Fiber-optic immunosensor based on a Fabry-Perot interferometer for single-molecule detection of biomarkers.

Immunosensors capable of ultralow-concentration and single-molecule detection of biomarkers are garnering attention for the early diagnosis of cancer. Herein, a fiber-optic Fabry-Perot interferometer (FPI)-based immunosensor was used for the first time for single-molecule detection of progastrin-releasing peptide (ProGRP). The cascaded FPI structure of the immunosensor introduces a high-order harmonic Vernier effect (HVE). A piece of a side-polished D-shaped hollow-core photonic crystal fiber (HCPCF) was used as a sensing FPI, on which the biomarker was deposited to detect ProGRP. Compared with traditional FPIs with open-cavity structures, this structure provided a larger contact area and improved the sensitivity of the immunosensor. The polished side surface of the D-shaped HCPCF was modified using a gold nanoparticle-graphene oxide (AuNP@GO) nanointerface to enhance refractive index (RI) modulation via antigen-antibody binding and achieve selective energy enhancement of the binding site. The antigen binding changes the RI of the D-shaped HCPCF and the effective RI of the transmitted light in the sensing FPI, thereby changing the spectrum of the immunosensor. Experimental results showed that the high-order HVE and AuNP@GO nanointerface considerably improved the immunosensor sensitivity, exhibiting a liquid RI sensitivity of 583,000 nm/RIU. After functionalization with an anti-ProGRP antibody, the limit of detection of the immunosensor for ProGRP reached 17.1 ag/mL; moreover, the immunosensor could perform detection at the single-molecule level. The proposed novel immunosensor overcomes the sensitivity limitations of optical devices and achieves single-molecule detection of a protein.

Ultrasensitive refractive index fiber sensor based on high-order harmonic Vernier effect and a cascaded FPI.

This paper proposes and demonstrates an ultrasensitive refractive index (RI) sensor based on harmonic Vernier effect (HEV) and a cascaded Fabry-Perot interferometer (FPI). The sensor is fabricated by sandwiching a hollow-core fiber (HCF) segment between a lead-in single-mode fiber (SMF) pigtail and a reflection SMF segment with an offset of 37 µm between two fiber centers to form a cascaded FPI structure, where the HCF is the sensing FPI, and the reflection SMF is the reference FPI. To excite the HEV, the optical path of the reference FPI must be multiple times (>1) that of the sensing FPI. Several sensors have been made to conduct RI measurements of gas and liquid. The sensor's ultrahigh RI sensitivity of up to ∼378000 nm/RIU can be achieved by reducing the detuning ratio of the optical path and increasing the harmonic order. This paper also proved that the proposed sensor with a harmonic order of up to 12 can increase the fabricated tolerances while achieving high sensitivity. The large fabrication tolerances greatly increase the manufacturing repeatability, reduce production costs, and make it easier to achieve high sensitivity. In addition, the proposed RI sensor has advantages of ultrahigh sensitivity, compactness, low production cost (large fabrication tolerances), and capability to detect gas and liquid samples. This sensor has promising potentials for biochemical sensing, gas or liquid concentration sensing, and environmental monitoring.

Ultrasensitive cascaded in-line Fabry-Perot refractometers based on a C-shaped fiber and the Vernier effect.

We propose and experimentally demonstrate a fiber refractometer based on a C-shaped fiber and the Vernier effect. The sensor is fabricated by cascading a single mode fiber (SMF) pigtail together with a C-shaped fiber segment and another SMF segment. Thus, the C-shaped fiber would constitute an open cavity (sensing cavity) in which test analytes could be filled, while the SMF segment would constitute another reference cavity. Due to the similar optical path length of these two cavities, the Vernier effect would be activated, thus forming spectral envelops in the reflection spectrum of the sensor. Variations in the refractive index (RI) of analytes would result in the shifts of the spectral envelops. Both theoretical calculations and experiments are carried out in the characterization of the sensor measuring liquid and gaseous analytes. The experimental sensitivity of the sensor is found to be ∼37238 nm/RIU for gas RI measurement. The proposed sensor features the advantages such as ease of fabrication, extremely high sensitivity, capability of sensing of both gaseous and liquid analytes, small footprint, and good mechanical strength. Compared to other existing Vernier effect-based fiber refractometers typically fabricated using PCFs, the proposed sensor would allow analytes to have much easier and quicker access to the sensor probe.