Self-Assembled DNA Machine and Selective Complexation Recognition Enable Rapid Homogeneous Portable Quantification of Lung Cancer CTCs.

In this study, we systematically investigated the interactions between Cu2+ and various biomolecules, including double-stranded DNA, Y-shaped DNA nanospheres, the double strand of the hybridization chain reaction (HCR), the network structure of cross-linked HCR (cHCR), and small molecules (PPi and His), using Cu2+ as an illustrative example. Our research demonstrated that the coordination between Cu2+ and these biomolecules not only is suitable for modulating luminescent material signals through complexation reactions with Cu2+ but also enhances signal intensities in materials based on chemical reactions by increasing spatial site resistance and local concentration. Building upon these findings, we harnessed the potential for signal amplification in self-assembled DNA nanospheres and the selective complexation modulation of calcein in conjunction with the aptamer targeting mucin 1 as a recognition probe. We applied this approach to the analysis of circulating tumor cells, with the lung cancer cell line A549 serving as a representative model. Our assay, utilizing both a fluorometer and a handheld detector, achieved impressive detection limits of ag/ml and single-cell levels for mucin 1 and A549 cells, and this approach was successfully validated using 46 clinical samples, yielding 100% specificity and 86.5% sensitivity. Consequently, our strategy has paved the way for more portable and precise disease diagnosis.

Biomolecules-mediated electrochemical signals of Cu2+: Y-DNA nanomachines enable homogeneous rapid one-step assay of lung cancer circulating tumor cells.

This study presents a straightforward efficient technique for extracting circulating tumor cells (CTCs) and a rapid one-step electrochemical method (45 min) for detecting lung cancer A549 cells based on the specific recognition of mucin 1 using aptamers and the modulation of Cu2+ electrochemical signals by biomolecules. The CTCs separation and enrichment process can be completed within 45 min using lymphocyte separation solution (LSS), erythrocyte lysis solution (ELS), and three centrifugations. Besides, the influence of various biomolecules on Cu2+ electrochemical signals is comprehensively discussed, with DNA nanospheres selected as the medium. Three single-stranded DNA sequences were hybridized to form Y-shaped DNA (Y-DNA), creating DNA nanospheres. Upon specific capture of mucin 1 by the aptamer, most DNA nanospheres could form complexes with Cu2+ (DNA nanosphere-Cu2+), significantly reducing the concentration of free Cu2+. Our approach yielded the limit of detection (LOD) of 2 ag/mL for mucin 1 and 1 cell/mL for A549 cells. 39 clinical blood samples were used for further validation, yielding results closely correlated with pathological, computed tomography (CT) scan findings and folate receptor-polymerase chain reaction (FR-PCR) kits. The receiver operating characteristic (ROC) curve displayed an area under the curve (AUC) value of 0.960, demonstrating 100% specificity and 93.1% sensitivity for the assay. Taken together, our findings indicate that this straightforward and efficient pretreatment and rapid, highly sensitive electrochemical assay holds great promise for liquid biopsy-based tumor detection using CTCs.

Controllable self-assembled DNA nanomachine enable homogeneous rapid electrochemical one-pot assay of lung cancer circulating tumor cells.

A homogeneous rapid (45 min) one-pot electrochemical (EC) aptasensor was established to quantitatively detect circulating tumor cells (CTCs) in lung cancer patients using mucin 1 as a marker. The core of this study is that the three single-stranded DNA (Y1, Y2, and Y3) could be hybridized to form Y-shaped DNA (Y-DNA) and further self-assemble to form DNA nanosphere. The aptamer of mucin 1 could be complementary and paired with Y1, thus disrupting the conformation of the DNA nanosphere. When mucin 1 was present, the aptamer combined specifically with mucin 1, thus preserving the DNA nanosphere structure. Methylene blue (MB) acted as a signal reporter, which could be embedded between two base pairs in the DNA nanosphere to form a DNA nanosphere-MB complex, reducing free MB and resulting in a lower electrochemical signal. The results demonstrated that the linear ranges for mucin 1 and A549 cells were 1 ag/mL-1 fg/mL and 1-100 cells/mL, respectively, with minimum detectable concentrations were 1 ag/mL and 1 cell/mL, respectively. The quantitative analysis of CTCs in 44 clinical blood samples was performed, and the results were consistent with the computerized tomography (CT) images, pathological findings and folate receptor-polymerase chain reaction (FR-PCR) kits. The receiver operating characteristic (ROC) curve exhibited an area under the curve (AUC) value of 0.970. The assay revealed 100% specificity and 94.1% sensitivity. It is believed that this electrochemical aptasensor could provide a new approach to detect CTCs.

Sensitive Urine Immunoassay for Visualization of Lipoarabinomannan for Noninvasive Tuberculosis Diagnosis.

