MXene Lubricated Tribovoltaic Nanogenerator with High Current Output and Long Lifetime.

Tribovoltaic nanogenerators (TVNGs) have the characteristics of high current density, low matched impedance and continuous output, which is expected to solve the problem of power supply for small electronic devices. However, wear occurrence in friction interface will seriously reduce the performance of TVNGs as well as lifetime. Here, we employ MXene solution as lubricate to improve output current density and lifetime of TVNG simultaneously, where a high value of 754 mA m-2 accompanied with a record durability of 90,000 cycles were achieved. By comparing multiple liquid lubricates with different polarity, we show that conductive polar liquid with MXene as additive plays a crucial role in enhancing the electrical output performance and durability of TVNG. Moreover, the universality of MXene solution is well demonstrated in various TVNGs with Cu and P-type Si, and Cu and N-GaAs as material pairs. This work may guide and accelerates the practical application of TVNG in future.

Contact efficiency optimization for tribovoltaic nanogenerators.

Energy harvesters based on the tribovoltaic effect that can convert mechanical energy into electricity offer a potential solution for the energy supply of decentralized sensors. However, a substantial disparity in output current, exceeding 106 times, exists between micro- and macro-contact tribovoltaic nanogenerators (TVNGs). To tackle this challenge, we develop a quantification method to determine the effective contact efficiency of conventional large-scale TVNGs, revealing a mere 0.038% for a TVNG of 1 cm2. Thus, we implement an optimization strategy by contact interface design resulting in a remarkable 65-fold increase in effective contact efficiency, reaching 2.45%. This enhancement leads to a current density of 23 A m-2 and a record-high charge density of 660 mC m-2 for the TVNG based on Cu and p-type silicon. Our study reveals that increasing the effective contact efficiency will not only address the existing disparities but also have the potential to significantly enhance the output current in future advancements of large-scale TVNGs.

Successive walnut plantations alter soil carbon quantity and quality by modifying microbial communities and enzyme activities.

Knowledge of the spatial-temporal variations of soil organic carbon (SOC) quantity and quality and its microbial regulation mechanisms is essential for long-term SOC sequestration in agroecosystems; nevertheless, this information is lacking in the process of walnut plantations. Here, we used the modified Walkley-Black method, phospholipid fatty acid analysis, and micro-plate enzyme technique to analyze the evolution of SOC stocks and quality/lability as well as microbial communities and enzyme activities at different soil depths in walnut plantations with a chronosequence of 0-, 7-, 14-, and 21-years in the Eastern Taihang Mountains, China. The results indicated that long-term walnut plantations (14-and 21-years) enhanced SOC stocks, improved SOC quality/lability (as indicated by the lability index), and promoted microbial growth and activities (i.e., hydrolase and oxidase activities) in the 0-40 cm soil layers. Besides, these above-mentioned SOC-and microbial-related indices (except for oxidase activities) decreased with increasing soil depths, while oxidase activities were higher in deeper soils (40-60 cm) than in other soils (0-40 cm). The partial least squares path model also revealed that walnut plantation ages and soil depths had positive and negative effects on microbial attributes (e.g., enzyme activities, fungal and bacterial communities), respectively. Meanwhile, the SOC stocks were closely related to the fungal community; meanwhile, the bacterial community affected SOC quality/liability by regulating enzyme activities. Comprehensively, long-term walnut plantations were conducive to increasing SOC stocks and quality through altering microbial communities and activities in the East Taihang Mountains in Hebei, China.

Improving Degradation Efficiency of Organic Pollutants through a Self-Powered Alternating Current Electrocoagulation System.

Although electrocoagulation technology has been widely researched in wastewater treatment, high energy consumption and electrode passivation are still the main challenges for its widespread applications. Here, we propose a self-powered electrocoagulation system based on a triboelectric nanogenerator (TENG) with alternating current (AC) outputs to solve these two issues, and thus enhance the removal efficiency of organic pollutants. Compared with the direct current source, the AC power source can reduce the electrode passivation, produce more aluminum hydroxide compounds after consuming an equal amount of charges, and thus improve the degradation efficiency. Moreover, the removal efficiency can be further enhanced by decreasing the frequency AC, in which a 5.7-fold improvement was achieved at 0.2 Hz compared to DC at 1.8 Hz. Inspired by the low frequency of ocean wave water, we developed a self-powered AC-electrocoagulation system to directly drive the electrocoagulation reaction by harvesting water wave energy, which can effectively remove 94.8% of xylenol orange and 98.8% of water-oil emulsion, and thus completely address the problem of energy consumption. This study further promotes the application of self-powered electrochemical systems in treating environmental pollution.