Electric Field-Induced Quenching of MAPbI3 Photoluminescence in PeLED Architecture.

Photoluminescence (PL) measurements are a widely used technique for the investigation of perovskite-based materials and devices. Although electric field-induced PL quenching provides additional useful information, this phenomenon is quite complex and not yet clearly understood. Here, we address the PL quenching of methylammonium lead iodide (MAPbI3) perovskite in a light-emitting diode (PeLED) architecture. We distinguish two quenching mechanisms: (a) indirect quenching by slow irreversible or partially reversible material changes that occur gradually under the applied light and electric field and (b) direct quenching by the influence of the electric field on the charge carrier densities, their spatial distributions, and radiative recombination rates. Direct quenching, observed under the abrupt application of negative voltage, causes a decrease of the PL intensity. However, the PL intensity then partially recovers within tens of milliseconds as mobile ions screen the internal electric field. The screening time increases to hundreds of seconds at low temperatures, indicating activation energies for ion motion of about 80 meV. On the other hand, ultrafast time-resolved PL measurements revealed two main phases of direct quenching: an instantaneous reduction in the radiative carrier recombination rate, which we attribute to the electron and hole displacement within individual perovskite grains, followed by a second phase lasting hundreds of picoseconds, which is due to the charge carrier extraction and spatial separation of electron and hole "clouds" within the entire perovskite layer thickness.

Mechanical force drives the initial mesenchymal-epithelial interaction during skin organoid development.

Rationale: Stem cells self-organize to form organoids that generate mini-organs that resemble the physiologically-developed ones. The mechanism by which the stem cells acquire the initial potential for generating mini-organs remains elusive. Here we used skin organoids as an example to study how mechanical force drives initial epidermal-dermal interaction which potentiates skin organoids to regenerate hair follicles. Methods: Live imaging analysis, single-cell RNA-sequencing analysis, and immunofluorescence were used to analyze the contractile force of dermal cells in skin organoids. Bulk RNA-sequencing analysis, calcium probe detection, and functional perturbations were used to verify that calcium signaling pathways respond to the contractile force of dermal cells. In vitro mechanical loading experiment was used to prove that the stretching force triggers the epidermal Piezo1 expression which negatively regulates dermal cell attachment. Transplantation assay was used to test the regenerative ability of skin organoids. Results: We found that dermal cell-derived contraction force drives the movement of dermal cells surrounding the epidermal aggregates to trigger initial mesenchymal-epithelial interaction (MEI). In response to dermal cell contraction force, the arrangement of the dermal cytoskeleton was negatively regulated by the calcium signaling pathway which further influences dermal-epidermal attachment. The native contraction force generated from the dermal cell movement exerts a stretching force on the adjacent epidermal cells, activating the stretching force sensor Piezo1 in the epidermal basal cells during organoid culture. Epidermal Piezo1 in turn drives strong MEI to negatively regulate dermal cell attachment. Proper initial MEI by mechanical-chemical coupling during organoid culture is required for hair regeneration upon transplantation of the skin organoids into the back of the nude mice. Conclusion: Our study demonstrated that mechanical-chemical cascade drives the initial event of MEI during skin organoid development, which is fundamental to the organoid, developmental, and regenerative biology fields.

Deciphering the Role of Water in Promoting the Optoelectronic Performance of Surface-Engineered Lead Halide Perovskite Nanocrystals.

Lead halide perovskites are promising candidates for high-performance light-emitting diodes (LEDs); however, their applicability is limited by their structural instability toward moisture. Although a deliberate addition of water to the precursor solution has recently been shown to improve the crystallinity and optical properties of perovskites, the corresponding thin films still do not exhibit a near-unity quantum yield. Herein, we report that the direct addition of a minute amount of water to post-treated formamidinium lead bromide (FAPbBr3) nanocrystals (NCs) substantially enhances the stability while achieving a 95% photoluminescence quantum yield in a NC thin film. We unveil the mechanism of how moisture assists in the formation of an additional NH4Br component. Alongside, we demonstrate the crucial role of moisture in assisting localized etching of the perovskite crystal, facilitating the partial incorporation of NH4+, which is key for improved performance under ambient conditions. Finally, as a proof-of-concept, the application of post-treated and water-treated perovskites is tested in LEDs, with the latter exhibiting a superior performance, offering opportunities toward commercial application in moisture-stable optoelectronics.

Ultra-minimal pinhole blepharoplasty: A minimally invasive technique for the correction of eyelid bags.