Lipoarabinomannan (LAM) is a prospective noninvasive biomarker for tuberculosis (TB) diagnosis. Here, we report a visual immunoassay of high sensitivity for detecting LAM in urine samples toward TB diagnosis. This method uses a DNA-linked immunosorbent of LAM, followed by a transduction cascade into amplified visual signals using quantum dots (QDs) and calcein reaction with Cu2+ and copper nanoparticles (Cu NPs). The limit of detection (LOD) for LAM in the urine reaches 2.5 fg/mL and 25 fg/mL using a fluorometer and length readouts on strips, respectively, demonstrating an ultrahigh sensitivity. The clinical validation of the proposed assay was performed with 147 HIV-negative clinical urine specimens. The results show the sensitivity of test is 94.1% (16/17) for confirmed TB (culture-positive) and 85% (51/60) for unconfirmed TB (clinical diagnosis without positive culture results), respectively, when the test cutoff value is 40 fg/mL for TB. Its specificity is 89.2% (25/28) in non-TB and nontuberculous mycobacterial patients. The area under the curve (AUC) was 0.86 when controls were non-TB and LTBI patients, while the AUC was 0.92 when controls were only non-TB patients. This highly sensitive visual immunoassay of LAM has shown potential for noninvasive diagnosis of TB using urine samples.

Fluorescence Aptasensor of Tuberculosis Interferon-γ in Clinical Samples Regulated by Steric Hindrance and Selective Identification.

Although there are many interferon gamma (IFN-γ)-based tools for tuberculosis (TB) diagnosis, they are less sensitive and laborious. Here, we developed an IFN-γ aptasensor using pyrophosphate-cerium coordination polymeric nanoparticles (PPi-Ce CPNs) as signal reporters and a double-stranded DNA as a probe. The sensor was realized by sterically regulating the polymerization elongation of terminal deoxynucleotidyl transferase (TdT) and the selective recognition reaction of PPi-Ce CPNs. This method employs PPi-Ce CPNs to selectively identify Cu2+ and polyT-templated copper nanoparticles (Cu NPs), as well as a TdT-assisted amplification technique. Our data showed that under optimized experimental conditions, a limit of detection of as low as 0.25 fg/mL was achieved, with a linear range of 1-100 fg/mL, and a good target protein specificity. The detection sensitivity was an order of magnitude higher than that observed with Cu NPs when used as signal reporters. This IFN-γ quantification technique was further validated in clinical samples using 57 clinical TB patients (22 negative and 35 positive). Our findings agreed with those from enzyme-linked immunosorbent assay, GeneXpert MTB/rifampin assay, and polymerase chain reaction detection of TB-DNA and those from clinical imaging techniques. Therefore, our analytical system may provide an additional and more sensitive tool for the early diagnosis of TB.

Homogeneous Visual and Fluorescence Detection of Circulating Tumor Cells in Clinical Samples via Selective Recognition Reaction and Enzyme-Free Amplification.

Here we report a simple all-nucleic-acid enzyme-free catalyzed hairpin assembly assisted amplification strategy with quantum dots (QDs) as the nanoscale signal reporter for homogeneous visual and fluorescent detection of A549 lung cancer cells from clinical blood samples. This work was based on the phenomenon that CdTe QDs can selectively recognize Ag+ and C-Ag+-C and by using mucin 1 as the circulating tumor cells (CTCs) marker and aptamer as the recognition probe. Under optimized conditions, the limits of detections as low as 0.15 fg/mL of mucin 1 and 3 cells/mL of A549 cells were achieved with fluorescence signals. A 1 fg/mL concentration of mucin 1 and 100 cells/mL of A549 can be distinguished by the naked eye. This method was used to quantitatively analyze CTCs in 51 clinical whole blood samples of patients with lung cancer. The levels of CTCs detected in clinical samples by this method were consistent with those obtained using the folate receptor-polymerase chain reaction clinical test kit and correlated with radiologic and pathological findings.

Quantification of 13C, 15N labelled compounds with 13C, 15N edited 1H Nuclear Magnetic Resonance spectroscopy.

It was significant to detect isotope labelled compounds in biology and pharmacy. Based on a novel 1H Nuclear Magnetic Resonance (1H-NMR) technique, a simple, fast and green method has been successfully established to quantitatively detect 13C, 15N isotope labelled compounds. In this protocol, the couples between 1H and 13C, 15N nearby were removed, which greatly simplified the spectrum. At mean time, the multiple peaks led by 13C and 15N were combined into one peak, so the signal intensity was also significantly enhanced. Melamine was selected as the internal standard and five 13C, 15N isotope labelled compounds showed excellent linearity from 0.001 mM to 100 mM. A real polypeptide sample has quantitatively been detected.