considerable potential of 3D COF based MIPs as promising adsorbents for the extraction and removal of contaminants in complex real samples.

Size-Dependent Deformation and Competition H-Bond Site-Induced Individual Fluorescence Response of a Single-Crystal Three-Dimensional Covalent Organic Framework.

Understanding the individual fluorescence response mechanism of covalent organic frameworks (COFs) at a single-crystal level is of great significance for the rational design of COF-based microsensors but unreachable because all previous COF-based sensors are performed with average fluorescence response behavior of various sized polycrystalline COFs. Herein, we design to explore the fluorescence response of a monodisperse single-crystal COF and further reveal the individual heterogeneity of the response mechanism. Three-dimensional single-crystal COF-301 (SCOF-301) with an intramolecular H-bond-induced excited-state intramolecular proton-transfer effect is selected as a proof-of-concept SCOF. With ethanol, benzene, and ammonia as model analytes, three different deformation and competition H-bond site-induced fluorescence response mechanisms related to crystal size are revealed. Small single particles of SCOF-301 (SSCOF-301) exhibit a more flexible structure, leading to the dominant role of deformation in the fluorescence response of small-sized SSCOF-301. The decreasing flexibility of SSCOF-301 with the increase of crystal size results in involvement of competition of the H-bond site to the fluorescence response besides deformation. Further increase of the crystal size makes the large-sized SSCOF-301 difficult to deform; thus, the competition of the H-bond site dominates the fluorescence response. This work provides a deep understanding of the individual fluorescence response mechanism of COFs to guide the design of a functional COF sensor with suitable size and mechanism for different structural analytes.

Integrating molecular imprinting into flexible covalent organic frameworks for selective recognition and efficient extraction of aflatoxins.

Covalent organic frameworks (COFs) are promising adsorbents for extraction, but their selectivity for molecular recognition remains a challenging issue due to the very limited structural design with rigid structure. Herein, we report an elegant strategy for the design and synthesis of molecularly imprinted flexible COFs (MI-FCOFs) via one-pot reaction between the flexible building block of 2,4,6-tris(4-formylphenoxy)- 1,3,5-triazine and linear 4-phenylenediamine for selective extraction of aflatoxins. The flexible chain structure enabled the developed MI-FCOF to adjust the shape and conformation of frameworks to suit the template molecule, giving high selectivity for aflatoxins recognition. Moreover, MI-FCOF with abundant imprinted sites and function groups exhibited an exceptional adsorption capacity of 258.4 mg g-1 for dummy template which is 3 times that of no-imprinted FCOF (NI-FCOF). Coupling MI-FCOF based solid-phase extraction with high-performance liquid chromatography gave low detection limits of 0.003-0.09 ng mL-1 and good precision with relative standard deviations ≤ 6.7% for the determination of aflatoxins. Recoveries for the spiked rice, corn, wheat and peanut samples were in the range of 85.4%- 105.4%. The high selectivity of the developed MI-FCOF allows matrix-free determination of AFTs in food samples. This work offers a new way to the design of MI-FCOF for selective molecular recognition.

Pore Size Adjustment Strategy for the Fabrication of Molecularly Imprinted Covalent Organic Framework Nanospheres at Room Temperature for Selective Extraction of Zearalenone in Cereal Samples.

Covalent organic frameworks (COFs) are attractive adsorbents for sample pretreatment due to their unique structure and properties. However, the selectivity of COFs for the extraction of hazardous compounds is still limited due to the lack of specific interactions between COFs and targets. Herein, we report a pore size adjustment strategy for room-temperature synthesis of molecularly imprinted COF (MICOF) for selective extraction of zearalenone (ZEN) in complex food samples. The three-dimensional building block tetra(4-aminophenyl) methane was used as a functional monomer, while dialdehyde monomers with different numbers of benzene ring were used to adjust the pore size of MICOF to match with the size of ZEN molecules. The prepared MICOF gave the largest adsorption capacity of 177.2 mg g-1 and the highest imprinting factor of 10.1 for ZEN so far. MICOF was used as the adsorbent for dispersed solid-phase extraction in combination with high-performance liquid chromatography for the determination of trace ZEN in cereals. The high selectivity of the developed method allows simple aqueous standard calibration for the matrix effect-free determination of ZEN in food samples. The limit of detection and the recoveries of the developed method were 0.21 µg kg-1 and 93.7-101.4%, respectively. The precision for the determination of ZEN was less than 3.8% (RSD, n = 6). The developed method is promising for the selective determination of ZEN in complex matrices.