OBJECTIVE: The aim of the study was to investigate the efficacy and complications of ultra-minimal pinhole blepharoplasty in the treatment of eyelid bags. METHODS: This retrospective study included patients with eyelid bags treated using a minimally invasive blepharoplasty technique between May 2018 and June 2021. The postoperative course and complications and patient satisfaction were analyzed. RESULTS: A total of 460 patients (136 males and 324 females) were included with a mean age of 42.12 ± 9.76 years. The mean operative time was 24.3 min. After the operation, the patients had no infection, numbness, or lower eyelid varus, valgus, or withdrawal. Nine patients developed transient binocular diplopia, which disappeared 0.5-1 h after surgery. Two patients developed chemosis, which disappeared after therapy. Six months after the operation, 440 (95.65%) patients were satisfied with improvement in their fat bulge. A total of 434 (94.78%) patients were satisfied with improvement in their tear groove. CONCLUSION: Ultra-minimal pinhole blepharoplasty is a safe, effective, and minimally invasive treatment for eyelid bags.

Critical Role of Perovskite Film Stoichiometry in Determining Solar Cell Operational Stability: a Study on the Effects of Volatile A-Cation Additives.

Volatile A-cation halide (AX) additives such as formamidinium chloride and methylammonium chloride have been widely employed for high-efficiency perovskite solar cells (PSCs). However, it remains unstudied how they influence the perovskite film stoichiometry and the solar cell performance and operational stability. Hereby, our work shows that over annealing of formamidinium chloride-containing perovskite films leads to a Pb-rich surface, resulting in a high initial efficiency, which however decays during maximum power point tracking (MPPT). On the contrary, perovskite films obtained by a shorter annealing time at the same temperature provide good stability during MPPT but a lower initial efficiency. Thus, we deduce that an optimal annealing is vital for both high efficiency and operational stability, which is then confirmed in the case where methylammonium chloride additive is used. With optimized perovskite annealing conditions, we demonstrate efficient and stable p-i-n PSCs that show a best power conversion efficiency of 20.7% and remain 90% of the initial performance after a 200 h MPPT at 60 °C under simulated 1 sun illumination with high UV content. Our work presents a comprehensive understanding on how volatile AX impacts perovskite film stoichiometry and its correlation to the device performance and operational stability, providing a new guideline for fabricating high-efficiency and operationally stable PSCs.

Improving the Morphology Stability of Spiro-OMeTAD Films for Enhanced Thermal Stability of Perovskite Solar Cells.

To guarantee a long lifetime of perovskite-based photovoltaics, the selected materials need to survive relatively high-temperature stress during the solar cell operation. Highly efficient n-i-p perovskite solar cells (PSCs) often degrade at high operational temperatures due to morphological instability of the hole transport material 2,2',7,7'-tetrakis (N,N-di-p-methoxyphenyl-amine)9,9'-spirobifluorene (Spiro-OMeTAD). We discovered that the detrimental large-domain spiro-OMeTAD crystallization is caused by the simultaneous presence of tert-butylpyridine (tBP) additive and gold (Au) as a capping layer. Based on this discovery and our understanding, we demonstrated facile strategies that successfully stabilize the amorphous phase of spiro-OMeTAD film. As a result, the thermal stability of n-i-p PSCs is largely improved. After the spiro-OMeTAD films in the PSCs were stressed for 1032 h at 85 °C in the dark in nitrogen environment, reference PSCs retained only 22% of their initial average power conversion efficiency (PCE), while the best target PSCs retained 85% relative average PCE. Our work suggests facile ways to realize efficient and thermally stable spiro-OMeTAD containing n-i-p PSCs.

All-Evaporated, All-Inorganic CsPbI3 Perovskite-Based Devices for Broad-Band Photodetector and Solar Cell Applications.

Following the rapid increase of organic metal halide perovskites toward commercial application in thin-film solar cells, inorganic alternatives attracted great interest with their potential of longer device lifetime due to the stability improvement under increased temperatures and moisture ingress. Among them, cesium lead iodide (CsPbI3) has gained significant attention due to similar electronic and optical properties to methylammonium lead iodide (MAPbI3), with a band gap of 1.7 eV, high absorption coefficient, and large diffusion length, while also offering the advantage of being completely inorganic, providing a higher thermal stability and preventing material degradation. On a device level, however, it seems also essential to replace organic transport layers by inorganic counterparts to further prevent degradation. In addition, devices are mostly fabricated by spin coating, limiting their reproducibility and scalability; in this case, exploring all-evaporated devices allows us to improve the quality of the layers and to increase their reproducibility. In this work, we focus on the deposition of CsPbI3 by CsI and PbI2 co-evaporation. We fabricate devices with an all-inorganic, all-evaporated structure, employing NiO and TiO2 as transport layers, and evaluate these devices for both photodetector and solar cell applications. As a photodetector, low leakage current, high external quantum efficiency (EQE) and detectivity, and fast rise and decay times were obtained, while as a solar cell, acceptable efficiencies were achieved. These all-inorganic, all-evaporated devices represent one step forward toward higher stability and reproducibility while enabling large area compatibility and easier integration with other circuitry and, in future, the possible commercialization of perovskite-based technology.

Mitigating Dark Current for High-Performance Near-Infrared Organic Photodiodes via Charge Blocking and Defect Passivation.

Thin-film organic near-infrared (NIR) photodiodes can be essential building blocks in the rapidly emerging fields including the internet of things and wearable electronics. However, the demonstration of NIR organic photodiodes with not only high responsivity but also low dark current density that is comparable to that of inorganic photodiodes, for example, below 1 nA cm-2 for silicon photodiodes, remains a challenge. In this work, we have demonstrated non-fullerene acceptor-based NIR photodiodes with an ultralow dark current density of 0.2 nA cm-2 at -2 V by innovating on charge transport layers to mitigate the reverse charge injection and interfacial defect-induced current generation. The same device also shows a high external quantum efficiency approaching 70% at 850 nm and a specific detectivity of over 1013 Jones at wavelengths up to 940 nm. Furthermore, the versatility of our approach for mitigating dark current is demonstrated using a NIR photodetector utilizing different non-fullerene systems. Finally, the practical application of NIR organic photodiodes is demonstrated with an image sensor integrated on a silicon CMOS readout. This work provides new insight into the device stack design of low-dark current NIR organic photodiodes for weak light detection.

Case Report: A Nasopharyngeal Cancer Patient Got COVID-19 During Radiochemotherapy in Wuhan.

The coronavirus disease (COVID-19) infection, caused by the novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has spread worldwide. Reports of COVID-19 among cancer patients are limited and most studies focus mainly on its epidemiological and clinical features. In this study, we report the case of a nasopharyngeal cancer patient from Wuhan who contracted COVID-19 during radiochemotherapy and has since recovered from the infection. We hope that this report will provide valuable insight into the treatment of SARS-CoV-2-infected cancer patients through an account of our experience.

Two-dimensional perovskites with alternating cations in the interlayer space for stable light-emitting diodes.

Lead halide perovskites have attracted tremendous attention in photovoltaics due to their impressive optoelectronic properties. However, the poor stability of perovskite-based devices remains a bottleneck for further commercial development. Two-dimensional perovskites have great potential in optoelectronic devices, as they are much more stable than their three-dimensional counterparts and rapidly catching up in performance. Herein, we demonstrate high-quality two-dimensional novel perovskite thin films with alternating cations in the interlayer space. This innovative perovskite provides highly stable semiconductor thin films for efficient near-infrared light-emitting diodes (LEDs). Highly efficient LEDs with tunable emission wavelengths from 680 to 770 nm along with excellent operational stability are demonstrated by varying the thickness of the interlayer spacer cation. Furthermore, the best-performing device exhibits an external quantum efficiency of 3.4% at a high current density (J) of 249 mA/cm2 and remains above 2.5% for a J up to 720 mA cm-2, leading to a high radiance of 77.5 W/Sr m2 when driven at 6 V. The same device also shows impressive operational stability, retaining almost 80% of its initial performance after operating at 20 mA/cm2 for 350 min. This work provides fundamental evidence that this novel alternating interlayer cation 2D perovskite can be a promising and stable photonic emitter.

Skin Cyst: A Pathological Dead-End With a New Twist of Morphogenetic Potentials in Organoid Cultures.