Pure Covalent-Organic Framework Membrane as a Label-Free Biomimetic Nanochannel for Sensitive and Selective Sensing of Chiral Flavor Substances.

Chiral flavor substances play an important role in the human perception of different tastes. Here, we report a pure covalent-organic framework (COF) membrane nanochannel in combination with a chiral gold nanoparticles (AuNPs) selector for sensing chiral flavor substances. The pure COF membrane with a proper pore size is selected as the nanochannel, while l-cysteine-modified AuNPs (l-Cys-AuNPs) are used as the chiral selector. l-Cys-AuNPs show stronger binding to the S-enantiomer than the R-enantiomer, causing current reduction to different degrees for the R- and S-enantiomer to achieve chiral sensing due to the synergistic effect of the size exclusion of the COF nanochannel and the chiral selectivity of l-Cys-AuNPs. The developed COF membrane nanochannel sensing platform not only allows an easy balance of the permeability and selectivity, which is difficult to achieve in traditional polymer membrane nanochannel sensors, but also exhibits better chiral performance than commercial artificial anodic aluminum oxide (AAO) nanochannel sensors. The developed nanochannel sensor is successfully applied for sensing flavor enantiomers such as limonene, propanediol, methylbutyric acid, and butanol with the enantiomer excess values of 55.2% (propanediol) and 72.4% (limonene) and the low detection limits of 36 (limonene) and 71 (propanediol) ng L-1. This study provides a new idea for the construction of nanochannel platforms based on the COF for sensitive and selective chiral sensing.

General Two-Step Method for the Fabrication of Covalent-Organic Framework-Bound Open-Tubular Capillary Columns for High-Resolution Gas Chromatography Separation of Isomers.

Covalent organic frameworks (COFs) are promising as stationary phases for gas chromatography (GC). The successful anchoring of COFs to the inner walls of the capillary with good uniformity is an important prerequisite to ensure the excellent separation performance of columns. However, current methods for the fabrication of COF-based capillary columns cannot always meet this requirement when faced with different COFs, which hampers the further development of COF-based GC stationary phases. Here, we show a general two-step method for the fabrication of COF-bound capillary column. The first step enables the formation of uniform amorphous polymer layer on the inner walls of capillary, while the second step allows the facile transformation of the amorphous polymer layer into a highly crystalline COF layer. COF-bound capillary columns with different framework structures were fabricated successfully by the developed two-step method. Impressively, the COF layers bound on the inner walls of these capillary columns showed good uniformity and high crystallinity. More importantly, as an example, the fabricated Tab-DHTA-bound capillary column showed good resolution (R > 1.5) and high column efficiency (700-39,663 plates m-1) for the tested isomers of ethylbenzene, xylene, dichlorobenzene, chlorotoluene, pinene, 1,3-dichloropropene, and propylbenzene with good precision (RSD, run-to-run, n = 5) (retention time, 0.2-0.6%; peak area, 0.5-1.1%; and peak height, 0.5-1.4%). In general, the fabricated Tab-DHTA-bound capillary column exhibited better performance for the separation isomers than commercial columns DB-5 and HP-FFAP. These results indicate that the two-step method is an efficient way to fabricate the COF-bound capillary column with excellent separation performance.

Biomass-derived carbon dots with light conversion and nutrient provisioning capabilities facilitate plant photosynthesis.