A cyst is a closed sac-like structure in which cyst walls wrap certain contents typically including air, fluid, lipid, mucous, or keratin. Cyst cells can retain multipotency to regenerate complex tissue architectures, or to differentiate. Cysts can form in and outside the skin due to genetic problems, errors in embryonic development, cellular defects, chronic inflammation, infections, blockages of ducts, parasites, and injuries. Multiple types of skin cysts have been identified with different cellular origins, with a common structure including the outside cyst wall engulfs differentiated suprabasal layers and keratins. The skin cyst is usually used as a sign in pathological diagnosis. Large or surfaced skin cysts affect patients' appearance and may cause the dysfunction or accompanying diseases of adjacent tissues. Skin cysts form as a result of the degradation of skin epithelium and appendages, retaining certain characteristics of multipotency. Surprisingly, recent organoid cultures show the formation of cyst configuration as a transient state toward more morphogenetic possibility. These results suggest, if we can learn more about the molecular circuits controlling upstream and downstream cellular events in cyst formation, we may be able to engineer stem cell cultures toward the phenotypes we wish to achieve. For pathological conditions in patients, we speculate it may also be possible to guide the cyst to differentiate or de-differentiate to generate structures more akin to normal architecture and compatible with skin homeostasis.

Touchscreen tags based on thin-film electronics for the Internet of Everything.

Capacitive touchscreens are increasingly widespread, featuring in mobile phones and tablets, as well as everyday objects such as cars and home appliances. As a result, the interfaces are uniquely placed to provide a means of communication in the era of the Internet of Everything. Here we show that commercial touchscreens can be used as reader interfaces for capacitive coupled data transfer. The transfer of data to the touchscreen is achieved using a 12-bit thin-film capacitive radio frequency identification tag powered by a thin-film battery or a thin-film photovoltaic cell that converts light from the screen. The thin-film integrated circuit has a 0.8 cm2 on-chip monolithic antenna, employs 439 transistors, and dissipates only 31 nW of power at a supply voltage of 600 mV. The chip has an asynchronous data rate of up to 36 bps, which is limited by the touchscreen readout electronics.

Model for the Prediction of the Lifetime and Energy Yield of Methyl Ammonium Lead Iodide Perovskite Solar Cells at Elevated Temperatures.

With the realization of highly efficient perovskite solar cells, the long-term stability of these devices is the key challenge hindering their commercialization. In this work, we study the temperature-dependent stability of perovskite solar cells and develop a model capable of predicting the lifetime and energy yield of perovskite solar cells outdoors. This model results from the measurement of the kinetics governing the degradation of perovskite solar cells at elevated temperatures. The individual analysis of all key current-voltage parameters enables the prediction of device performance under thermal stress with high precision. An extrapolation of the device lifetime at various European locations based on historical weather data illustrates the relation between the laboratory data and real-world applications. Finally, the understanding of the degradation mechanisms affecting perovskite solar cells allows the definition and implementation of strategies to enhance the thermal stability of perovskite solar cells.

Inorganic and Layered Perovskites for Optoelectronic Devices.

Organic-inorganic halide perovskites are making breakthroughs in a range of optoelectronic devices. Reports of >23% certified power conversion efficiency in photovoltaic devices, external quantum efficiency >21% in light-emitting diodes (LEDs), continuous-wave lasing and ultralow lasing thresholds in optically pumped lasers, and detectivity in photodetectors on a par with commercial GaAs rivals are being witnessed, making them the fastest ever emerging material technology. Still, questions on their toxicity and long-term stability raise concerns toward their market entry. The intrinsic instability in these materials arises due to the organic cation, typically the volatile methylamine (MA), which contributes to hysteresis in the current-voltage characteristics and ion migration. Alternative inorganic substitutes to MA, such as cesium, and large organic cations that lead to a layered structure, enhance structural as well as device operational stability. These perovskites also provide a high exciton binding energy that is a prerequisite to enhance radiative emission yield in LEDs. The incorporation of inorganic and layered perovskites, in the form of polycrystalline films or as single-crystalline nanostructure morphologies, is now leading to the demonstration of stable devices with excellent performance parameters. Herein, key developments made in various optoelectronic devices using these perovskites are summarized and an outlook toward stable yet efficient devices is presented.

Regeneration of Mouse Skin Melanocyte Stem Cells In Vivo and In Vitro.

Coordinated regeneration of melanocyte stem cells (McSCs) and hair follicle stem cells (HSCs) contributes to generation of pigmented hairs. Synchronous regeneration of McSCs with activation of HSCs occurs not only during initiation of a new hair cycle in vivo but also during reconstitution of hair follicles in vitro. The duration of the quiescent state of these stem cells becomes longer and longer in lifespan of mammals, leading to a decreased regenerative ability to form hair follicles. Here, we describe methods to activate McSCs during hair follicle regeneration in vivo, and isolate melanocytes from neonatal mouse skin to generate an immortalized cell line of melanocyte progenitors in vitro, aiming to use them for studying melanogenesis and future clinical application.

Mixed Lead-Tin Halide Perovskites for Efficient and Wavelength-Tunable Near-Infrared Light-Emitting Diodes.

Near-infrared (NIR) light-emitting diodes (LEDs), with emission wavelengths between 800 and 950 nm, are useful for various applications, e.g., night-vision devices, optical communication, and medical treatments. Yet, devices using thin film materials like organic semiconductors and lead based colloidal quantum dots face certain fundamental challenges that limit the improvement of external quantum efficiency (EQE), making the search of alternative NIR emitters important for the community. In this work, efficient NIR LEDs with tunable emission from 850 to 950 nm, using lead-tin (Pb-Sn) halide perovskite as emitters are demonstrated. The best performing device exhibits an EQE of 5.0% with a peak emission wavelength of 917 nm, a turn-on voltage of 1.65 V, and a radiance of 2.7 W Sr-1 m-2 when driven at 4.5 V. The emission spectra of mixed Pb-Sn perovskites are tuned either by changing the Pb:Sn ratio or by incorporating bromide, and notably exhibit no phase separation during device operation. The work demonstrates that mixed Pb-Sn perovskites are promising next generation NIR emitters.

A new dynamic culture device suitable for rat skin culture.

Cultured skin has been used extensively for testing therapeutic drugs because it replicates the physical and biochemical properties of whole skin. However, traditional static culture cannot fully maintain cell viability and skin morphology because of the limitations involved with nutrient transmission. Here, we develop a new dynamic perfusion platform for skin culture and compare it with a static culture device. Rat skins were cultured in either static or dynamic condition for 0, 3, 6, 9 and 12 days. H&E, periodic acid-Schiff (PAS) and picrosirius red (PSR) staining were used for skin morphology detection, immunostaining against cytokeratin 10 (CK10) for differentiation detection, immunostaining against proliferating cell nuclear antigen (PCNA) for cell proliferation detection and TUNEL staining for apoptosis detection. After culturing for 12 days, the epidermis, basement membrane, hair follicles and connective tissue were disrupted in the static group, whereas these features were preserved in the dynamic group. Moreover, compared to the static group, proliferation in the epidermis and hair follicles was significantly improved and apoptosis in dermis was significantly decreased in the dynamic group. These findings suggest that our device is effective for extending the culture period of rat skin to maintain its characteristics and viability in vitro.

Regulation of melanocyte stem cells in the pigmentation of skin and its appendages: Biological patterning and therapeutic potentials.

Skin evolves essential appendages and indispensable types of cells that synergistically insulate the body from environmental insults. Residing in the specific regions in the skin such as epidermis, dermis and hair follicle, melanocytes perform an array of vital functions including defending the ultraviolet radiation and diversifying animal appearance. As one of the adult stem cells, melanocyte stem cells in the hair follicle bulge niche can proliferate, differentiate and keep quiescence to control and coordinate tissue homeostasis, repair and regeneration. In synchrony with hair follicle stem cells, melanocyte stem cells in the hair follicles undergo cyclic activation, degeneration and resting phases, to pigment the hairs and to preserve the stem cells. Disorder of melanocytes results in severe skin problems such as canities, vitiligo and even melanoma. Here, we compare and summarize recent discoveries about melanocyte in the skin, particularly in the hair follicle. A better understanding of the physiological and pathological regulation of melanocyte and melanocyte stem cell behaviours will help to guide the clinical applications in regenerative medicine.

Outdoor Measurement and Modeling of Perovskite Module Temperatures.

Photovoltaic cells and modules are exposed to partially rapid changing environmental parameters that influence the device temperature. The evolution of the device temperature of a perovskite module of 225 cm2 area is presented during a period of 25 days under central European conditions. The temperature of the glass-glass packaged perovskite solar module is directly measured at the back contact by a thermocouple. The device is exposed to ambient temperatures from 3 to 34 °C up to solar irradiation levels exceeding 1300 W m-2. The highest recorded module temperature is 61 °C under constant high irradiation levels. Under strong fluctuations of the global solar irradiance, temperature gradients of more than 3 K min-1 with total changes of more than 20 K are measured. Based on the experimental data, a dynamic iterative model is developed for the module temperature evolution in dependence on ambient temperature and solar irradiation. Furthermore, specific thermal device properties that enable an extrapolation of the module response beyond the measured parameter space can be determined. With this set of parameters, it can be predicted that the temperature of the perovskite layer in thin-film photovoltaic devices is exceeding 70 °C under realistic outdoor conditions. Additionally, perovskite module temperatures can be calculated in final applications.