Carbon dots (CDs)-enabled agriculture has been developing rapidly, but small-scale synthesis and high costs hinder the agricultural application of CDs. Herein, biomass-derived carbon dots (B-CDs) were prepared on a gram-level with low cost, and these B-CDs significantly improved crop photosynthesis. The B-CDs, exhibiting small size and blue fluorescence, were absorbed by crops and enhanced photosynthesis via light-harvesting. Foliar application of B-CDs (10 mg·kg-1) could promote chlorophyll synthesis (30-100 %), Ferredoxin (Fd, 40-80 %), Rubisco enzyme (20-110 %) and upregulated gene expression (20-70 %), resulting in higher net photosynthetic rates (130-300 %), dry biomass (160-300 %) and fresh biomass (80-150 %). Further, the B-CDs could increase crop photosynthesis under nutrient deficient conditions, which was attributed to the release of nutrients from B-CDs. Therefore, the B-CDs enhanced the photosynthesis via enhancing light conversion and nutrient supply. This study provides a promising material capable of enhancing photosynthesis for sustainable agriculture production.

Surface imprinted-covalent organic frameworks for efficient solid-phase extraction of fluoroquinolones in food samples.

Molecularly imprinting on covalent organic frameworks (MI-COF) is a promising way to prepare selective adsorbents for effective extraction of fluoroquinolones (FQs). However, the unstable framework structure and complex imprinting process are challenging for the construction of MI-COF. Here, we report a facile surface imprinting approach with dopamine to generate imprinted cavities on the surface of irreversible COF for highly efficient extraction of FQs in food samples. The irreversible-linked COF was fabricated from hexahydroxytriphenylene and tetrafluorophthalonitrile to ensure COF stability. Moreover, the introduction of dopamine surface imprinted polymer into COF provides abundant imprinted sites and endows excellent selectivity for FQs recognition against other antibiotics. Taking enrofloxacin as a template molecule, the prepared MI-COF gave an exceptional adsorption capacity of 581 mg g-1, a 2.2-fold enhancement of adsorption capacity compared with nonimprinted COF. The MI-COF was further explored as adsorbent to develop a novel solid-phase extraction method coupled with high-performance liquid chromatography for the simultaneous determination of enrofloxacin, norfloxacin and ciprofloxacin. The developed method gave the low limits of detection at 0.003-0.05 ng mL-1, high precision with relative standard deviations less than 3.5%. The recoveries of spiked FQs in food samples ranged from 80.4% to 110.7%.

Trifluoromethyl-Functionalized 2D Covalent Organic Framework for High-Resolution Separation of Isomers.

Development of novel functional materials for effective isomer separation is of great significance in environmental science, chemical industry, and life science due to the different functions of isomers. However, the similar physicochemical properties of isomers make their separation greatly challenging. Here, we report the fabrication of trifluoromethyl-functionalized 2D covalent organic framework (COF) TpTFMB with 2,2'-bis(trifluoromethyl)benzidine (TFMB) and 1,3,5-triformylphloroglucinol (Tp) for the separation of isomers. TpTFMB was in situ-grown on the inner surface of a capillary for the high-resolution separation of isomers. The introduction of hydroxyl and trifluoromethyl functional groups with uniform distribution in 2D COFs is a powerful tactic to endow TpTFMB with various functions such as hydrogen bonding, dipole interaction, and steric effect. The prepared TpTFMB capillary column enabled the baseline separation of positional isomers such as ethylbenzene and xylene, chlorotoluene, carbon chain isomers such as butylbenzene and ethyl butanoate, and cis-trans isomers 1,3-dichloropropene. The hydrogen-bonding, dipole, and π-π interactions as well as the structure of COF significantly contribute to the isomer separation. This work provides a new strategy for designing functional 2D COFs for the efficient separation of isomers.

Particle Size Regulation of Single-Crystalline Covalent Organic Frameworks for High Performance of Gas Chromatography.

Although polycrystalline covalent organic frameworks (PCOFs) have already shown great potential as stationary phases for chromatography, irregular shape and size distribution of PCOFs make regulation of particle size of PCOFs for high separation performance impossible, which is accessible by the application of single-crystalline COFs (SCOFs). Herein, we showed preparation of three-dimensional SCOF (SCOF-303) bonded capillaries (SCOF-303-capillary) with different particle sizes (about 0.4-1.6 µm) and further investigated gas chromatographic separation ability of these SCOF-303-capillaries for isomers of xylene, dichlorobenzene, and pinene. It was found resolution and column efficiency of SCOF-303-capillaries for isomers decreased with the increase in particle size, mainly resulting from the weaker size-exclusion effect and higher mass transfer resistance of the larger particle size of flexible SCOF-303. The obtained SCOF-303-capillary (particle size of ∼0.4 µm) offered baseline separation of xylene isomers with the high resolution of 2.26-3.52, great efficiency of 7879 plates m-1 for p-xylene, better than PCOF-303-capillary, and commercial DB-5 and HP-FFAP capillary columns as well as many reported capillaries. This work not only shows the great potential of SCOFs for gas chromatography but also provides the theoretical direction for the design of the efficient COF based stationary phase by adjusting the particle sizes.

Irreversible fluorine covalent organic framework based probe nanoelectrospray ionization mass spectrometry for direct and rapid determination of perfluoroalkyl carboxylic acids.

Probe nanoelectrospray ionization mass spectrometry (PESI-MS) is practically desirable for rapid and ultra-sensitive analysis of trace contaminants in environment, but limited with the stable and selective probe coating. Herein, we show the design and preparation of irreversible fluorine-based covalent organic framework (TFPPA-F4) covalently bonded probe to couple with ESI-MS (TFPPA-F4-PESI-MS) for direct and rapid determination of perfluoroalkyl carboxylic acids (PFCAs) in environmental water. Chemical bonding coating of irreversible crystalline TFPPA-F4 not only improved stability of the probe, but also offered accessible multiple interactions including hydrophobic, hydrogen bonding and F-F interactions to promote the kinetics and selectivity for PFCAs. The proposed TFPPA-F4-PESI-MS realized rapid determination of PFCAs (about 4 min) with low limits of detection of 0.06-0.88 ng L-1 and wide linear range of 1-5000 ng L-1 (R2 of 0.9982-0.9998). Recoveries for the spiked lake and pond water were 85.9-111.1 %. TFPPA-F4 based probe can maintain the extraction performance after 100 times of extraction. This work shows the great potential of the irreversible covalent organic framework based PESI-MS in rapid and ultra-sensitive determination of contaminants in environmental samples.

Cicada-Wing-Inspired Highly Sensitive Tactile Sensors Based on Elastic Carbon Foam with Nanotextured Surfaces.

Electronic devices with tactile and pressure-sensing capabilities are becoming increasingly popular in the automatic industry, human motion/health monitoring, and artificial intelligence applications. Inspired by the natural nanotopography of the cicada wing, we propose here a straightforward strategy to fabricate a highly sensitive tactile sensor through nanotexturing of erected polyaniline (PANI) nanoneedles on a conductive and elastic three-dimensional (3D) carbon skeleton. The robust and compressible carbon networks offer a resilient and conducting matrix to catering complex scenarios; the biomimetic PANI nanoneedles firmly and densely anchored on a 3D carbon skeleton provide intimate electrical contact under subtle deformation. As a result, a piezoresistive tactile sensor with ultrahigh sensitivity (33.52 kPa-1), fast response/recovery abilities (97/111 ms), and reproducible sensing performance (2500 cycles) is developed, which is capable of distinguishing motions in a wide pressure range from 4.66 Pa to 60 kPa, detecting spatial pressure distribution, and monitoring various gestures in a wireless manner. These excellent performances demonstrate the great potential of nature-inspired tactile sensors for practical human motion monitoring and artificial intelligence applications.

Silicon Nanodots Increase Plant Resistance against Herbivores by Simultaneously Activating Physical and Chemical Defenses.

Nanosilicon applications have been shown to increase plant defenses against both abiotic and biotic stresses. Silicon quantum nanodots (Si NDs), a form of nanosilicon, possess excellent biological and physiochemical properties (e.g., minimal size, high water solubility, stability, and biocompatibility), potentially making them more efficient in regulating plant responses to stress than other forms of silicon. However, to date, we still lack mechanistic evidence for how soil-applied Si NDs alter the regulation of plant physical and chemical defenses against insect herbivores. To address this gap, we compared the effect of fluorescent amine-functionalized Si NDs (5 nm) and the conventional fertilizer sodium silicate on maize (Zea mays L.) physical and chemical defenses against the oriental armyworm (Mythimna separata, Walker) caterpillars. We found that 50 mg/kg Si NDs and sodium silicate additions inhibited the growth of caterpillars the most (35.7% and 22.8%, respectively) as compared to other application doses (0, 10, and 150 mg/kg). Both Si NDs and silicate addition activated biosynthesis genes responsible for chemical (benzoxazinoids) and physical (lignin) defense production. Moreover, Si NDs upregulated the gene expression of antioxidant enzymes (SOD, CAT, and POD) and promoted the antioxidant metabolism (flavonoids) in maize leaves under M. separata attack. Finally, we show that, under field conditions, Si ND addition increased maize cob weight (28.7%), cob grain weight (40.8%), and 100-grain weight (26.5%) as compared to the control, and more so than the conventional silicon fertilizer. Altogether, our findings highlight the potential for Si NDs to be used as an effective and ecofriendly crop protection strategy in agroecosystems.

Building-block exchange synthesis of amino-based three-dimensional covalent organic frameworks for gas chromatographic separation of isomers.

Thermally stable three-dimensional covalent organic frameworks (3D COFs) with rich pores of channels and cages are promising as stationary phases for gas chromatography (GC), which has not been explored. Here we synthesize the first amino-based 3D COF and its covalently bonded capillary via building-block exchange for GC separation of isomers.

Integrating Ordered Two-Dimensional Covalent Organic Frameworks to Solid-State Nanofluidic Channels for Ultrafast and Sensitive Detection of Mercury.

Grafting specific recognition moieties onto solid-state nanofluidic channels is a promising way for selective and sensitive sensing of analytes. However, the time-consuming interaction between recognition moieties and analytes is the main hindrance to the application of nanofluidic channel-based sensors in rapid detection. Here, we show the integration of ordered two-dimensional covalent organic frameworks (2D COFs) to solid-state nanofluidic channels to achieve rapid, selective, and sensitive detection of contaminants. As a proof of concept, a thiourea-linked 2D COF (JNU-3) as the recognition unit is covalently bonded on the stable artificial anodic aluminum oxide nanochannels (AAO) to fabricate a JNU-3@AAO-based nanofluidic sensor. The rapid and selective interaction of Hg(II) with the highly ordered channels of JNU-3 allows the JNU-3@AAO-based nanofluidic sensor to realize ultrafast and precise determination of Hg(II) (90 s) with a low limit of detection (3.28 fg mL-1), wide linear range (0.01-100 pg mL-1), and good precision (relative standard deviation of 3.8% for 11 replicate determination of 10 pg mL-1). The developed method was successfully applied to the determination of mercury in a certified reference material A072301c (rice powder), real water, and rice samples with recoveries of 90.4-99.8%. This work reveals the great potential of 2D COFs-modified solid-state nanofluidic channels as a sensor for the rapid and precise detection of contaminants in complicated samples.

Hydroxyl-functionalized three-dimensional covalent organic framework for selective and rapid extraction of organophosphorus pesticides.

The wide utilization of organophosphorus pesticides (OPPs) results in a potential threat to ecosystem and human health. The essential extraction process in practical OPPs analysis always suffers from the low efficiency due to the limited accessible active sites and interactions in the adsorbents. Here, we report a rational design and synthesis of a novel hydroxyl-functionalized three-dimensional covalent organic framework (3D COF-OH) named JNU-6 with ordered porous structure and multiple interactions as the adsorbent for rapid and selective dispersive solid phase extraction (DSPE) of OPPs. The 3D COF-OH based DSPE was coupled with gas chromatography-flame thermionic detection (GC-FTD) for the determination of four selected OPPs with low limits of detection of 0.15-0.39 ng mL-1, wide linear range of 1-1100 ng mL-1. The developed method gave good precision (relative standard deviation of 1.6-8.5% (n = 5)) and recoveries of 86-106% for the determination of OPPs in complicated fruit and vegetable samples. This work reveals the high practical potential of functionalized 3D COFs as adsorbents for effective extraction of trace contaminants in complicated samples.

Post-modification of covalent organic framework for gas chromatographic separation of isomers.

Separation of isomers is important in diverse areas such as life science, chemical industry, pharmaceutical and environmental science, but still challenging due to their similar physicochemical properties. Development of new stationary phases is an effective way to improve the performance of chromatography for the separation of isomers. Here, we report the post-modification of a new hydroxyl-functionalized covalent organic framework (COF) TzDHNDA with [(1-phenylethyl)amino]acetic acid (PEAA) via esterification reaction to construct PEAA functionalized COF (TzDHNDA-PEAA). The prepared TzDHNDA-PEAA was stable up to 380 °C and used as stationary phase to make TzDHNDA-PEAA coated capillary column for gas chromatographic separation of isomers. The TzDHNDA-PEAA coated capillary column showed a high column efficiency for n-dodecane (12417 plates m-1, 120 °C) and high resolution separation of the isomers of fluoroaniline (Rm-/o-=3.2, Rp-/m-=2.4), chloroaniline (Rm-/o-=5.7, Rp-/m-=1.8), nitrotoluene (Rp-/o-=2.2, Rm-/p-=1.7), pinene (Rß-/α-=2.4), ionone (Rß-/α-=4.8) and 1,3-dichloropropene (RE-/Z-=2.0). The fabricated column offered better separation of chloroaniline isomers than commercial capillary columns InertCap WAX, InertCap 1701 and InertCap 5. The introduced benzene ring, secondary amine and carbonyl groups of PEAA into the COF TzDHNDA significantly improved the resolution of isomers due to the enhanced hydrogen-bonding and π-π interactions. This work shows that post-modification strategy is an effective way to prepare novel COFs for chromatographic separation of isomers.

Urea-linked covalent organic framework functionalized polytetrafluoroethylene film for selective and rapid thin film microextraction of rhodamine B.

Incorporation of highly selective and stable adsorbent with facile extraction technology is desired in practical analysis. Here we show the rational preparation of a urea-linked covalent organic framework functionalized polytetrafluoroethylene film (COF-117-PTFE) with ordered porous structure, rich functional groups, and large surface area-to-volume ratio as the effective adsorbent for convenient, selective and rapid thin film microextraction (TFME) of rhodamine B (RB). The COF-117-PTFE based TFME coupled with high performance liquid chromatography-fluorescence detector (HPLC-FLD) successfully realized the determination of RB with the limit of detection of 0.007 µg L-1, the linear range of 0.1 - 100 µg L-1. The relative standard deviation (RSD) of intraday (n = 5) and interday (n = 5) for the determination of 10 µg L-1 RB were 2.3% and 6.8%, respectively. The absolute recoveries were 80.3%, 71.2% and 67.9% in river water, chili powder and Sichuan pepper powder, respectively. The recoveries for RB spiking in complicated real samples (dry chili, chili powder, dry Sichuan pepper, Sichuan pepper powder and river water) ranged from 90.4% to 107.5%. The developed COF-117-PTFE based TFME-HPLC-FLD method is promising in practical application. This work reveals the high potential of functionalized COF film as the adsorbent for effective extraction of trace contaminants in complicated samples.